AIP Product Lineup

A device that merges 'environmental consideration' and 'cost reduction' by reducing electricity costs and carbon dioxide emissions from air conditioning and refrigeration systems! The 'Eco Pulsar e3' is an energy-saving signal generator that significantly improves the heat exchange rate of air conditioning and refrigeration systems. By applying an electrical signal (eco pulse), it weakens intermolecular forces, restoring refrigeration oil to its pre-degradation state, thereby achieving reductions in power consumption and CO2 emissions. Additionally, all that is needed is an AC100V power supply. Simply connect the signal line supplied from this product to the refrigerant piping, with no piping work required. 【Features】 ■ Approximately 15-20% reduction in power consumption ■ Achieves energy savings without modifying existing equipment ■ Reduces the load on air conditioning and refrigeration equipment ■ Contributes to CO2 reduction *For more details, please download the PDF or feel free to contact us.

The "Eco Pulsar Triple E" focuses on the performance degradation of refrigerant oil due to aging (increased viscosity) and reduces power consumption by restoring the fluidity of the refrigerant with an electrical signal. It can be used simply by connecting it to an AC100V power supply and attaching the signal line to the existing air conditioning or refrigeration system's refrigerant piping. By enhancing the fluidity of the refrigerant and the heat exchange efficiency, it reduces the operating time of the compressor, and in inverter-controlled air conditioning systems, it also contributes to lowering the compressor's rotation speed. 【Features】 - Approximately 15-20% reduction in power consumption - Effectiveness observed about two weeks after installation - Achieves low-cost energy savings without modifications to existing equipment - Helps reduce the load on the compressor, contributing to the longevity of the equipment *One Eco Pulsar can connect to a maximum of six units (compressors) with limitations on the amount of refrigerant gas enclosed. *For more details, please refer to the materials available by clicking "Download Catalog." We also support "Reduction Rate Confirmation Tests" for temporary installations and comparison of actual measurement data.

"Visualizing electricity" for thorough management of waste and costs! 《Features》 - Real-time monitoring of electricity usage by circuit and device - Remote monitoring and notifications via smartphone app - Display of energy-saving effects and electricity cost predictions - Can be retrofitted to existing equipment

Do you have any of these concerns? - Struggling with high electricity bills - Wanting to contribute to SDGs (CO2 reduction) - Finding daily temperature setting tasks difficult - Unable to concentrate on work due to excessive heat - Noticing malfunctions too late - Forgetting to turn things off... We will solve these issues with the power of IoT, without relying on human hands!

Do you have any of these concerns about your air conditioning equipment? - I want to reduce running costs without compromising comfort. - I want to make my existing equipment (both new and old) more energy-efficient. - I cannot stop it as it operates continuously 24 hours a day. - Rising electricity costs are squeezing profits, etc. An air conditioning energy-saving planner with extensive on-site experience will carefully support you from energy-saving diagnostics of your air conditioning equipment to proposing optimal operating conditions. Let's work together to identify waste and optimize energy! ＼ Free simple diagnosis currently available ／ Why not check for "waste" with a free diagnosis first? *For more details, please view the PDF data by clicking "Download Catalog" or feel free to contact us.

In the operation of air conditioning units in offices, factories, and stores, have you made the judgment that "choosing a large unit with excess capacity is safe"? However, the capacity of the compressor, which is the heart of the air conditioning unit, is not simply better if it is larger. Selecting the optimal capacity for the actual air conditioning load on-site is the key point to reducing electricity costs and ensuring the long-term stable operation of the air conditioning unit.

When conducting an energy-saving diagnosis of air conditioning units, treating the manufacturer's "rated values" and the "measured values" obtained on-site as the same will lead to inaccurate evaluations. These figures have distinctly different meanings and roles. This time, we will explain the organization of indicators to help on-site facility managers correctly interpret the data and implement appropriate energy-saving measures. 1. Understand the roles of the three values The key figures to be grasped in managing air conditioning units are mainly the following three types: Rated Value (Standard Value) This is the standard value set by the manufacturer under typical conditions. It serves as the baseline for comparing equipment and calculating "load rates." It is important to note that this value is merely a guideline and differs from the values during normal operation. Maximum Value (Peak Value) This is the highest value recorded during operation. It is used to check the peak load that occurs momentarily and to assess how much capacity the equipment has (whether there is any overload). Measured Value (On-site Data) This is the actual data measured on-site using devices such as current loggers. It fluctuates constantly due to external temperature, time of day, and usage environment, making it the "central data" for energy-saving evaluations and comparisons before and after implementation.

The hot spring facilities have environments where the air conditioning load varies significantly by area, including the bathing area, changing rooms, relaxation areas, dining areas, and the front desk. Additionally, the overlapping factors of "humidity and steam effects," "long operating hours," and "high demands for comfort" lead to a situation where on-site staff frequently make adjustments, resulting in operations becoming dependent on individuals. This time, we will organize the points necessary to "visualize" this complex air conditioning management and achieve energy savings. 1. Five Areas Where "Problems" Are Likely to Occur in Hot Spring Facilities Each area has its own unique challenges, making it difficult to balance comfort and energy savings with a uniform operation. Changing Room: This area has a very large difference in humidity and perceived temperature. Bathing Area Entrance: Steam easily flows in constantly, affecting the air conditioning load. Relaxation Space: This is one of the places with the highest demands for customer comfort. Dining Area: Heat from the kitchen and load fluctuations due to congestion cannot be ignored. Front Desk: This area is easily affected by outside air due to the opening and closing of entrances.

When conducting energy-saving diagnostics for air conditioning units and other equipment, are you confusing the "power meter" present on-site with the "current logger" commonly used in diagnostics? Understanding the purpose and location of measurements correctly is essential for accurately calculating energy-saving effects. In this article, we will clarify the differences in the roles of both devices and explain the basic knowledge needed to correctly interpret data on-site. 1. Where is the power meter located and what does it measure? The power meter is installed at the "receiving point" where electricity enters the building from the power company, and it counts the "active energy (kWh)" used by the entire building. What it measures: The actual amount of energy consumed as work, calculated as "active power (kW) × time (h)." Reflection: It serves as the basis for electricity billing, representing the total value for the entire building.

When evaluating the energy-saving performance of air conditioning units, the "rated values" published by manufacturers are an essential standard. However, rated values are merely guidelines under standard conditions and can vary significantly from actual operating conditions. This time, we will clarify the differences in the roles of "rated current value (A)" and "rated power consumption (kW)," which are frequently used in energy-saving measurements, and explain how to utilize them in the field. 1. Role of "rated current value (A)": Visualizing the load on the air conditioning unit The rated current value is an estimate of the current that flows when the air conditioning unit operates under standard conditions. Main use: It is used as a reference value to calculate the "operating load" on the equipment. How to use: By dividing the measured average current value by the rated current value, you can calculate the "current load ratio." Calculation formula: Current load ratio = (Measured average current value ÷ Rated current value) × 100 Note: In the case of inverter units, the current value fluctuates during actual operation, so comparing it with measured data is important.

In office buildings, managing air conditioning systems is a crucial issue directly linked to management costs. However, complex factors such as large floor areas, diverse usage departments, a mix of old and new equipment, and demand management intertwine, hindering ideal operations. This time, we will organize the challenges frequently encountered in large office buildings and explain the "three pillars" for achieving both comfort and energy savings. 1. Ten Challenges Unique to Large Buildings The difficulties of management in large buildings can be summarized mainly by the following factors: Spatial and Environmental Factors: "Temperature variations" between window areas and the center, "discrepancies in comfortable temperatures" among departments, and "efficiency decline" due to the heat dissipation environment around outdoor units. Operational and Human Factors: "Variability in set temperatures" at the site level, "forgetting to turn off" conference rooms, and the "lack of visibility" regarding operational conditions that prevents managers from grasping the overall situation. Equipment and Cost Factors: "Power peaks" at the start of operations, "mixing of old and new equipment" due to renovations, "variability in efficiency" due to differences in maintenance conditions, and the "trade-off between demand control and comfort." The accumulation of these numerous challenges can easily lead managers to a state of "not knowing where to start."

In nursing facilities, air conditioning management goes beyond mere equipment operation; it is an extremely important task directly linked to the health maintenance of residents. However, the reality is that the management becomes very difficult due to overlapping challenges such as different usage patterns in various locations, differences in perceived temperature among individuals, and the hurdle of 24-hour operation. This time, we will organize common issues faced by nursing facilities and explain hints for efficient operation. 1. Five Main Factors Troubling the Field In nursing facilities, the following factors intertwine and increase the difficulty of air conditioning management: - The perceived temperature varies among the elderly, staff, and visitors, leading to differing feelings of comfort even at the same room temperature. - Depending on the characteristics of the location, such as private rooms, dining areas, hallways, and bathrooms, hot and cold spots are likely to occur. - In residential facilities, operations close to 24 hours a day are common, which inevitably leads to high electricity costs. - To respond to complaints of "hot" or "cold," staff members have to operate the remote control each time, creating additional work. - Even if electricity costs are high, it is difficult to understand which air conditioning units are operating at what times and how they are generating waste.

The facility's electricity charges are determined by the sum of the "basic charge (based on maximum demand)" and the "energy charge (based on the amount of electricity used)." The "demand control" implemented in many sites is effective for peak cutting, but it does not alone complete energy savings for air conditioning. 1. The decisive difference between demand control and air conditioning energy savings The key to successfully combining them is to clearly distinguish their respective "roles." 【Role of Demand Control】 Purpose: To suppress maximum power (peak). Main effect: Specifically focused on addressing basic charges. Operational image: Temporarily suppressing capacity only during peak times. Caution: Since it is controlled forcibly, there is a risk of compromising comfort. 【Role of Air Conditioning Energy Savings (Daily Measures)】 Purpose: To reduce the amount of electricity used (kWh). Main effect: Contributes to the reduction of energy charges. Operational image: Continuously reducing waste in daily operations. Caution: A comparative evaluation is necessary to confirm the effects after measures are implemented.

More facilities are introducing "demand control (peak cut)" as a measure to reduce basic electricity charges. However, demand control is fundamentally a "method to suppress power peaks" and should be considered separately from energy-saving measures that enhance the inherent efficiency of air conditioning units. In this article, we will explain the mechanism of demand control in air conditioning systems and the disadvantages to be aware of in practical operations. 1. Mechanism and Process of Air Conditioning Demand Control Demand control in air conditioning systems suppresses peak power through the following processes: 1. Detecting the rise in power peaks. 2. Activating demand control. 3. Temporarily forcing a reduction in cooling capacity. By suppressing the peak power value (kW) through this control, it is very effective as a measure against basic charges.

From a social perspective, we will clearly introduce the role, evaluation, approach, and menu of AIP.

To operate the air conditioning unit stably and maintain energy efficiency, regular inspections by professionals are essential. However, even more important is the "daily maintenance" performed by the on-site users. Basic care, such as ensuring proper airflow and preventing heat escape, dramatically reduces the risk of failure and serves as the greatest barrier to rising electricity costs. 1. "Basic Maintenance" that Users Should Perform Thoroughly implementing the following two points is the quickest route to keeping the air conditioning unit healthy. Filter Cleaning: To ensure sufficient airflow and prevent a decrease in heat exchange efficiency, cleaning every 2 weeks to 1 month is recommended. Checking Around the Outdoor Unit: To avoid obstructing heat dissipation and absorption, do not place objects in front, behind, or on the sides, and ensure that leaves, trash, and snow do not accumulate. 2. Signs of Abnormalities Not to Be Overlooked During daily checks, please monitor the following points. Intake and Outlet: Ensure they are not blocked by furniture or curtains. Operating Condition: Check for any unusual noises or smells, and ensure there are no water leaks. Display and Settings: Look for error messages, and ensure that unreasonable temperature settings or unnecessary prolonged operation are not occurring.

Most of the power consumption of air conditioning units (air conditioners) is due to the operation of the compressor, which circulates the refrigerant. When excessive strain is placed on this compressor, not only does the electricity bill increase, but it also accelerates the deterioration of the entire system and can lead to serious malfunctions. In this article, we will explain the nature of the load on the compressor and the risks that arise from it from a technical perspective. 1. Mechanism of Increased Load on the Compressor The compressor performs the "work" of moving the refrigerant. A state where this work becomes heavier, or "increased load on the compressor," refers to situations such as the following: Increase in current value: Excessive power is required for the load. Prolonged operating time: The operating time extends until the set temperature is reached. High-pressure, high-temperature operation: The pressure and temperature inside the equipment approach design limits. A familiar example would be a car running on a flat road, which is in a "steady operation and relatively stable" state, compared to a car that is struggling to climb a slope, which represents a "high load and long-duration operation." If the latter type of operation continues, just like the vehicle, the air conditioning unit will also experience significant strain.

In selecting air conditioning equipment, the idea that simply increasing the "capacity" on the catalog specifications ensures reliability, or that selecting a smaller capacity leads to energy savings, is a significant misconception. Air conditioning units have a "rated operating range" (approximately 80-100%) where they can achieve the highest energy efficiency. This time, I will explain from a technical perspective the impacts that arise when the capacity selection is inappropriate for the actual air conditioning load. 1. The impact of "excess or insufficient" air conditioning capacity on efficiency Understanding the heating and cooling load for each space is essential for selecting the capacity of the air conditioning unit. In the case of insufficient capacity (selecting a model below the rated capacity): The unit will always operate at full capacity (100%), making it difficult to reach the target temperature and likely increasing power consumption. This leads to decreased efficiency and higher electricity costs. In the case of excessive capacity (selecting a model that is larger than necessary): The unit will continue to operate at low load (approximately 50-70%). Depending on the model, there is a risk of decreased efficiency or frequent ON/OFF cycling. In the case of appropriate capacity (selecting a model that fits the load): The unit can maintain operation near the rated capacity (80-100%), resulting in the highest efficiency and excellent energy-saving performance.

When selecting an air conditioning unit, it is not uncommon for people to misunderstand the values listed in the catalog, such as "8.0kW" or "9.0kW," thinking they refer to "power consumption (electricity costs)." However, this unit actually indicates the "capacity to move heat." To ensure proper energy-saving operation, it is essential to accurately understand this definition of capacity. 1. The roles of "cooling capacity" and "heating capacity" The capacity of an air conditioning unit refers to the magnitude of its ability to transfer heat indoors. Cooling capacity: The ability to expel heat from indoors and cool the room. Heating capacity: The ability to take in heat from outside and warm the indoors.

Air conditioning units are inherently efficient systems that can deliver 3 to 5 times the heating and cooling capacity for every unit of electrical energy used. So why do electricity costs often appear high? The reasons mainly lie in the "size of the load" and the "operating conditions." Long operating hours: During seasons when heating or cooling is necessary, such as summer or winter, the operating time inevitably becomes longer. Large spaces: Cooling or heating large areas increases electricity consumption. Outdoor environment and load: The harsher the outdoor conditions, such as in midsummer or midwinter, the greater the load on the air conditioning unit. Temperature difference load: The larger the difference between the set temperature and the room temperature, the more work the compressor has to do. Impact of building environment: Building conditions, such as insulation performance and the frequency of people entering and exiting, affect the air conditioning load. Dirt and aging of equipment: Dirty filters and aging equipment significantly reduce the overall efficiency of the system.

Air conditioning units (air conditioners) are often thought of simply as "machines that cool the air," but their essence lies in controlling the process of heat transfer, which involves "carrying heat from indoors to the outside and bringing heat from the outside into the room." In this article, we will explain how air conditioning units regulate temperature and humidity, along with their basic structure and mechanisms. 1. Main Components of Air Conditioning Units Air conditioning units are primarily composed of the following three elements, which work together to adjust the environment: Indoor unit: It draws in warm air (heat) from indoors and blows out cold air (cool breeze) into the room. Outdoor unit: It is responsible for releasing the heat brought from indoors to the outside. Refrigerant piping: This is the pipe that connects the indoor and outdoor units, through which a substance called "refrigerant," which carries heat, circulates.

When checking whether the air conditioning equipment is performing at its original capacity or where energy waste is occurring, the use of thermography is very effective. By visualizing thermal conditions that cannot be confirmed by the naked eye, such as "whether the correct airflow is coming from the indoor unit's outlet" and "whether the outdoor unit's heat discharge is obstructed," we can quickly identify hints for air conditioning malfunctions or energy-saving improvements. 1. Four Key Points Identifiable with Thermographic Images By using thermography, the following items can be objectively understood as image data: - Indoor temperature variations: Visually grasp heat accumulation near the ceiling, thermal loads by windows, and areas where heating and cooling air has difficulty reaching. - Condition of the indoor unit's airflow: Inspect the bias of cold and warm air and the condition of the intake. - Heat discharge around the outdoor unit: Identify heat accumulation, short circuits, and the influence of surrounding heat sources. - Compressor and piping: Check the temperature trends of the compressor itself, discharge and suction piping, and insulation conditions.

The failure of commercial air conditioning units can lead to business interruptions and a decrease in comfort, directly impacting management costs. When requesting repairs in an emergency, one aspect that is often overlooked is the scope and content of the "manufacturer's warranty." To prevent issues such as "I thought I had a warranty, but it was not covered," we will outline the basic rules regarding warranties for commercial air conditioning. 1. The Mechanism of Manufacturer's Warranty and the Reality of "Standard 1 Year" A manufacturer's warranty is a system where the manufacturer repairs product defects that occur under normal usage conditions free of charge for a certain period. For commercial air conditioning units, this standard warranty period is generally "1 year." However, the warranty content can vary significantly depending on the manufacturer, model, and sales conditions. In some cases, depending on the installation method, there may be extended warranties or separate maintenance contracts included. It is essential to check the warranty certificate or contract details you have on hand to understand the actual warranty coverage.

When an air conditioning unit malfunctions, while it may be clear "where it broke," identifying "why it broke (the root cause)" is difficult. In response to the concern of "even after repairs, it recurs," we will explain the structural reasons that make it hard to determine the cause and the countermeasures. 1. Five reasons why it is difficult to determine the cause of failure Failures arise from multiple, rather than single, factors. A. Overlapping multiple factors: Issues such as dirt, aging deterioration, and overload combine to lead to failure. B. Lack of records: There is insufficient operational history data, such as current values and pressure, before and after the failure. C. Limitations of error codes: Codes only indicate "what happened," and do not specify the cause. D. Differences in environmental stress: Factors like oil smoke, salt damage, and prolonged operation vary the burden on the equipment depending on the usage environment. E. On-site priority for recovery: On-site, "early recovery" is prioritized over identifying the cause, often delaying analysis.

Commercial air conditioning units are not just installed and forgotten. Administrators are required to conduct inspections and maintain records in accordance with laws and regulations, as well as to manage the units appropriately. These responsibilities are not only about compliance with the law but are also crucial for preventing breakdowns and promoting energy efficiency and longevity. 1. Inspection obligations required by the Fluorocarbon Emission Control Law For commercial refrigeration and air conditioning equipment that uses fluorocarbons, the following inspections are mandated by law: Simple inspections: Must be conducted at least once every three months. Regular inspections: Required for equipment above a certain size, depending on the rated output of the compressor. For units with a rated output of 7.5 kW to less than 50 kW: At least once every three years. For units with a rated output of 50 kW or more: At least once every year. *Regular inspections must be carried out by individuals with sufficient expertise.

Air conditioning systems, which account for 40-60% of a building's total electricity consumption, are the largest "treasure trove" in energy conservation. However, in many workplaces, improvements are postponed due to misconceptions such as "turning off the air conditioning will disrupt operations" and "I don't know where the waste is." Instead of viewing energy conservation as "sacrifice or restriction," approaching it as "operational improvement" based on data can lead to significant improvements in both costs and the environment. Finding waste hidden in the "norms" of the workplace The waste in air conditioning is hidden in the "norms" of daily operations. The first step to improvement is to objectively understand the current situation.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

I have summarized it clearly in the image. For more details, please refer to the posted image.

We will visualize the waste of air conditioning and confirm the potential for reduction. Energy-saving target: approximately 10-30% *Depending on conditions and measures, we will also evaluate potential reductions exceeding 30%. Please start by consulting us to understand the current situation. Simple estimation of reduction potential and consultation are free of charge.

We will clearly introduce the social significance of AIP's energy-saving air conditioning, including its role, evaluation, approach, and menu. The role of AIP is not just to sell energy-saving products, but to assess the on-site air conditioning situation and organize waste based on measurement data. While sharing the situation with customers, we combine energy-saving measures that are suitable for the site, taking cost-effectiveness into account. 【Roles of AIP】 ■ Visualize the state of air conditioning ■ Organize energy-saving potential ■ Combine measures suitable for the site based on cost-effectiveness ■ Evaluate effectiveness with actual measurement data ■ Progress together with customers *For more details, please download the PDF or feel free to contact us.

We would like to introduce the operating image of compressors and similar equipment. At 6.3kW, there is insufficient capacity, leading to almost continuous operation. At 11.2kW, the capacity may be excessive, resulting in low-load operation, which can decrease efficiency depending on the model. However, at the appropriate capacity, it can operate stably and efficiently. In the attached PDF document, we have included a comparative image for a space requiring a cooling capacity of 8.0kW, so please take a look. [Operation at 8.0kW (appropriate capacity)] - The load balance of the compressor is good. - It is easy to operate efficiently. - It is easier to achieve both comfort and energy savings. *For more details, please download the PDF or feel free to contact us.

In the hospital and clinic industry, maintaining a comfortable healing environment for patients and ensuring thorough hygiene management are essential. In particular, air conditioning is crucial for managing room temperature and humidity, and its stable operation directly impacts the quality of medical services. However, the aging of air conditioning equipment and inefficient operation can lead to unnecessary electricity costs and increase the risk of unexpected failures. Our free simple estimation service provides an immediate approximation of the potential electricity cost savings for your facility's air conditioning based on your electricity bill, helping to identify waste. 【Usage Scenarios】 - Reviewing electricity bills - Understanding the operational status of air conditioning equipment - Considering cost reduction 【Benefits of Implementation】 - Understanding the scale of annual electricity costs - Gaining insights into the proportion of air conditioning usage - Confirming the estimated potential for savings - Determining the need for detailed examination

At event venues, air conditioning is essential to maintain a comfortable space due to the large number of people gathering. However, there are many cases where the electricity costs are higher than expected. Particularly, depending on the scale of the event and the duration, the costs associated with air conditioning can put pressure on the overall operating expenses. Our free simple estimation service provides an immediate estimate of the potential savings on air conditioning electricity costs at event venues based on electricity bills. This allows for a quick understanding of cost-saving possibilities and provides decision-making material on whether to proceed with detailed considerations. 【Usage Scenarios】 - Large-scale event venues - Exhibition halls - Concert halls - Sports facilities 【Benefits of Implementation】 - Understanding potential savings on electricity costs - Providing materials for cost reduction considerations - Contributing to the optimization of operating expenses

Is lowering the air conditioning set temperature also lowering the outlet temperature? This is explained in detail with illustrations.

Is the rotation operation of stopping air conditioning units effective for energy saving? This is explained in detail with illustrations.