多田プラスチック工業 List of Products and Services

At Tada Plastic Industry, we have a proven track record in precision molding using super engineering plastics such as "PPS." As design and mold technology for metal replacement with resin, we implement 3D CAD design, CAE analysis, and mold manufacturing. Lot sizes range from 1,000 to 100,000 units, with precision from 0.1mm to 1/100m. 【Design and Mold Technology for Metal Replacement with Resin】 ■ 3D CAD Design ■ CAE Analysis (Optimal Wall Thickness, Deformation and Shrinkage Analysis) ■ Mold Manufacturing (Mold Temperature Management, Gas Burn Prevention) ■ 3D CNC Image Measurement Machine (Dimensional Accuracy Analysis Confirmation) *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

"PA66GF" solves the problems of conventional injection molding through gas injection (AGI molding method) and achieves a high level of dimensional accuracy that was previously difficult to attain. It enables hollow molding that considers increased product rigidity, warpage improvement, shrinkage reduction, and lightweight design. Instead of maintaining high pressure during the resin filling process in general injection molding, nitrogen gas is injected to maintain pressure (low pressure) from inside the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and burrs that were issues in traditional molding. [Features] - High rigidity and high strength - Good appearance quality (high gloss) - High durability - Reduction of component parts - Lightweight design - Cost reduction - Improved recyclability *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract

This is an introduction to a gear unit (proposed development product) that has been converted to resin (mass production). In engineering plastic molding, it contains a high amount of reinforced glass fibers, and due to the significant gas generation, the screws of the molding machine are prone to wear. Therefore, our company has implemented a special specification for ultra-corrosion resistance and wear resistance to ensure stable quality. The resin conversion of metal parts offers environmental benefits such as water resistance, insulation, chemical resistance, and the substitution of finite metal resources. It contributes to the lightweighting of automobiles, which in turn extends driving range and reduces CO2 emissions. [Benefits of Metal Substitution] ■ Weight reduction ■ Cost reduction ■ Increased design flexibility ■ CO2 reduction *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract

We would like to introduce the benefits of using metal alternatives for electric bicycle gear cases. Our company manufactures molds using precise design and machining techniques. By customizing molding machines and managing the molding environment (temperature and humidity), we ensure stable quality. The use of resin instead of metal parts offers advantages such as water resistance, insulation, chemical resistance, and consideration for the environment by providing an alternative to finite metal resources. Please feel free to contact us when you need assistance. 【Benefits of Metal Alternatives】 ■ Weight reduction ■ Cost reduction ■ Increased design flexibility ■ CO2 reduction *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

Our company has a wide range of business partners in various fields including automotive, medical care, industrial equipment, housing, home appliances, logistics, and packaging. We can respond through the fusion of technologies in injection molding, urethane molding, small DC pumps, precision rubber molding, development and design technology, mold technology, and assembly technology. In the development technology of small DC pumps (micro pumps), we have a wide lineup of small DC tube pumps, and we can accommodate related components in molding, assembly, etc. Please feel free to contact us when you need assistance. 【Fusion of Technologies】 ■ Injection Molding Technology ■ Development Technology for Small DC Pumps (Micro Pumps) ■ Rigid/Soft Polyurethane Foam Molding Technology ■ Precision Rubber Molding Technology ■ Development and Design Technology ■ Mold Technology ■ Assembly Technology *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract

We would like to propose our in-house developed products from Tada Plastic Industry. Starting with the "Refrigerated Transport Container for Pharmaceuticals (integrated inner box)" suitable for the concern of wanting to transport expensive pharmaceuticals, we also offer "Foaming Wash," which is ideal for those looking for an automatic foaming machine. In addition, we have prepared products such as the "Camera Cleaning Unit" and "Automotive Automatic Transmission." Please feel free to contact us if you have any inquiries. 【In-house Developed Products】 ■ Refrigerated Transport Container for Pharmaceuticals (integrated inner box) ■ Thin High Insulation Material for Water Heaters ■ Camera Cleaning Unit ■ Metal Alternative Products ■ Foaming Wash ■ Automotive Automatic Transmission *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract

Our company provides one-stop solutions for customer challenges from development to mass production, based on seven core technologies: micro pump development and manufacturing, precision molding, polyurethane foam molding, precision rubber molding design, mold making, and assembly. From the development stage, we aim to shorten development lead times through prototype proposals that consider mass production, ensure quality based on APQP, PPAP, and control plans, and achieve stable product supply to solve customer challenges. 【Specifications】 ■Materials ・Resin ・Urethane ・Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract
• Embedded system design service

Tada Plastic Industry has a diverse range of clients in fields such as automotive, medical care, industrial equipment, housing, home appliances, logistics, and packaging. As a result, we respond with a fusion of technologies in injection molding (precision molding and metal substitution), soft/hard urethane molding, small DC pumps, and precision rubber molding. In our hard/soft polyurethane foaming molding technology, integrated composite molding is possible during hard urethane molding. 【Fusion of Technologies】 ■ Injection Molding Technology ■ Small DC Pump (Micro Pump) Development Technology ■ Hard/Soft Polyurethane Foaming Molding Technology ■ Precision Rubber Molding Technology *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract

Here is an introduction to the basic knowledge of rigid urethane. "Rigid PUF" consists of independent bubbles and is not a foam made by expanding beads like EPS, which makes it highly resistant to moisture permeability. Generally, it is less than 1/2 to 1/3. It can be utilized in various industries, including the automotive (mass production) industry, construction parts industry, and medical device industry. 【Specifications】 ■ Materials - Resin - Urethane - Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

We will introduce the foaming ratio of rigid polyurethane. Unlike the EPS industry, the PU industry does not use the expression of how many times it is foamed. Instead, it is expressed using the indicator of foaming density (kg/m3). The foaming ratio is adjustable. The higher the density, the lower the thermal insulation performance. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Material: Resin, Urethane, Thermosetting Resin ■ Lot: 100 to 1,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

I will introduce the differences between polyether-based and polyester-based materials. The molecular structures of polyester-based urethane and polyether-based urethane are different. Polyether-based urethane contains -O- within its bonding molecules, and in principle, this molecular structure is not affected by H2O (water). In other words, it is a material that is strong against water. An example of this is its use in bathtub covers. On the other hand, polyester-based urethane contains -COO- within its bonding molecules, and this molecular structure tends to react with H2O (water) and decompose into -COOH (acid) and -OH (alcohol). Therefore, polyester-based urethane is generally said to have inferior water resistance. *There are also polyester-based materials with high water resistance. *For more details, please refer to the PDF materials or feel free to contact us.

• plastic
• Other polymer materials

Here is an introduction to the basic knowledge of rigid polyurethane. "Closed-cell" foam does not have interconnected bubbles, making it difficult for gases or liquids to pass through, and the air inside the bubbles is also hard to escape. As a result, closed-cell polyurethane foam is used in packing materials, tire tubes, bath lids, swimming aids, and more. 【Features】 ■ Difficult for gases and liquids to pass through ■ Floats on water ■ Provides insulation and heat retention *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

We would like to introduce our group company, Minami Design Co., Ltd. At our headquarters, we carry out design model production, working model production, vacuum casting, simple mold creation, and injection molding. Additionally, at our Vietnam branch, we handle processing program creation and resin processing. Please feel free to contact us when you need our services. 【Headquarters Business Activities】 ■ Design model production ■ Working model production ■ Vacuum casting ■ Simple mold creation ■ Injection molding *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Processing Contract
• Plastic Mould

Here is an introduction to the basic knowledge of rigid polyurethane. "Rigid Polyurethane (Cyclopentane)" does not contain substances subject to VOC regulations, thus it is not subject to regulation. Formaldehyde, toluene, and other organic compounds that easily volatilize at room temperature are shown in a diagram along with examples of their main uses as specified by the Ministry of Health, Labour and Welfare's VOC regulations. Please feel free to contact us if you have any inquiries. 【Specifications】 ■Materials - Resin - Polyurethane - Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

We would like to introduce "engineering plastics" for precision molding. The dimensional tolerance is 0.005mm (up to 0.1 microns), with a precision of less than 1/1000mm. The lot size ranges from 1,000 to 100,000 pieces. These materials can be utilized in various industries, including the battery industry, automotive (mass production), and medical device industry. 【Overview】 ■ PBT ■ SPS ■ PA6・PA66 ■ POM (Polyacetal) ■ PC (Polycarbonate) ■ PPE m-PPE resin (Modified Polyphenylene Ether) ■ PMMA ■ PET *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"PBT (containing GF)" is a resin with excellent balance in electrical properties, heat resistance, heat aging resistance, and friction and wear characteristics. The material is resin, engineering plastic, and the lot size ranges from 1,000 to 100,000 pieces. It can be used for automotive electrical and electronic components, as well as as a substitute for moisture-absorbing PA66, and in housings, motor gears, etc. 【Specifications】 ■ Material: Resin, engineering plastic ■ Lot size: 1,000 to 100,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"PA66 and PA6" are components containing 55% glass nylon. They also support PA6GF65% and PA66GF65%. They excel in heat resistance, rigidity, impact resistance, and wear resistance, and there are proven types containing carbon fiber. The process includes a step to remove distortion using a stress-relief annealing machine, making them suitable for use in various fields such as automotive, electrical and electronic, and industrial equipment. 【Features】 ■ Excellent heat resistance, rigidity, impact resistance, and wear resistance ■ Micron-level (dimensional tolerance ±0.005mm) ■ Small precision factory (injection molding machines) converted into a clean booth, injection molding machines ranging from 50t to 230t ■ Supports PA6GF65% and PA66GF65% ■ Proven types containing carbon fiber *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

Here is an introduction to the basic knowledge of "Nylon (PA Polyamide)." There are several materials with different resins, and in Japan, common types include Nylon 6 and the heat-resistant Nylon 66, which are collectively referred to as nylon. It is used in automotive airbags, and there are types that contain glass fibers. Additionally, it excels in heat resistance, mechanical properties, and chemical resistance. 【Specifications】 ■ Material: Resin, engineering plastics, glass fiber reinforced resin ■ Lot: 1,000 to 100,000 pieces ■ Precision: 1/100 to 1/1000 mm *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"ABS" offers resistance to long-term degradation through weather-resistant resin proposals. Secondary processing such as plating, silk printing, and painting is also possible. For decorative aspects, we will collaborate with partner companies. Additionally, we also support weather-resistant modified grades such as ASA or AES. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, general-purpose plastic ■ Lot: 1,000 to 10,000 pieces ■ Accuracy: Within general tolerance range *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

Introducing "PMMA," suitable for automotive parts. It has excellent weather resistance and transparency, and is resistant to scratches. Due to its properties, it is used for items such as meter covers. It can be utilized in prototype and mass production in the automotive industry. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, general-purpose plastic ■ Lot: 1,000 to 10,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"ABS" is easy to mold and has excellent dimensional stability and plating properties. It is used in high-end models to enhance the luxury feel of automotive interior parts. Although there has been a shift from ABS to PP, a return from PP to ABS is occurring, particularly in high-end models. It can be utilized in the automotive (mass production) industry, as well as in the weak electrical, home appliance, and office equipment industries. 【Specifications】 ■ Material: Resin, general-purpose plastic ■ Lot: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

The 'Fender (Plastic Outer Panel) PE' is produced using large-scale injection molding. It has rust resistance and collision safety, making it suitable for plastic tanks and similar applications. It contributes to weight reduction and cost reduction as a metal alternative, and in some areas, it can also reduce the number of parts (increasing design flexibility). [Features] ■ Contributes to weight reduction and cost reduction as a metal alternative ■ In some areas, it can also reduce the number of parts ■ Rust resistance ■ Collision safety *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"PPSGF40-60" is suitable for electrical components such as capacitor cases, lamp reflectors, and motor brush holders. HV capacitor cases require reinforcement of molded parts at the fastening points with collars and nuts. Additionally, to meet the positional accuracy (0.3) of multiple collar locations, automatic insert equipment has been designed and manufactured, ensuring dimensional accuracy through cycle stabilization. To manage the required dimensional accuracy, we utilize 3D measuring instruments to conduct inspections based on the inspection specifications agreed upon with the customer. We also design and manufacture dedicated inspection equipment to ensure quality control. 【Specifications】 ■ Material: Resin, engineering plastics ■ Lot: 10,000 to 100,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"PPS (GF40-60%)" has achieved a 50% reduction in weight to improve fuel efficiency. To ensure product strength, we have replaced aluminum die casting through material development with material manufacturers (based on PA66). Since strength varies depending on product shape, we will conduct approval processes with customers. We satisfy the requirements for warping and flatness, and perform flow analysis to estimate weld positions, shrinkage, and voids, and can also conduct strength analysis. 【Benefits of Metal Replacement (Resinization)】 ■ Weight reduction ■ Cost reduction ■ Increased design flexibility ■ CO2 reduction *For more details, please refer to the PDF materials or feel free to contact us.

• plastic
• Other polymer materials

"PA66GF65" is highly rigid and strong, making it suitable as a metal alternative. By using gas injection (AGI molding method), it solves the issues of conventional injection molding and achieves a high level of dimensional accuracy that was previously difficult. It enables hollow molding that considers product rigidity improvement, warpage reduction, shrinkage improvement, and weight reduction. Instead of maintaining high pressure during resin filling in general injection molding, nitrogen gas is injected to maintain pressure (low pressure) from inside the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and burrs that were drawbacks of traditional molding. 【Features】 ■ High rigidity and strength ■ Good appearance quality (high gloss) ■ High durability ■ Reduction of component parts ■ Weight reduction ■ Cost reduction ■ Improved recyclability *For more details, please refer to the PDF materials or feel free to contact us.

• plastic
• Other polymer materials

We would like to introduce "the resinization of the housing." Lightweighting aluminum die-cast products through resinization. We are achieving the replacement from aluminum die-casting through material development with material manufacturers to ensure product strength. Our company customizes molding machines and manages the molding environment (temperature and humidity) to ensure stable quality. Additionally, we shape even complex product designs using our cultivated molding technology, mold technology, and post-processing technology (such as vibration welding). 【Features】 ■ Insert molding with four types of color nuts at twelve locations ■ Dimensional stabilization through automatic insertion with multi-joint robots on horizontal molding machines ■ Super engineering plastics (PPS GF+MD) 55, compatible with heat resistance properties ■ Handling super engineering plastics with large machines in the 450t class ■ Compliance with dimensional accuracy requirements *For more details, please refer to the PDF materials or feel free to contact us.

• Other polymer materials
• Rubber

The resinization of metal parts offers environmental benefits such as water resistance, insulation, chemical resistance, and the substitution of finite metal resources. It contributes to the lightweighting of automobiles, which in turn extends driving range and reduces CO2 emissions. The market for metal alternatives is growing by nearly 10% each year. Our company designs precisely and manufactures molds using advanced machining techniques. Additionally, we customize molding machines and manage the molding environment (temperature and humidity) to ensure stable quality. **Benefits of Metal Substitution (Resinization)** - Weight reduction - Cost reduction - Increased design flexibility - CO2 reduction *For more details, please refer to the PDF document or feel free to contact us.*

• plastic
• Other polymer materials

TPE (Thermoplastic Elastomer) is a functional resin material that combines the characteristics of rubber and resin. When heated, TPE flows into a viscous state. By molding it with a plastic injection molding machine, parts that would typically require assembly of several components with other materials can be formed into a near-finished product all at once, without the need for mixing or measuring, and without the need for deburring. In rubber molding, a vulcanization (cross-linking) process was required separately, but TPE can achieve elasticity without vulcanization. This reduction in processes can lead to cost savings. 【Features】 - Lightweight and cost-effective compared to rubber - Shorter production process due to the absence of a vulcanization step - Alternative to rubber - Recyclable - Environmentally friendly material - Easy to color *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

"Gas Injection (AGI Molding Method)" enables hollow molding that considers product rigidity enhancement, warpage improvement, shrinkage reduction, and weight reduction. It solves the issues of conventional injection molding and achieves a high level of dimensional accuracy that was previously difficult to attain. Instead of maintaining pressure after resin filling in standard injection molding, nitrogen gas is injected to maintain pressure from within the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and flash that were problems in traditional molding. 【Features】 ■ Metal replacement ■ Enhanced product rigidity ■ Improvement of warpage and shrinkage ■ Weight reduction *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

The substitution of metal with resin offers benefits such as improved design flexibility, weight reduction, and CO2 reduction. Our company conducts precise design and uses advanced processing technology to manufacture molds. In engineering plastic molding, it is necessary to maintain the mold temperature at a higher level compared to general-purpose resins, so instead of adopting heater specifications to keep the mold temperature uniform, we use pressurized hot water temperature control. To ensure stable quality, we use a special specification that is highly resistant to corrosion and wear. **Benefits of metal substitution (resinization)** - Weight reduction - Cost reduction - Increased design flexibility - CO2 reduction *For more details, please refer to the PDF document or feel free to contact us.*

• Contract manufacturing

"PBT/PBTGF" is a resin with excellent balance in electrical properties, heat resistance, heat aging resistance, and friction and wear characteristics. PBT (with GF) is also available for proposal. It is suitable as an alternative to moisture-absorbing PA66 for automotive electrical and electronic components. The material is resin, engineering plastic, and the lot size ranges from 1,000 to 100,000 pieces. 【Specifications】 ■ Material: Resin, Engineering Plastic ■ Lot Size: 1,000 to 100,000 pieces ■ Industry: Batteries, Automotive (mass production), Automotive Electrical Components *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

Introducing "PC (Polycarbonate)" for injection molding. With excellent transparency, impact resistance, heat resistance, and flame resistance, we are working to reduce burr generation. The precision ranges from 0.1mm to 1/100mm, making it suitable for use in automotive (mass production) and office equipment. 【Specifications】 ■ Material: Resin, engineering plastics ■ Lot: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm ■ Industries: Automotive (mass production), office equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

Introducing "PC (Transparent Polycarbonate)" for injection molding. The precision ranges from 0.1mm to 1/100mm. It can be utilized in automotive (mass production), office equipment, and medical devices. Additionally, it excels in transparency, impact resistance, heat resistance, and flame resistance, and we are working on reducing burr generation. 【Specifications】 ■ Material: Resin, engineering plastics ■ Lot: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm ■ Industry: Automotive (mass production), office equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

We would like to introduce the "PC Battery Case" made through injection molding. It possesses mechanical properties such as transparency and impact resistance, making it suitable for use in automobiles (mass production), office equipment, and medical devices. The lot size ranges from 1,000 to 100,000 units, with a precision of 0.1mm to 1/100mm. 【Specifications】 ■ Material: Resin, engineering plastics ■ Lot size: 1,000 to 100,000 units ■ Precision: 0.1mm to 1/100mm ■ Industries: Automotive (mass production), office equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other Auto Parts

We would like to introduce "PC (Polycarbonate)" for injection molding. It excels in transparency, impact resistance, heat resistance, and flame resistance, and we are working to reduce burr generation. The lot size ranges from 1,000 to 100,000 pieces, with a product specification accuracy of 0.1mm to 1/100mm. 【Features】 ■ Excellent transparency, impact resistance, heat resistance, and flame resistance ■ Committed to reducing burr generation ■ Industries: Automotive (mass production), office equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

We would like to introduce super engineering plastics for injection molding. These materials have heat resistance and are compatible with PPSGF60%. The lot size ranges from 1,000 to 100,000 pieces, with precision specifications of 0.1mm to 1/100mm. They can also be utilized in automotive (mass production), office automation equipment, and medical devices. 【Specifications】 ■ Material: Resin, super engineering plastics, glass fiber resin ■ Lot size: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm ■ Industries: Automotive (mass production), office automation equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other machine tools

Introducing a cylinder screw suitable for engineering plastic molding. It has corrosion and wear resistance, reducing losses such as gas burning, flash, and wear. The lot size is between 1,000 and 100,000 pieces, with a precision of 1/100 to 1/1000 mm. 【Specifications】 ■ Material: Resin, engineering plastic, glass fiber resin ■ Lot size: 1,000 to 100,000 pieces ■ Precision: 1/100 to 1/1000 mm ■ Industries: Automotive (mass production), consumer electronics, IT and mobile *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other machine tools

Our company, which conducts integrated production, has also achieved efficiency in the production line through computer control and mechatronics in the development of pumps. We maintain quality and control production volume at a high level, working towards creating reliable products. Please feel free to contact us when you need our services. 【Features】 <Small DC Diaphragm Pump (Micro Pump)> ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Other pumps

At Tada Plastic Industry, we handle everything from planning to flow analysis. To ensure stable quality, we conduct flow analysis and create molds. We also provide suggestions for optimal wall thickness settings and measures against warping, such as the installation of ribs and flanges. From the planning stage to mass production, you can entrust all aspects of your product to Tada Plastic. 【Overview】 ■ Planning ■ Structural Design ■ Structural Analysis and Reliability Testing ■ Component Design ■ Flow Analysis *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing
• Mold Design
• Other contract services

We will introduce the development and mass production process of small micro pumps (micro pumps). We will hold discussions on the application and necessary functions of the micro pump, and design a micro pump that meets the required flow rate and pressure based on the specifications. In line with the production plan, we will design the process and carry out mass production to manufacture the necessary lots with stable quality by the delivery date. Additionally, we will conduct various tests using different testing equipment such as oscilloscopes, vibration testing devices, and constant temperature and humidity testing machines. 【Specifications】 ■ Materials: Resin, rubber, assembled products ■ Lot size: 1,000 to 10,000 units ■ Industries: Automotive (mass production), office automation equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other pumps

We would like to introduce a case study on the improvement of micro pumps for disinfectants and detergents. There were issues where the detergent would not be drawn up during replacement, and the foam remaining in the piping caused the detergent to become stagnant. To address this, we implemented a structure that allows for the reversal of rotation direction and varied the stroke to ensure the necessary flow rate, thereby resolving the issues during suction. We obtained a patent for this original pump, which is unique to TADAPLA, making it our proprietary micro pump. [Case Study] ■ Product: Micro pump for disinfectants and detergents ■ Challenges - Detergent does not get drawn up during replacement - While the pump pressure can be increased, the flow rate becomes too high to meet specifications - Reducing the flow rate by slowing down the gears is possible, but it does not align with cost considerations *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other pumps

Our company owns a "small polyurethane injection machine." It is flame-retardant and suitable for small lots and small sizes. In polyurethane molding, it can handle both rigid and flexible polyurethane molding, as well as the mixing of fillers and other materials. Additionally, the lot size ranges from 100 to 1,000 units, making it useful for automotive prototypes and mass production, as well as construction components. 【Specifications】 ■ Material: Resin, polyurethane, thermosetting resin ■ Lot size: 100 to 1,000 units ■ Industry: Automotive (prototypes), automotive (mass production), construction components *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other machine tools

We would like to introduce Tada Plastic Industry's "Soft Polyurethane Molding." We can accommodate everything from prototypes to mass production. It can be utilized in automobiles (mass production), robots, and construction machinery parts. If you have any questions, please feel free to contact us, including for samples. 【Specifications】 ■ Material: Resin, Polyurethane, Thermosetting Resin ■ Lot: 100 to 1,000 pieces ■ Industry: Automobiles (mass production), Robots, Construction Machinery Parts *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Contract manufacturing

Rigid Urethane Molding Alpolic Sandwich Panel 【Application】 Insulation material for air cargo refrigerated carts 【Features】By injecting urethane between Alpolic panels, it can be integrally molded (bonded) with the panels, resulting in high performance compared to other insulation materials. This allows for thinner wall thickness, ensuring more volume for transporting larger amounts of cargo. ■ Uses high-performance urethane (cyclopentane material) with excellent insulation properties. Thermal conductivity: 0.021 W/mk (initial value) Approximately 30% more efficient compared to typical expanded PS (0.034 W/mk). ■ Environmental properties Ozone depletion potential is zero, and the global warming potential is extremely low. *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic utensils and containers

By injecting urethane between the alpolic panels, it allows for integral molding (adhesion) with the panels. This results in high performance compared to other insulation materials, enabling thinner wall thickness and securing more volume for transporting larger amounts of cargo. ■ Uses high-performance urethane (cyclopentane material) with excellent insulation properties. Thermal conductivity: 0.021 W/mk (initial value) Approximately 30% more efficient compared to typical foamed PS (0.034 W/mk). ■ Environmental considerations Uses materials with an ozone depletion potential of zero and an extremely low global warming potential.

• Plastic utensils and containers