多田プラスチック工業 List of Products and Services

By injecting urethane between the Alpolic panels, it is possible to achieve integral molding (adhesion) with the panels. This results in higher performance compared to other insulation materials, allowing for thinner wall thickness and more volume to be secured, enabling the transportation of more cargo. ■ Uses high-performance urethane (cyclopentane material) with excellent insulation properties. Thermal conductivity: 0.021 W/mk (initial value) Approximately 30% more efficient compared to typical foamed PS (0.034 W/mk). ■ Environmental considerations Uses materials with an ozone depletion potential of zero and an extremely low global warming potential.

• Plastic utensils and containers

Rigid Urethane Molding - Three Types of Foaming Systems ■ Equipment Open Cell Foaming Rigid Urethane Foaming Equipment (Cyclopentane Specification) Total Length (One Loop) 108m × 54 Stages (Trolley) Flexible line equipped with high-pressure foaming machine and high-speed automatic traversing ■ Equipment Closed Cell Foaming (Multi-Stage Press) Rigid Urethane Foaming Equipment (Cyclopentane Specification) High-Pressure Foaming Machine Multi-Stage Hot Press Machine... 1570mm × 1520mm × 120mm × 5 Stages ■ Equipment Box Foaming Rigid Urethane Foaming Equipment (Cyclopentane Specification) High-Pressure Foaming Machine Capable of small-scale production and prototype support * The producible dimensions for each equipment vary depending on the shape, so please contact us for details.

• Plastic utensils and containers

Product Proposal High-performance portable cooler for vehicles (foldable) A container that can keep items cool like a refrigerated vehicle, even in regular cars. By placing vacuum insulation material in the center of polyurethane insulation, it maintains an internal temperature of 3 degrees Celsius even at an outside temperature of 30 degrees Celsius.

• Other pumps

Pump unit for cleaning when the camera lens for vehicle use gets dirty Compact DC pump (micro pump mechanism and structural design) / Housing molding / Assembly ■ For ADAS driving support & security driving assistance system Backup monitor components ■ The compact DC pump (micro pump) is proposed from the mechanism and structural design and produced in our factory ■ Some of the resin molded products, including the housing, are produced in our factory Features High flow rate, high pressure, optimal unit design - Achieves cleaning power through high flow rate and high pressure. - By designing the mechanism and structure within the unit, further reduction of noise and vibration is achieved.

• Other pumps

Pump unit for cleaning when the camera lens for vehicle use gets dirty Compact DC pump (micro pump mechanism and structural design) / Housing molding / Assembly ■ For ADAS driving support & security driving assistance system Backup monitor components ■ The compact DC pump (micro pump) is proposed from the mechanism and structural design and produced in our factory ■ Some resin molded products, including housing molding, are produced in our factory Features High flow rate, high pressure, optimal unit design ・ Achieves cleaning power through high flow rate and high pressure. ・ By designing the mechanism and structure within the unit, further reduction of noise and vibration is achieved.

• Other pumps

Proposal for Automotive Camera Cleaning Unit - Small DC Pump (Micro Pump Mechanism and Structural Design) / Housing Molding / Assembly - For ADAS Driving Support & Security Driving Assistance System Backup Monitor Components - The small DC pump (micro pump) is proposed from the mechanism and structural design and produced at our factory - Some of the resin molded products, including housing molding, are produced at our factory Features - High flow rate, high pressure, optimal unit design - Achieves cleaning power through high flow rate and high pressure. - By designing the mechanism and structure within the unit, further noise and vibration reduction is achieved.

• Other pumps

Home-use cogeneration ultra-compact DC diaphragm pump (micro pump) R15 type for gas (pressurized) proposal (under development) Application proposals: - Fuel cells for automobiles - Water heaters - Home cogeneration - Smartphones The "R15 series" is a small DC diaphragm pump (micro pump) for gas. With a body weight of less than 15g, it is ultra-compact and has a durability of over 200 hours. It has also been adopted in gas detectors. We offer "R15A5A3K100" with a rated voltage of DC3V and "R15A5A6K100" with DC6V. ■ Features - Ultra-compact size - Proven adoption in gas detectors (handheld type) - Sample available - Low flow rate

• Other pumps

Automotive Fuel Cell Ultra-Compact DC Diaphragm Pump (Micro Pump) R15 Type For Gases (Pressurized) Proposal (Under Development) Application Proposals - Automotive Fuel Cells - Water Heaters - Home Cogeneration - Smartphones The 'R15 Series' is a small DC diaphragm pump (micro pump) for gases. The main body weighs less than 15g and is ultra-compact, with a durability of over 200 hours. It has also been adopted in gas detectors. We offer the "R15A5A3K100" with a rated voltage of DC3V and the "R15A5A6K100" with DC6V. ■ Features - Ultra-compact size - Proven adoption in gas detectors (handheld type) - Sample availability - Low flow rate

• Other pumps

Camera lens cleaning, etc. Small DC diaphragm pump (micro pump) S45 type for gas (pressurized discharge) S45A2H12K Application Automotive parts lens cleaning, etc. Improved monitor visibility Used in various other applications.

• Other pumps

Flow rate of 1.7L/min or more, small DC diaphragm pump (micro pump) R27 flow rate UP type for gases (pressurized discharge) ■ Features - High pressure, low noise - Compact and lightweight - Self-priming - Brushed motor: DC12V, 24V - Brushless motor: DC12V, 24V - Rubber parts mainly made of EPDM ■ Applications - Internal pressurization/depressurization - Detergent foaming - Airbrush - Gas sampling - Airbag expansion/contraction - Product adhesion - Used in various other applications

• Other pumps

Low Noise Small DC Diaphragm Pump (Micro Pump) R27 Type for Gas (Pressurization/Suction) R27A5A24K103 ■Features - High pressure, low noise - Compact and lightweight - Self-priming - Rubber parts are mainly made of EPDM ■Applications - Chamber pressurization/depressurization - Detergent foaming - Airbrush - Gas collection - Airbag expansion/contraction - Product adhesion - Used in various other applications

• Other pumps

Food Sanitation Act Compliant Small DC Pump (Micro Pump) Small DC Diaphragm Pump for Gases (Pressurization and Discharge) Small DC Centrifugal Pump for Liquids ■ Small DC Diaphragm Pump (Micro Pump) R27 Flow Rate UP Type for Gases Applications - Internal Pressure/Depressurization - Detergent Foaming - Airbrush - Gas Collection - Airbag Expansion/Contraction - Product Adsorption - Used in various other applications

• Other pumps

ROHS compliant small DC pump (micro pump) Small DC diaphragm pump for gases (pressurization and discharge) There may be cases where EPDM (phthalate-free) can be proposed as an alternative to NBR. ■ Small DC diaphragm pump (micro pump) R27 flow rate UP type for gases Applications - Internal pressurization/depressurization - Detergent foaming - Airbrush - Gas sampling - Airbag expansion/contraction - Product adhesion Used in various other applications.

• Other pumps

ROHS compliant small DC diaphragm pump (micro pump) For gas (pressurization and discharge) and liquid There may be cases where EPDM (phthalate-free) can be proposed as an alternative to NBR. ■ Small DC diaphragm pump (micro pump) R27 flow rate UP type for gas Applications: - Chamber pressurization/depressurization - Detergent foaming - Airbrush - Gas sampling - Airbag expansion/contraction - Product adhesion Adopted for various other applications as well.

• Other pumps

ROHS compliant small DC diaphragm pump (micro pump) For gases (pressurization and discharge) and liquids There may be cases where EPDM (phthalate-free) can be proposed as an alternative to NBR. ■ Small DC diaphragm pump (micro pump) R27 flow rate UP type for gases Applications - Chamber pressurization/depressurization - Detergent foaming - Airbrush - Gas sampling - Airbag expansion/contraction - Product adhesion - Used in various other applications.

• Other pumps

Small DC centrifugal pump (micro pump) with long-life bearing (PTFE Teflon) type. We will provide the bearing (PTFE Teflon) type for liquids.

• Other pumps

Small DC centrifugal pump (micro pump) high lifespan ceramic (shaft) type. We will provide a ceramic (shaft) type for liquids.

• Other pumps

Our company develops pumps in-house. With a robust design, they feature a compact body that offers high pressure and flow rates while consuming low power. Additionally, they are self-priming, allowing for flexible installation locations. Furthermore, by utilizing fluid analysis technology in the internal structure design, we have successfully achieved even lower noise levels while maintaining high efficiency. We are committed to our unique resin molding technology, which realizes excellent cost performance and lightweight construction. Features: - High vacuum, high pressure - Low noise - Low cost - Widely usable for gas and liquid applications - Compact size - Brushed motor: DC12V, 24V - Brushless motor: DC12V, 24V - Rubber parts are primarily made of EPDM.

• Other pumps

We offer a compact, lightweight, high-pressure, and low-noise "Small DC Diaphragm Pump" (Micro Pump). This product is self-priming and does not require priming water, and can be used for both gases and liquids. It is compatible with a variety of liquids and temperatures. Rubber parts are mainly available in EPDM. In addition, we also offer a "Small DC Centrifugal Pump" (Micro Pump) that is designed for long life and toughness. Small DC Diaphragm Pump (Micro Pump) Features - High pressure, low noise - Compact, lightweight - Brushed motor: DC12/24V - Brushless motor: DC12/24V - Compatible with various fluids and temperatures (can pump ink and hot water) Small DC Centrifugal Pump (Micro Pump) Features - Achieves compactness, lightweight, and low cost through optimized casing structure - Adopts a magnetic coupling method utilizing magnetic force - Eliminating the shaft maintains consistently clean discharge - Long life and tough design that easily exceeds a total durability time of 200 hours

• Other pumps

Oxygen removal is possible! Introducing a micropump that can maintain a high vacuum level with a maximum negative pressure of -80 kPa. At Tada Plastic Industry, we handle "high vacuum pumps." We create a vacuum state with a maximum negative pressure of -80 kPa. We can design and propose higher vacuum levels and shapes tailored to your applications. We encourage home appliance manufacturers and housing equipment manufacturers to make use of this. Features: - Can maintain a high vacuum level - Maximum negative pressure of -80 kPa - Customizable according to application - Proven performance in cooking devices, pressure cookers, rice cookers, toilets, and refrigerators - Oxygen removal is possible

• Other pumps

A self-developed product that has evolved and fused approximately 100 years of technology: "Compact DC Pump" (Micro Pump) - Compact DC Diaphragm Pump and Compact DC Centrifugal Pump. ■ Compact DC Diaphragm Pump (Micro Pump) A dual-purpose 2-WAY pump that can use both air and liquid. Made of engineering plastic for chemical resistance and high durability. A powerful self-priming pump. Features: - Customized design tailored to applications. Compatible with both air and liquid. Designed to meet various requirements, providing compact and optimal products. - Powerful performance achieving high vacuum. Despite its compact size, it has high suction and discharge capabilities, enabling both pressurization and depressurization with a single unit. ■ Compact DC Centrifugal Pump (Micro Pump) Unique magnetic coupling method. Operable from a distance with magnetic power. A pump that can also handle high-temperature water, utilizing centrifugal force. Features: - Unique magnetic coupling method. Adopts a system that rotates the impeller in the flow path using magnetic force. Since the flow path and motor are separated, there is no need for a shaft seal, eliminating concerns about liquid leakage. - There is also a separable version for easy maintenance.

• Other pumps

Our company produces automotive parts, specifically "fenders (plastic outer panels)," using large-scale injection molding. We contribute to weight reduction and cost savings through metal alternatives. Due to the design flexibility, there are cases where the number of parts can be reduced depending on the area. Please feel free to contact us when you need our services. 【Features】 ■ Contributes to weight reduction and cost savings through metal alternatives ■ Effect of reducing the number of parts depending on the area ■ Design flexibility ■ Corrosion resistance ■ Collision safety *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other Auto Parts
• Contract manufacturing

The "Thermoplastic Carbon Fiber Composite (PA6 CF20%)" meets the performance requirements for metal alternative EMI shielding and has a proven track record in computer enclosures. It excels in wear resistance, sliding properties, conductivity, and electromagnetic shielding, while also allowing for design flexibility, lightweight construction, and recyclability. In injection molding, we conduct CAE analysis to propose appropriate product shapes and optimal wall thicknesses. Additionally, with support from material manufacturers, we can provide technical support ranging from material analysis and crack analysis to development assistance and defect countermeasures. 【Features】 ■ High strength and high elasticity ■ Excellent wear resistance and sliding properties ■ Excellent conductivity and electromagnetic shielding ■ Low specific gravity (compared to Al/Mg metals and glass fiber reinforced plastics) ■ Design flexibility, lightweight construction, and recyclability *For more details, please refer to the PDF document or feel free to contact us.

• plastic

HEVs require handling high currents and high voltages due to the use of high-output motors. Therefore, materials for connectors and terminals must have heat resistance and electrical reliability (high dielectric strength and tracking resistance). "SPS (engineering plastic)" has excellent electrical properties because it does not have polar groups, making it suitable for electrical and electronic components used in HEVs. 【Features】 ■ Low specific gravity (lower than other engineering plastics) ■ Heat resistance (high load deflection temperature 250°C, low load deflection temperature 268°C) ■ Hydrolysis resistance ■ Chemical resistance (acid resistance, alkali resistance, oil resistance, aliphatic solvent resistance) ■ Electrical properties (extremely low dielectric loss, good tracking resistance) *For more details, please refer to the PDF document or feel free to contact us.

• plastic

"Thermoplastic Carbon Fiber Composite (PP CF 20%)" is used in the front-end module of automotive parts. In injection molding, there is flexibility in the choice of resin base, and we propose suitable grades. We conduct CAE analysis to suggest appropriate product shapes and optimal wall thicknesses. Additionally, with support from material manufacturers, we can provide technical support ranging from material analysis and crack analysis to development support and defect countermeasures. Furthermore, we customize injection molding machines to maximize the performance of carbon fiber reinforced resins. 【Features】 ■ High strength and high elasticity ■ Excellent wear resistance and sliding properties ■ Superior conductivity and electromagnetic shielding ■ Low specific gravity (compared to Al/Mg metals and glass fiber reinforced resins) ■ Design flexibility, thin-walling, and recyclability are possible *For more details, please refer to the PDF document or feel free to contact us.

• plastic

We would like to introduce the 'resins' handled by Tada Plastic Industry. Our lineup includes "PA6," which excels in chemical resistance, toughness, impact resistance, and flexibility, as well as "PPS (GF30% to 65%)," which has excellent heat resistance and high-temperature properties. We can propose metal alternatives for automotive parts. Please feel free to contact us when needed. 【Features】 ■ PA6: Excellent in chemical resistance, toughness, impact resistance, and flexibility ■ PA66: Excellent in chemical resistance, with superior heat resistance and mechanical strength compared to nylon 6 ■ PBT: Excellent heat resistance, and we can also propose PBT (with GF) ■ PC (Polycarbonate): Excellent transparency, impact resistance, heat resistance, and flame resistance ■ POM (Polyacetal): Low water absorption, excellent sliding properties, and wear resistance *For more details, please refer to the PDF materials or feel free to contact us.

• plastic

Tada Plastic Industry Co., Ltd.'s injection molding can accommodate a wide range of production from small items to large ones. We handle general-purpose resins such as "PP ABS," engineering plastics like "PC PBT," and super engineering plastics such as "PSF PPS." Please feel free to contact us when you need assistance. 【Overview】 ■ General-purpose resin PP ABS ■ Engineering plastic PC PBT ■ Super engineering plastic PSF PPS ■ Insert molding (e.g., adjusters) ■ Gas-assisted molding (e.g., rice cookers, handles) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

Our company owns "injection molding equipment." We have a lineup of 32 machines ranging from 20t to 450t. We turn ideas into "forms" with technology. Please feel free to contact us when you need our services. 【Equipment Owned (Partial)】 ■50t: Fanuc, Sumitomo Heavy Industries, Toyo Machinery & Metal - 5 units ■65t: Fanuc - 2 units ■100t: Toyo Machinery & Metal - 2 units ■125t: Fanuc - 1 unit ■130t: Sumitomo Heavy Industries, Toyo Machinery & Metal - 2 units *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

Tada Plastic Industry Co., Ltd. offers decorative items such as hot stamping, silk printing, and plating. For example, it is possible to apply "ABS + hot stamping" to refrigerator door caps or "ABS + painting" to outer handles. Please feel free to contact us when you need our services. 【Other Decorations】 ■ Painting ■ Pad printing ■ Water transfer ■ Special 3D printing ■ Vacuum deposition ■ Sputtering ■ Heat transfer *Please note that we do not have the equipment for decorations. We will work with partner companies for this. *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

Our company realizes products that meet various customer requests by combining secondary processing such as "painting." By adding metallic and pearl effects, we can create a sense of luxury, and by applying various stabilizers and UV absorbers, we can improve weather resistance. Please feel free to contact us when you need our services. 【Features】 ■ Luxury: Hides processing marks and color unevenness, adds metallic and pearl effects ■ Improved surface hardness: Coated with silicone-based or acrylic-based paints ■ Enhanced weather resistance: Coated with various stabilizers and UV absorbers *Regarding decoration, our company does not have the necessary equipment. It will be handled by a partner company. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

We would like to introduce our decorative technology, "vacuum deposition plating." "Vacuum deposition" is one method of imparting a metallic luster to plastics. In a vacuum, the temperature at which metals vaporize can be lowered, allowing materials such as aluminum, gold, silver, and zinc to be used as deposition metals, with aluminum deposition being the mainstream for decorative purposes. Additionally, "sputtering" has the characteristic of being able to apply metal plating to various resins other than ABS resin, which broadens its application fields. It is widely used for decorative purposes as well as in automotive, low-voltage, optical, and various industrial equipment. On the other hand, compared to other decorative methods, the film formation speed is slow, and the high cost per area is considered a challenge. *Please note that we do not have the equipment for decoration. We will be working with partner companies for this. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

"Resin plating" is a decorative technology that allows for the application of a metallic luster and plating treatment to plastics, which are poor electrical conductors, primarily ABS. ABS is composed of three components: acrylonitrile, butadiene, and styrene. By oxidizing and dissolving the butadiene component to create a surface with anchoring effects, both electroless plating and electroplating can be performed, resulting in a plated film on the surface. 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm *Please note that we do not have the equipment for decoration. This will be handled by our partner companies. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

"In-mold molding" is a decorative technology that can reduce processes such as painting, leading to savings in time and costs. It allows for hard coating treatment to be performed simultaneously with molding, accommodating a wide range of variations such as chrome-like finishes and surface textures. Additionally, compared to painting and plating processes, the use of organic solvents can be reduced, making it environmentally friendly. 【Features】 ■ Reduces processes such as painting, enabling savings in time and costs ■ Capable of accommodating complex shapes, offering excellent design flexibility ■ Supports a wide range of variations such as chrome-like finishes and surface textures ■ Allows for hard coating treatment to be performed simultaneously with molding ■ Reduces the use of organic solvents compared to painting and plating processes *Please note that we do not have the equipment for decoration. It will be handled by partner companies. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

"Hot stamp heat transfer" is a technique for embellishing a design surface by applying heat. Also known as foil stamping, it is a method that involves pressing with a heated relief plate to adhere the foil material. The surface of the foil has an adhesive layer, and when it comes into contact with the heated relief plate, it is transferred onto the product. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot size: 1,000 to 100,000 pieces ■ Accuracy: 0.1mm to 1/100mm *Regarding embellishments, we do not have the necessary equipment. It will be handled by a partner company. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

We would like to introduce the decorative technologies of our partner company. These include "heat transfer (hot stamping)," which decorates heated design surfaces, and "resin plating," which can reproduce the texture and feel of metal. Please feel free to contact us when you need our services. 【Features】 ■ Heat transfer (hot stamping): Decoration on heated design surfaces ■ In-mold forming: Decoration on the uneven surfaces of small to medium-sized molded products ■ Resin plating: Reproduces the texture and feel of metal ■ Vacuum metallization: Has brightness and does not block radio waves ■ Painting: Decoration possible regardless of the substrate *Please note that we do not have the equipment for decoration. It will be handled by our partner company. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Surface treatment contract service

We are currently developing a highly durable "ultra-compact diaphragm pump." The machine itself is compact, allowing for precise suction and discharge. It can be designed according to specific applications and has a proven track record in small gas detectors, cooking appliances, and more. We encourage detector manufacturers, other inspection equipment manufacturers, and home appliance manufacturers to make use of this product. 【Features】 ■ Ultra-compact with a diameter of φ15 ■ Durability of 200 hours ■ Customizable design for various applications ■ Proven track record in small gas detectors, cooking appliances, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Our company possesses "automatic insert molding equipment." We use horizontal molding machines for robot-assisted insert molding of four types of colors/nuts at 12 locations, ensuring dimensional stability. The lot size ranges from 1,000 to 100,000 pieces, with precision from 1/100 to 1/1000 mm. 【Specifications】 ■ Material: Super engineering plastics, glass fiber resin, assembled products ■ Lot size: 1,000 to 100,000 pieces ■ Precision: 1/100 to 1/1000 mm *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts

We proposed a cleaning unit for automotive sensors and camera lenses. With a design that features high flow rate, high pressure, and optimal unit configuration, we achieved powerful cleaning capabilities through high flow and pressure. By designing the mechanism and structure within the unit, we further reduced noise and vibration. This unit can be used to prevent the degradation of detection performance caused by surface dirt such as rain, snow, mud, and insects, as well as for cleaning sensors to maintain detection performance. 【Specifications】 ■ Material: Rubber, super engineering plastics, assembled products ■ Lot: 1,000 to 100,000 units ■ Industry: Automotive (mass production), railway, robotics *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other Auto Parts

At Tada Plastic Industry, we handle small DC diaphragm pumps (micro pumps). We have a delivery record of 10 million units, and they are compact in size, low-cost, high vacuum, high pressure, and low noise. They can be used for gases and liquids. We mainly provide rubber components made of EPDM. 【Specifications】 ■ High pressure, low noise ■ Small and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Brushed motor: DC 12V, 24V ■ Brushless motor: DC 12V, 24V *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Processing Contract

Injection molding small precision factory (injection molding machine) has been converted into a clean booth. We create a clean space with temperature and humidity-controlled equipment aimed at expanding precision molding, preventing foreign matter adhesion. We handle injection molding machines from 50t to 230t, with dimensional tolerances of ±0.005mm, and we are working down to the 0.1μm level. 【Specifications】 ■ Material: Resin, super engineering plastics, engineering plastics ■ Lot: 1,000 to 100,000 pieces ■ Accuracy: 1/100 to 1/1000mm ■ Industry: Automotive (mass production), electronic components, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We have achieved weight reduction by converting aluminum die-cast products to resin. (In our efforts to improve fuel efficiency, we have achieved a 50% reduction.) Additionally, to ensure product strength, we have realized the replacement from aluminum die-casting through material development with material manufacturers. (Based on PA66) Since strength varies depending on the product shape, we conducted approval processes with customers. 【Specifications】 ■ Material: Resin, super engineering plastics, engineering plastics ■ Lot size: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm ■ Industry: Batteries, automotive (mass production), automotive electrical components *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other Auto Parts

At Tada Plastic Industry, we are capable of managing dimensions at the micron level. We create a clean space to prevent foreign matter adhesion with temperature and humidity-controlled facilities aimed at precision molding expansion. Our injection molding machines range from 50t to 230t, and we work with dimensional tolerances of ±0.005mm, down to 0.1μm. 【Specifications】 ■ Materials: Resin, super engineering plastics, engineering plastics ■ Lot size: 1,000 to 100,000 pieces ■ Accuracy: 1/100 to 1/1000mm ■ Industries: Automotive (mass production), IT/mobile, robotics *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other electronic parts
• Other Auto Parts

At Tada Plastic Industry, we carry out the assembly from unit parts to finished products in-house. By designing production lines aimed at improving productivity and efficiently integrating assembly techniques using both automated machines and human labor, we have established production lines that achieve stable quality and high production capacity. Additionally, we can accommodate assembly in Class 10000 and Class 100000 environments (approximately 600m2) according to quality levels. 【Specifications】 ■ Materials: Resin, rubber, assembled products ■ Lot size: 1,000 to 10,000 pieces ■ Industries: Automotive (mass production), OA equipment, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other pumps

At Tada Plastic Industry, we address the essential quality improvement of precision injection molding through equipment that includes precision molding machines, mold temperature management, and sensors. For example, in the automation of inspections—using in-mold pressure sensors—we monitor the in-mold pressure waveform and determine defects in real-time. In the case of a defect, it is automatically discharged outside the system. (Line out) 【Specifications】 ■ Material: Resin, super engineering plastics, engineering plastics ■ Lot size: 1,000 to 100,000 pieces ■ Accuracy: 1/100 to 1/1000 mm ■ Industry: Automotive (mass production), electronic components, medical devices *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We would like to introduce open-cell rigid polyurethane foam molding. With a total length (one loop) of 108m and 54 stages (trolleys), it features a high-pressure foaming machine and a high-speed automatic traversing system, making it a flexible line. The producible dimensions of each equipment vary depending on the shape, so please contact us for more details. 【Specifications】 ■ Material: Resin, polyurethane, thermosetting resin ■ Lot: 1,000 to 10,000 pieces ■ Industry: Automotive (mass production), electronics and home appliances, building components *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Processing Contract