ダイショウ Product Lineup

A rotating blade strip machine that cuts into cables while the blade rotates. The cut surface is finished very neatly. 【Features】 - Easy key operation to set the blade penetration amount, semi-strip length, and blade rotation speed - Sharp cut surface due to rotary slide mechanism - Standard equipped with centering bearings - Capable of registering 300 sets of data - Enhanced operation screen with a 5.7-inch color touch panel - Supports three languages (Japanese/English/Chinese) with display switching - Wire type selection mode included (WL1, WL2, IV, KIV, KIP, VCTF / wire type names can be changed) - Standard equipped with QR code system - New clamp system with 1.5 times faster opening and closing compared to conventional machines - Dual stopper system

• Other processing machines

■ Compact and safe manual cable fusion machine ■ Energy-saving, usable with household AC 100V ■ Achieves stable temperature control with microcomputer-based temperature control and double ceramic heaters ■ Operation time and notifications can be set arbitrarily with timer, buzzer, and lamp display ■ Excellent mass production capability, can be used with multiple jigs and by many people with one unit ■ No unwanted radiation such as noise

• Other processing machines

The NHC-1250W is a model designed with a minimum configuration of 24 points (12 circuits), but it is equipped with almost all the necessary functions for harness multi-testing. It is the ideal product for inspecting a variety of low-circuit products. 【Features】 - Automatically sets inspection conditions such as applied voltage, cutoff current, and insulation resistance values just by calling up the product name. - Adopts PWM method to achieve stable testing unaffected by fluctuations in commercial power supply. - Applies high voltage by group based on stored circuit data, significantly reducing inspection time. - Consolidates testing functions for continuity, momentary disconnection, low resistance, dielectric strength, and insulation resistance into one unit, saving installation space. - Confirms contact between one-sided connectors and open lead terminals with a search probe to detect miswiring. - This product supports AC 90-250V, making it safe to use even overseas.

• Other inspection equipment and devices

■Tensile strength measurement of electric wires, optical fibers, and wires, etc. ■Adhesion strength measurement of terminals and housings ■Adhesion strength measurement of electric wires and terminals ■Destructive testing is also possible

• Other inspection equipment and devices

The standard model "SP Series" with thermal printing has been updated with new software. It is equipped with a variety of new features to meet customer needs. 【Features】 - A unit attached to the work guide section allows for one-handed work insertion. - It is equipped with a higher performance motor and a new thermal head compared to previous models, resulting in a 10% faster printing speed (for SPX01S). - It can directly import and print data linked with CAD data from other companies. (ECAD Solutions/WIRE CAM DX, Alpha Tech/ACAD-DENKI) - The display language supports two languages: Japanese and English, making it easier to use in overseas factories.

• Other markings

【Features】 ■ High-speed repetitive testing ■ Easy to handle as no operations are required other than turning the power switch on/off ■ Instant identification of good/bad products (disconnection, miswiring, short circuit) just by connecting the test item ■ Error indicator lamps for each circuit make it easy to identify faulty areas ■ Testing is possible even with branches in the test circuit ■ Up to 100 circuits can be tested by connecting two units together

• Other inspection equipment and devices

This is an inspection device using an AI camera that can be retrofitted to the Hermex semi-auto stocker STC-220/250 model to determine the quality of crimping. - Ensures reliable inspection of deep crimping, shallow crimping, biting, hanging, and core wire protrusion. - Compatible with wire seals and 0.8 mm pitch terminals. - Automatically saves all shots for retrieval and verification at any time. A PC is required for memory storage (existing PCs can also be used).

• Visual Inspection Equipment

MTP1 is a harness multi-tester that excels in environments that require strict quality control and prioritize productivity. With its high precision and stable inspection performance, it is the ideal product for customers seeking both reliability and productivity. - Continuity testing (open circuit, short circuit, miswiring) - Instantaneous open circuit testing (loose contact) - Low resistance testing - Dielectric strength testing - Insulation resistance testing 【Features】 ■ Automatically sets inspection conditions such as applied voltage, cutoff current, and insulation resistance value just by calling up the product name. ■ Capable of stable output testing due to high voltage generation by a DC-AC inverter, unaffected by fluctuations in commercial power supply. ■ Significantly reduces inspection time by applying high voltage to groups based on stored circuit data. ■ Consolidates continuity, cutoff, low resistance, dielectric strength, and insulation resistance testing functions into one unit, saving installation space. ■ Detects miswiring by confirming contact between one side connector and open lead terminals with a search probe. ■ Expandable from 64P to 128P, 192P, and 256P with board expansion. ■ This product supports AC 90-240V, making it safe for use overseas.

• Other inspection equipment and devices

【Features】 ■ There is no need to twist the ends of the wires in advance; multiple wires can be twisted at once. ■ There is no wire breakage or fraying after twisting. ■ It can be used with a standard household 100V power supply, making it versatile for different locations. ■ It has a compact and lightweight design with safety features to prevent fingers from getting caught.

• Other processing machines

The Z-cutter is designed to insert the blade between the sheath and the core from the end of the cable. It makes the longitudinal stripping of the outer sheath of long cables easier.

• Other work tools

A tabletop electric device for intermediate stripping of single wires or cable cores. It cuts simultaneously with two horizontal blades and one vertical blade using a start switch, allowing for easy removal of insulation by making incisions. 【Features】 - Can be used for various applications such as core branching of tunnel harnesses, automotive harnesses, and grounding branches of shielded cables. - Adopts an easily replaceable attachment-type blade. - HMS-related blade types can be attached, allowing for shared use with HMS-related applications. - The blade type has a disassembled structure, enabling replacement of consumables. - User-specific press molds can also be used.

• Other work tools

A manual tool for intermediate stripping or terminal stripping of single wires or cable cores. It is a tool that simultaneously cuts with horizontal and vertical blades to easily score the insulation for removal. 【Features】 ■ Can be used for various applications such as core branching in tunnel harnesses, automotive harnesses, and grounding branches for shielded cables. ■ Being a manual tool, it can be easily used on-site. ■ Vertical scores are made on the sides of the core wire, allowing for easy removal of the insulation. ■ There are models available according to specifications and applications, such as wire outer diameter, intermediate stripping, and terminal stripping.

• Other work tools

【Features】 ■ Low noise, energy-saving, and reduced power consumption during standby ■ Manual adjustments with a handle are still possible as before ■ By installing an optional conversion kit, it can be connected to applicators from various manufacturers

• Crimp Terminal

By adopting an inverter system, we have achieved low noise levels and power savings during standby. This is a compact crimping machine that offers high-quality crimping processing at a competitive price while maintaining high performance. The attachments are limited to the RA12/AA13 one-touch base (JAM specification) only. *Attachments for the CM-1500 series and CM-3000D series are not interchangeable.

• Crimp Terminal

This product is used for winding wires when installed on devices such as KRE type, PRS type, and ERS type. The flap is designed to open and close, allowing for easy removal of the wound wire bundle afterward. In addition to standard sizes, custom dimensions can also be manufactured. There is also a special specification for a width-adjustable (PRW) winding umbrella.

• Other processing machines

This machine is a manual reel for winding wires into a bundle. It is used in conjunction with the PR-type winding umbrella. The winding diameter and other dimensions correspond to those of the PR-type folding umbrella. 【Features】 ■ Manual winding is possible by attaching the PR-type umbrella. ■ It can be fixed and moved with total lock casters. ■ The PR-type umbrella can be attached in various sizes.

• Other processing machines

This machine is a device that winds wires into a bundle in conjunction with machines from the SA series. It can also perform aligned winding with constant tension through slip control. 【Features】 ■ It can be equipped with a winding umbrella suitable for winding specifications. ■ Random and aligned winding can be achieved with pitch settings for the traverse function. ■ There is a standalone operating mode controlled by external deceleration and stop input signals. ■ It can wait for the traverser to return (1/4 to 8/4 rotations). ■ There is a function that automatically performs the winding of excess length after cutting with the linked cutting machine. ■ It has a function that automatically increases the rotational torque based on the winding amount.

• Other processing machines

This is a device that vertically rotates a winding parasol to wind electric wires into a bundle. The size of the winding parasol varies depending on the winding diameter, and the winding operation is performed using a foot switch. 【Features】 ■ The winding speed can be arbitrarily changed with a volume control. ■ The winding direction can be selected for left or right rotation using a switch. ■ There is a slip mechanism (rotational torque control) based on winding load. ■ The KRE-1000 has a function to turn the brake ON/OFF when rotation stops.

• Other processing machines

This device is equipped with a KRE model and a counter scale CS-6080, allowing for winding operations while measuring with a foot switch. 【Features】 ■ Winding can be done while measuring with the counter scale. ■ The counter scale can be manually moved back and forth, allowing for winding while traversing. ■ The winding speed can be changed arbitrarily using a volume control. ■ There is a slip mechanism (rotational torque control) due to winding load.

• Other processing machines

This is a supply device that draws electric wire from a bobbin and feeds it into cutting machines and other equipment. The wire is fed out in synchronization with the drawn speed through sag control using stepped rollers. 【Features】 ■ The bobbin is rotated using a Kere method for feeding. ■ The stepped rollers can absorb a maximum sag amount of 2400mm with three rows of grooves. ■ The feeding tension is maintained at a constant level by the "weight of the stepped rollers + weights." ■ The bobbin fixing method allows for quick setup using a centerless and push-cup method. ■ There is one contact each for external emergency stop input and output signals.

• Other processing machines

This is a wire stripper designed for intermediate stripping of strong electric cables such as CV cables, suitable for processing main wires in building harnesses. The wires processed by this machine have horizontal and vertical scratches, allowing the outer sheath to be easily stripped off by hand. 【Features】 ■ Capable of intermediate stripping of CV cables up to 250 sq ■ Easy manual removal of the outer sheath after scoring ■ Blade types with an attachment system can be exchanged with a single touch ■ Start-up with a two-handed lever switch emphasizing safety ■ Compact design allows for easy installation on processing lines ■ Short processing time of 3 to 6 seconds per cycle to improve processing efficiency ■ Blade reconfiguration is possible within the attachment

• Other processing machines

A versatile wire stripper capable of not only long stripping, split stripping, and end damage insertion but also fully automatic length measurement cutting, depending on the combination of attachment blade types. By attaching adjustable blades such as X blades, it can accommodate various sizes of round cables with just numerical input. 【Features】 ■ Special feeding belt securely grips the wire ■ Adjustable feeding pressure and stripping pressure ■ Split stripping function during long stripping is effective for closely adhered wires ■ Can be used as an automatic cutting machine by attaching cutting blades ■ By attaching cutting blades and stripping blades, it becomes a fully automatic machine for single-end stripping and length measurement cutting ■ If the stripping or cutting dimensions differ due to the hardness of the wire, correction can be made by inputting correction values ■ Stripping dimensions can be set only through numerical input on the touch panel, eliminating the need for dimension gauges ■ All settings are input via the touch panel ■ By attaching adjustable blades such as X blades and inputting the stripping blade spacing numerically, it can accommodate various sizes of round cables ■ Adopts a one-touch attachment system for easy blade type exchange

• Other processing machines

This is an electric wire stripper that easily performs terminal stripping processing for wires ranging from AWG14 to AWG30. By simply matching the AWG number, you can set the cutting depth of the stripping blade. You can easily switch between full stripping and partial stripping with a lever. 【Features】 ■ The stripping length can be adjusted from 1.0 to 20.0 mm without the need for dial lock operation, up to 20 mm. ■ Blade replacement is easy, straightforward, and reliable without adjustment. ■ Precise cutting depth settings can be made in increments of 0.02 mm with a single click. ■ The "cutter back" mechanism prevents damage to the core wire. ■ A diamond electroplated clamp that is resistant to chuck marks is standard. ■ Switching between stripping modes can be done with a single change lever.

• Other processing machines

It easily and efficiently handles complex terminal processing with a dedicated blade type. Each wire is inserted individually and started with a foot switch. You can switch between different blade types for processes such as sheath stripping, core terminal stripping, step stripping, and branch stripping. 【Features】 - The blade type is attachment-based and can be replaced in a short time. - Designed for specific processing specifications, it allows for complex stripping in one shot. - It can also handle stripping of deformed round cables and parallel wires with different branch stripping. - Applicable wires include round cables and flat cables with an outer diameter of up to φ10, as well as various special wires like fluorine and Teflon. - Optionally, it can perform stripping with residual waste.

• Other processing machines

The programmable stripping device 'B540' is ideal for processing coaxial cables, multi-core cables, and single-core cables. It can handle simple stranded cables and multi-core cables with a cross-sectional area of 0.75 to 85 mm² (18 to 0 AWG) and a diameter of up to 17 mm. 【Features】 ■ Strip length of less than 100 mm, raw material diameter of less than 17 mm ■ Clear high-resolution 7-inch color touchscreen ■ Fast and intuitive operation with the S.Drive B Series software, including new support features ■ Rotary cutting mechanism equipped with four blades for precise stripping ■ High-sensitivity trigger mechanism ■ No blade replacement required for all cables that can be processed ■ No mechanical adjustments needed when changing cables ■ Automatic cable feed ■ Diameter detection, cable end detection ■ Processing parameters compliant with mm² units and AWG standards ■ Continuous processing of multi-core cables stripping the sheath and internal conductors in a programmable sequence ■ Barcode scanner function

• Other processing machines

Equipped with three rotary-type blades, it strips coaxial, single-core, and multi-core cables with a conductor cross-section area ranging from 0.05 to 40 mm² (30~1 AWG) and a diameter of up to 12 mm (0.47 inches). It achieves a stripping length and peeling length of 50 mm. 【Features】 ■ Stripping length less than 50 mm, raw material diameter less than 12 mm ■ Clear high-resolution 7-inch color touchscreen ■ Fast and intuitive operation with S.Drive B Series software, including new support features ■ Rotary cutting mechanism with three blades for precise stripping ■ High-sensitivity trigger mechanism ■ No blade replacement required for all processable cables ■ No mechanical adjustment needed when replacing cables ■ Automatic cable feed ■ Diameter detection, cable end detection ■ Processing parameters compliant with mm² units and AWG standards ■ Continuous processing of multi-core cables stripping sheath and internal conductors in a programmable sequence ■ Barcode scanner function

• Other processing machines

Equipped with four rotating X blades, it performs stripping of simple twisted wires and multi-core cables with a cross-sectional area of 0.013 to 16 mm² (36 to 5 AWG) and a diameter of up to 9 mm (0.35 inches). It is particularly suitable for clean stripping of demanding materials such as thin sheaths, Kapton, Teflon®, and fiberglass braiding, as well as for clear twisting of conductors. 【Features】 ■ Clear high-resolution 5-inch color touchscreen ■ Rotating cutting mechanism with four X-type blades for precise stripping ■ Highly sensitive trigger mechanism ■ No blade replacement required for all processable cables ■ No mechanical adjustments needed when changing cables ■ Continuous processing of multi-core cables stripping sheaths and internal conductors in a programmable sequence ■ Barcode scanner functionality

• Other processing machines

By installing rollers on the work transport surface, resistance is reduced, allowing for stable dimensional accuracy. - ZKC-325: Shear blade type - ZKC-325T: Thin blade type - ZKC-325C: Shear blade external control type - ZKC-325CT: Thin blade external control type 【Features】 ■ Capable of cutting a wide variety of workpieces ■ Easy setting with a memory function via touch panel ■ Feed length (cutting length) correction function ■ Roller gap and pressure adjustment function ■ Changeable between shear blade type and thin blade type ■ Compatible with various supply devices (Z feed, stand) ■ External input/output signals (for external control type only) ■ Communication with a computer is possible (custom order available) ■ Touch panel display can switch between Japanese and English ■ Transport resolution is 0.05mm (setting unit is 0.1mm), improving cutting accuracy ■ Shear blade type with no-adjustment rubbing mechanism ■ Setting rollers on the upper guide reduces workpiece transport jams ■ Maximum transport speed is 800mm/sec ■ Touch panel compatible with SD cards, supporting up to 640 memory slots *Please prepare the SD card yourself.

• Other processing machines

China BOZWANG manufactured length measurement and stripping machine BZW-50X 【Features】 ■ Supports length measurement and stripping processing of thick cables up to 50SQ (maximum outer diameter φ18mm) ■ Processing with rotary blades eliminates the need for stripping blade replacement ■ Digital management of cutting diameter and stripping length is possible through touch panel operation ■ The belt feed system prevents damage to wires and reduces variation in length measurement (Importer: Wylight Co., Ltd.)

• Other processing machines

China BOZWANG manufactured length measurement and stripping machine BZW-50H 【Features】 ■ Supports length measurement and stripping processing at both ends for thick cables up to 50SQ (maximum outer diameter φ14mm) (depending on the wire material) ■ Digital management of cutting diameter and stripping length is possible through touch panel operation ■ No need for complex program settings, allowing for intuitive operation ■ The belt feed system prevents damage to the wires and reduces variation in length measurement ■ Collaboration with Wylight for additional functions and software enhancements for the Japanese market (importer: Wylight Co., Ltd.)

• Other processing machines

This is a device that automatically measures and cuts round and flat cables. It transports cables at a maximum speed of 60m/min using a conveyor belt designed for high speed and precision, achieving high cutting accuracy with minimal variation. The program memory allows for the reuse of existing libraries (registered processing programs). 【Features】 ■ Extremely high measurement accuracy with minimal variation ■ Powerful cutting force through air-operated cutting ■ Very easy operation with an intuitive menu screen ■ LCD screen with multi-language display (Japanese/English/German) ■ Programmable registration (save and recall) ■ Versatile applications supported by an adjustable pressure conveyor belt ■ Diverse interfaces

• Other machine tools

The Cut&StripFamily "E400" offers high performance and excellent process safety. The functions are clearly arranged on the 10-inch touchscreen, significantly improving operability. The intuitively designed user interface of the S.Drive software helps in creating order programs and product programs, enhancing performance. 【Features】 ■ Processes conductor cross-sections from 0.14 to 16 mm² (26 to 6 AWG) ■ Intuitive new user interface for efficient operation ■ Software support for quick troubleshooting ■ Programmable grip axis for higher precision ■ Tool-free guide replacement ■ Belt drive system with built-in short piece kit ■ Feed unit with symmetrically closing grip axis

• Other processing machines

It widely supports commonly used wire sizes. Based on the proven 373, it accommodates wire materials from AWG#2 (30sq) to AWG#28 (0.08sq) with higher speed and greater power. It is a standard machine for wire processing. 【Features】 - Improved reliability by standardizing many maintenance parts with the conventional model (C373A). - Adopts a new generation of circuit boards and a new power supply system, further enhancing usability. - Equipped with a function to display in 13 languages (Japanese, English, Simplified Chinese, Traditional Chinese, Korean, Turkish, Polish, Indonesian, Thai, Vietnamese (2 types), Spanish (2 types)), with a system capable of accommodating further additions. - Includes a thick wire mode to reduce processing defects caused by leftover insulation. - Reduces noise from the cooling fan, enhancing quietness. - Input power is compatible worldwide (AC100V~240V). - Standard safety cover included. - Equipped with a wire diameter input assistance function. - In addition to cutting, stripping, semi-stripping, step stripping, and split stripping, various processing options such as slitting and intermediate stripping can be performed by equipping additional options.

• Other processing machines

With the twisting mechanism of the first (reverse) and second (forward) consecutive techniques, a seamless twisted wire can be created. Unlike manual or electric screwdriver work, there is no twisting back, so it won't unravel no matter where you cut it. Terminal-equipped harnesses can also be twisted using a crocodile clip. Even inexperienced users can work by adjusting the rotation speed. You can create the same item no matter how many you make.

• Other processing machines

With the twisting mechanism of the first (reverse) and second (forward) consecutive techniques, a seamless twisted wire can be created. Unlike manual or electric screwdriver work, there is no twisting back, so it won't unravel no matter where you cut it. Terminal-equipped harnesses can also be twisted using a crocodile clip. Even inexperienced users can work as they can adjust the rotation speed. You can create the same item no matter how many you make.

• Other processing machines

It can also be used with tabletop wire processing machines made by Schroniger and fully automatic crimping machines at Koter Electronics! It is capable of feeding out more than 2 meters per second. Since you only need to roll the bobbin and clamp it, you can easily attach heavy bobbins with wire without having to lift them manually. The dancer control utilizes the rotation speed of the bobbin, allowing for linear response. It can prevent phenomena such as winding in reverse due to excessive spinning of the bobbin, and it can also accommodate machines that measure length with sudden pulls, as it holds about 3 meters of wire at the upper pulley section.

• Other processing machines

While measuring, it performs multi-purpose winding such as aligned winding with the traversing function, and it stops when the set length is reached. Cutting is done by the cutting unit or the operator. Measurement can be done with a traverser that has a measuring function or by input from an external measuring machine. 【Features】 ■ Model selection can be made based on the size and winding weight of the winding parasol or winding drum. ■ Models with a measuring function in the traverser are all-in-one measuring cutting machines. ■ There are models that interact with existing measuring machines, such as stopping at the set length based on external input signals or encoder pulse inputs. ■ The winding rotation speed can be set arbitrarily, and the speed can be changed during winding by volume control. ■ Winding can be done in various ways, including "record winding," "aligned winding," "figure-eight winding," and "cross winding." ■ By attaching an optional cutter unit, cutting up to φ35 can be performed. ■ The size of the main unit can be changed according to the size of the winding drum or winding parasol. *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The crimp height can be easily adjusted without getting your hands dirty using a dial adjustment. The JAM type one-touch base is included as standard, making it easy to change the applicator. 【Features】 ■ Energy-saving, low noise, and low vibration The motor only runs when crimping, making it extremely quiet and reducing power consumption compared to traditional flywheel-type crimping machines when not in operation. ■ Lightweight It is approximately 25% lighter compared to conventional flywheel-type crimping machines. ■ Compatible with various applicators By using optional bases and adapters, it can accommodate applicators from various manufacturers, supporting both side and end types. ■ Easy height adjustment Height can be adjusted with a large dial, and an optional dial gauge with a minimum memory of 0.01mm can be installed for easier and more precise height adjustments. Manual handle operation is also available as standard. ■ Stable quality The adoption of a toggle mechanism and minimal motor heat generation and frame temperature rise ensure stable quality.

• Other processing machines

【Features】 ■ Equipped with an inverter-driven crimping machine EIC-25, which ensures energy saving, low noise, and easy height adjustment using a dial gauge. ■ Easy selection between "strip and crimp," "strip only," and "crimp only." ■ Servo control and color LCD panel make setting processing conditions simple, with the capability to register 100 channels. ■ Short wire feed length. ■ Adoption of crimp depth. ■ Simultaneous stripping and crimping, with improved work efficiency through the activation of the tip detection sensor. ■ Easy applicator exchange using a one-touch base.

• Other processing machines

The B300 is a particularly powerful and user-friendly stripping machine. Its repeatability, mechanical precision, and short working steps enable high productivity in general stripping applications. By focusing on ergonomic operation and programming through an easy-to-use 5-inch color touchscreen, it allows for simple and efficient operation. The B300 is a programmable universal stripping device that accommodates cables with a cross-sectional area of 0.03 to 8 mm² (32 to 8 AWG) and a maximum diameter of 7 mm. The high-sensitivity trigger sensor starts the stripping process as soon as it touches the end of the cable.

• Other processing machines

The "SA-384" is a length measuring cutting machine equipped with an encoder, enabling high-precision length measurement. 【Features】 ■ Equipped with an encoder for high-precision length measurement ■ Capable of measuring and cutting wires up to 3000m long, with a maximum width of 140mm and thickness of 30mm (384) ■ Capable of measuring and cutting wires up to 3000m long, with a maximum width of 45mm and thickness of 35mm (384S) ■ Accurately measures lengths even for uneven or soft and hard wires. ■ Since measurement is done with an encoder, there is no strip error and high measurement accuracy is achieved. ■ Length correction values can be set to compensate for measurement errors due to the material and shape of the wire. ■ High pulling tension allows for easy handling of thick wires. ■ The operation uses a touch panel, making it easy for anyone to operate and set. ■ The feed rollers automatically open and close, allowing for constant adjustment of the pressing pressure. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "SA-383S" is a length measurement cutting machine that incorporates a belt unit in the measuring section. It is suitable for transporting workpieces such as tubes due to the belt mechanism, and it can measure and cut electric wires with a maximum width of 40mm and thickness of 30mm up to a length of 3000m. Like the simple cutter, it is equipped with a variety of operating modes, allowing for cutting or processing different lengths of workpieces in any desired quantity, as well as the ability to memorize processing conditions. 【Features】 ■ Accurately measures lengths even for uneven electric wires or wires made of soft and hard materials. ■ The belt feeding mechanism makes it ideal for hollow items like tubes. ■ Length correction values can be set to compensate for measurement errors due to the material and shape of the electric wire. ■ It can easily handle thick electric wires due to its high pulling tension. ■ The operation uses a touch panel, making it easy for anyone to operate and set up. ■ Length measurements can be made up to a maximum of 3000M. ■ The feeding rollers automatically open and close, allowing for constant adjustment of pressing pressure. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The MS7000 is a compact electric cable reel that allows for smooth attachment and detachment with an electric opening and closing mechanism for the retractable umbrella. It features variable winding speed, enabling winding tailored to the type of wire. The inner diameter of the reel can be adjusted freely from 200mm to 280mm with a width of 90mm, and by attaching optional small-diameter fittings, winding with a minimum diameter of 100mm is also possible. Equipped with a foot switch for ON/OFF and rotation speed control, the cable clamp is designed for easy insertion, enhancing work efficiency through simple operation. 【Features】 - Variable winding speed - Adjustable inner diameter for winding - Easy operation - Switchable left/right rotation to accommodate either hand - Electric opening and closing with options for full or half closure diameter - Capable of winding hoses and wire ropes due to its torque *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "MM450N" is a device that evenly winds bundles of wires onto a bobbin from the outside without tangling them. The bobbin rotation speed can be continuously adjusted, and it accommodates bundle outer diameters of up to 380mm. Since it uses an electric traverser, it can be adjusted to ensure even winding when wrapping around the bobbin. 【Features】 ■ Continuous variable speed for bobbin rotation ■ Accommodates bundle outer diameters of up to 380mm ■ Powerful at low speeds with a DC motor ■ Even winding with an electric traverser *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

For the lathe, it is equipped with a tool memory of 200 points, and for the milling machine, it also has a coordinate point memory of 200 points. Therefore, by memorizing the arbitrary position of the vice and the rotation axis center, the positioning time can be significantly reduced. Even if there is a sudden power outage and the power goes out, the memory will not be erased. The PCD function is also standard, allowing for circle calculations without a circular tool. 【Features】 ■ Friction type for easy installation ■ Power supply: AC100V to 220V ■ 200-point memory, various functions including PCD division ■ Astonishing price ■ Almost immediate delivery system ■ Contributes to significant reduction in processing time *For more details, please refer to the PDF document or feel free to contact us.

• Distance measuring device
• Other electronic measuring instruments
• Other inspection equipment and devices