ペルノックス Product Lineup

ONE-HAND MIXING is a two-part conductive epoxy adhesive filled with silver filler. A dedicated cartridge and static mixer nozzle automatically mix the two components as you dispense. ○ No weighing, measuring or manual mixing is required, helping reduce variation in the mixing ratio between operators. ○ Because it cures at room temperature, it is suitable for electrical bonding around heat-sensitive plastic parts, FPCs, LEDs and sensors. ○ It enables conductive bonding without a soldering iron, even on materials that are difficult to solder, such as glass, plastics, aluminum and stainless steel. ○ After curing, it retains flexibility, making it useful for repair or bonding in areas subject to bending or vibration. * For detailed data, please refer to the TDS and special website.

In the automotive industry, various sensors are installed to enhance vehicle safety and comfort. To ensure the accurate operation and reliability of these sensors, secure fastening of components and conductive connections are crucial. Particularly, when connecting heat-sensitive components or materials that are difficult to solder, selecting the appropriate adhesive is essential. ONE-HAND MIXING addresses these challenges and enables easy and reliable conductive connections at room temperature. 【Application Scenarios】 - Fixing heat-sensitive sensor components - Conductive connections to resin housings - Repairing areas subject to vibration or impact - Conductive bonding to aluminum or SUS materials 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Minimization of mixing errors and variations by operators - Reduced risk of damage to components from heat - Improved capability to address areas where soldering is difficult - Durability against vibration and bending due to flexibility

In the electronics industry, ensuring reliable connectivity of fine circuits is essential in circuit board repair. Particularly, addressing components that are sensitive to heat and materials that are difficult to solder is crucial. Traditional methods often face challenges related to the impact of heat on components during soldering and material constraints. ONE-HAND MIXING offers a solution that enables connectivity without soldering at room temperature, addressing these issues. 【Usage Scenarios】 - Connectivity for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding for materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repair and connection in areas subjected to bending or vibration 【Benefits of Implementation】 - Simplification of work processes and reduction of variability in mixing ratios by operators - Decreased risk of damage to components from heat - Compatibility with a variety of materials for conductive connections

In the lighting industry, stable conductive connections for LEDs are directly linked to product quality and lifespan. Particularly, when connecting heat-sensitive LED components or surrounding substrates, soldering at high temperatures can be challenging. Additionally, precise adhesion work for fine components requires skilled techniques and uniform material supply. ONE-HAND MIXING addresses these challenges by providing automatic mixing and dispensing functions with dedicated cartridges and mixer nozzles, enabling reliable conductive connections at room temperature without the hassle of weighing and manual mixing. 【Application Scenes】 - Conductive adhesion of LED chips to substrates - Fixing heat-sensitive resin LED components - Conductive connections around sensors - Conductive adhesion to materials like glass and aluminum, where soldering is difficult 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Stabilization of quality by minimizing variations in mixing ratios by operators - Reduced risk of damage to components due to heat - Enabling conductive connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

In the field of medical devices, there is a demand for reliable conductivity performance in precise probe connections while minimizing the impact on delicate components. Particularly, connections to heat-sensitive materials or components with complex shapes can make soldering difficult. In response to such challenges, our "One-Hand Mixing Room Temperature Curing Conductive Adhesive" eliminates the need for measuring and mixing tasks, ensuring reliable conductive connections at room temperature. 【Usage Scenarios】 - Conductive connections at the tips or connector parts of medical probes - Conductive repairs around heat-sensitive sensors and electronic components - Formation of conductive paths on delicate resin housings 【Benefits of Implementation】 - Simplification of tasks and reduction of variability in mixing ratios by operators - Reduced risk of damage to components from heat - Enables conductive connections to materials that are difficult to solder - Improved durability against vibration and bending due to flexibility after curing

In the aerospace field, precise wiring fixation is required, and high reliability and work efficiency are emphasized. In particular, it is essential to address materials that are sensitive to heat and complex shapes, as well as to ensure rapid work on-site. Traditional methods have faced challenges such as difficulties in soldering and the labor-intensive nature of weighing and mixing tasks. ONE-HAND MIXING addresses these issues by eliminating the need for weighing and manual mixing through an automatic mixing and dispensing function using a dedicated cartridge and mixer nozzle, thereby reducing variability in mixing ratios by the operator. Due to its room temperature curing, it is also suitable for conductive connections around heat-sensitive components, enabling conductive bonding of materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. 【Application Scenarios】 - Precise wiring fixation inside and outside aircraft - Conductive connections around sensors and electronic components - Conductive bonding to heat-sensitive materials - Repair and connection of areas subjected to vibration or bending 【Benefits of Implementation】 - Reduction and efficiency of work time - Achieving conductive connections with uniform quality - Improved capability to address areas where soldering is difficult - Reduced impact on components due to heat

In maintenance settings, quick and reliable recovery is required when equipment failures or damage occur. Particularly in repairs where electrical continuity is necessary, challenges may arise when soldering is difficult or when dealing with heat-sensitive components. In such situations, a solution that can establish a conductive connection at room temperature without using a soldering iron is essential. ONE-HAND MIXING is a product that meets these urgent needs. 【Usage Scenarios】 - Emergency repairs of conductive parts in malfunctioning electronic devices - Wiring repairs around heat-sensitive components - Situations requiring rapid continuity assurance on-site - Conductive connections to materials that are difficult to solder (glass, resin, aluminum, SUS, etc.) 【Benefits of Implementation】 - Supports rapid recovery operations in emergencies - Enables conductive connections even in difficult soldering areas - Reduces damage to components caused by heat - Alleviates the burden on workers and improves work efficiency

In the field of robotics joint repair, precise conductive connections and durability are required. In particular, addressing components that are sensitive to heat, complex shapes, and improving work efficiency are emphasized. Traditional repair methods can face challenges such as difficulties in soldering and variations due to the skill level of the workers. ONE-HAND MIXING addresses these issues with an automatic mixing and dispensing function that can be easily handled with one hand, achieving uniform quality conductive connections at room temperature. 【Usage Scenarios】 - Wiring repair of robot joints - Conductive connections around sensors - Application of conductive patches to movable parts - Conductive bonding to aluminum and resin components 【Benefits of Implementation】 - Enables conductive connections in areas where soldering is difficult - Stable quality that does not depend on the skill of the worker - Reduces the impact on heat-sensitive components - Flexibility to accommodate vibrations and bending

In the telecommunications industry, precise adjustment of antennas and stable conductive connections are essential for maintaining communication quality. Particularly in the case of delicate components or on-site work, soldering can be challenging, and dealing with heat-sensitive materials presents difficulties. Improper connections can lead to communication failures or performance degradation. ONE-HAND MIXING allows for the automatic mixing and dispensing of two liquids using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for antenna components - Repair and maintenance of delicate communication equipment - Rapid conductive connection work on-site 【Benefits of Implementation】 - Enables conductive connections for materials that are difficult to solder - Applicable to heat-sensitive components - Improved work efficiency and stabilization of quality

In the energy industry, particularly in the connection of solar cells, stable conductivity performance and long-term reliability are required. There may be challenges in connecting materials that are sensitive to heat or accommodating complex shapes. Our product "ONE-HAND MIXING" addresses these challenges by enabling easy conductive connections at room temperature, even with materials that are difficult to solder, contributing to improved work efficiency and quality. 【Usage Scenarios】 - Wiring connections for solar panels - Conductive connections to flexible printed circuits (FPC) - Conductive repairs around sensors and LEDs 【Benefits of Implementation】 - No soldering required, making it applicable to heat-sensitive materials - Reduces variability in mixing ratios by operators, achieving stable quality - Compatible with a variety of materials such as glass, resin, aluminum, and stainless steel (SUS) for conductive bonding - Maintains flexibility after curing, allowing for strong connections that withstand vibration and bending

In the repair of circuits in home appliances, precise work and reliable continuity are required. In particular, addressing heat-sensitive electronic components and circuit boards, as well as reducing the burden on workers, are emphasized. Improper repairs can lead to product malfunction or reduced lifespan. ONE-HAND MIXING is a product designed to address these challenges, allowing for easy continuity connections with one hand, even without special skills or experience. 【Usage Scenarios】 - Repairing broken connections on circuit boards of home appliances - Ensuring continuity connections around heat-sensitive components - Securing continuity in areas where soldering is difficult - Connecting flexible printed circuits (FPC) 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Stabilization of quality by minimizing variations in mixing ratios by workers - Reduced risk of damage to components due to heat - Ability to bond various materials with continuity

In the field of research and development, there is a demand for rapid and reliable conductive connections to a variety of materials. This is particularly challenging when creating prototypes, as it may involve components that are sensitive to heat or materials that are difficult to solder. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, and reducing variability in the mixing ratio by the operator. Because it cures at room temperature, it is suitable for conductive connections involving heat-sensitive resin components, FPCs, LEDs, and sensors, and it can also provide conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. 【Application Scenarios】 - Conductive connections for heat-sensitive electronic components (FPCs, LEDs, sensors, etc.) - Conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairing and connecting areas subjected to bending or vibration - Rapid conductive evaluation of prototypes 【Benefits of Implementation】 - Reduces the labor involved in measuring and mixing, improving work efficiency - Minimizes variability in the mixing ratio, achieving stable conductive performance - Reduces the risk of damage to components due to heat - Enables conductive connections to a variety of materials, enhancing development flexibility

In DIY and hobby electronics, precise connections of small components and handling of heat-sensitive materials are required. Particularly in tasks involving difficult-to-solder materials or delicate electronic components, accurate and reliable connections can significantly impact the performance and lifespan of the product. Traditional methods often faced challenges such as the labor involved in measuring and hand mixing, as well as variations in mixing ratios. ONE-HAND MIXING addresses these issues, allowing anyone to easily and reliably achieve electrical connections. 【Usage Scenarios】 - Wiring and component connections in electronics projects - Connections involving heat-sensitive resin parts, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairs and connections in areas subject to bending or vibration 【Benefits of Implementation】 - Reduces the labor involved in measuring and mixing - Minimizes variations in mixing ratios by the operator, achieving stable conductivity performance - Safe and easy to work with, as soldering irons are not required - Maintains flexibility after curing, accommodating various applications

In the automotive industry, reliable fixation and ensuring conductivity of sensors that support vehicle safety and functionality are required. In particular, for sensor components that are sensitive to heat or areas that experience vibration and shock, soldering can be difficult, and there are concerns about the impact of heat on the components. Improper fixation or poor conductivity can lead to sensor malfunctions or failures. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, enabling quick and reliable conductive connections at room temperature without the hassle of measuring or manual mixing. 【Application Scenarios】 - Fixation and ensuring conductivity of heat-sensitive sensor components - Sensor connections in areas subject to vibration or shock - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Work around sensors in tight spaces 【Benefits of Implementation】 - Reduction in work time and improvement in work efficiency - Stabilization of quality by suppressing variations in mixing ratios by workers - Reduction of impact on heat-sensitive components - Enabling conductive connections to materials that are difficult to solder - Response to vibrations due to flexibility after curing

In the repair of circuit boards for home appliances, precise conductive connections are required. Particularly in cases where the circuit board has heat-sensitive components or complex wiring, soldering can often be difficult. Improper connections can lead to product malfunctions or reduced lifespan. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairing or connecting areas subjected to bending or vibration 【Benefits of Implementation】 - Enables safe and easy conductive connections without the need for a soldering iron - Cures at room temperature, minimizing damage to components from heat - Maintains flexibility after curing, providing strong connections resistant to vibration and bending

In the field of medical devices, reliable conduction assurance is required for precise probe connections. Particularly when using heat-sensitive sensors or delicate components, there are cases where soldering is difficult or where it is necessary to avoid thermal effects. In such situations, uniform conduction performance and ease of operation become important. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and manual mixing, and reducing variations in formulation by the operator. Since it cures at room temperature, it can be safely used for conduction connections of heat-sensitive medical device components. 【Application Scenarios】 - Conduction connections of medical probes - Wiring connections around sensors - Conduction repairs of heat-sensitive electronic components - Conduction bonding to glass or resin materials 【Benefits of Implementation】 - Easy conduction connections even in areas where soldering is difficult - Reduction in work time and assurance of uniform quality - Avoidance of damage to components due to heat - Flexibility that accommodates vibrations and bending

In reinforcing robot joints, durability of movable parts and electrical connectivity are required. Particularly in joint areas with complex structures, ensuring reliable fixation and conductivity is essential for maintaining the robot's performance. Improper fixation or poor conductivity can lead to joint damage or malfunction. ONE-HAND MIXING allows for automatic mixing of two liquids simply by pressing, without the need for measuring or manual mixing, easily achieving electrical connections at room temperature where soldering is not possible. 【Usage Scenarios】 - Reinforcement and fixation of robot joints - Electrical connections around sensors and actuators - Adhesion to metals, plastics, and composite materials 【Benefits of Implementation】 - Reduction of work time and minimization of variability by operators - Decreased impact on heat-sensitive components - Enables electrical connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

In the field of wearable devices, there is a demand for the reliable and efficient connection of precision components such as sensors, amidst ongoing miniaturization and thinning. Particularly for connections to materials sensitive to heat or components with complex shapes, traditional heating methods are challenging, and manual mixing poses a risk of performance degradation due to variations in mixing ratios. ONE-HAND MIXING addresses these issues by automatically mixing two liquids with just a push of one hand, providing a simple and reliable conductive connection with a conductive adhesive that cures at room temperature. 【Usage Scenarios】 - Connection of sensor modules to substrates in wearable devices - Formation of conductive patches on flexible printed circuits (FPC) - Fixation and electrical connection of small sensors to housings - Conductive repairs in areas subjected to bending or vibration 【Benefits of Implementation】 - Reduction in work time and labor - Decrease in defects due to mixing errors - Mitigation of damage to heat-sensitive components - Applicability to materials that are difficult to solder - Improved durability due to flexibility

In the drone industry, while lightweight and high-strength structures are required, components such as propellers may need electrical connections. Traditional soldering has faced challenges in dealing with heat-sensitive materials and applying to complex shapes. Additionally, manual mixing of adhesives carries the risk of performance degradation due to variations in mixing ratios. ONE-HAND MIXING addresses these challenges, enabling easy and reliable electrical connections for drone propeller bonding at room temperature. 【Usage Scenarios】 - Electrical connections for drone propeller components - Electrical processing for heat-sensitive resin propellers - Quick repair work on-site 【Benefits of Implementation】 - Enables electrical connections for materials that are difficult to solder - Reduces variations in mixing ratios by operators, achieving stable electrical performance - Lowers the impact on components due to heat, as it cures at room temperature - Flexible and suitable for connections in areas subject to vibration

In the telecommunications equipment industry, particularly in antenna bonding, reliable conductive connections of fine components are essential. The performance of antennas is greatly influenced by the electrical characteristics of the connection points, making the assurance of stable conductive performance indispensable. Traditional methods often face challenges when dealing with materials that are difficult to solder or components that are sensitive to heat. ONE-HAND MIXING offers a solution to these challenges by allowing for automatic mixing of two components simply by pushing, without the need for measuring or manual mixing, enabling conductive connections at room temperature. 【Application Scenarios】 - Conductive connections for telecommunications equipment antennas - Bonding of heat-sensitive resin components - Conductive bonding to dissimilar materials such as glass, aluminum, and stainless steel - Repairing areas subjected to bending or vibration 【Benefits of Implementation】 - Simplification of work processes and reduction of variability by operators - Decreased risk of damage to heat-sensitive components - Improved capability to handle materials that are difficult to solder - Durable connections that leverage flexibility

In the repair of audio equipment, a reliable connection in the conductive parts related to sound quality is essential. Particularly in the wiring and internal connections of speaker units, there may be materials that are difficult to solder and components that are sensitive to heat. Improper connections can lead to deterioration in sound quality or disconnections. ONE-HAND MIXING allows for the automatic mixing of two liquids with a dedicated cartridge and mixer nozzle while dispensing, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive repair of disconnection points in speaker units - Internal wiring connections for tweeters and woofers - Conductive repair of amplifiers and network circuit boards - Conductive connections to metal terminals and resin components that are difficult to solder 【Benefits of Implementation】 - No soldering iron required, enabling safe and easy conductive connections - Safe for use on heat-sensitive components due to room temperature curing - Maintains flexibility after curing, reducing disconnections caused by vibrations - Stable conductive performance reduces sound quality deterioration

In the lighting industry, reliable conductive connections for LEDs are directly linked to product performance and lifespan. Particularly in the implementation of heat-sensitive LED components and surrounding substrates, there is a need to avoid difficulties with soldering and to prevent damage from heat. Additionally, improving work efficiency and minimizing variations in mixing by operators are also important. ONE-HAND MIXING addresses these challenges by automatically mixing and dispensing two components with a dedicated cartridge and mixer nozzle, achieving room-temperature curing conductive adhesion without the need for weighing or manual mixing. This makes it easier to create conductive connections to materials that are difficult to solder and to work around heat-sensitive components. 【Application Scenarios】 - Conductive connections between LED chips and substrates - Wiring connections within LED modules - Ensuring conductivity around heat-sensitive resin components - Conductive adhesion to materials that are difficult to solder, such as glass and aluminum 【Benefits of Implementation】 - Eliminates the need for soldering irons, enhancing safety and convenience in work - Reduces variations in mixing ratios by operators, achieving stable conductive performance - Avoids damage to components from heat due to room-temperature curing - Increases reliability against vibration and bending due to flexibility after curing

In the energy industry, particularly in the connection of solar cells, reliable conductivity is essential. Solar panels are exposed to outdoor conditions and temperature changes, making the durability of connections and stable electrical characteristics indispensable. Connections to materials that are difficult to solder or components that are sensitive to heat can affect the performance and lifespan of the product. ONE-HAND MIXING addresses these challenges by automatically mixing two components with just a push, eliminating the need for weighing and manual mixing, and enabling conductive connections at room temperature. 【Usage Scenarios】 - Wiring connections for solar panels - Connections for flexible solar cells - Conductive bonding to heat-sensitive materials 【Benefits of Implementation】 - Simplification of work and assurance of uniform quality - Compatibility with materials that are difficult to solder - Mitigation of heat impact on components

In the semiconductor industry, reliable conductive connections are required for precise chip fixation. Particularly, when mounting heat-sensitive components or on complex-shaped substrates, soldering can be difficult. The use of inappropriate adhesives or inaccurate mixing ratios can lead to poor connections and reduced product performance. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Application Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS - Repairing or connecting areas subject to bending or vibration 【Benefits of Implementation】 - Reduction in work time and labor - Conductive connections with uniform quality - Compatibility with materials that are difficult to solder

For electrical components, resin parts, flexible substrates, and other conductive connections that want to avoid solder heat. ONE-HAND MIXING can be utilized for conductive fixing and repair with reduced heating processes by applying and curing the necessary amount. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

For those concerned about thermal damage to components and substrates and looking for alternatives to soldering for conductive connections, our room-temperature curing conductive adhesive contributes to improvements in prototyping, repairs, and small-scale production processes. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS, without the use of a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For the repair of conductive connections in components that are difficult to apply heat or mechanical stress, such as FPCs and thin film substrates. ONE-HAND MIXING is easy to apply to targeted areas and is suitable for repair applications around flexible printed circuit boards where soldering is challenging. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For difficult-to-reach areas where soldering irons, screws, and crimping tools are hard to use, you can consider conductive bonding through application in narrow spaces such as fine wires, around connectors, and inside enclosures, where the working space is limited. ONE-HAND MIXING is a product that allows you to automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which helps to minimize variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and the special website.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

When you want to connect GND or earth to metal enclosures or plated parts. Even in structures where screw fastening or riveting is difficult, conductive adhesive connections enhance the design flexibility for enclosure grounding and shield connections. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for weighing or mixing operations, which suppresses variations in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. * For detailed data, please check the TDS and the special website.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

For plated housings and metal parts, it can be difficult to achieve conductive connections through soldering or screwing. By applying and curing conductive adhesive, it can be utilized for fixing ground wires, GND connections, and achieving conductivity in shielding materials. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and around sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For conductive connections in areas where heat is difficult to apply, such as battery tabs and surrounding components. It expands the options for connection methods as a low-temperature and room-temperature curing conductive adhesive in situations where soldering or welding is difficult. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

For conductive connections such as sensor electrodes, lead wires, and thin film electrodes. Even delicate components that are difficult to apply heat or pressure to can achieve both conductivity and fixation simultaneously by applying and curing ONE-HAND MIXING. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible for materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

When you want to make a conductive connection near resin housings or resin substrates while avoiding solder heat. ONE-HAND MIXING is a user-friendly conductive adhesive that can be used at low temperatures, making it useful for the design and repair around resin parts. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

For those who want to simplify the mixing process while taking advantage of the performance of two-component conductive adhesives. ONE-HAND MIXING balances ease of use and conductive connections, contributing to improved workability for small applications, on-site repairs, and prototype evaluations. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

For connecting components such as battery-related materials and large electrodes where surface conductivity is desired, ONE-HAND MIXING aims to reduce the gaps at the contact surface through thin film application and crimping. It allows for the consideration of large-area conductive connections, which tend to be unstable with solder or solvent-drying types, using room temperature curing. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing work, which suppresses variations in the mixing ratio by the operator. - Suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors, as it cures at room temperature. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

For the conductive connections of components used in low-temperature environments, such as refrigeration and freezing equipment or devices used in cold regions. ONE-HAND MIXING maintains an adhesive strength of about 70% or more even in extreme low temperatures (−196℃) during rapid cooling and heating tests, making it a candidate for evaluating connection reliability in low-temperature environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and special website.