ダイシン Product Lineup

Power outages that stop freezers and refrigerators can lead to catastrophic losses of tens of millions of yen for market operators, resulting in "total loss of products" or "halt in shipments." However, are you struggling with the high costs of purchasing and maintaining expensive large emergency generators? Currently, an innovative BCP (Business Continuity Plan) measure is gaining attention: utilizing the "electric forklifts" that are always present in the market as emergency power sources. By using Daishin's "iGen.10000LF," the battery of an electric forklift (a large-capacity DC power source) can be instantly converted to the "three-phase 200V (high output)" needed to operate freezers and refrigerators. This allows for implementation at an overwhelmingly lower cost than installing a dedicated generator, as it makes use of existing assets. There are no concerns about fuel storage or degradation, and since it does not emit exhaust gases, power supply can be safely initiated indoors. In the event of a power outage, to protect your valuable products and trust. Why not start a cost-effective new disaster response utilizing electric forklifts? For detailed specifications and case studies, please download the materials and check them out.

• Other energy equipment

Ensuring "communication" is the top priority for maintaining regional infrastructure during disasters. However, while many municipalities possess mobile power supply vehicles that primarily output "single-phase 200V," critical equipment such as disaster prevention administrative wireless base stations require "three-phase 200V (power)," leading to a mismatch in power supply. The solution to this issue is the three-phase converter "iGen.10000PT," which has also been introduced by the Chubu Regional Police Bureau. This product instantly generates high-quality and stable three-phase 200V power from existing single-phase 200V sources. 【Benefits of Introduction】 1. Existing power supply vehicles can be effectively utilized without the need to purchase expensive three-phase compatible vehicles, contributing to significant cost savings. 2. Its compact design offers excellent mobility, making it easy to transport to disaster sites or load onto power supply vehicles. 3. It is effective not only for wireless base stations but also as a backup for large air conditioning units and water supply and drainage pumps in evacuation centers. For disaster prevention and crisis management officials who have "municipal power supply vehicles but are concerned about driving three-phase equipment," please consider this as a reliable BCP measure that leverages existing resources. Feel free to download the product catalog or consult us regarding specifications.

• Other energy equipment

During power outages caused by typhoons or earthquakes, the "vertical conveyor (Rifcon)" responsible for transporting goods between floors comes to a complete standstill, paralyzing logistics. However, the reality is that the introduction of expensive emergency generators poses a high cost barrier. That’s why we recommend the high-output three-phase 200V inverter "iGen.10000LF." By simply connecting it to the battery of the electric forklift on-site, it quickly transforms into an emergency power source to operate the Rifcon. This allows you to leverage existing assets and achieve reliable BCP measures at a low cost. [Three Reasons to Choose This Product] 1. Overwhelmingly Low Cost Significantly reduces investment compared to the installation and maintenance costs of generators. 2. 10kW High Power Effectively drives the three-phase 200V motor of the Rifcon, which cannot be operated by standard portable power sources. 3. Excellent Mobility Since it can be moved along with the forklift, it can flexibly supply power to necessary equipment during power outages, such as shutters and lighting. If you want to know whether your Rifcon can operate or if you would like to see the specifications, please download the materials for confirmation.

• Other energy equipment

"Even though there is an emergency power supply, the elevators and commercial refrigerators do not operate" — the cause lies in the difference in specifications between the power supply (single-phase) and the equipment (three-phase). Daishin's "iGen.10000PT" is a "translator of electricity" that overturns this common understanding. The electricity that can be drawn from EVs, solar power, and storage batteries is typically "single-phase," while large equipment in buildings and factories requires "three-phase (power)." The iGen converts single-phase 200V to three-phase 200V, enabling power supply to equipment while maintaining existing infrastructure. [Reasons to Choose iGen] High output & starting current support: Achieves a rated capacity of 9.9kVA (maximum 12kVA). Thanks to a patented special circuit, it can also handle motors with high inrush currents. High-quality sine wave: With microcontroller control (P.W.M method), it can be safely used with commercial equipment that requires precise control. It resolves the resignation of "not being able to operate without a power contract" and provides new options for preparedness during power outages and cost reduction.

• Converters and Transducers

BCP measures and a three-phase 200V inverter "iGen.10000LF" that works even during power outages. It ensures that automated warehouses continue to operate during disasters and power outages. This is made possible by Daishin Co., Ltd.'s three-phase 200V inverter "iGen.10000LF." Utilizing the battery power of forklifts, it supplies a maximum output of 9.9kVA at three-phase 200V. Even if the power infrastructure is halted, existing automated warehouses can continue to operate as is. Depending on the battery capacity, the continuous operating time can exceed 20 hours. It can flexibly adapt to the battery situation on-site as follows: Battery Capacity (Ah) Continuous Operating Time (Approx.) 390Ah About 10.9 hours 600Ah About 16.8 hours 730Ah About 20.4 hours A new proposal that excels in various scenarios such as BCP (Business Continuity Plan) measures, power backup, and disaster response. Ensure a reliable power supply for your automated warehouse with the "iGen.10000LF." For more details → www.daishin-japan.co.jp Contact: igen@daishin-japan.co.jp

• inverter
• Other energy equipment

Risk of business interruption during power outages, is your warehouse okay? The "iGen.10000LF" is a groundbreaking BCP (Business Continuity Plan) inverter that utilizes the battery of electric forklifts (DC48V) to supply three-phase 200V power. It supports the stable operation of logistics and warehouses by keeping automated warehouses, refrigeration equipment, and conveyor systems running even during power outages. Forklifts become instant power sources! • High-efficiency conversion from DC48V to three-phase 200V • Large capacity output of 9.9kVA, allowing three-phase equipment to operate directly • Unlike generators, it operates cleanly with zero noise and exhaust emissions Why choose iGen.10000LF now? • Low implementation costs since existing forklifts can be used • Immediately usable as a portable inverter Steps to implementation: 1. Inquiry and request for materials 2. Hearing about the usage environment and simulation 3. Quotation and implementation proposal 4. Product delivery and start of operation Request materials or contact us now. BCP measures for logistics and warehouses are realized with the uninterrupted power source "iGen.10000LF." Proposed by Daishin.

• Inverter
• power supply

Many companies are introducing automated warehouses and mobile shelves to improve operational efficiency and storage efficiency, but what about BCP measures for these logistics equipment, particularly emergency power supply measures? If BCP measures are not in place for automated warehouses and mobile shelves, the following scenarios can be anticipated in the event of a power outage due to a disaster: - Manual entry and exit of goods becomes impossible or requires significant labor. - Stoppage of shipments leads to impacts on the supply chain and society. - Loss of sales and sales opportunities. By preparing an emergency power supply as a BCP measure, these impacts can be minimized, contributing to the company's credibility and the prompt recovery of business operations. The Daishin 9.9kVA three-phase 200V inverter "iGen.10000LF" allows for easy use of three-phase 200V simply by connecting it to an electric forklift (DC48V). We encourage you to consider the iGen.10000LF as an emergency power supply for BCP measures for logistics equipment such as automated warehouses and mobile shelves. *For more details, please refer to the product catalog available for download as a PDF or feel free to contact us.

• Inverter
• power supply

*Toyota L&F Chubu Co., Ltd. Service Supplies Catalog vol.9 Listed Products Daisan's uniquely developed three-phase 200V inverter "iGen.10000LF" can be used as an emergency power source for commercial refrigerators and prefab cold storage when connected to an electric forklift (DC48V). Please consider it for power outages, disasters, and BCP measures.

• Other energy equipment

Three-phase 200V equipment is responsible for various "essential operations" such as infrastructure, logistics, and communication, which impact many people, making it very important to prepare for emergencies. Japan is a country prone to natural disasters. In 2024 alone, various natural disasters have occurred, including the Noto Peninsula earthquake on New Year's Day, an earthquake off the coast of Hyuga in August, and heavy rain disasters in various regions. Additionally, during the Obon period, a temporary alert for the Nankai Trough earthquake (warning of a massive earthquake) was issued. As disaster prevention and BCP measures are gaining attention, we encourage you to consider the "iGen." series as a disaster prevention and BCP solution for three-phase 200V equipment. For details on each model and the catalog, please refer to the product page or "PDF Download."

• Other energy equipment
• inverter

The Daishin "iGen.10000LF" is a DC48V - three-phase (power) 200V inverter with a maximum output of 12kVA and a rated output of 9.9kVA. It is equipped with a unique inverter that has obtained various patents and utility models. ■ [Patent] Parallel Operation Method Can be connected in parallel. Output can be easily increased. ■ [Patent] Inrush Current Support Supports inrush current for motor equipment. Can operate a 5.5kW motor. *Please contact us for details as it may vary depending on the equipment used. ■ [Utility Model] Digital Inverter with Special Circuit Adopts a special circuit with various built-in protection functions. It can be used to build off-grid environments for three-phase (power) systems in conjunction with storage batteries and electric forklifts, as well as for disaster prevention and BCP measures.

• Other energy equipment

The iGen.10000IV is a unique three-phase (power) inverter developed by Daishin, born from the development of large inverter generators, with a maximum output of 12kVA and a continuous operating output of 9.9kVA, providing a pure sine wave output. Utilizing the technology and experience gained from inverter generator development, we have obtained various patents and utility models. ■ [Patent] Parallel Operation Method Can be connected in parallel. Easily increases output. ■ [Patent] Inrush Current Support Supports inrush current for motor equipment. Can operate a 5.5kW motor. *This varies depending on the equipment used, so please contact us for details. ■ [Utility Model] Digital Inverter with Special Circuit Incorporates a special circuit with various built-in protection functions. It can be used in combination with solar power generation, storage batteries, V2H systems, etc., to build off-grid environments for three-phase (power) applications and for disaster prevention and BCP measures. *For more details, please refer to the product catalog available for download in PDF format. Feel free to contact us as well.

• Other energy equipment

"I want to introduce a three-phase 200V machine, but the power contract is a hurdle..." For those who have such concerns. ✅ Directly output three-phase 200V from single-phase 200V! ✅ No need for power contracts or electrical work! * Connection work to the distribution board may be required. ✅ Three-phase equipment can be used directly in factories, farms, maintenance shops, temporary sites, and more! Daishin's 'iGen.10000PT' is a single-phase to three-phase converter with a maximum output of 12kVA and a rated output of 9.9kVA. It is equipped with a uniquely developed inverter that has obtained various patents and utility models, allowing for easy conversion of single-phase (lighting) 200V to three-phase (power) 200V. * For more details, please check the product catalog from "PDF Download." Also, feel free to contact us.

• Converters and Transducers

The Daishin Inverter product series "iGen." is a highly versatile inverter product that can generate three-phase (power) from various DC and AC power sources. We have compiled examples of implementation and verification, so please refer to them.

• Other energy equipment

Motor equipment such as submersible pumps requires a power supply capacity of about 3 to 5 times the rated capacity because it experiences a load several times the rated capacity at startup. Daishin's off-grid three-phase inverter products utilize patented starting current support technology (inrush mechanism), allowing them to start a 5.5 kW submersible pump while maintaining a continuous operating output of 9.9 kVA. A video of the 5.5 kW submersible pump startup test has been uploaded to the related link for your reference.

• Other energy equipment

By utilizing Daishin's off-grid three-phase 9.9kVA inverter, you can easily generate three-phase (power) 200V using the battery of an electric forklift (DC48V) as a power source. Please consider it for emergency power supply and BCP measures. For more details, feel free to contact us.

• Other energy equipment

The iGen.10000PT single-phase to three-phase converter utilizing the Daishin inverter can easily convert single-phase (lighting) 200V to three-phase (power) 200V. The example in the photo shows the operation of a submersible pump (2.2kW) for wells and a high-pressure pump (750W) for water supply. In this case, a three-phase (power) submersible pump and high-pressure pump are used to supply water to a trailer house, receiving single-phase (lighting) 200V supply from the power converter, which is then converted to three-phase (power) 200V using the iGen.10000PT for powering the pumps. The inverter has also successfully operated a 5.5kW submersible pump. For more details, please feel free to contact us.

• Other energy equipment

The iGen.10000PT single-phase to three-phase converter utilizing the Daishin inverter can easily convert single-phase (lighting) 200V to three-phase (power) 200V. The example in the photo shows a case where it was installed as a three-phase (power) power source for a trailer house, combined with solar power generation, storage batteries, and a power conditioner (single-phase 200V). When supplying water to the trailer house, a three-phase (power) submersible pump and a high-pressure pump are used. It receives single-phase (lighting) 200V supply from the power conditioner and is utilized as a power source for the pumps after being converted to three-phase (power) 200V by the iGen.10000PT. For more details, please feel free to contact us.

• Other energy equipment

The iGen.10000PT single-phase to three-phase converter utilizing the Daishin inverter can easily convert single-phase (lighting) 200V to three-phase (power) 200V. The example in the photo is an experiment that started a 5.5kW submersible pump. Three-phase motor equipment requires 3 to 5 times the rated output power during startup due to starting current. Daishin's off-grid three-phase 9.9kVA inverter employs patented technology to handle starting current, allowing it to start a 5.5kW submersible pump while maintaining a rated output of 9.9kVA. Please feel free to contact us for more details.

• Other energy equipment

The single-phase to three-phase converter iGen.10000PT, utilizing the Daishin inverter, allows for easy use of three-phase (power) by collaborating with the V2H/V2L system. The photo shows an example where it was introduced as an emergency power source for a three-phase prefabricated refrigerator in conjunction with the V2H system. For more details, please feel free to contact us.

• Other energy equipment

The single-phase to three-phase converter iGen.10000PT, utilizing the Daishin inverter, can easily convert single-phase (lighting) 200V to three-phase (power) 200V. The example in the photo shows that we supplied single-phase (lighting) 200V from an existing solar power and battery storage system for office use and converted it to three-phase (power) for use as an elevator power supply. Please feel free to contact us for more details.

• Other energy equipment

The single-phase to three-phase converter iGen.10000PT, utilizing the Daishin inverter, can easily convert single-phase (lighting) 200V to three-phase (power) 200V. The case in the photo illustrates a situation where there was a mix of single-phase and three-phase in an office and warehouse emergency power supply system. By introducing the single-phase to three-phase converter iGen.10000PT, they were able to secure a power supply for a three-phase prefabricated refrigerator. For more details, please feel free to contact us.

• Other energy equipment