九州ケツト Product Lineup

● Contains the antibacterial agent isopropyl methylphenol By containing the antibacterial agent isopropyl methylphenol, it allows for disinfection and sterilization (※) while washing hands. ● Virus prevention through handwashing The combination of ingredients disinfects (※) even viruses that are resistant to other agents. ● Gentle lather The smooth and easily spreadable foam envelops the hands, effectively removing dirt and viruses. ● Easy to use and non-iodine based Contains glycerin (moisturizer) to keep hands healthy. It is fragrance-free, making it recommended for hygiene measures in food facilities. ※ It is not effective against all bacteria and viruses.

• detergent

● Effectively lifts and removes dirt Thanks to a unique formulation, it achieves high cleaning power that is strong against oil stains. It demonstrates stable cleaning performance even during large-scale daily cleaning. ● Quick rinsing The foam rinses off easily after cleaning, allowing for speedy rinsing. This contributes to reduced working time and water savings. ● Gentle on hands While maintaining high cleaning power, the formulation is also designed to be gentle on hands during use.

• detergent

By adding magnesium sulfate to ethanol and organic acids, it removes various viruses and bacteria. <Uses> ● For wiping surfaces that people touch Tables, chairs, handrails, refrigerator handles, doorknobs ● For disinfecting cooking utensils Knives, cutting boards, faucet handles ● For disinfecting various areas in the toilet Toilet lever

• Disinfectant

● Strong against stubborn oil stains! Contains alkaline agents, surfactants, and penetrating agents. It deeply penetrates and breaks down dirt, making it easy to remove. ● Economical and can be diluted Can be used on cooking equipment such as gas ranges, hoods, fryers, as well as floors, walls, ventilation fans, and work tables, from light stains to burnt-on grime. ● Reduces work burden Even stubborn oil stains can be easily removed by applying this product and letting it sit for a short while. No need to scrub hard.

• detergent

It takes a considerable amount of time for construction lumber to dry all the way through, but if we judge it based only on the surface dryness, various problems such as warping and discrepancies in finishing dimensions can occur. In such cases, the HM-540, which can measure the moisture content inside the wood, becomes necessary. Furthermore, when dealing with high-quality dried wood for furniture or musical instruments, where we want to avoid surface damage, or when we want to measure low-moisture wood, the measurement method of this device is extremely effective. The HM-540 has added features such as moisture value correction, data storage output, statistical functions, and auto-hold functionality, in addition to the functions of the conventional HM-520, which is widely used in the industry. It also has a larger screen size, a backlight, and the housing and switches have been ergonomically redesigned, making it an even more user-friendly device. ● Compact and lightweight handheld type ● Moisture correction function ● Measurement result hold function ● LCD screen with backlight ● Data storage and statistical calculation functions

• Other measurement, recording and measuring instruments

Conventional near-infrared moisture meters faced challenges such as complicated distance adjustments between the sample and the light source, as well as variations in measurement values due to differences in particle size. This device was developed with the fundamental concept of solving those issues and has arrived at a solution. "Illuminate the bottom surface of the sample uniformly." This was the solution. With this alone, the distance between the sample and the light source is always kept constant, eliminating the influence of particle size variations. Additionally, this device allows for the selection of various sample cells (containers). In addition to the included glass dish, disposable plastic bags and sheets can also be used, reducing the hassle before and after measurements. It is an ideal device for environments that require numerous sample measurements and immediate responsiveness. "Time and effort are precious, but accurate moisture values are desired." This is for everyone who feels that way. ● Immediate response ● Two types of measurement modes ● Selectable sample cells and measurement methods ● Calibration curve creation function ● Suitable for various measurement targets

• Other measurement, recording and measuring instruments

The ease of use of conventional devices, which are widely used in the construction field, remains unchanged, and Bluetooth has been newly added. The free app "COMO Lab" allows for data transfer and management to tablets, smartphones, etc., and can flexibly respond to the recent push for digital transformation (DX) on-site. In terms of functionality, in addition to the D mode used for comparative measurements, it is equipped with an S mode that selectively measures only the surface layer, and it also features a D/S mode that can display both simultaneously for numerical comparison. By combining this with a user scale that allows for custom measurement targets, it can be operated for a wide range of applications. In addition to saving and viewing measurement data and statistical calculation functions, it is equipped with a concrete scale based on the latest methods, designed to meet the needs of various stakeholders, including on-site workers and managers. ● Selectable measurement modes (D/S mode) ● User scale function for customizing new measurement targets ● Smartphone app "COMO Lab" (Android version) ● Data saving and viewing functions ● Auto-hold function ● Equipped with a new concrete scale

• Other measurement, recording and measuring instruments

The conventional device measured the environmental temperature in the drying chamber using a thermistor and controlled the heating and drying temperature. The temperature measurement using the thermistor is a stable and established method based on long-term results. However, when higher precision moisture measurement is required, it is structurally difficult to maintain a consistent distance between the heater or thermistor and the sample due to issues with the sample temperature's responsiveness to the environmental temperature and the shape of the sample. This variability negatively impacted measurement accuracy. Therefore, this device is equipped with a non-contact radiation thermometer that directly measures the sample temperature in addition to the thermistor, complementing the thermistor's shortcomings and allowing for the setting of optimal heating and drying conditions tailored to the sample characteristics, without burning or altering the sample, thus achieving reduced measurement time and improved measurement accuracy. This device is positioned as a moisture meter for quality control departments and inspection departments that require advanced moisture management, supporting high-precision moisture control. ● Six measurement modes to meet various measurement requirements ● Displays moisture change over 30 seconds ● Equipped with an auto-tare mechanism ● Features a medium-wavelength infrared quartz heater ● External output to PC and printer ● Calibration of mass sensors is possible

• Other measurement, recording and measuring instruments

To achieve a high-performance and high-precision moisture meter while being a standard model, the mass sensor is equipped with a balance unit "Uniblock*" with a resolution of 1 mg, and the heat source features two mid-wavelength infrared quartz heaters with a large heat capacity of 200W each. Additionally, to mitigate the effects of balance drift, an auto-tare mechanism has been adopted, similar to previous series models. To allow for the optimal drying conditions for a wide range of measurement targets, there are six selectable measurement modes depending on the situation, including a "Rapid Drying Mode" that avoids temperature drops in the chamber due to vaporization heat and shortens drying time, and a "Slow Drying Mode" that is effective for samples prone to thermal degradation. This device can be used in various settings, primarily in quality control and inspection departments that require advanced moisture management. *"Uniblock" is a product name of Shimadzu Corporation. ● Six measurement modes to meet various measurement requirements ● Displays moisture change over 30 seconds ● Equipped with an auto-tare mechanism ● Features mid-wavelength infrared quartz heaters ● Saves 10 measurement conditions ● External output to PC and printer ● Calibration of mass sensor is possible ● Compatible with IQ/OQ requirements

• Moisture Measuring Device
• Other measurement, recording and measuring instruments

While maintaining a compact appearance compared to conventional instruments, it inherits the auto-tear mechanism that reduces the influence of balance drift and has significantly revamped the control section. By equipping it with an LCD and keys with good visibility, it has become a user-friendly device that indicates the state of the instrument and the operations that users can perform. Additionally, the organic carbon heater, which is adopted for the first time as a heat source, emits a large amount of infrared radiation in the wavelength range that reacts with water, resulting in efficient sample drying and a longer lifespan compared to infrared lamps and halogen heaters. Furthermore, it does not contain halogen compounds or metals, making it an environmentally friendly heat source. As a new feature, it includes a Pre Heat mode, which stabilizes the internal temperature of the instrument before measurement, ensuring mechanical and electrical stability. Other improvements, such as enlarging the sample tray to enhance drying efficiency, have been made, incorporating the extensive research results of infrared moisture meters. This instrument serves as a new versatile device for infrared moisture measurement, suitable for various applications, including quality control and inspection departments that require moisture management.

• Moisture Measuring Device
• Other measurement, recording and measuring instruments

The "L-600 Standard/Expert Thickness Gauge" offers a standard model (L-600 Standard) of probe-type thickness gauge and a higher model (L-600 Expert) equipped with Bluetooth, enhancing data storage and output capabilities. By simply changing the probe, it can accommodate both electromagnetic and eddy current methods. It also comes standard with block/group statistical calculation functions, making data aggregation and statistics easy. *If you wish to purchase or have any questions, please contact us via the link below.*

• Coating thickness gauge

The "RN-700" is a grain classification machine equipped with a newly developed image recognition engine. It captures images of rice on a tray while changing the light source and processes multiple images taken. It analyzes the quality of each individual grain of rice. Operation is simple; just spread the rice on the tray and set it, and it will automatically output the results. 【Features】 - Captures three images using transmitted light, reflected light, and spot transmitted light - Organic EL display that is clear and easy to see even outdoors - Capable of saving to an SD card and connecting to a PC - Displays the number and ratio of grains by type on the main unit - Measures not only the quality of each grain but also dimensions (length, width, area) *For more details, please refer to the PDF document or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices

Near-infrared light has almost no heat and does not change the physical properties of the target object, allowing for real-time and continuous monitoring of component value fluctuations by incorporating the equipment into the production line. We offer a lineup including the near-infrared component analyzer "KJT-700," which can be selected from 5 or 7 wavelengths depending on the measurement target, and the near-infrared moisture meter "KB-30," which is specialized for moisture measurement. These instruments can be used for a wide range of applications, including food, pharmaceuticals, paper, ores, and building materials. 【Features】 ■ Non-destructive and non-contact ■ Real-time component analysis ■ Filter spectroscopic method ■ Easy operation *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Other measurement, recording and measuring instruments