Unchained Labs (アンチェインドラブズ） List of Products and Services

In the development of biopharmaceuticals and gene therapies, a lot is required for the evaluation of their characteristics, but particularly the assessment of stability is very important. Stunner is a device equipped with both UV/Vis and DLS that enables quality evaluation of proteins, AAV, adenoviruses, and LNPs in a low-volume and high-throughput manner. Moreover, it not only allows for measurements in a short time but also boasts high precision as one of its strengths. **Features of Stunner** - Measures 2μL, up to 96 samples in a single batch in 60 minutes **Applications** - AAV and adenovirus capsid titer - AAV and adenovirus empty/full ratio - Lipid nanoparticle (LNP) payload amount - Aggregation measurement - Concentration measurement - Sizing & polydispersity - B22 & kD *Download related materials now to check the details!*

"Stunner" is a product that allows simultaneous acquisition of UV/Vis concentration, dynamic light scattering (DLS), and static light scattering (SLS) data from a 2μL identical sample. It enables detailed investigation of AAV and adenoviruses to measure total capsid titer and Empty/Full ratios, as well as to obtain payload concentration and size data of lipid nanoparticles all at once. You can analyze concentration, hydrodynamic size, polydispersity, and the presence of aggregates collectively, allowing you to assess the quality of proteins. This way, you can immediately determine whether your AAV, adenoviruses, lipid nanoparticles, or proteins are suitable for your purposes. [Features] ■ Measure up to 96 samples in a batch in 60 minutes*/12 minutes** *When measured by DLS **When measured by UV/Vis only [Applications] ■ AAV/Adenovirus capsid titer ■ AAV/Adenovirus Empty/Full ratio ■ Lipid nanoparticle (LNP) payload amount ■ Aggregate measurement ■ Concentration measurement ■ Sizing & polydispersity ■ B22 & kD *For more details, please refer to the PDF document or feel free to contact us.

"Uncle" is a product that allows for the acquisition of more data with a small amount of protein. The required sample volume is only 9μL. By combining three different measurement modes—fluorescence, SLS, and DLS—it is easy to evaluate the optimal formulation and the stability of proteins or viral vectors. 【Features】 ■ Measure up to 48 samples in as little as about 2 hours with just 9μL. 【Applications】 ■ Tm & Tagg ■ Tm via SYPRO DSF ■ Isothermal stability ■ Sizing and polydispersity ■ Sizing via thermal gradient ■ Refolding measurements ■ Viscosity ■ kD ■ B22 ■ G22 ■ ΔG ■ Stability of viral capsids *For more details, please refer to the PDF document or feel free to contact us.

"Honeybun" is a high-speed viscometer that can output data almost simultaneously with processing. Regardless of whether the number of samples is 1 or 10, it uses a few microliters of each sample through a microchannel and reads viscosities in the range of 0.5-150 cP within a few minutes. No pre-treatment or cleanup of samples is necessary. 【Features】 ■ Can measure up to 10 samples at once ■ Required sample volume: 35μL (can measure from 15μL; see application notes) ■ Measurement completed in under 1 minute (for viscosities below 10 cP) ■ Measurement range: 0.5-150 cP ■ No cleaning required and maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

Buffer exchange and concentration must be performed as a sample preprocessing step. This is a labor-intensive task that takes a long time, requiring your presence throughout the process. "UNAGI" is a fully hands-free benchtop buffer exchange solution designed to take over this tedious task. It can process up to 8 samples simultaneously. The software is very easy to operate, allowing you to be anywhere during the work, eliminating the need to stay in the laboratory the entire time. 【Features】 ■ Simultaneous processing of up to 8 samples ■ Efficient solvent removal prevents sample adsorption, achieving over 96% recovery rate ■ Built-in recipes for UF/DF buffer exchange ■ User-friendly software ■ Concentrates up to 8 diluted samples from 48mL to 8mL in one go *For more details, please refer to the PDF document or feel free to contact us.

Buffer exchange and concentration must be performed as a pre-treatment of the sample, which is a time-consuming task. This process takes a long time, and you have to be present the entire time. "UNAGI" is a fully hands-free benchtop buffer exchange solution designed to perform this tedious task for you. You can be anywhere during the process, eliminating the need to stay in the laboratory the whole time. 【Features】 ■ Simultaneous processing of up to 8 samples ■ Efficient solvent removal to prevent sample adsorption, achieving over 96% recovery rate ■ Built-in recipes for UF/DF buffer exchange ■ User-friendly software ■ Concentration of up to 8 diluted samples from 48mL to 8mL in one go *For more details, please refer to the PDF document or feel free to contact us.

"Lunatic" is a product that allows for easy simultaneous quantification of proteins, DNA, and RNA. The required sample volume is only 2μL, and up to 96 samples can be measured in 5 minutes. High-concentration samples can also be measured directly without dilution. 【Features】 ■ Measure 2μL, up to 96 samples in 5 minutes ■ Dynamic range coverage from 0.02 to 200 mg/mL* *for mAb ■ Outstanding accuracy and precision ■ Automation is also possible *For more details, please refer to the PDF document or feel free to contact us.

"Nunchuck" is a platform that combines two essential steps needed to create perfectly sized lipid nanoparticles (LNPs): total flow rate (TFR) screening and LNP formulation. In just 10 minutes, you can quickly find suitable conditions through 8-stage total flow rate screening, and then immediately proceed to produce LNPs ranging from 0.25 mL to 1 L. The software is very easy to use, allowing you to start production right away. Additionally, the physical property evaluation of the produced LNPs can be done conveniently and quickly with our Stunner. *For more details, please refer to the LNP application note available via the "PDF Download" button below. Stop the repetitive workflow that measures only one flow rate at a time, and try our LNP production method that completes everything in one go. 【Features】 - Production of LNPs sized 50 to 200 nm - 8-stage TFR screening in 10 minutes - Proven results from 0.25 mL to 1 L - Executed with a dedicated cartridge - Easy to use *For more details, please refer to the PDF materials or feel free to contact us.

"Leprechaun" is a system that analyzes whether lentivirus particles are of the correct size and structure, and can measure viral titer. It allows for the determination of the titer of lentivirus present in a sample without being misled by confusing noise (such as incomplete viruses or contamination). Not only can it measure information that was previously only obtainable separately through conventional methods like ELISA, qPCR, and transduction assays, but it also enables structural analysis that those methods could not provide, all on a single platform. Capabilities: ■ Lentivirus titer ■ Lentivirus structure ■ Exosome concentration ■ Analysis of contamination (impurities such as extracellular vesicles) Features: ■ No sample purification required ■ Physical structural analysis possible ■ Distinction between virus integrity and impurities ■ Up to 16 samples can be measured at once *For more details, please refer to the PDF document or feel free to contact us.

The evaluation of viral stability necessary for the development of gene therapy using adeno-associated virus (AAV) vectors is very complex and requires an understanding of the properties of all viral particles, viral genomes, and capsid proteins. Analyzing the effects on stability necessitates the assessment of serotype, formulation, manufacturing process, and storage conditions, while these analyses have been time-consuming and labor-intensive. Uncle combines three measurement modes: fluorescence, SLS, and DLS, allowing for insights necessary for the analysis of capsids, proteins, and nucleic acids all in one device. By using Uncle, a sample volume of just 9μL can analyze up to 48 samples in under 2 hours, enabling a quicker evaluation of more drug candidates and formulations. 【Features】 ■ Batch measurement of 9μL, up to 48 samples in approximately 2 hours at the shortest 【Applications】 ■ Tm & Tagg ■ Tm by SYPRO DSF ■ Isothermal stability ■ Sizing and polydispersity ■ Sizing by thermal gradient ■ Refolding measurement ■ Viscosity ■ kD ■ B22 ■ G22 ■ ΔG ■ Stability of viral capsids

Once we succeed in finding the optimal formulation conditions for sunscreen, let's use Sunshine to adjust the size of the LNP. Furthermore, we will optimize the protocols and processes for scaling up. We will find the ideal flow rate and explore different mixing options. Next, we will adjust these to the appropriate dilution factor that can keep them stable. Once everything is in place, Sunshine will transition to continuous mode, allowing us to produce several dozen liters in a day. In other words, we will achieve process development and scaling up on a single platform. Many researchers have likely been looking forward to the birth of such a groundbreaking system. • 10 experiments in 15 minutes • Fraction & total flow • From 1 mL to continuous flow • Flow rate 0.1 to 30 mL/min • Reusable microfluidic chips • Possible transition of protocols from sunscreen

To create the optimal LNP, it takes a tremendous amount of time and effort to examine and pursue formulation conditions. LNPs are nanoparticles composed of multiple lipids. Therefore, it is necessary to find the optimal conditions such as the mixing ratios, the ratio of lipids to payload, and the flow rates during mixing. Furthermore, we must also consider throughput issues. Sunscreen can produce up to 96 types of small LNPs within six hours, thus solving the previous throughput problems. This means that it is possible to explore a greater number of formulation condition investigations in a single day. • Fully automated execution of up to 96 types of condition investigations within six hours • 200 μL to 2 mL per experiment • Flow rate of 0.1 to 30 mL/min • Reusable microfluidic chips • Seamless scale-up through process and protocol optimization

The transition from LNP to GMP is a costly and complicated process. Typically, this requires switching equipment, using different flow paths and mixing devices, and essentially re-developing and re-validating everything that has been painstakingly done so far. With Sunbather, the transition to GMP can be done easily thanks to its recording features, interchangeable flow paths, and easily transferable design. Sunbather uses the same mixing process and protocols as the Sunscreen and Sunshine from the same Sun series, allowing for easy transition of adjusted formulation conditions to GMP. - Up to 1.8 L/h - Integrated inline dilution - Fully interchangeable flow paths - A wide variety of mixing devices - Software compliant with 21 CFR Part 11 - Process transferable from Sunshine

The development of lipid nanoparticles (LNPs) faces many challenges. The formulation, optimization, and scale-up for clinical trials are complex, costly, and a race against time. Our LNP solutions are designed to accelerate all steps of LNP synthesis and characterization. Sunscreen accelerates LNP formulation screening by reducing costs and time, generating up to 96 unique LNP formulations within 6 hours. Next, using Sunshine, you can develop, optimize, and scale up protocols with the appropriate formulations obtained from Sunscreen. When it comes to the clinical trial phase, Sunbather can accommodate LNP production in a GMP environment using the same processes and microfluidic chips (Sunny) utilized by Sunscreen and Sunshine. In this way, the Sun series allows for a seamless transition from screening formulation conditions to scale-up and GMP manufacturing, as they all use the same pumps and microchannel chips. *For product details, please download various materials.

Aunty is a protein stability analysis tool that boasts high speed and high throughput. Utilizing techniques such as fluorescence, static light scattering, and dynamic light scattering, Aunty rapidly conducts thermal denaturation and aggregation experiments. During thermal ramp experiments involving temperature changes, it can read samples across an entire 96-well plate. You can screen candidates, conditions, or formulations in large quantities and repeat experiments as many times as needed. Aunty outputs results with unprecedented data resolution, supporting you in finding the optimal samples at overwhelming speed. 【Features】 ■ Measures 8μL, up to 96 samples simultaneously in SBS format plates ■ Simultaneously measures fluorescence, static light scattering, and dynamic light scattering ■ Automation is also possible 【Application Examples】 ■ Melting temperature (Tm, Tonset) ■ Aggregation (Tagg, Tsize) ■ Colloidal stability (kD, B22, G22) ■ Long-term stability ■ Virus vector stability *For more details, please refer to the PDF materials or feel free to contact us.