日本テキサス・インスツルメンツ List of Products and Services

The OPAx388 series high-precision operational amplifiers have very low noise, fast settling times, zero drift, and zero crossover devices, and they operate with rail-to-rail input and output. These features, along with excellent AC performance, an offset of just 0.25µV, and a drift coefficient of 0.005µV/°C across the temperature range, make them ideal for driving high-precision analog-to-digital converters (ADCs) and buffering outputs of high-resolution digital-to-analog converters (DACs). These designs provide excellent performance when driving analog-to-digital converters (ADCs) without degradation in linearity. 【Features】 ■ Very low offset voltage: ±0.25µV ■ Zero drift: ±0.005µV/°C ■ Zero crossover: 140dB CMRR, true RRIO ■ Low noise ■ No 1/f noise: 140nVPP (0.1Hz to 10Hz) *For more details, please contact us.

• Amplifier
• Other semiconductors

The INA1650 SoundPlus audio line receiver achieves an extremely high common-mode rejection ratio (CMRR) of 91dB while maintaining a very low THD+N of -120dB at 1kHz with a 22dBu signal level. The excellent CMRR performance is realized due to the precise matching of on-chip resistors, which far exceeds that of external components, and the immunity to mismatches caused by printed circuit board (PCB) layout. Unlike other line receiver products, the CMRR of the INA1650 is characterized across the entire temperature range and tested in production environments, ensuring consistent performance across a wide range of applications. 【Features】 ■ High common-mode rejection: 91dB (typical) ■ High input impedance: 1MΩ differential ■ Very low noise: -104.7dBu, unweighted ■ Wide bandwidth: 2.7MHz ■ Low quiescent current: 10.5mA (typical) *For more details, please contact us.

• Amplifier
• Other semiconductors

The ADS8588S device is an integrated data acquisition (DAQ) system with 8, 6, or 4 channels, based on a 16-bit successive approximation register (SAR) A/D converter (ADC). All input channels are sampled simultaneously, achieving a maximum throughput of up to 200kSPS per channel. The device features a complete analog front end for each channel, including a programmable gain amplifier (PGA) with high input impedance (1MΩ), input clamps, low-pass filters, and ADC input drivers. **Features** - Built-in 16-bit ADC in the analog front end - Simultaneous sampling of 8, 6, or 4 channels - Pin-programmable bipolar inputs: ±10V and ±5V - High input impedance: 1MΩ - 5V analog supply: I/O supply from 2.3V to 5V - 7kV ESD overvoltage input clamp *For more details, please contact us.*

• converter

The PGA460 device is a highly integrated system-on-chip ultrasonic transducer driver and signal conditioner, featuring an advanced DSP core. This device includes a complementary low-side driver pair, allowing it to drive transducers using either a boost transformer-based topology or a direct drive topology with external high-side FETs. The device can receive and condition reflected echo signals, enabling reliable object detection. This functionality is achieved using an analog front end (AFE), which consists of a low-noise amplifier and a subsequent programmable time-varying gain stage that supplies signals to the ADC. **Features** - Fully integrated solution for ultrasonic sensing - Low-noise receiver with programmable 6-point time-varying gain - Built-in DSP for echo envelope detection (BPF, demodulation) - Object detection with 12-point time-varying threshold and two presets *For more details, please contact us.*

• Other semiconductors
• Sensors
• Software (middle, driver, security, etc.)

The DRV832x family of devices is an integrated gate driver for three-phase applications. This device includes three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The product generates the appropriate gate drive voltage for the high-side MOSFET using an integrated charge pump and for the low-side MOSFET using a linear regulator. The smart gate drive architecture has the capability of sourcing up to 1A and sinking peak gate drive currents of 2A. It operates from a single supply and supports a wide input supply voltage range of 6 to 60V for the gate driver and 4 to 60V for the optional buck regulator. 【Features (excerpt)】 ■ Triple half-bridge gate driver - Drives high-side and low-side N-channel MOSFETs ■ Smart gate drive architecture - Adjustable slew rate control ■ Integrated gate driver power supply ■ Operating voltage range of 6V to 60V *For more details, please contact us.

• converter
• Software (middle, driver, security, etc.)
• DC Motor

The ISOW784x is a high-performance quad-channel reinforced digital isolator family with an integrated high-efficiency power converter. The built-in DC/DC converter supplies up to 650mW of isolated power with high efficiency and can be configured for various input and output voltage levels. As a result, using these devices eliminates the need for an additional isolated power supply in space-constrained isolation designs. Additionally, devices in the ISOW784x family achieve high electromagnetic immunity and low radiation while simultaneously isolating CMOS or LVCMOS digital I/O. **Features** - Integrated high-efficiency DC/DC converter and on-chip transformer - Wide input power range of 3V to 5.5V - Regulated 5V or 3.3V output - Maximum output power of 0.65W - 5V to 5V, 5V to 3.3V: Available load current ≥ 130mA - 3.3V to 3.3V: Available load current ≥ 75mA *For more details, please contact us.*

• Other semiconductors
• Dedicated IC

The INA240 is a current sense amplifier with voltage output that can detect the voltage drop across a shunt resistor over a wide common-mode voltage range of -4V to 80V, independent of the supply voltage, thanks to its enhanced PWM rejection feature. Due to the negative common-mode voltage, the device can operate at potentials lower than ground and can accommodate the flyback period of standard solenoid applications. With enhanced PWM rejection, it suppresses large common-mode transient voltages (ΔV/Δt) at high levels in systems using pulse width modulation (PWM) signals. This feature allows for accurate current measurement without large transient voltages or associated output voltage recovery ripple. 【Features】 ■ Enhanced PWM rejection ■ Excellent CMRR ■ Wide common-mode voltage range: -4V to 80V ■ Accuracy ・ Gain error: 0.20% (maximum) ・ Gain drift: 2.5 ppm/°C (maximum) *For more details, please contact us.

• Amplifier
• Other semiconductors

The DAC8775 is a quad-channel, high-precision 16-bit digital-to-analog converter (DAC) with all functions integrated, employing adaptive power management and designed to meet the requirements of industrial control applications. When the adaptive power management circuit is enabled, the chip's power consumption is minimized, and when programmed for current output, the power supply voltage for the current output driver is regulated within the range of 4.5V to 32V by the built-in buck-boost converter. This circuit generates a programmable power supply voltage for the voltage output stage. Additionally, it includes an LDO to generate a digital power supply (5V) from a single power pin. **Features** - Adaptive power management - Single power pin supporting a wide voltage range (12V to 36V) - ±0.1% FSR total unadjusted error (TUE) - DNL: ±1 LSB (maximum) - Built-in 5V reference voltage (maximum 10ppm/°C) *For more details, please contact us.*

• converter

The demand control ventilation system using 3D Time-of-Flight (ToF) provides a subsystem solution for measuring the number of people in a specific area with high resolution and accuracy, utilizing a 3D ToF image sensor and tracking/detection algorithms. This sensor technology allows for highly advanced integration while keeping system costs low. The ToF image sensor processes visual data in three dimensions, accurately detecting the shape of humans and tracking their movements and positions with extremely high precision, without missing even slight changes in movement. Therefore, ToF cameras can achieve real-time counting and tracking of people far more effectively than traditional surveillance cameras and video analysis. 【Features】 ■ Accuracy: Over 90% ■ Configurable response time ■ Real-time or periodic occupancy data available ■ Wide field of view: H74.4º x V59.3º *For more details, please contact us.

• Sensors
• Sensors

The TPA3128D2 device is a high-efficiency stereo digital amplifier power stage that can drive speakers up to 60W/2Ω in PBTL mode. It has low idle power loss, which can extend the battery life of Bluetooth/wireless speakers and other battery-powered audio systems. Additionally, due to its high efficiency, it can output 2×30W without an external heat sink on a dual-layer PCB. Furthermore, it is equipped with short-circuit protection, thermal protection, and over-voltage, under-voltage, and DC protection, providing complete protection against faults. Faults are reported back to the processor, preventing damage to the device in overload situations. 【Features】 ■ Supports multiple output configurations ■ Wide voltage range: 4.5V to 26V ■ Efficient Class-D operation ■ Multiple switching frequencies ■ High PSRR feedback power stage architecture reduces PSU requirements ■ Programmable power limit *For more details, please contact us.

• Amplifier
• Other semiconductors

The INA260 is a digital output current, power, and voltage monitor equipped with an I2C and SMBus compatible interface, and it has a built-in high-precision shunt resistor. Regardless of the supply voltage, it enables high-precision current and power measurements, as well as overcurrent detection, with a common-mode voltage range of 0V to 36V. This device is a bidirectional, low-side or high-side current shunt monitor that measures the current flowing through its internal current sensing resistor. Due to the built-in high-precision current sensing resistor, it offers calibration-equivalent measurement accuracy, has a very low temperature drift coefficient, and ensures that an optimized Kelvin layout for the sensing resistor is always achieved. 【Features】 ■ Built-in high-precision shunt resistor ■ Detects bus voltage from 0V to 36V ■ High-side or low-side sensing ■ Reports current, voltage, and power ■ Configurable averaging options *For more details, please contact us.

• Amplifier
• Other semiconductors

The USB Type-C/Power Delivery (PD) Mini Dock Evaluation Module (EVM) provides a comprehensive reference solution for USB Type-C docks that support audio, USB data, power, and video. This EVM is in a compact (2x4 inch) form factor and supports source/sink power functionality through a USB Type-C PD compliant primary port. The video output supports DisplayPort and HDMI. 【Features】 ■ From DisplayPort to HDMI ■ Bidirectional power delivery functionality ■ DRP (Dual Role Port) full-featured USB Type-C and PD port ■ Dual video (up to 4K) via HDMI or miniDP ■ Flash updates via USB Type-C *For more details, please contact us.

• Other power sources
• Embedded Board Computers

The 54mΩ, 60V N-channel FemtoFET MOSFET technology 'CSD18541F5' is designed and optimized for many industrial load switch applications with space constraints, minimizing the footprint. By replacing standard small signal MOSFETs with this technology, the footprint size can be significantly reduced. 【Features】 ■ Low on-resistance ■ Extremely low Qg and Qgd ■ Ultra-small footprint: 1.53mm × 0.77mm ■ Low profile: height 0.35mm ■ RoHS compliant *For more details, please contact us.

• Transistor

The CSD15380F3 is a 20V, 990mΩ, N-channel FemtoFET MOSFET designed and optimized to minimize footprint for many handheld and mobile applications. Due to its very small capacitance, it can perform switching at high speeds. When used in data line applications, its low capacitance helps minimize noise coupling. Replacing standard small signal MOSFETs with this technology can significantly reduce the footprint. 【Features】 ■ Very low CiSS and COSS ■ Very low Qg and Qgd ■ Ultra-small footprint: 0.73mm x 0.64mm ■ Ultra-thin profile: maximum height 0.35mm ■ Lead and halogen-free ■ RoHS compliant *For more details, please contact us.

• Transistor

The LM53603 buck regulator is a product specifically designed for industrial and automotive applications at 12V, supplying variable outputs from 3.3V to 10V at 3A from a maximum input voltage of 36V. With advanced high-speed circuitry, this device can regulate inputs up to 20V and outputs 5V at a switching frequency of 2.1MHz. Its innovative architecture allows it to regulate 3.3V output from an input voltage as low as 3.5V. An open-drain reset output with filtering and delay can indicate the true state of the system. This feature eliminates the need for additional supervisor components, reducing costs and board space. 【Features】 ■ Maximum load current: 3A ■ Input voltage range: 3.5V to 36V, maximum transient voltage: up to 42V ■ Adjustable output voltage range: 3.3V to 10V ■ Fixed switching frequency: 2.1MHz ■ Output voltage tolerance: ±2% ■ Junction temperature range: -40°C to 150°C *For more details, please contact us.

• converter
• Switching Power Supply

The TPS63027 is a high-efficiency buck-boost converter with low quiescent current, suitable for applications where the input voltage is either higher or lower than the output voltage. The output current can reach up to 2A in boost mode and up to 4A in buck mode. The maximum average current in the switch is limited to a standard value of 4.5A. It automatically switches between buck and boost modes depending on the input voltage, regulating the output voltage across the entire input voltage range and ensuring seamless transitions between modes. This buck-boost converter is based on a fixed frequency pulse width modulation (PWM) controller and achieves maximum efficiency using synchronous rectification. When the load current is low, the converter enters power-save mode, maintaining high efficiency across the entire load current range. 【Features】 ■ True buck or boost operation with automatic and seamless switching between buck and boost modes ■ Input voltage range: 2.3V to 5.5V ■ Output voltage range: 1.0V to 5.5V ■ Continuous output current of 2A: VIN ≥ 2.5 V, VOUT = 3.5V ■ Standard switching frequency of 2.5MHz *For more details, please contact us.

• Switching Power Supply
• converter

The TPS3890 is a high-precision voltage supervisor with low quiescent current, capable of monitoring a minimum system voltage of 1.15V. It asserts an open-drain RESET signal when the SENSE voltage drops below the preset threshold or when the manual reset (MR) pin goes low. The RESET output remains low for a user-defined delay time even after the SENSE voltage and manual reset (MR) return above their respective thresholds. The reset delay time can be set in the range of 40μs to 30s by connecting an external capacitor to the CT pin. With a very low quiescent current of 2.1μA and supplied in a compact 1.5mm x 1.5mm package, it is suitable for battery-powered applications and those with limited board space. **Features** - Equipped with a power-on reset (POR) generator - Adjustable delay time from 40μs to 30s - Very low quiescent current: 2.1μA (typical) - High threshold accuracy: 1% (maximum) *For more details, please contact us.*

• Other power sources
• Other semiconductors
• Power Monitoring Equipment

The "TPSM84A21" is an easy-to-use integrated power solution that incorporates a 10A DC/DC synchronous rectification buck converter, the "TPS54A20," along with power MOSFETs, shielded inductors, input and output capacitors, and passive components, all housed in a low-profile package. This comprehensive power solution operates with just one resistor to set the voltage, eliminating the need for loop compensation or selection of magnetic components in the design. Standard applications do not require additional input or output capacitors and operate with just one external resistor to set the output voltage. With a PCB footprint of 9×15mm, it can be easily soldered onto printed circuit boards, enabling compact and low-profile point-of-load designs. 【Features】 ■ Fully integrated power solution with built-in input and output capacitors ■ Operates with a single voltage-setting resistor ■ Ultra-fast load step response ■ Up to 88% efficiency ■ 1% output voltage accuracy *For more details, please contact us.

• Other power sources
• Other semiconductors

The TPS7A91 is a low-noise (4.7µVRMS), low dropout (LDO) voltage regulator that can supply 1A, with a maximum dropout of just 200mV. The output can be adjusted from 0.8V to 5.2V using external resistors. The TPS7A91 supports a wide input voltage range, operating from a minimum of 1.4V to a maximum of 6.5V. This product is designed to power noise-sensitive components in applications such as high-speed communications, video, medical, and test and measurement. With an output noise of just 4.7µVRMS and a wide bandwidth PSRR (40dB at 1MHz), phase noise and clock jitter are minimized. 【Features】 ■ 1.0% accuracy across line, load, and temperature ranges ■ Low output noise: 4.7µVRMS (10Hz to 100kHz) ■ Low dropout: 200mV (maximum) at 1A ■ Wide input voltage range: 1.4V to 6.5V ■ Wide output voltage range: 0.8V to 5.2V *For more details, please contact us.

• Other power sources
• Dedicated IC

The LM5166 is a compact and easy-to-use synchronous rectification buck converter with ultra-low IQ, operating from 3V to 65V, maintaining high efficiency across a wide range of input voltages and load currents. It features high-side and low-side power MOSFETs, capable of supplying up to 500mA of output current with a fixed output voltage of 3.3V or 5V, or a variable output voltage. This converter is designed to simplify implementation while optimizing performance for the target application. To optimize efficiency at light loads, a Pulse Frequency Modulation (PFM) mode can be used, while a Constant-On-Time (COT) control method allows for operation at nearly constant frequency. Neither control method requires loop compensation, achieving excellent line and load transient response and enabling short PWM on-times for high buck conversion ratios. **Features** - Wide input voltage range of 3V to 65V - Quiescent current at no load: 9.7µA - Junction temperature range: -40°C to 150°C - Compliant with EN55022 and CISPR 22 EMI standards - Built-in 1Ω PFET buck switch *For more details, please contact us.*

• converter
• Switching Power Supply

The LM3405 is a 1A constant current buck LED driver designed to provide a simple and highly efficient solution for driving high-power LEDs. It features a 0.205V reference voltage feedback control to minimize power consumption, allowing the current to be set with a single external resistor for driving various types of LEDs. The switching frequency is internally set to 1.6MHz, enabling the use of small surface-mount inductors and capacitors. With current mode control and internal compensation, it is user-friendly and achieves predictable, high-performance regulation across a wide range of operating conditions. This device has a maximum input voltage of 15V and can drive up to three high-brightness LEDs in series with a forward current of 1A, with the forward voltage of a single LED being approximately 3.7V. **Features** - VIN operating range: 3V to 15V - Drives up to five high-brightness LEDs in series at 1A - Thin SOT-6 package - Switching frequency: 1.6MHz - LED enable and PWM dimming via EN/DIM input - 300mΩ NMOS switch *For more details, please contact us.*

• Dedicated IC
• Software (middle, driver, security, etc.)
• Other power sources

The TPS74401 low dropout (LDO) linear regulator is an easy-to-use and robust power management solution for a wide range of applications. The soft start is user-programmable, allowing for a reduction in capacitive inrush current during startup, minimizing stress on the input power supply. The soft start is monotonic and suitable for powering many types of processors and application-specific integrated circuits (ASICs). With the enable input and power good output, sequencing with external regulators can be easily performed. This high flexibility allows for the creation of solutions that meet the sequencing control requirements for applications such as FPGAs, DSPs, and other special startup conditions. **Features** - Input voltage range: 1.1V to 5.5V - 1% accuracy across the entire input voltage range, all loads, and all temperature ranges - Supports low input voltage of 0.9V with an external bias supply - Adjustable output: 0.8V to 3.6V - Ultra-low dropout: 115mV at 3.0A (typical) *For more details, please contact us.*

• Other power sources
• Dedicated IC
• Other semiconductors

The TLV61046A is a highly integrated boost converter designed for applications such as PMOLED panels, LCD bias power supplies, and sensor modules. It includes a 30V power switch, input/output isolation switch, and rectifier diode. It can output up to 28V from a single lithium-ion battery or two alkaline batteries connected in series. It operates at a switching frequency of 1.0MHz, allowing for the use of small external components. This product features the ability to set the output voltage to a default of 12V internally by connecting the FB pin to the VIN pin. **Features** - Input voltage range: 1.8V to 5.5V, with a minimum of 1.6V after startup - Output voltage: up to 28V - Built-in power diode and isolation switch - 980mA (typical) switch current - Efficiency at 3.6V input / 12V output: up to 85% *For more details, please contact us.*

• Switching Power Supply
• converter

The LM5170-Q1 controller achieves high voltage and high precision essential for dual-channel bidirectional converters in automotive 48V and 12V dual battery systems. It regulates the average current flowing between the high voltage and low voltage ports in the direction specified by the DIR input signal. The current regulation level is programmed via analog or digital PWM input. With dual-channel differential current sensing amplifiers and dedicated channel current monitors, a current accuracy of 1% at standard values is achieved. A robust 5A half-bridge gate driver drives parallel MOSFET switches, providing over 500W of power per channel. 【Features】 ■ AEC-Q100 certified for automotive applications ■ Maximum ratings of 100V HV port and 65V LV port ■ 1% accuracy bidirectional current regulation ■ 1% accuracy channel current monitoring ■ 5A peak half-bridge gate driver *For more details, please contact us.

• Switching Power Supply
• converter
• Other power sources

TIDEP0039 Reference Design is a communication Sercos III slave development platform for AM437x. It is a single system-on-chip (SoC) solution that integrates our AM437x Sitara processor family with the Sercos III media access control (MAC) layer. This product serves as a platform for Sercos III slave communication, enabling the implementation of Sercos III, a real-time communication standard specification for a wide variety of industrial automation equipment. This reference design is based on the TMDXIDK437X Industrial Development Kit (IDK). 【Features】 ■ Tested for Sercos III compliance ■ Sercos III firmware for PRU-ICSS with Sercos MAC compliant register interface ■ Downloadable BOM, schematics, design guide, and design files *For more details, please contact us.

• Other semiconductors

This development platform, aimed at Ethernet/IP slave communication, allows designers to implement the Ethernet/IP communication standard used in a wide range of industrial automation equipment. It reduces the number of external components and minimizes the board area while achieving class-leading low power consumption performance. 【Features】 ■ By using an AM335x ARM Cortex-A8 processor-based design, it eliminates the need for external ASIC/FPGA, reducing the system BOM by 30%. ■ Downloadable BOM, schematics, design guides, and design files. ■ Access to peripherals and interfaces for scalable HMI, PLC, and I/O solutions. ■ Free board support package and industrial software development kit from TI. ■ Supports other industrial communications (such as EtherCAT, PROFIBUS, PROFINET) using the same hardware. *For more details, please contact us.

• Other semiconductors

This development platform, aimed at PROFIBUS slave communication, allows designers to implement the real-time PROFIBUS communication standard used in a wide range of industrial automation devices. It achieves best-in-class low power consumption performance while reducing external components and minimizing board area. 【Features】 - By eliminating the need for external ASIC/FPGA with an AM335x ARM Cortex-A8 processor-based design, system BOM can be reduced by 40%. - Downloadable BOM, schematics, design guides, and design files. - Access to peripherals and interfaces for scalable HMI, PLC, and I/O solutions. - PROFIBUS slave certification obtained from Siemens certified test lab. - Pre-tested protocol stack for evaluation. - Free board support package and industrial software development kit from TI. - Support for other industrial communications (EtherCAT, Profinet, Ethernet/IP, etc.) using the same hardware. *For more details, please contact us.

• Other semiconductors

The TIDA-00299 reference design features a cost-optimized EtherCAT slave (dual-port) and an SPI interface for application processors. It uses the AMIC110 industrial communication processor, supporting multi-protocol industrial Ethernet and fieldbus. Additionally, it accommodates a 5V input, with a single PMIC generating all necessary rails on board. The EtherCAT slave stack can run on the AMIC110 or on an application processor using a Serial Peripheral Interface (SPI). 【Features】 ■ Passed EtherCAT slave compliance testing ■ Downloadable BOM, schematics, design guide, and design files ■ Software-programmable multi-protocol support for industrial Ethernet and fieldbus using the AMIC110 industrial communication processor *For more details, please contact us.

• Other semiconductors

The AMIC110 Industrial Communication Engine (ICE) is a development platform for industrial communication and industrial Ethernet. At the core of the AMIC110 ICE is the Sitara AMIC110 SoC, which features an ARM Cortex-A8 processor and a Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS), allowing for the integration of real-time industrial protocols without the need for ASICs or FPGAs. The AMIC110 ICE, adopting a booster pack form factor, provides an optimal solution for developing network-connected motor drives and industrial sensors and I/O for factory automation when combined with the C2000 LaunchPad. 【Features】 ■ 215MB of DDR3 and 8MB of SPI flash ■ Two 10/100 industrial Ethernet connections with external magnetic components ■ A 20-pin JTAG header that supports all types of external emulators ■ RoHS and REACH compliant *For more details, please contact us.

• Other semiconductors

The C2000 Piccolo LaunchPad compatible with InstaSPIN-FOC is a low-cost evaluation platform designed to enable immediate sensorless motor control using the InstaSPIN-FOC solution. This LaunchPad is based on the Piccolo TMS320F28027F, which features 64KB of onboard flash, eight PWM channels, eCAP, a 12-bit ADC, I2C, SPI, and UART, all integrated into dedicated ROM memory. Additionally, it can be operated in combination with various booster packs. 【Features】 ■ C2000 Piccolo F28027F microcontroller utilizing InstaSPIN-FOC technology ■ Built-in isolated XDS100v2 JTAG emulator for real-time in-system programming and debugging via USB ■ CPU reset button and programmable push button *For more details, please contact us.

• Other semiconductors

The MSP-EXP430FR5994 LaunchPad development kit is an easy-to-use evaluation module for the MSP430FR5994 microcontroller. It includes all the necessary features for developing ultra-low-power microcontroller platforms, such as an onboard debugging probe for programming, debugging, and energy measurement. The board is equipped with onboard buttons and LEDs that enable rapid integration of a simple user interface, an SD card port for interfacing with SD cards, and a supercapacitor that allows for standalone applications without external power. **Features** - The 16-bit microcontroller MSP430FR5994 is based on MSP ULP FRAM technology and includes 256KB of embedded FRAM, which is non-volatile memory. - EnergyTrace++ technology is available for ultra-low-power debugging. - 40-pin LaunchPad standard adopting the BoosterPack ecosystem. *For more details, please contact us.*

• Other semiconductors

The SimpleLink Wi-Fi CC3200 LaunchPad evaluation kit is a development platform for the CC3200 wireless microcontroller. This microcontroller is a one-chip programmable microcontroller with built-in Wi-Fi connectivity. The board features on-board emulation using an FTDI device, allowing for immediate experimentation with various sensors implemented without customization. This LaunchPad comes with driver support and a software development kit (SDK), as well as over 40 applications related to Wi-Fi protocols, internet applications, and microcontroller peripherals. 【Features】 ■ USB interface for PC connection using FTDI USB drivers ■ USB flash updates via SimpleLink programmer ■ Compatibility with other TI LaunchPads with additional features ■ Standalone development platform featuring sensors, LEDs, and push buttons *For more details, please contact us.

• Other semiconductors

SimpleLink Sub-1GHz CC1310 Wireless Microcontroller LaunchPad Development Kit is the first LaunchPad kit to support Sub-1GHz wireless, integrating long-range connectivity and a 32-bit ARM Cortex-M3 processor on a single chip. The CC1310 device is a wireless microcontroller targeting long-range low-power wireless applications, consisting of a 32-bit ARM Cortex-M3 processor and unique ultra-low power sensor controller peripheral functions. This sensor controller is ideal for interfacing with external sensors and automatically collects analog and digital data while other system functions are in sleep mode. 【Features】 ■ Support for Japan, Europe, and the United States with the same BOM and PCB design ■ Equipped with an integrated PCB trace antenna ■ LaunchPad for wireless applications compatible with Sub-1GHz wireless *For more details, please contact us.

• Other semiconductors

Using the MSP432P401R LaunchPad, you can develop high-performance applications characterized by low power consumption. This product features the MSP432P401R microcontroller, which includes a 48MHz ARM Cortex-M4F, an active power consumption of 95μA/MHz, 850nA RTC operation, and 14-bit resolution. The LaunchPad is equipped with an onboard emulator and EnergyTrace+ technology, allowing you to program and debug your projects without additional tools, as well as measure the overall energy consumption of the system. 【Features】 ■ Low power consumption, high-performance MSP432P401R microcontroller ■ 40-pin BoosterPack connector compatible with 20-pin BoosterPacks ■ Onboard XDS-110ET emulator with EnergyTrace+ technology ■ Two buttons and two LEDs for user interaction ■ Back-channel UART connects to PC via USB *For more details, please contact us.

• Other semiconductors