寺田 Product Lineup

■Purpose: Stain protection coating for clothing, seats, etc. ■Application method: Dipping, spraying, etc. ■Drying time: [Air drying] 24 hours at 25°C or higher, 48 hours at 15-24°C [Heat drying] 30 minutes at 80°C or higher (maximum 170°C, dry immediately after application) or 10 minutes at 80°C after 2 hours of drying at room temperature (above 10°C)

• Coating Agent

At Terada Co., Ltd., we handle the polyester adhesive tape 'YT-153S'. We also have the separator-equipped YT-153SL available. It can be used for plating masking, painting masking, and as carrier tape. The color is green. Please check the photo. 【Specifications (excerpt)】 ■ Base material type: Polyester ■ Adhesive type: Silicone-based ■ Base material thickness (μm): 50 ■ Total tape thickness (μm): 90 ■ Adhesive strength N/25mm (gf/25mm): 12.74 (1,300) ■ Separator: Fluorine-coated PET (color: transparent) *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• paint
• Other electronic parts

Introducing Jinzhou Precision Industry, headquartered in Shenzhen, China, which boasts the world's top market share in drill and router bits for printed circuit board hole processing. This catalog features router bits from Jinzhou Precision Industry Co., Ltd. We use tungsten alloy round bars from a leading Japanese hard alloy manufacturer and produce our products in a factory equipped with the latest automated facilities in Shenzhen. [Contents (excerpt)] ■ Drills for printed circuit board processing ■ Router bits for printed circuit board processing ■ Newly developed products for the above two items ■ Cutting parameter calculation formulas *For more details, please refer to the PDF materials or feel free to contact us.

• Printed Circuit Board
• drill
• End Mills

Introducing Jinzhou Precision Technology Co., Ltd., headquartered in Shenzhen, China, which boasts the world's top market share in drills and router bits for printed circuit board processing. This catalog contains product information from Jinzhou Precision Technology Co., Ltd. We use tungsten round bars from top Japanese manufacturers as materials and produce them in our factory equipped with the latest automated facilities in Shenzhen. We also offer special types with in-house coatings. (Please inquire separately as these are not listed in the catalog.) 【Contents (Excerpt)】 ■ Drills for printed circuit board processing ■ Router bits for printed circuit board processing ■ Coated products ■ Newly developed products of the above two items (2024 latest version) ■ Cutting parameter calculation formulas *For more details, please refer to the PDF document or feel free to contact us.

• drill

This is a coating agent that dissolves non-fluorinated resin in a fluorinated solvent. This allows it to have the drying properties of fluorine while overcoming the disadvantages of fluorine coatings. ■ Applications: Electronic substrates, LEDs, etc. ■ Application methods: DIP, dispenser, etc. ■ Drying time: DIP touch dry in 2 minutes, fully dry in 1 hour ■ Film thickness: Dip 20μm (8wt% concentration) ■ Solid content concentration can be adjusted according to customer requests ■ Option to choose the presence or absence of fluorescent agents 2025.2.25 Renewed from old product number TRA-191216 to TRA-310.

• Coating Agent
• Rust Inhibitor
• Printed Circuit Board

The TERAELL series TRA-311 is our high-performance fluororesin. The solid content concentration can be adjusted according to customer requirements. Recommended substrates: Glass, metal (separate primer available for plastic and some metals) Recommended application methods: Spin coating, DIP, coater Available sizes: 1kg, 15kg 【Features】 ■ Development product ■ Low global warming potential, free of PFOA and PFHx substances ■ Repels water, oil, and alcohol-based organic solvents ■ Excellent stain removal properties (for anti-fouling applications) ■ Reusable (for release applications) *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

At Terada Co., Ltd., we handle the surface protection tape 'CM Series'. The various types of surface protection tape include those for masking in the solder leveling process of printed circuit boards, as well as for protecting surfaces during the transportation and processing of various materials. They can accommodate various surface conditions. There are also low-tack and weak-tack types available. 【Features】 ■ Production location: Taiwan ■ Heat resistance temperature: 250℃ ■ Can accommodate various surface conditions ■ Low-tack and weak-tack types are also available ■ Adhesive type is silicone-based *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• Other consumables
• Printed Circuit Board

The product "S-2115/TH-GC012" is a glass cloth with a thickness of 0.14mm coated with a heat-resistant and chemical-resistant silicone adhesive, resulting in a total thickness of 0.19mm for the glass cloth adhesive tape. The combination of glass fiber and silicone adhesive allows for heat resistance without any change in physical properties. 【Features】 ■ Total thickness is 0.19mm ■ Heat resistance without change in physical properties ■ UL certified (UL510FR, UL temperature rating: 200℃) ■ Effective insulation and heat resistance ■ Coated with heat-resistant and chemical-resistant silicone adhesive on 0.14mm thick glass cloth *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• Inductor Coil
• transformer

"Polyester adhesive tape" is a heat-resistant tape made from a polyester film base coated with a silicone-based adhesive. There is also a type that comes pre-laminated with a separator. It can be used for masking during plating/coating, powder coating masking, and aluminum substrate back laminating. 【Features】 - Based on polyester film - Coated with silicone-based adhesive - Excellent heat resistance - A type with pre-laminated separator is also available *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• paint
• Other electronic parts

"Polyimide adhesive tape" is made by coating an adhesive onto polyimide film. It can withstand extreme low temperatures of -269°C and high temperatures of up to 400°C for short periods, with those coated with silicone-based adhesives usable at heat resistance class 200 (200°C) or heat resistance class H (180°C). The film is flame-retardant and has passed "UL Subject 94V-0". 【Features】 ■ Coated adhesive on polyimide film ■ Excellent heat and cold resistance ■ Flame retardant ■ Excellent electrical, mechanical, and chemical properties ■ Excellent re-peelability *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• Other consumables
• Other electronic parts

We handle a variety of industrial adhesive tapes and films. Starting with the excellent heat and cold resistance "polyimide adhesive tape," we offer a wide range of products including "polyester adhesive tape," which comes in many types, and "glass cloth adhesive tape," which combines effective insulation and heat resistance, among many others. We also have products that are in the planning stage for import. 【Product Lineup (Excerpt)】 ■ Polyimide adhesive tape ■ Double-sided tape ■ Polyester adhesive tape ■ Glass cloth adhesive tape ■ Surface protection tape As of August 15, 2024, the catalog has been updated. - Added PVC tape VP3WHA and glass cloth adhesive tape H-2715. - Changed separator YT-75FR to YT-75FR(K). - Added tape roll lengths. - Removed some part numbers and corrected typos. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

We handle "Silicone Adhesive Masking Tape." Starting with "Polyester Film Adhesive Tape," which is based on polyester film, we also offer "Polyimide Film Adhesive Tape," based on polyimide film, and "Crepe Paper Masking Tape," which is made by laminating crepe paper and polyester film. Cutting processing is done domestically in Japan. 【Recommended for those with the following concerns】 ■ Is there a masking tape that is inexpensive yet high quality? ■ Is there a masking tape that sticks well and can be removed easily? ***We are currently offering free tape samples (100mm x 50mm) to the first 10 applicants. If you need one, please contact us using the information below♪*** *For more details, please refer to the PDF document or feel free to contact us.*

• Adhesive tape
• Other electronic parts

This is a high-performance epoxy and acrylic resin compound that brings together our company's technology, including adhesive technology for high-performance resins, know-how in manufacturing, and unique synthesis techniques for compound design. We respond to diverse needs, not only with conventional epoxy resins but also with a variety of functional products such as high thermal conductivity, high heat resistance, and flexibility, as well as environmentally friendly resins and new UV-curable resins (acrylic-based). 【Features】 ■ Infinite applications for sealing, molding, and bonding of electrical and electronic components ■ Compound design ■ Technology cultivated in the electronic device industry ■ Responding to various needs ■ Customization according to your requests ■ Made-to-order production in small quantities (minimum around 1kg) 【Product Lineup】 ■ High thermal conductivity resin (up to 6.5W/m·K) ■ High heat resistance resin (up to 300℃) ■ General-purpose potting resin ■ Transparent resin ■ Flexible resin ■ Adhesives (one-component heat curing, two-component room temperature curing, anaerobic) ■ UV-curable resin ■ Functional resins (low specific gravity, fast curing, low chlorine, flame retardant) *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

Scott Bader's "CRESTABOND" is a structural adhesive based on MMA (methacrylate) that does not require a primer. It optimizes production cycles and reduces manufacturing costs, providing flexibility in structural design. Additionally, it significantly improves production efficiency and contributes to reducing running costs. 【Features】 ■ No primer required ■ Minimal surface treatment ■ Excellent fatigue and impact resistance ■ Wide working and mixing times ■ Superior gap-filling performance ■ Adhesion of dissimilar materials *For more details, please refer to the PDF document or feel free to contact us.

• glue
• plastic

This product is a general-purpose potting and casting resin used in applications such as automotive fan motors. It is a two-component epoxy resin that achieves high crack resistance with a high filler loading in a non-flammable resin. Additionally, we offer a lineup of environmentally friendly flame-retardant resins. 【Features】 ■ Two-component epoxy resin ■ High crack resistance achieved with high filler loading in a non-flammable resin ■ Lineup of environmentally friendly flame-retardant resins ■ Practical strength obtained with curing conditions of 100°C for 2 hours *For more details, please download the PDF or feel free to contact us.

• Plastic utensils and containers
• Other polymer materials