中部電力ミライズ Product Lineup

"WETCOMII" is a wet air conditioning system that pursues not only economic and environmental benefits but also controllability. Developed as a temperature and humidity control air conditioning unit, it aims for high efficiency in outdoor air conditioning, seeking economic and environmental advantages beyond those of other heat pump systems, without the use of steam or gas. Furthermore, it achieves sufficient humidification performance without using steam, in addition to energy-saving capabilities. 【Benefits of Implementation】 ■ Achieves high humidification performance without steam ■ Improves economic and environmental efficiency with a heat pump system ■ Cleans the air by coming into contact with large amounts of water ■ Eliminates the need for extensive maintenance of boilers and piping components *For more details, please refer to the related links or feel free to contact us.

The "Infrared Heater Type Factory Heating Device" has a startup time of 1.4 seconds, allowing it to instantly warm the work environment. It is a heating solution that achieves CO2 reduction and improves the work environment. By using electricity, it not only avoids the use of fossil fuels and steam but also enables energy-efficient operation by directly heating the workers instead of warming the entire factory. Additionally, it is equipped with a human presence sensor that automatically turns off the power when no one is present, helping to reduce unnecessary power consumption. 【Implementation Effects (Partial)】 ■ Reduction in the use of steam and gas by eliminating air curtains ■ Energy costs cut by up to 94% (depending on the implementation case) ■ Built-in human presence sensor activates only when people are present, further enhancing energy savings ■ Startup time of 1.4 seconds, capable of immediately heating the work environment ■ Compact and powerful, a high-density heat source that matches factory use *For more details, please refer to the related links or feel free to contact us.

A "heat pump" is a device that transfers heat from a lower temperature to a higher temperature, utilizing technology to recover unused energy from air or water. Since heat pumps can utilize unused energy, they are more energy-efficient compared to steam or electric heaters. Our company offers numerous proposals and implementations of heat pumps. We can examine the balance of cold and hot thermal energy, which is a challenge when considering heat pumps, as well as the effects of their implementation. [Related Products] ■WETCOMII *For more details, please refer to the related links or feel free to contact us.

"WETCOMII" is a wet air conditioning unit that demonstrates high humidification performance without using any steam. In humidity management for painting booths, steam humidification is generally used; however, this unit can maintain sufficient humidification and a stable humidity environment without steam, thanks to its unique humidification method. This eliminates the need for boiler equipment and avoids issues related to steam piping and leaks while ensuring the necessary humidity. Additionally, it reduces running costs associated with steam humidification and features a structure that makes it easy to implement during equipment upgrades. By not using steam, safety is also improved, contributing to the stabilization of painting quality. 【Features and Points】 ■ Achieves high humidification performance without steam *For more details, please refer to the related links or feel free to contact us.

"WETCOMII" is a high-efficiency air conditioning unit that reduces CO2 emissions and running costs by approximately 70% compared to conventional steam-based air conditioning systems by adopting a heat pump system. Since it does not use steam, there is no need for fuel-consuming boiler equipment, significantly reducing the energy required for heating and humidifying. Temperature and humidity control using heat pumps is highly stable and can secure sufficient processing capacity with less energy, enabling simultaneous reduction of environmental impact and operational costs. It has received high praise as an environmental countermeasure facility in painting booths and manufacturing sites where greenhouse gas reduction is required. 【Features】 ■ 70% reduction in CO2 and running costs compared to steam systems *For more details, please refer to the related links or feel free to contact us.

"WETCOMII" adopts a unique method that directly contacts a large amount of water with outside air, allowing for simultaneous purification of the incoming air, making it a wet air conditioning unit. It can capture dust, floating particles, and fine particles contained in the outside air by bringing them into contact with water, sending only the purified air into the interior of the air conditioning unit. In work environments such as painting booths or those requiring dust control, the quality of outside air directly affects the finish. This unit is equipped with an air purification function, which achieves high-quality air conditioning while reducing the load on external filters. 【Features】 ■ Washes outside air by contacting it with a large amount of water *For more details, please refer to the related links or feel free to contact us.

"WETCOMII" is an air conditioning unit that does not use steam, eliminating the need for boiler equipment and steam piping, and significantly reducing the occurrence of extensive maintenance. Tasks essential for steam systems, such as boiler water treatment, combustion management, regular inspections, and piping corrosion prevention, are no longer necessary, leading to substantial reductions in maintenance effort and costs. Additionally, there is no risk of equipment shutdown due to steam troubles, allowing for stable air conditioning operation. In environments like painting booths, where long hours of operation are required, high maintainability offers significant operational advantages. 【Features】 ■ No boiler required, no extensive maintenance needed *For more details, please refer to the related links or feel free to contact us.

"WETCOMII" is a wet air conditioning unit that can control the environment with very high precision of ±0.2℃ for temperature and ±2% RH for humidity. In painting booths, even slight fluctuations in temperature and humidity can affect the quality of the finish, so high-precision control capabilities are required. This unit can reproduce a stable air conditioning environment through its unique temperature and humidity control. Thanks to this precision, it can maintain a constant air condition regardless of seasonal variations or external conditions, significantly reducing the risks of uneven paint application, poor drying, and quality fluctuations. It contributes to creating a stable production environment in manufacturing sites that demand high-quality management. 【Features】 ■ High-precision control of ±0.2℃ for temperature and ±2% RH for humidity *For more details, please refer to the related links or feel free to contact us.

The "Rapid Heating Factory Heater" is a heating solution that eliminates the need for traditional air curtains that use steam or gas, thereby reducing the consumption of steam and gas in factories. Since it uses electric infrared heating, it can reduce environmental impact without using fossil fuels. Additionally, it is equipped with a human presence sensor that automatically turns off the power when no workers are present, preventing unnecessary heating and contributing to improved energy efficiency throughout the factory. It is designed not only for energy savings but also for safety and comfort. 【Features】 ■ Reduces the use of steam and gas (advancing towards steam-free and gas-free operation) *For more details, please refer to the related links or feel free to contact us.

The "Rapid Heating Factory Heater" is equipped with a human presence sensor that automatically turns off the power when no workers are present, preventing unnecessary heating. By eliminating traditional steam and gas air curtains, fuel costs associated with heating operations can also be significantly reduced. As a result, depending on the implementation case, energy costs can be reduced by up to 94%. This achieves both energy savings and a reduction in running costs, contributing to a lower environmental impact. 【Features】 ■ Up to 94% reduction in energy costs *For more details, please refer to the related links or feel free to contact us.

The "Rapid Heating Industrial Heater" is equipped with an infrared heater and has an extremely fast startup time of 1.4 seconds. It delivers warmth the moment workers enter the work area, preventing waiting times and decreases in work efficiency due to cold. With a human sensor, it automatically switches on and off according to the movement of workers, allowing for energy-saving operation that heats only the necessary areas when needed. [Features] ■ Achieves instant heating with a startup time of 1.4 seconds *For more details, please refer to the related links or feel free to contact us.

The "Rapid Heating Industrial Heater" uses infrared to directly warm workers, allowing for heating without circulating air. This enables safe use in environments that require cleanliness, such as painting booths and precision work areas, without stirring up dust or particles. Additionally, the automatic on/off control with a human presence sensor allows heating only when necessary, achieving both energy-efficient operation and comfort. 【Features】 ■ No airflow is generated, avoiding dust. *For more details, please refer to the related links or feel free to contact us.*

The "Rapid Heating Factory Heater" features a simple design that uses electricity, eliminating the need for investment in boilers and piping, allowing for low-cost implementation. It enables energy-efficient operation compared to traditional steam and gas heating while keeping initial installation costs down. Its compact size and easy installation make it simple to add to existing factories. It provides an efficient heating solution that is energy-saving and low-cost. 【Features】 ■ Can be implemented at low cost *For more details, please refer to the related links or feel free to contact us.*

The "Rapid Heating Industrial Heater" can be easily installed in narrow spaces and compact environments due to its small heat source design. Since it does not require large equipment, it can be used alongside existing facilities without disrupting the layout of the factory. As it is electric and does not use steam or gas, piping and boiler equipment are also unnecessary. Its space-saving installation ensures operational flexibility and safety. [Features] ■ Compact heat source allows for space-saving installation *For more details, please refer to the related links or feel free to contact us.*

The "Rapid Heating Industrial Heater" is equipped with infrared heaters that directly warm the workers, preventing a decline in work efficiency due to cold. With a built-in motion sensor, it can instantly heat the necessary areas even when workers move, ensuring a consistently comfortable working environment. Unlike conventional whole-room heating, it allows for energy-efficient operation since there is no need to heat the entire factory. The direct heating method contributes to improving the workplace environment and enhancing work efficiency. 【Features】 ■ Directly warms workers to achieve workplace environment improvement *For more details, please refer to the related links or feel free to contact us.*

In the manufacturing industry, maintaining a comfortable working environment for workers leads to increased productivity. Particularly in vast factory spaces or areas where workers temporarily stay, issues such as energy waste from heating the entire factory and decreased work efficiency in areas where heating is difficult to reach can arise. Our "Energy-Saving Heater with Human Sensor" addresses these challenges by directly warming the workers, efficiently heating only the necessary places at the necessary times, thus achieving waste-free operation. 【Usage Scenarios】 - Work areas within factories - Warehouses - Break spaces for workers - Areas with many openings 【Benefits of Implementation】 - Startup time of 1.4 seconds, allowing for immediate heating of the work environment - Equipped with a human sensor that automatically turns off when no one is present, further enhancing energy savings - Reduction in steam and gas usage by eliminating air curtains (varies by implementation case) - Up to 94% reduction in energy costs (varies by implementation case) - Simultaneous reduction of CO2 emissions and improvement of workplace environment

In the warehouse and logistics industry, maintaining a comfortable working environment during loading and unloading operations is essential. Particularly in large spaces or areas with frequent temperature changes due to opening and closing, proper temperature management is crucial for maintaining workers' concentration and ensuring efficient work performance. However, heating the entire factory tends to lead to high energy consumption. Our product efficiently heats only the necessary areas at the necessary times by directly warming the workers, achieving energy-saving operations without waste. 【Usage Scenarios】 - Loading and unloading areas - Workspaces within the warehouse - Areas for loading and unloading trucks 【Benefits of Implementation】 - Maintaining and improving work efficiency through enhanced worker comfort - Reducing energy costs - Decreasing CO2 emissions

In automobile factories, especially on assembly lines, maintaining the comfort and productivity of workers is crucial. In cold winter environments, there is a risk of decreased work efficiency and loss of concentration. Instead of heating the entire factory, there is a demand for creating an efficient thermal environment by delivering heat directly to the workers. Our "Energy-saving Heater with Human Sensor" starts heating instantly in 1.4 seconds and addresses these challenges by warming the workers directly. 【Usage Scenarios】 - Work areas on automobile assembly lines - Parts supply areas - Inspection and testing areas 【Benefits of Implementation】 - Maintaining productivity through improved worker comfort - Energy-saving operation that runs only when needed - Achieving both CO2 emission reduction and workplace environment improvement

In food factories, maintaining product quality and ensuring worker comfort require a hygienic environment and appropriate temperature management. In particular, temperature and humidity control is crucial in hygiene management, as improper temperatures can increase the risk of bacterial growth. Additionally, managing workers' health also impacts productivity. Our "Energy-Saving Heater with Human Sensor" has a quick startup time of 1.4 seconds and provides targeted heating in the areas where workers need it, allowing for heating only when necessary without warming the entire factory. This enables the improvement of the working environment and the maintenance of hygiene management while reducing energy consumption. 【Usage Scenarios】 - Local heating in work areas - Surroundings of manufacturing lines where temperature control is needed - Break areas for workers - Areas requiring hygiene management 【Benefits of Implementation】 - Provides a comfortable working environment by directly warming workers - Reduces unnecessary power consumption during absence with the human sensor - Decreases steam and gas usage by eliminating air curtains (depending on implementation cases) - Reduces energy costs (depending on implementation cases) - Suitable for spaces where dust avoidance is desired due to minimal air flow generation

In the precision work environment of the metal processing industry, temperature management can affect product quality. Particularly during fine machining or assembly, the perceived temperature for workers can impact their concentration and work accuracy. If the temperature in the work environment is unstable, there is a risk of reduced machining precision and the occurrence of defective products. Our "Energy-Saving Heater with Human Sensor" has a quick startup time of 1.4 seconds and efficiently heats only the necessary areas at the necessary times by directly warming the workers, providing an environment suitable for precision work. Since it uses electricity, it does not rely on fossil fuels or steam, contributing to CO2 reduction. With the human sensor, it automatically turns off when no one is present, minimizing unnecessary power consumption and achieving energy-saving operations. 【Usage Scenarios】 - Assembly lines for precision parts - Inspection areas for metal components - Cutting and polishing workspaces - Welding and assembly work areas 【Benefits of Implementation】 - Maintaining work efficiency and accuracy through improved worker comfort - Reduction in energy costs (up to 94% cut depending on the implementation case) - Reduction in CO2 emissions - Maintaining a clean work environment by minimizing dust dispersion

In chemical plants, temperature management in safe areas can affect the comfort and productivity of workers. In particular, there is a need to efficiently heat only specific areas while minimizing unnecessary energy consumption. Our "Energy-Saving Heater with Motion Sensor" has a fast startup time of 1.4 seconds and warms only the necessary places when needed, achieving both improved working conditions and energy savings. Since it uses electricity, it does not rely on fossil fuels or steam, contributing to CO2 reduction. 【Usage Scenarios】 - Safe areas within chemical plants - Waiting spaces for workers - Areas requiring localized heating 【Benefits of Implementation】 - Directly warms workers, operating only when necessary to reduce waste - Equipped with a motion sensor for automatic shut-off when unoccupied, further enhancing energy savings - With a startup time of 1.4 seconds, it can quickly heat the working environment - Achieves both CO2 emission reduction and workplace environment improvement simultaneously

In printing factories, there is a demand to shorten ink drying times and increase productivity. Particularly, delays in ink drying can lead to impacts on subsequent processes and a decline in product quality. Additionally, the waste of energy due to heating large areas is also a challenge. Our "Energy-saving heater with human sensor" starts heating immediately with a startup time of 1.4 seconds, promoting ink drying. Since it uses electricity instead of fossil fuels or steam, and heats workers directly rather than the entire factory, it enables energy-efficient operation. Furthermore, the human sensor automatically turns off when no one is present, reducing unnecessary power consumption and balancing ink drying promotion with energy savings. 【Usage Scenarios】 - Promoting ink drying around the printing line - Local heating of workers' work areas - Processes where a reduction in ink drying time is necessary 【Benefits of Implementation】 - Increased productivity due to shortened ink drying times - Reduction in energy costs - Decrease in CO2 emissions and improvement of the workplace environment

In a pharmaceutical factory, temperature management of the work environment is crucial to maintain consistent product quality. This is especially important when handling delicate pharmaceuticals or in manufacturing processes that require specific temperatures, where maintaining a stable thermal environment is essential. Inadequate temperature management can lead to product degradation and a decline in quality. Our "Energy-Saving Heater with Human Sensor" heats the work environment instantly in 1.4 seconds and automatically turns off when no one is present, achieving an energy-efficient operation without waste. This contributes to both CO2 reduction and improvement of the work environment, supporting the maintenance of quality in pharmaceutical factories. 【Usage Scenarios】 - Direct heating for workers on the production line - Temperature maintenance in quality control areas - Temperature management in pharmaceutical storage areas 【Benefits of Implementation】 - Quality maintenance through stabilization of the work environment - Reduction in energy costs - Decrease in CO2 emissions

In electronic component factories, it is essential to suppress the generation of static electricity and maintain product quality. Particularly in environments handling delicate electronic components, temperature management and static electricity countermeasures are crucial. Inadequate temperature management or the occurrence of static electricity can lead to component failure or performance degradation. Our "Energy-Saving Heater with Human Sensor" warms the workers directly, eliminating the need to heat the entire factory and allowing operation only when necessary, thus achieving efficient heating. This not only aids in static electricity countermeasures but also enables energy-efficient operations. 【Usage Scenarios】 - Electronic component manufacturing lines - Inspection and assembly areas - Workspaces requiring static electricity countermeasures 【Benefits of Implementation】 - Contribution to work efficiency through improved comfort for workers - Energy savings by operating only when needed - Reduction of CO2 emissions

In the wood processing industry, temperature management of the work environment is crucial for drying and storage. Especially in areas where workers perform tasks for extended periods, inadequate temperature control can lead to decreased work efficiency and negatively impact the quality of the wood. Instead of heating the entire factory, it is essential to provide direct heating for workers to achieve efficient heating and create a comfortable working environment. Our rapid heating factory heater has a short startup time of 1.4 seconds, allowing for immediate heating of the work environment. [Usage Scenarios] - Work in the wood drying area - Work in the wood storage area - Waiting space for workers [Benefits of Implementation] - Maintaining work efficiency through improved comfort for workers - Reducing energy costs - Decreasing CO2 emissions

In a painting booth, it is essential to shorten the drying time of the paint and enhance work efficiency. In particular, uniform drying is crucial for maintaining product quality. Inadequate drying can lead to rework or a decline in quality. Our rapid heating factory heater starts heating instantly in 1.4 seconds, contributing to the drying process within the painting booth. Since it uses electricity, it operates in an energy-efficient manner by directly heating the workers instead of warming the entire factory, without using fossil fuels or steam. With a built-in human sensor, it automatically turns off when no one is present, reducing unnecessary power consumption. 【Usage Scenarios】 - Promoting drying in the painting booth - Improving worker comfort - Reducing energy costs 【Benefits of Implementation】 - Reduction in steam and gas usage by eliminating air curtains - Up to 94% cut in energy costs (depending on the implementation case) - Further energy savings with the human sensor - Immediate heating capability with a startup time of 1.4 seconds - Compact yet powerful, high-density heat source

In the automotive manufacturing industry, uniform coating formation during the painting process and maintaining the quality of the finish are extremely important. In particular, fluctuations in temperature and humidity can affect the drying state and adhesion of the coating, potentially leading to a decline in quality. Additionally, the maintenance and management of boiler equipment and steam piping can pose challenges in terms of cost and safety. Our "WETCOMII" addresses these challenges by providing a high-efficiency and high-performance temperature and humidity control function as a wet air conditioning system that does not use steam or gas, contributing to the improvement of painting quality. 【Usage Scenarios】 - Temperature and humidity management in the painting booth - Temperature and humidity adjustment during outside air intake - Stabilization of painting quality 【Benefits of Implementation】 - Achieves high humidification performance without steam - Improved economic and environmental aspects through heat pump systems - Air cleaning effect due to contact with large amounts of water - Reduced maintenance burden on boilers and piping components

In the field of aerospace precision painting, maintaining uniform painting quality and a stable working environment is essential. In particular, precise control of temperature and humidity is indispensable for the formation of fine paint films and the use of special coatings. If these factors are not met, it can lead to quality issues such as paint unevenness and poor adhesion. Our 'WETCOMII' is a temperature and humidity control air conditioning unit that meets the needs of such precision painting. 【Usage Scenarios】 - Precision painting booths for aircraft parts - Painting lines for space equipment - Painting of precision instruments requiring high-quality paint films 【Benefits of Implementation】 - Achieves a stable humidity environment with high humidification performance without using steam - Contributes to economic efficiency and reduced environmental impact through a heat pump system - Air purification effect from contact with large amounts of water - Reduces maintenance burden on boilers and piping systems

In the furniture manufacturing industry, managing the air environment during the painting process is crucial for maintaining the aesthetic quality of products. In particular, controlling the drying of paint, suppressing the emission of volatile organic compounds (VOCs), and ensuring a comfortable working environment are essential for creating high-quality furniture. Inadequate air conditioning management can lead to issues such as uneven paint application, poor drying, impacts on worker health, and challenges in complying with environmental regulations. Our 'WETCOMII' provides high-efficiency and high-performance air conditioning without steam or gas, optimizing the environment of the painting booth. 【Usage Scenarios】 - Temperature and humidity management within the painting booth - Promotion of uniform paint drying - Reduction of environmental impact through VOC emission suppression - Improvement of working environment comfort 【Benefits of Implementation】 - Achieves high humidification performance without steam, stabilizing the drying condition of the paint. - Balances economic and environmental considerations through a heat pump system. - Cleans the air by coming into contact with large amounts of water, maintaining a clean environment. - Eliminates the need for extensive maintenance of boilers and piping components, reducing management burdens.

In the manufacturing process of home appliances, maintaining the quality of appearance is a crucial factor that directly impacts product reliability and brand image. Particularly in the painting process, stable management of temperature and humidity is required to ensure uniform painting quality. Inadequate air conditioning management can lead to uneven paint application and poor drying, resulting in defects in the product's appearance. Our 'WETCOMII' addresses these challenges by providing a stable air conditioning environment. 【Usage Scenarios】 - Temperature and humidity management in the painting booth - Standardization of product appearance quality - Stable operation of the manufacturing line 【Benefits of Implementation】 - Achieves high humidification performance without steam - Improves economic and environmental efficiency with a heat pump system - Cleans the air by coming into contact with large amounts of water - Eliminates the need for extensive maintenance of boilers and piping components

In the building materials industry, proper temperature and humidity management during the manufacturing process is essential for maintaining product quality and improving durability. Particularly in the painting process, uniform drying and curing of the paint film significantly affect the long-term performance of the product. Painting in inappropriate environmental conditions can lead to peeling and degradation of the paint film, potentially shortening the product's lifespan. Our 'WETCOMII' provides an optimal air conditioning environment that contributes to the durability of building materials, featuring high humidification performance and temperature and humidity control without steam or gas. 【Usage Scenarios】 - Temperature and humidity management in the painting process of building materials - Promotion of uniform drying and curing of the paint film - Maintenance of product quality and improvement of durability 【Benefits of Implementation】 - Achieves high humidification performance without steam, reducing issues like paint film cracking - Enhances economic and environmental efficiency through a heat pump system - Cleans the air by coming into contact with large amounts of water, providing a clean environment - Eliminates the need for extensive maintenance of boilers and piping components

In the medical device industry, strict hygiene management is required to ensure product quality and safety. In particular, the cleanliness of the air and the management of temperature and humidity in the manufacturing environment are extremely important, as they directly affect the performance and durability of the products. Inadequate air conditioning management can increase the risk of product contamination and deterioration. Our "WETCOMII," a wet air conditioning unit that does not use steam or gas, addresses these challenges and contributes to maintaining a stable and hygienic manufacturing environment. 【Usage Scenarios】 - Management of temperature, humidity, and air cleanliness in clean rooms - Maintenance of a hygienic environment on the production line - Manufacturing processes for delicate medical devices 【Benefits of Implementation】 - Achieves high humidification performance without steam, enabling stable humidity management - Balances economic efficiency and reduced environmental impact through a heat pump system - Cleans the air by coming into contact with large amounts of water, improving cleanliness - Eliminates the need for extensive maintenance of boilers and piping components

In the plastic molding industry, surface treatment requires the maintenance of uniform painting quality and improvement of the working environment. In particular, the management of temperature and humidity during painting significantly affects the finish and increases the risk of defective products. Additionally, conventional air conditioning systems may impose a burden due to the capital investment and maintenance required for equipment that uses steam or gas. Our 'WETCOMII' provides an optimal solution to these challenges as a high-efficiency and high-performance temperature and humidity control air conditioning unit that operates without steam or gas. 【Usage Scenarios】 - Painting booths for plastic products - Temperature and humidity management in surface treatment processes - Environmental maintenance in clean rooms 【Benefits of Implementation】 - Achieves high humidification performance without steam - Improves economic and environmental aspects through a heat pump system - Cleansing effect on air due to contact with large amounts of water - Reduces maintenance burden on boilers and piping components

In the metal processing industry, especially in anti-corrosion painting, stabilizing paint quality and maintaining the working environment are emphasized. Uneven paint application and poor drying directly lead to a decline in product quality, while a deteriorating work environment can negatively impact employee health and productivity. In response to these challenges, our 'WETCOMII' provides stable temperature and humidity control and high humidification performance as a wet air conditioning unit that does not use steam or gas, optimally maintaining the environment within the painting booth. 【Usage Scenarios】 - Anti-corrosion painting booth for metal parts - Painting drying process - Humidity and temperature management of the working environment 【Benefits of Implementation】 - Achieves high humidification performance without steam - Improved economic and environmental efficiency through heat pump systems - Cleans dust from the air, enhancing paint quality - Reduces maintenance burden on boilers and piping systems

In the woodworking industry, proper temperature and humidity management is essential for maintaining wood quality and improving the finish in the painting process. In particular, stable air conditioning is crucial to prevent warping and cracking of wood and to ensure even drying of paint. Inadequate air conditioning can lead to wood deterioration and uneven paint application, resulting in a decline in product quality. Our 'WETCOMII' achieves high humidification performance without steam or gas, supporting wood protection and enhancing painting quality. 【Usage Scenarios】 - Wood painting booths - Wood drying processes - Wood storage areas 【Benefits of Implementation】 - Achieves high humidification performance without steam, reducing drying and cracking of wood - Improves economic and environmental efficiency through a heat pump system - Cleans the air and maintains a clean painting environment - Reduces maintenance burden for boilers and piping components

In the printing industry, uniform temperature and humidity control during the ink drying process significantly affects product quality. In particular, poor ink fixation and uneven drying not only compromise the finish of printed materials but also lead to increased costs due to rework. Additionally, traditional drying methods may involve the use of steam or gas, which can be cumbersome to manage and maintain. Our product, 'WETCOMII', addresses these challenges as a high-efficiency and high-performance air conditioning unit that operates without steam or gas. 【Usage Scenarios】 - Drying area of printing machines - Drying process of inkjet printers - Post-processing of various printed materials 【Benefits of Implementation】 - Achieves high humidification performance without steam, supporting ink drying - Improves economic and environmental efficiency through a heat pump system - Cleans the air by coming into contact with large amounts of water, providing a clean environment - Eliminates the need for extensive maintenance of boilers and piping components

In the electronic components industry, measures against static electricity in the manufacturing process are essential for maintaining product quality. Static electricity can cause malfunctions or damage to fine components, requiring strict management. Particularly in the painting process, a clean environment and proper humidity control are crucial. Our 'WETCOMII' achieves high humidification performance without using steam or gas, providing a clean air conditioning environment that supports static electricity measures in electronic component manufacturing. 【Usage Scenarios】 - Painting booths for electronic components - Humidity and temperature management in clean rooms - Manufacturing lines where suppression of static electricity generation is desired 【Benefits of Implementation】 - Achieves high humidification performance without steam - Improved economic and environmental efficiency through heat pump systems - Air purification effect from contact with large amounts of water - Reduced maintenance burden on boilers and piping components