多田プラスチック工業 List of Products and Services

We would like to introduce our "Commercial Inkjet Printer Label Suction Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber parts primarily made of EPDM. It is used for various applications including "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product suction." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Linerless Printer Label Suction Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber parts primarily made of EPDM. It is used for various applications, including "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Commercial Copy Machine Label Suction Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber parts primarily made of EPDM. It is used for various applications including "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our product: "Health Care Pillow Head Cooler Water Supply Small DC Diaphragm Pump (Micro Pump) for Liquids." The height of the pillow can be adjusted according to your condition. The rubber components are primarily made of EPDM. It is used for various applications, including hot water supply, spraying various liquids, cooling water circulation, and condensate water distribution. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Motor with brushes: DC12V・24V ■ Brushless motor: DC12V・24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Commercial OA Equipment Projector Cooling Small DC Diaphragm Pump (Micro Pump) for Liquids." The lot size is between 1,000 and 10,000 units. It is self-priming and does not require priming water, with rubber parts primarily made of EPDM. It can provide pinpoint cooling of valves with strong pressure from a distance. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Compact DC Diaphragm Pump." Its compact design contributes to space-saving for your products. It operates at high pressure and low noise, with rubber components primarily made of EPDM. It can be used in various industries, including automotive (mass production), office automation equipment, and medical devices. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Brushed motor: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Industrial Inkjet Printer Toner Transfer Powder Small DC Diaphragm Pump (Micro Pump)." It can be used for gases and liquids. The lot size is between 1,000 and 10,000 units, and it features high pressure and low noise. We handle models such as "R27A5A12K103" for pressurization/suction, "R27A5B12K103," and "R27A2A12F103" for liquids (equivalent to tap water). 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Motor with brushes: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "OA Equipment Ink Delivery and Waste Liquid Small DC Diaphragm Pump for Liquids." The lot size ranges from 1,000 to 10,000 units. It is suitable for ink delivery and waste liquid in OA equipment, and we also offer a fluorine type. We handle liquids equivalent to tap water, including "R27A2A12F103," "R27A2A48K103," and "R27A2A12P103." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Copy Machine Ink Circulation Liquid" that we handle. It is suitable for ink circulation, and we also offer a fluorine type. It is used for various other applications as well. Its compact and lightweight design is a notable feature. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Copy Machine Ink Supply Liquid." It is suitable for ink supply, and we also offer a fluorine type. It is used for various other applications as well. It is compact and lightweight, with rubber parts primarily made of EPDM. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Industrial Inkjet Printer Ink Circulation Liquid" that we handle. The lot size is between 1,000 and 10,000 units. It operates at high pressure and low noise, and the rubber parts are mainly made of EPDM. We handle liquids such as "R27A2A12F103," which is equivalent to tap water, as well as "R27A2A48K103" and "R27A2A12P103." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Industrial Inkjet Printer Ink Supply for Liquid" that we handle. The lot size ranges from 1,000 to 10,000 units. It operates at high pressure and low noise, and the rubber parts are mainly made of EPDM. We offer liquids such as "R27A2A12F103," "R27A2A48K103," and "R27A2A12P103," which are equivalent to tap water. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Commercial OA Equipment Ink Waste Small DC Diaphragm Pump (Micro Pump) for Liquids." It is suitable for ink waste from OA equipment. We also offer a fluorine type, and it is used in various other applications. It can be utilized in industries such as automotive (mass production), OA equipment, and medical devices. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our "Industrial OA Equipment Ink Delivery Small DC Diaphragm Pump (Micro Pump) for Liquids." It is suitable for ink delivery in OA equipment. There is also a fluorine type available, and it is used in various other applications. It can be utilized in industries such as automotive (mass production), OA equipment, and medical devices. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

We would like to introduce our product, the "Toilet Cleaning Water Air Mixing Small DC Diaphragm Pump (Micro Pump) for Gases." It can be used for both gases and liquids. It is compact, lightweight, self-priming, and does not require a priming water supply. It can be utilized in various industries, including automotive (mass production), office automation equipment, and construction components. 【Features】 - High pressure, low noise - Compact and lightweight - Self-priming, no priming water required - Usable for gases and liquids - Brushed motor: DC3V, 12V, 24V - Brushless motor: DC12V, 24V - Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

"PA6GF and PA66GF" solve the issues of conventional injection molding through gas injection (AGI molding method), achieving high-level dimensional accuracy that was previously difficult. Hollow molding that considers product rigidity enhancement, warpage improvement, shrinkage reduction, and weight reduction is possible. Instead of maintaining high pressure after resin filling in general injection molding, nitrogen gas is injected to maintain pressure (low pressure) from inside the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and burrs that were drawbacks of traditional molding. 【Features】 - High rigidity and high strength - Good appearance quality (high gloss) - High durability - Reduction of component parts - Weight reduction and cost savings - Improved recyclability *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines
• Other machine elements
• Other Auto Parts

"Thin-walled molding" is a precision technology for manufacturing molds for thin-walled products, featuring high rigidity and excellent gas venting capabilities. It is crucial to accurately control the speed, pressure, and temperature of the injection molding machine, and we have a system in place that allows us to provide proposals from mold design to injection molding. By introducing high-speed and high-pressure molding machines, we can achieve thin-walling (lightweight). 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot: 1,000 to 10,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

Tada Plastic Industry conducts "thick-walled molding." From design to gate position and mold specification materials (including coloring), we consider various factors and conduct verification of molding condition changes during production. We can solve issues such as sink marks and warping in injection molding. 【Specifications】 ■ Material: Resin, super engineering plastics, general-purpose plastics ■ Lot: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Other machine elements

Tada Plastic Industry conducts "injection molding for thick and thin parts." Thick part molding using foam materials is possible. Additionally, high-speed high-pressure molding allows for the production of parts with a thickness level of 0.3mm, making it suitable for automotive (mass production), consumer electronics, and medical devices. 【Features】 ■ Materials: Resin, super engineering plastics, general-purpose plastics ■ Lot size: 100 to 1,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Tada Plastic Industry handles automotive parts made of "injection molded POM (polyacetal)." It exhibits excellent wear resistance due to its high self-lubricating properties. Additionally, it possesses outstanding mechanical properties in terms of both rigidity and toughness (impact resistance). [Examples of fuel system components with fuel resistance to eco-gasoline] ■ Hinge cam ■ Door cam ■ Handles ■ Door locks ■ Pump parts *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Other pumps

Tada Plastic Industry provides various VA/VE proposals by conducting CAE analysis. In "warpage countermeasures," we suggest appropriate gate and cooling positions. Additionally, we can analyze with moldable wall thickness to propose "thinning and weight reduction." [Features] ■ Proposal for warpage countermeasures: Suggestions for appropriate gate and cooling positions ■ Proposal for thinning and weight reduction: Analysis and proposals with moldable wall thickness ■ Proposal for appearance improvement: Suggestions for appropriate weld and gate positions ■ Proposal for suitable molding machines and expected cycles *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Analysis
• Mechanism Analysis
• Analysis Services

Our company was quick to adopt 3D CAD, which we use for product shape verification, mold design, and dimensional measurement. Additionally, we conduct design that includes a review of excessive precision, reduction of man-hours, assembly feasibility, and strength through prior verification. We have also introduced CAE analysis to verify mold feasibility, shape validity, and molding conditions in advance, aiming to shorten the development lead time from design to trial molding and mass production. 【Features】 ■ Utilizes for product shape verification, mold design, and dimensional measurement ■ Conducts design that includes prior verification of excessive precision, reduction of man-hours, assembly feasibility, and strength ■ Introduced CAE analysis ■ Aims to shorten the development lead time from design to trial molding and mass production *For more details, please refer to the PDF document or feel free to contact us.

• 3D CAD
• Structural Analysis

Tada Plastic Industry conducts "CAE analysis." By introducing CAE analysis, we verify the mold feasibility, shape validity, and molding conditions in advance. We aim to shorten the development lead time from design to trial molding and mass production. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot: 1,000 to 100,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Structural Analysis
• Other analyses

Tada Plastic Industry has developed "ultra-precision molding" capable of dimensional control at the micron level. We create a clean space with temperature and humidity-controlled equipment aimed at expanding precision molding, preventing foreign matter adhesion. The factory is equipped with IoT technology, injection molding, and tablet management, allowing real-time monitoring of development status. Additionally, precision molding machines, essential for improving the quality of injection molding (precision), are equipped with mold temperature management and sensors. 【System (Partial)】 <Temperature and humidity-controlled equipment for expanding precision molding> ■ Clean space to prevent foreign matter adhesion ■ Injection molding machines: 50t to 230t ■ Dimensional tolerance: ±0.005mm *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• others

Tada Plastic Industry Co., Ltd. fully acquired Dubless Co., Ltd. in 2016. The company possesses "machining cutting processing technology" and engages in "precision rubber molding," as well as "compression molding" and "transfer molding." [Introduction to Dubless Co., Ltd.] ■ Precision Rubber Molding - Extremely small O-rings (O-rings with a thickness of 0.5mm) ■ Compression Molding ■ Transfer Molding ■ Machining Cutting Processing Technology *For more details, please refer to the PDF document or feel free to contact us.

• Machining Center
• Rubber

At Tada Plastic Industry, we developed a camera cleaning pump unit for automotive back monitors in 2014. The compact DC pump (micro pump) was proposed from the mechanism and structural design and is produced at our factory. Additionally, some of the resin molded products, including the molding of the housing, are also produced at our factory, allowing us to respond quickly. 【Features】 ■ Appropriate unit design ■ Achieves cleaning power with high flow and high pressure ■ Mechanism and structural design within the unit ■ Low noise and low vibration *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

Tada Plastic renovated its new factory's clean room in 2010 to serve as a diaphragm pump production facility. The small DC diaphragm pump (micro pump) R27 type is used in various applications such as gas sampling, airbag inflation/deflation, and product adhesion. We also offer a wide range of other types, including "gas flow UP type" and "liquid type." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water needed ■ Usable for gases and liquids ■ Brushed motor: DC 3V, 12V, 24V ■ Brushless motor: DC 12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Tada Plastic Industry developed a diaphragm pump in 2008. The small DC diaphragm pump (micro pump) is characterized by high vacuum, high pressure, low noise, low cost, and compact size. It has a delivery record of 10 million units. It is suitable for air applications such as chamber pressurization/depressurization, detergent foaming, and airbrushes, as well as liquid applications such as hot water distribution, ink transport, and cooling water circulation. 【Features】 ■ High pressure, low noise ■ Small and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Brushed motor: DC 3V to 24V ■ Brushless motor: DC 12V and 24V ■ Rubber parts are made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Tada Plastic Industry changed the assembly of refrigerator doors from a conveyor system to a cell production method in 2009. A company that can turn ideas into "forms" through technology. As we celebrate our 100th anniversary, we will continue to enhance our technology and challenge ourselves to create new manufacturing for the future. [Overview] ■ Material: Assembled products ■ Lot: 1,000 to 10,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Refrigerators and freezers

Tada Plastic Industry started molding automotive parts in 2006. We would like to introduce examples of automotive parts (powertrain-related PCU) and automatic insert molding (injection molding + nuts) for condenser housings (enclosures). With automatic insert molding using a multi-joint robot on a horizontal molding machine, we achieved dimensional stabilization to meet the requirements for dimensional accuracy. We performed insert molding for 4 types of colors/nuts at 12 locations. As our company celebrates its 100th anniversary, we will continue to enhance our technology and challenge ourselves with new manufacturing for the future. 【Automotive Parts Example】 <Automatic Insert Molding (Injection Molding + Nuts) Condenser Housing (Enclosure)> ■ Insert molding for 4 types of colors/nuts at 12 locations ■ Dimensional stabilization through automatic insert molding with a multi-joint robot on a horizontal molding machine ■ Compatible with super engineering plastics (PPS GF+MD) 55 ■ Supported by large machines in the 450t class for super engineering plastics ■ Meeting requirements for dimensional accuracy *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts

Tada Plastic Industry introduced a non-fluorocarbon rigid polyurethane box foaming equipment in 2005. This equipment is suitable for various applications, including automobiles (mass production), leisure products, and medical devices. As our company celebrates its 100th anniversary, we will continue to enhance our technology and challenge ourselves with new manufacturing for the future. 【Specifications】 ■ Non-fluorocarbon rigid polyurethane box foaming equipment ■ Materials: resin, polyurethane, thermosetting resin ■ Lot size: 100 to 1,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our efforts in replacing metals with resins. First, we confirm the usage environment conditions and required specifications according to the customer's needs. Material selection will be proposed in collaboration with material manufacturers. After producing prototypes, we will conduct durability tests, resin degradation verification, and mold production. Next, once the customer conducts actual durability tests on the molded products, we will perform resin degradation verification on the products before and after the durability tests at the material manufacturer, making mass production possible. Our company offers proposals based on the engineering plastic molding technology we have cultivated over many years. 【Resin Flow (Partial)】 ■1. Customer needs (confirmation of usage environment conditions and required specifications) ■2. Material selection (selection of material and grade) ■3. Prototype production (production of machined parts) ■4. Durability testing (actual durability testing of machined parts by the customer) ■5. Resin degradation verification (Resin degradation verification on products before and after durability testing at the material manufacturer "SEM, viscosity measurement") *For more details, please refer to the PDF document or feel free to contact us.

• Resin mold

Tada Plastic Industry achieved the resinization (metal replacement) of motor housings for electric bicycles in 2002. The resinization of metal parts offers environmental benefits such as water resistance, insulation, chemical resistance, and the substitution of finite metal resources. It contributes to the lightweighting of automobiles, which in turn extends driving range and reduces CO2 emissions. 【Benefits of Metal Replacement】 ■ Weight reduction ■ Cost reduction ■ Increased design flexibility ■ CO2 reduction *For more details, please refer to the PDF materials or feel free to contact us.

• Resin mold
• Other motors

At Tada Plastic Industry, we introduced a hard polyurethane non-fluorinated multi-stage press foaming equipment in 2002. The precision is within general tolerance ranges, and the lot size is between 100 and 1,000 pieces. It is suitable for automotive (mass production), construction components, medical devices, and more. As our company celebrates its 100th anniversary, we will enhance our technology for future manufacturing and continue to challenge ourselves with new production methods. 【Specifications】 ■ Material: Resin, polyurethane, thermosetting resin ■ Lot size: 100 to 1,000 pieces ■ Precision: Within general tolerance range ■ Multi-stage hot press machine: 1570mm × 1520mm × 120mm × 5 stages *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Tada Plastic Industry, we changed the assembly of pumps from a conveyor system to a cell production method in 2001. The lot size ranges from 1,000 to 10,000 units, and the materials used include resin, engineering plastics, and assembled products. This is suitable for the automotive (mass production), OA equipment, and medical device industries. 【Specifications of Small DC Pump (Excerpt)】 <Small DC Diaphragm Pump (Micro Pump) R27 for Gas> ■ Application: Pressurization/Suction ■ Rated Voltage: DC12V ■ Flow Rate: 1.3L/min or more ■ Current Consumption: 200mA or less when open ■ Vacuum Level: -40kPa *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

Toda Plastic Industry introduced hard urethane non-fluorine (cyclopentane) open-cell foam equipment in 1994. The total length (one loop) is 108m × 54 stages (trolleys), featuring a flexible line equipped with a high-pressure foaming machine and a high-speed automatic traverser. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Resin, Urethane, Thermosetting Resin ■ Lot: 1,000 to 10,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

"Thermoplastic carbon fiber long fiber composite material" consists of PP CF 20% and has a proven track record in automotive front-end module components. The injection molding of "carbon long fiber reinforced resin" offers flexibility in resin base selection, allowing for the proposal of suitable grades. We conduct CAE analysis to suggest appropriate product shapes and wall thicknesses, and with support from material manufacturers, we can provide technical support ranging from material analysis and crack analysis to development support and defect countermeasures. We customize molding machines to maximize the performance of carbon long fiber resin. 【Features of carbon long fiber reinforced thermoplastic resin】 ■ High strength, high elasticity ■ Excellent wear resistance and sliding properties ■ Superior conductivity and electromagnetic shielding ■ Low specific gravity (compared to Al/Mg metals and glass fiber reinforced resins) ■ Design flexibility, thin-walling, and recyclability (characteristics of thermoplastic resins) *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

Our company, which received the Special Award from the "Osaka Excellent Manufacturing Companies 2018" judging committee, was founded in 1919. Currently, we are practicing as a "proposal-type company" that transforms "ideas" into "forms" through "technology," managing total production from planning and design to development and manufacturing, thereby growing each business by shaping the thoughts and needs of users. We have established an in-house development division and are actively engaged in technology and product development, starting with small DC pumps. In the future, we will continue to challenge ourselves with high-demand products such as medical devices and precision automotive components that require advanced quality control, in line with the needs of the times. [Overview] ■ Shaping users' thoughts and needs with highly original composite technology ■ Leave difficult molded products to us ■ Achieving in-house integrated production through the fusion of technologies *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

Our company has been involved in plastic molding for over 100 years since its founding and has started with injection molding. Since then, we have expanded our business, and now we operate on four pillars: injection molding, the development of our own small DC pumps, urethane molding, and precision rubber molding. With the keyword "creative injection-type enterprise," we shape customer needs through ideas and technology, establishing a system that comprehensively addresses everything from planning and design to development. Moving forward, we aim to level up and enhance each of our businesses, targeting fields that require high production difficulty and strict management, such as precision parts for medical devices and automotive-related products, and challenge ourselves to reach even higher levels. [Overview] ■ Diversifying and expanding our business ■ Actively participating from the corporate side and responding to needs with technology ■ Challenging the development of ultra-small DC pumps and increasing our own products ■ Aiming for level-up while also looking at high-difficulty fields *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

The intermediate material between soft and hard is called "semi-rigid urethane." It is a medium material between hard and soft, mainly used for shock-absorbing materials. Tada Plastic Industry turns ideas into "forms" with technology. If you have any requests for samples, such as for unmanned transport carts, please contact us. 【Specifications】 ■Material: Resin, Urethane, Thermosetting Resin ■Lot: 1 to 1,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

At Tada Plastic Industry, we accept molding with ultra-high precision (dimensional tolerance of 0.005mm, accuracy in micrometers). We are capable of dimensional management from micrometer to 0.1 micrometer levels. The materials used include resins, as well as super engineering plastics and engineering plastics, with production lots ranging from 1,000 to 100,000 pieces, and precision below 1/1000mm. 【Molded Products (Partial)】 ■ Lenses ■ Lens Holders ■ OCV (Oil Control Valve) ■ Rings ■ Insulators *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

At Tada Plastic Industry, we handle "camera parts" made through precision injection molding. The dimensional tolerance is 0.005mm (up to 0.1 microns), with an accuracy of less than 1/1000mm. The lot size ranges from 1,000 to 100,000 pieces, and we use materials including super engineering plastics, engineering plastics, and general-purpose plastics. Please feel free to contact us when you need our services. 【Camera Module Parts Lineup (Excerpt)】 ■ Module Cover ■ Module Base ■ Lens Holder ■ Optical Pickup Parts ■ Bobbin *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

This is a proposal for a Φ0.05mm fine hole in the optical component "Relay/Relay Case" (injection molding). The materials used are resin, engineering plastics, and general-purpose plastics, with a lot size of 10,000 to 100,000 pieces. The precision is between 1/100 to 1/1000mm. Tada Plastic Industry will turn your ideas into "form" with technology. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot size: 10,000 to 100,000 pieces ■ Precision: 1/100 to 1/1000mm *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

There are various advantages to resinification (metal substitution). The notable effects compared to metals include being lightweight and durable, water-resistant, rust-proof, having high freedom of shape and coloring, and excellent design properties. Additionally, when compared to aluminum die-casting molds, it excels in durability and meets market needs such as cost reduction, weight reduction, and situations where metals cannot be used. 【Features】 ■ Lightweight: Light and durable ■ Insulation: Excellent electrical and thermal insulation ■ Chemical resistance: Water-resistant and rust-proof ■ Design: High freedom of shape and coloring, excellent design properties ■ Workability: Excellent workability (no post-processing required) ■ Mold durability: Superior durability compared to aluminum die-casting molds ■ Market needs: Cost reduction, weight reduction, and situations where metals cannot be used *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Processing Contract

At Tada Plastic Industry, we create molds using precise design and machining techniques. Since it is a resin, coloring is relatively easy, leading to cost reduction. We conduct flow analysis to satisfy the requirements for warping and flatness, and to estimate weld positions, shrinkage, and voids. Additionally, in engineering plastic molding, it is necessary to maintain a higher mold temperature compared to general-purpose resins. Therefore, we use pressurized hot water temperature control (150°C) instead of adopting heater specifications to keep the mold temperature uniform. **Benefits of Metal Replacement (Resinization)** - Weight reduction - Cost reduction - Increased design flexibility - CO2 reduction *For more details, please refer to the PDF document or feel free to contact us.*

• Contract manufacturing
• Processing Contract