日本メカケミカル Product Lineup

●Specialized for cleaning uncured oil-based UV resin for 3D printers. ●It has no flash point as it is water-based (non-hazardous). ●Low odor, making it easy to handle. ●Low viscosity allows for easy cleaning of intricate shapes. ●For pre-washing, NFixa Soft is recommended. ●For cleaning resin from light-curing 3D printers, the aerosol type 3DPR Detail Shape Cleaner is also recommended.

• Cleaning agents

- It is specialized for cleaning uncured oil-based UV resin for 3D printers. - It does not have a flash point because it is water-based (non-hazardous material). - Due to the UV transmission inhibitor, resin curing products are less likely to occur in the liquid. - It has a low odor, making it easy to handle. - NFxia Pure is recommended for final rinsing. - The aerosol type 3DPR Detail Shape Cleaner is also recommended for cleaning resin from light-curing 3D printers.

• Cleaning agents

● Easily removes rice husk stuck to agricultural machinery. ● Can also remove oil stains, mud, and dust at the same time. ● Being a gel type, it is less likely to drip on vertical surfaces while maintaining cleaning effectiveness.

• Cleaning agents

● It powerfully dissolves gas and tar that adhere to molds after resin molding. ● It has a moderate drying time that is neither too fast nor too slow, ensuring sufficient penetration time for dirt and effectively dissolving it.

• Cleaning agents

● This is a powerful press oil suitable for processing stainless steel materials. ● It has a high viscosity and is resistant to film breakage. ● It can accommodate high-precision and difficult machining.

• Lubricants

● Removes rice husk stains from the surface of agricultural machinery and equipment. ● Can be diluted with water for use depending on the degree of dirt.

• Cleaning agents

● Since it is in gel form, it is less likely to drip on vertical surfaces, allowing sufficient time for penetration and reaction with rust. ● It is a neutral type, so there is no concern about excessive corrosion.

• Cleaning agents

● Strengthened prevention of adhesion of residue and scrap (increased mold lifespan) ● Capable of ultra-precision machining, high-precision machining, and difficult machining ● Excellent corrosion resistance and degreasing properties ● Chlorine-free and deodorizing type, environmentally friendly press processing lubricant for the Earth and workplace

• Lubricants

● This is a workwear detergent specifically designed for oil stains on work clothes. ● It works effectively with just a spray application. ● It also eliminates oil odors.

• detergent

- Removes gas residue that adheres to molds after plastic molding. - No waste liquid is generated as it is used for application and wiping. - Removes aluminum alloy that adheres to aluminum die-cast molds.

• Cleaning agents

● Chlorine-free, high-precision processing, suitable for difficult machining with enhanced lubrication type. ● It is less likely to drip from the application surface, making it recommended for spinning and die drawing processes.

• Lubricants

●It is a powerful rust remover of a neutral type. ●It can treat rust in a short time (about 10 minutes) without damaging the metal surface. ●It does not dull the shine of the metal surface, nor does it cause discoloration to a copper color. ●It can be diluted with water (up to 4 times) depending on the degree of rust occurrence. ●It is not flammable or explosive. ●It is suitable for removing rust from products that are sensitive to hydrogen embrittlement.

• Cleaning agents

● For cleaning narrow and detailed areas! - Target narrow gaps with the nozzle! (For larger surfaces, continue using the cleaning machine and cleaning agents as before.) ● Before cleaning the printed objects! By using it before cleaning the printed objects with a cleaning machine or brush (pre-wash), the amount of uncured resin brought into the cleaning solution is significantly reduced, improving the cleaning efficiency of the cleaning machine and brush! The lifespan of the cleaning solution is also extended, reducing the hassle of replacement and waste disposal! ● After cleaning the printed objects! It can also be used to clean uncured resin that could not be removed during cleaning with a cleaning machine or brush! Achieve a thorough clean with a final rinse! ● Can also be used for cleaning tools! - Suitable for cleaning tools such as build plates, scrapers, and trays!

• 3D Printer

● The powerful degreasing cleaning ability of alkaline components and citrus oils quickly removes stubborn stains such as grease, wax, machine oil, and animal and vegetable oils. ● Being water-soluble, there is no risk of ignition. ● It can be diluted according to the type of dirt, making it economical.

• Cleaning agents

● It has low viscosity and excellent lubricity. ● It is a formulation suitable for aluminum processing. ● It can also be used for processing copper and iron-based materials.

• Lubricants

The non-ferrous Mecha Tap Gel is a completely new drilling and tapping oil that solves problems such as liquid dripping and the degreasing properties of conventional tapping oils used in drilling and tapping processes. 【Features】 (1) It adheres firmly to the cutting edge and pilot holes, making it less likely to drip, which improves workability compared to oil types. (2) It is plant oil-based and is a cutting oil for drilling and tapping non-ferrous materials (aluminum and copper). (3) It has superior degreasing properties compared to pastes. (4) It produces less odor during processing. *Samples are available. Please feel free to consult us.

• Cutting Oil

The "Meca Dry Press DHI-1" is a drying type (chlorine-free) press processing lubricant. After application, the oil gradually evaporates, making it easy to degrease after processing due to its micro-residue type. Additionally, by optimizing the formulation of extreme pressure additives (sulfur-based, phosphorus-based), it demonstrates good lubrication performance even in the processing of stainless steel materials. 【Features】 ■ Oil gradually evaporates after application ■ Easy degreasing after processing due to its micro-residue type ■ Good lubrication performance in the processing of stainless steel materials due to the optimization of extreme pressure additives (sulfur-based, phosphorus-based) *For more details, please refer to the related links or feel free to contact us.

• Lubricants

"MEKA EKO PRESS HI-L53" is a lubrication-enhanced type of press processing lubricant. It appears as a yellow-brown liquid with a specific gravity (at 15°C) of 0.98. The components include vegetable oil, mineral oil, and extreme pressure additives (sulfur, phosphorus). It can be used for applications such as deep drawing, bending, punching, and drawing of stainless steel materials. Please feel free to contact us if you have any inquiries. 【Features】 ■ Lubrication-enhanced type of press processing lubricant ■ Compatible with high precision and difficult processing ■ Suitable for deep drawing and drawing processing of stainless steel *For more details, please refer to the related links or feel free to contact us.

• Lubricants

Oil burning of steel materials tends to occur during the rainy season and the following high-temperature and high-humidity period. Since oil burning changes the surface appearance of the base material and cannot be easily removed with cleaning agents, countermeasures are necessary. In the catalog below, we introduce the principles of oil burning and recommend CP-4000 as a countermeasure!

• Rust Inhibitor

It is an oil-based cleaner with low odor, ideal for removing oil stains such as press oil and rust prevention oil.

• detergent

● The GHS classification for "skin corrosion/irritation" and "serious eye damage/eye irritation" does not fall under Category 1. ● It exhibits defoaming properties when heated. ● It is suitable for cleaning iron, stainless steel, and aluminum materials. ● There is no risk of flammability due to its water solubility. ● It can be diluted according to the level of dirt, making it economical.

• Cleaning agents

【CP-CU】 ● The oil component strongly adsorbs to the surface, suppressing corrosion and discoloration of copper and copper alloys. ● It has a low dynamic viscosity (below 4 mm²/s) and forms an extremely thin soft oil film (1-2 µm), leaving no stickiness. ● The effective period for discoloration suppression is approximately 3 months (indoors). However, this may vary depending on usage conditions. ● It has excellent degreasing properties and can be easily removed with hydrocarbon-based cleaning agents. 【CP-CU-D】 Fast-drying type of the above product ● The oil component strongly adsorbs to the surface, suppressing corrosion and discoloration of copper and copper alloys. ● It has a low dynamic viscosity (below 2 mm²/s) and forms an extremely thin soft oil film (1-2 µm), drying to the touch in 10-15 minutes after application. ● The effective period for discoloration suppression is approximately 3 months (indoors). However, this may vary depending on usage conditions. ● It has excellent degreasing properties and can be easily removed with hydrocarbon-based cleaning agents.

• Rust Inhibitor

【Meca Solvent #300】 ● Can wash away water-soluble cutting fluids adhered to the workpiece after processing. ● Does not contain chlorine, fluorine, or bromine-based solvents. ● Fast-drying type. [Drying time for 1ml of liquid dropped on a flat surface: approximately 30 minutes] 【Meca Solvent #700】 ● Ideal for washing away water-soluble cutting fluids adhered to the workpiece after processing. ● Can also wash away oil-based cutting fluids adhered to the workpiece after processing. ● Can also clean blue ink and oil-based markers. ● Slow-drying type. [Drying time for 0.15g of liquid dropped on a flat surface: approximately 40 minutes] Recommended for preventing discoloration of aluminum.

• Cleaning agents

【Features】 ● By improving discoloration prevention performance for copper and aluminum-based materials, it reduces liquid discoloration and workpiece discoloration when processing these materials. ● It eliminates accuracy issues caused by heat generation, significantly extends tool life, and enhances productivity. ● Incorporating our unique anti-corrosion mechanism has made long-term use of coolant possible.

• Cutting Oil

【Features】 ● Rust prevention period: Approximately 1 year outdoors (when applied at 11μm) (Note: This may vary depending on usage conditions) ● Easy to apply due to its low viscosity liquid. ● The thin white liquid dries to form a transparent hard coating, demonstrating rust prevention capabilities outdoors. ● Easy-to-apply spray type: This is the concentrated type of Mecha Strong Coat.

• Rust Inhibitor

【Mecha Cleaner】 For cleaning oil stains on machine tools and equipment. 【Mecha Super Cleaner】 For cleaning stubborn grease and oil stains on factory machinery and tool parts. Powerful. 【Mecha Pika Foam】 A powerful cleaning agent that is less likely to drip. Effective for removing dirt from machine tools and plant oils. 【Cleaning Agent of the Day】 For cleaning stubborn grease and oil stains on factory machinery and tool parts. Reasonably priced. 【Mecha Eco Cleaner N】 A neutral type multi-purpose cleaner. Removes oil stains from machines and tools. For cleaning in factories, cafeterias, and offices.

• Cleaning agents

【CP-3】 Super low odor and smooth, not sticky! It is smooth, so a small amount can be applied over a wide area. 【CP-10】 Excellent water displacement! It is also less likely to cause oil burning. 【CP-4000】 Can be used for rust prevention of export products. Suitable for long-term indoor rust prevention. Perfect for preventing oil burning!

• Rust Inhibitor

For temporary rust prevention of various metals. Use diluted with water. 【Features】 ● Can be used with water dilution, making it economical. Features vary by part number. For details, please check our company website.

• Lubricants

For lubrication during various metal pressing processes. Chlorine-free, dry type Mecha Dry Press series. *Free samples are available. Please feel free to contact us. 【Features】 ● This is a chlorine-free pressing lubricant. ● The oil content gradually evaporates after application.

• Lubricants

For lubrication during various metal pressing processes. Chlorine-free, completely dry Mecha Mach Dry series. *Free samples are currently available. Please feel free to contact us. 【Features】 ● A chlorine-free pressing lubricant. ● The oil gradually evaporates after application. ● No need for degreasing after processing due to its residue-free type.

• Lubricants

【Features】 Suppression of foaming in water-soluble cutting and grinding fluids. *For more details, please contact us.*

• Cutting Oil

【Features】 ● Can be used for storing iron and copper embedded parts or bimetals. ● Forms a low-tack soft oil film. ● The rust prevention period for iron (approximate) is 3 to 6 months for indoor storage (varies depending on material and usage conditions). ● The rust prevention period for copper (approximate) is 2 to 3 months for indoor storage (varies depending on material and usage conditions). ● The rust prevention film can be easily removed with oil-based cleaners. ● Compatible with metals other than iron and copper. *For details, please inquire. ● It's okay if water is present. Water-replaceable. ● Resistant to oil burning (discoloration of the workpiece). *For more details about the product, please download the catalog.

• Rust Inhibitor

For lubrication during various metal pressing processes, the chlorine-free Mecha Eco Press series is available. *Free samples are currently being accepted. Please feel free to consult with us. 【Features】 ● It is a chlorine-free pressing lubricant.

• Lubricants

For lubrication during various metal pressing processes, the water-soluble press oil series from Japan Mecha Chemical. 【Features】 ● Water-soluble, can be diluted with water, making degreasing and cleaning processes easier and more cost-effective. ● Easy to clean the surrounding area, keeping the workspace tidy. ● Non-hazardous, so there is no need to worry about the amount stored.

• Lubricants

Stainless steel deep drawing, punching, and bending processing, chlorine-free press processing lubricant 【Features】 ● A press processing lubricant that excels in lubrication and is a lubrication-enhancing type. ● A chlorine-free and deodorizing type, this press processing lubricant is environmentally friendly for both the planet and the workplace. ● An excellent degreasing press processing lubricant that can remove 80-90% of oil content with just hot water.

• Lubricants

Stainless deep drawing and drawing processing, chlorine-free press processing lubricant 【Features】 ● Suitable for deep drawing and drawing processing of stainless steel materials. ● Enhanced oil film + enhanced lubrication type for high precision and difficult processing.

• Lubricants

For the removal of stainless steel scale after welding. It is also possible to remove burrs from laser-processed stainless steel. 【Features of SuspiCut W-01】 ● Effectively removes stainless steel scale and welding discoloration with powerful dissolving capability. 【Features of SuspiCut W-04】 ● Effectively removes stainless steel scale and welding discoloration with powerful dissolving capability. ● Due to enhanced removal performance, it can also be used for burr removal after laser processing.

• Other consumables

This is an acidic type rust remover (discoloration remover) for copper. 【Features of KC-12A】 ● It is mainly composed of phosphoric acid, which has less impact on the human body and surrounding metals compared to hydrochloric acid and nitric acid. ● It can treat rust in a short time (1 to 10 minutes) without damaging the surface of copper or brass. ● It can be diluted with water (2 to 10 times) and is non-flammable and non-explosive. 【Features of Mekarins Cu-940】 ● It removes the oxide film from the surface of brass in a short time (20 seconds to 2 minutes). ● It results in a good glossy finish. ● It maintains its shine even after washing with water. 【Features of Mekarins Cu-980】 ● It removes the oxide film from the surface of copper. ● It results in a good glossy finish. ● It maintains its shine even after washing with water.

• Other consumables

This is a neutral rust remover from Nippon Mecha Chemical. 【Features of Mecha Ecolast N】 ● There are no hazards such as flammability or explosiveness. ● It is suitable for rust removal on products that are sensitive to hydrogen embrittlement. 【Features of Mecha Clean Rust N】 ● There are no hazards such as flammability or explosiveness. ● It removes rust without excessively damaging the metal surface.

• Other consumables

Introducing various industrial hand washing detergents from Nippon Mecha Chemical! 【Marine Aero】 A refreshing scented and reasonably priced hand washing detergent♪ 【Mecha Hand Soft】 A hand washing detergent popular among women for its moisturizing properties♪ 【Mecha Hand Make】 For those who want to thoroughly remove stubborn oil stains with excellent cleaning power♪ 【Mecha Hand Magic】 For those concerned about sink stains, with dissolving scrubs♪ 【Mecha Hand Soap A】 For those concerned about sink stains, without scrubs♪ 【Mecha Hand MP】 A hand washing detergent particularly recommended for ink stains♪ *If you would like a sample, please feel free to contact us!

• Cleaning agents

【Features】 ● This hand wash detergent was developed to remove ink stains that adhere to hands during printing work. ● It effectively dissolves ink and uses special scrub micro-particles to thoroughly clean dirt embedded in fingerprints. ● Orange fragrance.

• Cleaning agents

【Features】 ● This hand soap has a powerful cleaning ability against oil stains and ink while being gentle on both people and nature. ● It does not use microplastics and instead utilizes food scrubs. These scrubs dissolve in water, making it recommended for those concerned about sink stains. ● It provides moisturizing effects, leaving the skin feeling soft and hydrated.

• Cleaning agents

【Features】 ● A hand soap that maintains powerful cleaning ability against oil stains and ink while being gentle on people and nature. ● Made with plant-based scrubs using walnut shells instead of microplastics, it breaks down by microorganisms when it flows into rivers and oceans, returning to nature. ● Excellent moisturizing properties, very popular among those concerned about dry hands, especially women. ● Creamy and mild texture, providing an exceptional washing experience. ● Scent of soap.

• Cleaning agents

【Features】 ● This is an industrial hand washing detergent that effectively removes machine oil and ink stains from hands with powerful cleaning ability. ● The inclusion of special scrub micro-particles thoroughly cleans dirt from fingerprints. ● Orange scent.

• Cleaning agents

【Features】 ● Effectively removes machine oil and ink stains from hands with powerful degreasing cleaning ability. ● No worries about pipe clogs from scrubbing. ● Scent of soap.

• Cleaning agents