トシコ Product Lineup

In the manufacturing stages of adhesive tapes, adhesives, and rubber products, oils and water have been used to prevent the adhesion of adhesives to the base material and to improve work efficiency. However, this has caused issues in subsequent processes, making it difficult to improve manufacturing efficiency and reduce the rate of defective products. The "Toshical® S Coating" is a non-adhesive surface modification process that creates a dramatically non-adhesive surface by creating unevenness on surfaces that repel adhesion and embedding a special resin into the recesses while leaving the uneven shape intact. As a result, we have succeeded in automation and reducing defects. Please feel free to contact us if you have any inquiries. 【Features】 ■ Modifies to a non-adhesive surface without changing the characteristics of the base material ■ Prevents issues caused by the adhesion of strongly adhesive substances to the base material ■ Provides solutions for "automation and efficiency of work" and "reduction of defect occurrence rate" *For more details, please download the PDF or feel free to contact us.

The "Toshical S TS-1400 Coating" retains the advantages of the conventional TS-1000 coating while demonstrating excellent non-stick properties and durability, ensuring dimensional sugar content. It complies with the RoHS directive and REACH regulations, taking into consideration the global environment. Due to its conductive processing, it does not cause electrostatic interference. The Toshical coating series includes various grades in addition to the above. For more details, please contact us. 【Features】 ■ Exhibits outstanding non-stick properties against unvulcanized rubber ■ Does not cause electrostatic interference due to its conductive processing ■ Complies with RoHS directive and REACH regulations, considering the global environment ■ Ensures dimensional sugar content while demonstrating excellent non-stick properties and durability ■ Thickness ranges from 10 to 50 μm, and surface roughness is finished to approximately Ra 2.0 to 5.0 μm *For more information, please refer to the PDF document or feel free to contact us.

The "Toshical S TS-1310 Coating" is a type that significantly improves dimensional accuracy while maintaining the non-stick properties that are the strengths of the conventional TS-1000 coating. It exhibits superior non-stick properties against uncured rubber. The film thickness is less than 10μm, and the surface roughness is finished to approximately Rz10μm. It can be safely used in the manufacturing fields of electronic components such as semiconductors and liquid crystals, with consideration for the global environment. 【Features】 ■ Exhibits superior non-stick properties against uncured rubber ■ Does not cause static electricity issues due to conductive processing ■ Complies with RoHS directives and PEACH regulations with consideration for the global environment ■ Significantly improves dimensional accuracy ■ Film thickness is less than 10μm, and surface roughness is finished to approximately Rz10μm *For more details, please refer to the PDF materials or feel free to contact us.

With the "Tosical® S Coating" for seal bars and heat cutters, we easily solve challenges. The issue of foreign substances adhering to seal bars and transferring to products, causing appearance defects, is addressed by preventing adhesion through coating, thereby improving product quality. Additionally, the problem of resin from cutting adhering to the cutter, which requires stopping the production line for removal, is made easier with the removal and cleaning of adhered substances, reducing the burden of maintenance work. 【Features】 ■ Prevents adhesion through coating ■ Eliminates the need for tape ■ Makes removal and cleaning of adhered substances easy *For more details, please download the PDF or feel free to contact us.

The "Toshical(R) S Coating" exhibits excellent non-stick properties against adhesives such as adhesive tapes and glues on the surface of the substrate. It does not stick at all to cellophane tape, cloth adhesive tape, label seals, hot melt adhesives, unvulcanized rubber, and more. 【Features】 ■ Exhibits excellent non-stick properties against adhesives ■ With conductive processing, it does not cause static electricity issues ■ Environmentally friendly, free from PFOS and PFOA, and complies with RoHS directives and REACH regulations *For more details, please download the PDF or feel free to contact us.

The "Toshikaru(R) S Coating" is free of PFOA and PFOS, so you can use it with peace of mind. It achieves superior non-stick properties compared to fluoropolymer coatings. Nothing sticks at all. If you would like to place an order, please feel free to contact us. 【Features】 ■ Safe to use as it is free of PFOA and PFOS ■ Achieves superior non-stick properties compared to fluoropolymer coatings *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case study on the introduction of "Toshical S TS-1310" to a seismic (anti-tipping) mat manufacturer. In the manufacturing process of seismic mats, a gel-like adhesive (main component: polyurethane elastomer) is punched into the shape of the product (round or square). At this time, the punched products would stick to the surface of the punching blade, making it difficult to remove the punched products. After adopting our product on the surface of the blade, the adhesion of the adhesive material was eliminated, significantly contributing to improved productivity. 【Overview】 ■ Customer: Seismic (anti-tipping) mat manufacturer ■ Target: Cutting process ■ Implementation: Toshical S TS-1310 *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case study of the implementation of "Toshical S TS-1800/UNA-1200" for an industrial machinery manufacturer. In the adhesive tape application device, when tape is applied to the workpiece and then cut, the tape tends to stick to the guide components that hold the tape down and to the cutter. When the tape sticks, it becomes impossible to cut or feed the tape. After adopting "TS-1800" for the guide components and "UNA-1200" for the cutter, the adhesion of adhesive materials was eliminated, significantly contributing to increased productivity. [Overview] ■ Customer: Industrial machinery manufacturer ■ Target: Tape application process ■ Implementation - Toshical S TS-1800 (guide component) - Toshical S UNA-1200 (cutter) *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case study on the implementation of "Toshical S TS-1000" for rubber product manufacturers. By applying our product's coating to the surface of scissors, it prevents the adhesion of unvulcanized rubber. This allows for the cutting of sticky materials, such as unvulcanized rubber sheets, significantly contributing to improved work efficiency. 【Overview】 ■Customer: Rubber product manufacturer ■Target: Rubber sheet manufacturing process ■Application: Toshical S TS-1000 *For more details, please download the PDF or feel free to contact us.

The "Toshical S UNA-1200 Coating" provides excellent non-stick properties against adhesives such as labels, stickers, adhesive tapes, uncured rubber, and adhesives on the surface of the processed substrate. Compared to the conventional "Toshical S Coating Series," it exerts less stress on the processed substrate during the processing stages, demonstrating extremely minimal dimensional changes before and after processing. Additionally, it is PFOS and PFOA free and complies with the ROHS directive and REACH regulations. It is a safe treatment that takes the global environment into consideration. 【Features】 ■ Consideration for the counterpart material ■ Consideration for the processed substrate ■ Consideration for the global environment *For more details, please download the PDF or feel free to contact us.