中部電力ミライズ Product Lineup

"WETCOMII" is an air conditioning unit that does not use steam, eliminating the need for boiler equipment and steam piping, and significantly reducing the occurrence of extensive maintenance. Tasks essential for steam systems, such as boiler water treatment, combustion management, regular inspections, and piping corrosion prevention, are no longer necessary, leading to substantial reductions in maintenance effort and costs. Additionally, there is no risk of equipment shutdown due to steam troubles, allowing for stable air conditioning operation. In environments like painting booths, where long hours of operation are required, high maintainability offers significant operational advantages. 【Features】 ■ No boiler required, no extensive maintenance needed *For more details, please refer to the related links or feel free to contact us.

• air conditioning
• Other air conditioning equipment

"WETCOMII" adopts a unique method that directly contacts a large amount of water with outside air, allowing for simultaneous purification of the incoming air, making it a wet air conditioning unit. It can capture dust, floating particles, and fine particles contained in the outside air by bringing them into contact with water, sending only the purified air into the interior of the air conditioning unit. In work environments such as painting booths or those requiring dust control, the quality of outside air directly affects the finish. This unit is equipped with an air purification function, which achieves high-quality air conditioning while reducing the load on external filters. 【Features】 ■ Washes outside air by contacting it with a large amount of water *For more details, please refer to the related links or feel free to contact us.

• air conditioning
• Other air conditioning equipment

"WETCOMII" is a high-efficiency air conditioning unit that reduces CO2 emissions and running costs by approximately 70% compared to conventional steam-based air conditioning systems by adopting a heat pump system. Since it does not use steam, there is no need for fuel-consuming boiler equipment, significantly reducing the energy required for heating and humidifying. Temperature and humidity control using heat pumps is highly stable and can secure sufficient processing capacity with less energy, enabling simultaneous reduction of environmental impact and operational costs. It has received high praise as an environmental countermeasure facility in painting booths and manufacturing sites where greenhouse gas reduction is required. 【Features】 ■ 70% reduction in CO2 and running costs compared to steam systems *For more details, please refer to the related links or feel free to contact us.

• air conditioning
• Other air conditioning equipment

"WETCOMII" is a wet air conditioning unit that demonstrates high humidification performance without using any steam. In humidity management for painting booths, steam humidification is generally used; however, this unit can maintain sufficient humidification and a stable humidity environment without steam, thanks to its unique humidification method. This eliminates the need for boiler equipment and avoids issues related to steam piping and leaks while ensuring the necessary humidity. Additionally, it reduces running costs associated with steam humidification and features a structure that makes it easy to implement during equipment upgrades. By not using steam, safety is also improved, contributing to the stabilization of painting quality. 【Features and Points】 ■ Achieves high humidification performance without steam *For more details, please refer to the related links or feel free to contact us.

• air conditioning
• Other air conditioning equipment

The "Infrared Heater Type Mold Heater" is characterized by its ability to efficiently raise the temperature by uniformly irradiating infrared light onto the surface of the mold. Unlike methods that heat locally, such as gas burners, this system warms the entire mold simultaneously, eliminating temperature unevenness and significantly reducing startup time. Additionally, because the surface temperature of the mold rises uniformly, the heating process to reach the target temperature is streamlined, shortening the preheating stage itself. This directly contributes to improving the overall efficiency of the production cycle. With shorter heating times, production waiting times are reduced, which also helps improve line operating rates. 【Features】 ■ High-efficiency infrared heating ■ Uniform heating of the entire mold ■ Increased productivity due to significant reduction in heating time *For more details, please refer to the related links or feel free to contact us.

• Heating device

The "Infrared Heater Type Mold Heater" is characterized by its high installation capability, as it requires no piping work, burner installation, or exhaust system construction like gas-type mold preheating, allowing for quick implementation. It can be used simply by installing the infrared heater unit, eliminating the need to stop the production line for an extended period for construction, thus minimizing the impact on the production schedule. Additionally, it allows for flexible layouts that fit existing equipment spaces, leading to significant reductions in startup labor. It is easy to implement even in sites where equipment updates are difficult, making it ideal for foundry sites that require quick startups. 【Features】 ■ No large-scale construction required ■ Can be directly integrated into existing lines ■ Significantly reduces startup labor *For more details, please refer to the related links or feel free to contact us.

• Heating device

In automation engineering, "variability in heating" tends to hinder quality stability. The "infrared heater type mold heater" can uniformly heat the entire mold through infrared irradiation, enabling stable startup and highly reproducible temperature management. Since it does not use flames, there are no exhaust gases, and it also suppresses the rise in ambient temperature. It contributes to CO2 emission reduction and improvement of the working environment. Its high heating efficiency leads to reduced heating time, allowing for a balance between productivity and energy saving. 【Features】 ■ Optimal for automated processes with uniform and stable heating ■ Reduces quality defects by suppressing temperature variations ■ Significant reduction in CO2 emissions compared to gas combustion ■ Zero exhaust loss reduces ambient temperature ■ Shortens heating time and improves cycles ■ Easy to install and implement ■ Extends mold lifespan and reduces maintenance burden *For more details, please refer to the related links or feel free to contact us.

• Heating device

In gas combustion-type mold preheating, the surrounding temperature rises due to heat dissipation from exhaust gases, leading to challenges such as heat stress on workers and deterioration of the working environment. The "infrared heater-type mold heater" eliminates exhaust gas loss due to its electric nature, helping to suppress the rise in temperature in the work area. Furthermore, uniform heating through infrared irradiation simultaneously achieves extended mold life, reduced quality defects, and decreased CO2 emissions. Its high heating stability also makes it suitable for process automation. 【Features】 - Zero exhaust gas, ideal for heat stress measures (reduces surrounding temperature) - Extends mold life through uniform heating - Contributes to the reduction of quality defects - Significantly reduces CO2 emissions - Shortens heating time with high-efficiency heating - Easy to install and implement - Supports process automation *For more details, please refer to the related links or feel free to contact us.

• Heating device

The "infrared heater type mold heater" minimizes temperature unevenness that tends to occur with conventional gas combustion types by widely and uniformly irradiating infrared light over the entire mold. Temperature unevenness is a major factor in poor casting quality, but uniform heating stabilizes molding quality and significantly contributes to reducing defect rates. Additionally, because it uses electric heating, it does not produce exhaust gases, suppressing the rise in ambient temperature and reducing heat stress in the work environment. Furthermore, high-efficiency heating also achieves a reduction in heating time and CO2 emissions simultaneously. 【Features】 ■ Significantly reduces quality defects through uniform heating ■ Suppresses local overheating and extends mold life ■ Higher efficiency than gas types, reducing CO2 emissions ■ No rise in ambient temperature due to exhaust gases, improving the work environment ■ Increases productivity by shortening heating time ■ Easy installation without the need for extensive construction ■ Supports automation of processes through heating stabilization *For more details, please refer to the related links or feel free to contact us.

• Heating device

In gas combustion preheating, there was a challenge where the mold was locally overheated due to the way the flame hit it, leading to distortion and temperature unevenness. The "infrared heater type mold heater" uniformly irradiates infrared light, allowing for even heating of the entire mold, which extends the mold's lifespan and reduces quality defects. Additionally, as it is electric and does not emit exhaust gases, it suppresses the rise in ambient temperature and improves the working environment. It also contributes to high heating efficiency and reduced heating time. 【Features】 ■ Prolongs mold lifespan with uniform heating (distortion suppression) ■ Reduces quality defects by suppressing temperature unevenness ■ Zero exhaust gases reduce heat stress and improve the working environment ■ More efficient than gas combustion methods, reducing CO2 emissions ■ Shortens heating time and enhances productivity ■ Easy to install and implement ■ Supports process automation due to stable heating *For more details, please refer to the related links or feel free to contact us.

• Heating device

The "Infrared Heater Type Mold Heater" is an electric heating device that comprehensively addresses the issues of exhaust gas loss, high CO2 emissions, and temperature unevenness associated with gas combustion-type mold preheating. By uniformly irradiating infrared light across the entire mold, it suppresses localized overheating, directly contributing to the reduction of mold distortion and the extension of its lifespan. Additionally, the high-efficiency and waste-free heating reduces energy consumption, achieving a significant reduction in CO2 emissions. Since it uses electric heating, there are no exhaust gases generated, which also helps to alleviate the heat load in the working environment. 【Features】 ■ Significant reduction in CO2 emissions compared to gas combustion methods ■ Prolonged mold lifespan due to uniform heating (prevention of localized overheating) ■ Reduction in quality defects (reduction of temperature unevenness) ■ Zero exhaust gas loss, lowering ambient temperature and improving the working environment ■ Shortened heating time due to high-efficiency heating ■ Easy installation with minimal construction burden ■ Improved heating stability, making it ideal for process automation *For more details, please refer to the related links or feel free to contact us.

• Heating device

The "Preheating Heater for Casting Pots" is a device that uniformly heats casting pots using infrared radiation. It prevents localized overheating that can occur with gas burner preheating and suppresses the occurrence of warping in the casting pots. This makes it possible to stabilize casting quality. 【Benefits of Introduction】 - Suppresses warping of casting pots through uniform heating - Improves working environment and prevents product contamination with zero soot - Reduces CO2 emissions and enables energy-saving operation ON/OFF operation and output control can also be easily performed, making it compatible with automated lines. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

The "Preheating Heater for Casting Pots" is a clean preheating device that heats casting pots using infrared. Unlike gas burners, it does not produce soot and has no exhaust gas loss, preventing a decline in the quality of cast products. 【Main Features】 - Zero soot generation to prevent product contamination - No exhaust gas loss improves the working environment - Uniform heating reduces distortion of casting pots It also allows for adjustable heating output and ON/OFF control, achieving energy-saving operation. *For more details, please refer to the related links or feel free to contact us.*

• Other heaters

The "Preheating Heater for Cooking Pots" is an infrared preheating device that can heat cooking pots without generating exhaust gases. It eliminates exhaust gas loss associated with gas burner preheating and can lower the surrounding temperature, making it effective for heat stress measures and improving the working environment. 【Benefits of Introduction】 - Zero exhaust gas and reduced surrounding temperature - Reduced heat stress burden on workers - Clean electric heating that does not produce soot, stabilizing product quality Furthermore, uniform heating of the cooking pot prevents local overheating and suppresses pot distortion. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

The "Preheating Heater for the Pot" is a device that allows for preheating of the pot with just the lift operation and power ON/OFF. Compared to conventional gas burner preheating, it is easier to operate, reducing the burden on workers and facilitating integration into automated lines. 【Main Features】 - Simple operation with just ON/OFF - Automation possible with automatic control - High-efficiency heating for CO2 reduction Additionally, uniform infrared heating stabilizes casting quality. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

The "Preheating Heater for Cooking Pots" is a preheating device that uses infrared technology, significantly reducing CO2 emissions compared to conventional gas burners. It operates with high efficiency and low energy consumption, without the need for large amounts of air for combustion. 【Benefits of Implementation】 - Reduction of environmental impact through CO2 reduction - Energy cost savings through high-efficiency heating - Clean heating with no exhaust gas losses Furthermore, energy-saving operation is possible through output control, achieving both stable casting quality and environmental measures. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

The "HD Thermo Generator" is a rapid heating device that utilizes superheated steam, significantly reducing heating time compared to conventional hot air heating. This allows for shorter furnace lengths, contributing to space-saving and optimization of factory layouts. 【Main Features】 - Improved line operating rate with high-speed heating - Stable product quality with uniform atmosphere heating - Reduced oxidation risk by controlling oxygen concentration By optimizing steam volume, temperature, and wind speed, operations can be tailored to the heating profile. *For more details, please refer to the related links or feel free to contact us.*

• Heating device

The "HD Thermo Generator" is a rapid heating device using superheated steam, significantly reducing heating time compared to conventional hot air heating. Shortening heating time leads to reduced energy consumption, contributing to lower running costs for factories. 【Main Features】 - High-speed and uniform atmosphere heating for stable quality - Safe heating with reduced oxidation risk - Energy cost reduction through shortened heating time - Optimization of steam volume, temperature, and wind speed to accommodate heating profiles for each product. By optimizing steam volume, temperature, and wind speed, it is possible to adapt to the heating profiles for each product. *For more details, please refer to the related links or feel free to contact us.

• Heating device

The "HD Thermo Generator" is a rapid heating device that utilizes superheated steam. Compared to conventional hot air heating, it can heat products in a shorter time, significantly reducing the cycle time of the entire production line. 【Main Features】 - High thermal capacity for fast and uniform atmospheric heating - Reduced oxygen concentration to lower oxidation risk - Shortened heating time to improve line operating rate By optimizing steam volume, temperature, and wind speed, it can accommodate heating profiles for each product. *For more details, please refer to the related links or feel free to contact us.

• Heating device

Perfect for sites with the risk of fire due to gas heating. The "Board Bus Furnace" achieves molten metal retention through electric heating, reducing the risk of fire. It enables safe and stable heating. 【Features】 - Fire prevention with gas-free heating - Stable retention of molten metal temperature - No need for crucible furnaces - Contributes to energy saving and efficiency *For more details, please refer to the related links or feel free to contact us.

• Industrial Furnace

Solving issues such as "the surrounding temperature rises due to gas heating, causing soot to adhere to the aluminum surface." The "Board Bus Furnace" suppresses the rise in surrounding temperature through direct heating, preventing soot from adhering to cast products and stabilizing quality. 【Features】 - Suppresses the rise in surrounding temperature - Reduces soot generation on aluminum surfaces - Stabilizes quality - Energy-efficient operation *For more details, please refer to the related links or feel free to contact us.

• Industrial Furnace

In the conventional gas burner method, regular replacement due to the wear of the crucible furnace was necessary. The "Board Bus Furnace" eliminates the need for a crucible furnace and provides direct heating. This removes the need for regular replacement work, reducing maintenance burden and costs. 【Features】 - No need for crucible furnace replacement - Reduced production downtime - Maintained heating efficiency - Reduced maintenance burden *For more details, please refer to the related links or feel free to contact us.

• Industrial Furnace

Solving the issue of "unstable molten metal temperature affecting the quality of cast products." The "Board Bus Furnace" excels in insulation, stabilizes the molten metal temperature, and improves heating efficiency. 【Features】 - Stabilization of molten metal temperature - Reduction of crucible wear - Improved heating efficiency - Energy-saving operation *For more details, please refer to the related links or feel free to contact us.

• Industrial Furnace

Solving issues such as "energy is required to maintain the temperature of the molten metal" and "there is significant fuel loss due to heat dissipation." The "Board Bus Furnace" excels in insulation and minimizes heat loss. It reduces energy consumption while stabilizing the temperature of the molten metal. 【Features】 - Energy savings through reduced heat loss - Stabilization of molten metal temperature - Compatible with existing heat source backup - Easy heater replacement *For more details, please refer to the related links or feel free to contact us.

• Industrial Furnace

Solving challenges such as "high wastewater treatment costs" and "complicated water quality management." The integrated development solution achieves energy savings, efficiency improvements, and reduced environmental impact through the control and optimization of water treatment and wastewater processes. 【Features】 - Optimization of wastewater treatment efficiency - Reduction of operational costs - Energy savings and reduced environmental impact - Operational improvements through data utilization *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as "high labor costs for visual inspections" and "decreased yield due to overlooking defective products." The integrated development solution automates the inspection process using image analysis technology, achieving efficiency and quality improvement. 【Features】 - Reduction of inspection labor costs - Improvement of yield by reducing defective products - Quality management through data utilization - Can be implemented on existing equipment *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as "long heating times leading to decreased production efficiency" and "temperature inconsistencies causing unstable quality." The integrated development solution optimizes temperature and time control in the heating process, achieving quality, productivity, and energy savings. 【Benefits of Implementation】 - Energy savings in the heating process - Stabilization of product quality - Improvement in production efficiency - Improvement proposals through data utilization *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as "high air conditioning load leading to increased energy costs" and "difficulty in managing temperature and humidity in the work environment." The integrated development solution achieves both energy savings and a comfortable working environment through the optimization of air conditioning control. 【Features】 - Optimization of air conditioning load - Cost reduction through energy-saving operations - Improvement of the working environment - Data-driven operational improvements *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as 'insufficient drying leading to product defects' and 'high energy consumption.' Chubu Electric Power Miraiz achieves both quality improvement and energy savings through the control and optimization of the drying process. 【Features】 - Automatic control of temperature and humidity - Stabilization of product quality - Reduction of energy consumption - Improvement of yield *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as "the cleaning process requires a lot of labor and there is a shortage of workers" and "managing water volume and temperature is complicated." Chubu Electric Power Miraiz's integrated development solution automates and optimizes the cleaning process, achieving energy savings and increased efficiency. 【Benefits of Implementation】 - Improved work efficiency - Conservation of water resources and energy savings - Stabilization of product quality - Cost-effective improvements *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Addressing the challenges of 'long cooling times leading to decreased production efficiency' and 'product defects due to temperature variations.' Chubu Electric Power Miraiz's integrated development solution controls and optimizes the cooling process, achieving energy savings and quality improvement. [Features] - Optimization of cooling efficiency - Uniformity of product temperature - Energy reduction and cost savings - Improvement proposals through data utilization *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Solving issues such as 'defective products due to variations in melting temperature' and 'high energy consumption.' Chubu Electric Power Miraiz's 'Integrated Development Solution' provides control technology optimized for the melting process. 【Benefits of Implementation】 - Maintenance of stable melting temperature - Reduction of defect rate - Improvement of energy efficiency - Utilization of data for increased productivity *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other analyses
• Other water treatment

Addressing the issue that "conventional radiation thermometers have large measurement errors due to disturbances," the 'MiEL Thermo HT' utilizes image analysis technology to suppress the effects of disturbances and achieve stable temperature measurement. 【Features】 - Stable measurement resistant to disturbances - Automatic extraction of a wide range of molten metal temperatures - Improved traceability for each mold - Reduced man-hours by decreasing thermocouple work This is a solution that balances stable temperature measurement with quality improvement. For more details, please download the materials or feel free to contact us.

• Radiation thermometer

In traditional manual thermocouple measurements, issues such as increased labor and waste generation were challenges. The "MiEL Thermo HT" automatically measures the temperature for each mold, reducing the number of thermocouple operations. 【Benefits of Implementation】 - Reduction in labor hours - Decrease in waste generation - Improved quality through stable data acquisition - Easy integration with existing equipment This is a temperature measurement solution that balances production efficiency and environmental impact reduction. For more details, please download the materials or feel free to contact us.

• Radiation thermometer

Responding to the need to "improve quality by utilizing process data." 'MiEL Thermo HT' provides stable temperature data for each mold, which can be used for analysis and improvement. Features: - Process improvement utilizing data - Stabilization of quality and reduction of defects - Reduction of labor hours by decreasing the number of thermocouple operations - Easy implementation into existing furnaces If you are considering data-driven quality management, please download the materials for more details or feel free to contact us.

• Radiation thermometer

Addressing the on-site challenge of "difficult temperature management for each mold." 'MiEL Thermo HT' can automatically and stably measure the temperature for each mold, contributing to improved traceability. 【Benefits of Implementation】 - Temperature data acquisition on a mold-by-mold basis - Early detection of defective products - Usable as process management data - Labor-saving for thermocouple work Perfect for enhancing quality control and traceability. For more details, please download the materials or feel free to contact us.

• Radiation thermometer

Addressing product quality variations caused by "temperature fluctuations during extraction." 'ALHYPER MAX' directly heats with a high output of 20kW, stabilizing the molten metal temperature. 【Benefits of Implementation】 - Improved quality by suppressing temperature fluctuations - Enhanced yield - Compatible with retrofitting existing furnaces - Contributes to energy savings and decarbonization If you are struggling with quality improvement and stabilization, please check the related links for more details or feel free to contact us.

• Other heaters

In conventional gas furnaces, material degradation due to combustion is a challenge. The 'ALHYPER MAX' achieves high output with temperature stability through combustion-free electrification. It reduces the load on furnace materials and realizes a longer lifespan. 【Product Features】 - Extends furnace lifespan - Reduces maintenance frequency - Maintains stable molten metal temperature - Easy to install with retrofitting options Please consider this as an investment in equipment that enables long-term operation. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

Fundamentally eliminate concerns about "fire accidents and abnormal combustion" with gas furnaces. 'ALHYPER MAX' ensures safety with an electric heating method, providing stable operation even at high output. 【Product Features】 - Eliminates flame risks - Stable temperature at high output - Compatible with retrofitting existing furnaces - Enhances operator safety Perfect for sites that prioritize safety and stable operation. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

There is an increasing number of workplaces that are addressing the issue of "worker burden due to heat from gas furnaces," but 'ALHYPER MAX' reduces radiant heat through electrification, improving hot work conditions. 【Benefits of Implementation】 - Reduction of heat load in the work environment - Safe and comfortable working space - High-output and efficient molten metal heating - Simultaneous achievement of decarbonization and energy saving *For more details, please refer to the related links or feel free to contact us.

• Other heaters

Ideal for companies that feel "reducing CO₂ emissions from gas furnaces is a challenge" in the pursuit of decarbonizing manufacturing sites. 'ALHYPER MAX' significantly reduces CO₂ emissions through electric heating and maintains stable molten metal with a high output of 20kW. 【Product Features】 - Smooth transition from gas furnaces to electrification - Rapid and stable temperature maintenance with high output - Contributes to CO₂ emission reduction - Can be retrofitted to existing furnaces *For more details, please refer to the related links or feel free to contact us.*

• Other heaters

Eliminates issues such as "heating not keeping up" and "temperature unevenness." The 'ALHYPER MAX' achieves an ultra-high output of 20kW by adopting high melting point heating materials, directly heating the molten metal. 【Features】 - Suppresses temperature unevenness even in large capacity furnaces - Reduces startup time - Maintains stable molten metal temperature - High durability and reduced risk of disconnection It can be safely introduced even in high-load environments. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

Addressing the on-site challenge of wanting to electrify without updating the furnace. The 'ALHYPER MAX' can be retrofitted to existing holding furnaces, reducing modification costs and construction time. 【Product Features】 - Can be introduced while utilizing existing furnaces - Easy to replace and maintain - Direct heating with high output of 20kW - CO₂ reduction and energy-saving effects *For more details, please refer to the related links or feel free to contact us.

• Other heaters

Solving challenges such as "It takes time to replace the heater" and "We cannot stop the production line." 'ALHYPER MAX' allows for easy replacement work and enables a quick return to the site. 【Benefits of Introduction】 - Replacement work can be completed in a short time - Compatible with retrofitting to existing furnaces - Maintains molten metal stability with high output - Reduces production line downtime losses *For more details, please refer to the related links or feel free to contact us.

• Other heaters

Eliminating issues frequently encountered with gas furnaces, such as "time-consuming replacements" and "heavy burden on operators." The 'ALHYPER L' features a structure that makes replacement work easy, contributing to increased productivity on site. 【Main Features】 - Easy replacement, significantly reduced downtime - Compatible with existing furnaces for retrofitting - Stable heating even in low bath surface furnaces - Contributes to energy savings and decarbonization For inquiries about short delivery times or implementation consultations, please feel free to download the materials or contact us.

• Other heaters