日本テキサス・インスツルメンツ List of Products and Services

The INA230 is a current shunt/power monitor with an I2C interface and 16 programmable addresses. It monitors both the shunt voltage drop and the bus supply voltage. Programmable calibration values, conversion times, averaging, and an internal multiplier enable direct readings of current (in amperes) and power (in watts). It detects current on a bus from 0V to +28V. It operates with a single supply voltage of +2.7V to +5.5V, with a typical supply current of 330µA. The operating temperature range is -40°C to +125°C. 【Features】 ■ Bus voltage sensing: 0V to +28V ■ High-side/low-side sensing ■ Current/voltage/power consumption reporting ■ Configurable averaging options ■ Programmable alert thresholds *For more details, please contact us.

• Other semiconductors
• Amplifier

The INA301 is a high-speed, high-precision current sense amplifier with a built-in comparator and overcurrent protection functionality. It features a high common-mode current detection amplifier and a fast comparator, measuring the voltage that develops across a current sensing resistor or current shunt resistor, and detects overcurrent conditions by comparing the measured voltage with a defined threshold limit. The threshold range can be adjusted with a single external limit-setting resistor. The current shunt monitor can measure differential voltage signals with a common-mode voltage of 0V to 36V, regardless of the supply voltage. It has an open-drain alert output, which can be configured to operate in either transparent mode (output status follows input state) or latch mode (alert output is cleared when the latch is reset). With a response time of less than 1µs, it can quickly detect the occurrence of overcurrent. It operates with a single supply voltage of 2.7V to 5.5V, with a maximum supply current of 700µA. It has an extended operating temperature range of -40°C to +125°C, and the package is an 8-pin VSSOP-10. *For more details, please contact us.

• Other semiconductors
• Amplifier

The INA300 is a 36V low-side/high-side overcurrent protection comparator. It is a current sensing comparator for overcurrent protection applications that measures the voltage across a shunt resistor and detects overcurrent by comparing that voltage to a threshold voltage input level. It measures differential voltage signals with a common mode voltage of 0V to 36V, regardless of the supply voltage. The threshold range can be adjusted with a single external setting resistor. With a selectable hysteresis function, the comparator's operation can be adjusted to accommodate a wide input signal range of 0mV to 250mV. It features an open-drain alert output that can operate in either transparent mode (output status follows input state) or latch mode (alert output is cleared when the latch is cleared). The response time is selectable, allowing for overcurrent alerts to be triggered in as little as 10µs. It operates on a single supply voltage of 2.7V to 5.5V, with a maximum supply current of 135µA. It has an extended operating temperature range of -40°C to +125°C, and is available in WSON-10 and VSSOP-10 packages. *For more details, please contact us.*

• Other semiconductors
• Amplifier

The LMH0324 is a low power consumption, dual output, adaptive cable equalizer with long transmission distance. It performs equalization of SDI data transmitted over 75Ω coaxial cables. It operates over a wide data rate range from 125Mbps to 2.97Gbps. Equipped with an active sensing circuit, it provides robust performance and enhanced resistance to variations in input signal activation amplitude. Additionally, it offers low power consumption, enabling extended transmission distances for cables, and features power management functionality that further reduces power consumption when there is no input signal. With two differential serial data outputs, it provides flexibility for fan-out buffering. The output driver includes a programmable de-emphasis function to compensate for board wiring losses at the output. *For more details, please contact us.

• Other semiconductors
• Other cable related products

The LMH1226 supports SMPTE video over IP at a maximum of 11.88Gbps and 10GbE. It is also compatible with UHD video for 4K/8K applications. The adaptive board wiring equalizer for IN1 is SFF-8431 compliant and supports both SMPTE and 10GbE data rates. The built-in reclocker attenuates high-frequency jitter and provides the best signal integrity. The reclocker's high input jitter tolerance improves timing margins. Additionally, the reclocker has an integrated loop filter, eliminating the need for a high-precision input reference clock. The non-intrusive eye monitor can measure serial data in real-time, enabling simple debugging of the system and rapid board design. *For more details, please contact us.

• Other semiconductors
• Other cable related products

The LMH1219 is a low-power dual-input/output adaptive equalizer with an integrated reclocker. It supports video over IP SMPTE video at up to 11.88Gbps and 10GbE, accommodating UHD video for 4K/8K applications. The long-distance transmission adaptive cable equalizer for IN0 performs equalization on data transmitted over 75Ω coaxial cables, operating across a wide data rate range from 125Mbps to 11.88Gbps. The adaptive board wiring equalizer for IN1 is SFF-8431 compatible and supports both SMPTE and 10GbE data rates. The integrated reclocker reduces high-frequency jitter and provides the best signal integrity. The reclocker's high input jitter tolerance improves timing margin. Additionally, the reclocker features an integrated loop filter, eliminating the need for a high-precision input reference clock. The non-intrusive eye monitor can measure serial data in real-time, enabling simple debugging of the system and rapid board design. *For more details, please contact us.

• Other semiconductors
• Other cable related products

The LMH1208 is a low-power 12G UHD-SDI dual output cable driver with an integrated reclocker. It supports SMPTE video up to 11.88Gbps and is compatible with UHD video for 4K/8K applications. The host side features an additional reclocked 100Ω driver output for monitoring and signal distribution. The programmable PCB input equalizer provides high-frequency boost and reduces inter-symbol interference (ISI) caused by PCB trace wiring. The built-in 75Ω termination and return loss compensation network on both cable driver outputs enable compliance with stringent SMPTE return loss requirements. Input signal detection determines the presence of valid signals at the cable driver input. These detection features can be used for alerts regarding system failures and to initiate power-saving mode, thereby reducing the power consumption of the cable driver. It offers selectable slew rates for a maximum data rate of 11.88Gbps. Additionally, output slew rate and amplitude can be controlled via pin, SPI, or SMBus. *For more details, please contact us.*

• Other semiconductors
• Other cable related products

The LMH0397 can be configured as an adaptive cable equalizer in input mode or as a dual cable driver in output mode. A single BNC can be used as either an input or output port, simplifying the design of HD-SDI video hardware. The built-in reclocker locks at up to 2.97 Gbps for all supported SMPTE data rates in both input and output modes. It features on-chip 75Ω termination and a return loss compensation network that meets stringent SMPTE return loss requirements. An additional 75Ω driver allows for various system functionalities, with this driver being used as a loop-through output in EQ (equalizer) mode and as a second fan-out cable driver in CD (cable driver) mode. The on-chip reclocker attenuates high-frequency jitter and fully reconstructs data using a clean low-jitter clock. This reclocker has an integrated loop filter, eliminating the need for an input reference clock. *For more details, please contact us.*

• Other semiconductors
• Other cable related products

The LMH1297 can use a single BNC as an input/output port, making it easier to design UHD video hardware. It can be configured in input mode as an adaptive cable equalizer and in output mode as a dual cable driver. The built-in reclocker automatically locks to all SMPTE data rates up to 11.88Gbps in both modes. The bidirectional I/O features on-chip 75Ω termination and return loss compensation networks, meeting SMPTE's strict return loss requirements. An additional 75Ω driver output supports various system functions. In EQ (equalizer) mode, this second 75Ω driver can be used as a loop-through output. In CD (cable driver) mode, this 75Ω driver can be used as a second fan-out cable driver. The host-side 100Ω driver can be used as a loopback output in CD mode for monitoring purposes. *For more details, please contact us.

• Other semiconductors
• Other cable related products

The LMH1228 device is a low-power 12G UHD-SDI dual-output cable driver with an integrated reclocker. It supports SMPTE video up to 11.88Gbps and is compatible with UHD video for 4K/8K applications. The extensive clock and data recovery (CDR) circuitry allows the on-chip reclocker to automatically detect and lock onto all SMPTE video rates up to 11.88Gbps. There is an additional reclocked 100Ω driver output on the host side for monitoring and signal distribution. Furthermore, the reclocker attenuates high-frequency jitter and fully reconstructs the data using a clean, low-jitter clock. Additionally, a loop filter is incorporated, eliminating the need for an input reference clock. The LMH1228 features an internal eye opening monitor, CDR lock indicator, input signal detection, and programmable pins for hardware interrupts, supporting system diagnostics and board initialization. It operates with a single 2.5V power supply. The package is a compact 5mm square 32-pin WQFN. *For more details, please contact us.*

• Other semiconductors
• Other cable related products

The DRV5033 device is a chopper-stabilized Hall effect sensor that provides a highly stable magnetic sensing solution across a wide temperature range. The analog output of 0V to 2V shows a linear response to magnetic flux density and determines the polarity of the magnetic field direction. With a wide operating voltage range of 2.5V to 38V and reverse polarity protection up to -22V, it is ideal for a wide range of industrial and consumer applications. It is equipped with internal protection features against reverse voltage, load dump, output short circuit, and overcurrent. 【Features】 ■ Linear output Hall sensor ■ Excellent temperature stability: sensitivity ±10% across the entire temperature range ■ High sensitivity options: -11mV/mT (OA), -23mV/mT (PA), -45mV/mT (RA), -90mV/mT (VA), +23mV/mT (CA), +45mV/mT (EA) ■ Supports a wide voltage range: 2.5V to 38V, no external regulator required ■ Operates over a wide temperature range: TA = -40℃ to +125℃ *For more details, please contact us.

• Other semiconductors
• Sensors

The DRV10983-Q1 EVM evaluation module (EVM) is AEC-Q100 compliant. It is ideal for low-noise fans and pumps with cost constraints and a minimal number of external components. It provides a continuous current of up to 2A, saves register settings up to 4.5A, and supplies current to the motor at a supply voltage of 6.2V and below. When the supply voltage exceeds 28V, it stops motor drive to protect the DRV10983-Q1 circuitry. This feature allows it to handle load dump conditions of up to 45V. It employs a unique sensorless control method that provides continuous sinusoidal drive, significantly reducing pure tone components generated by commutation. The motor can be directly controlled via PWM, analog, or I2C inputs. Motor speed can be simultaneously fed back through the FG pin and I2C interface. Two products are available: the sleep mode version (48μA) DRV10983Q and the standby mode version (8.5mA) DRV10983SQ. The package features improved thermal characteristics in a 24-pin HTSSOP. Evaluation modules and reference designs are also available. *For more details, please contact us.*

• Other semiconductors
• Other motors

The TIC12400-Q1 is a multi-switch detection interface (MSDI) for external switches in 12V automotive systems. It employs an integrated 10-bit ADC to monitor digital switches independently from the MCU, utilizing multi-position analog switches and comparator monitoring. The detection thresholds for the ADC and comparator are programmable, supporting various switch topologies and system non-idealities. It monitors 24 direct switch inputs, with 10 inputs configurable for switch monitoring connected to ground or battery. Six unique wet current settings can be programmed for individual inputs to support differential application scenarios. 【Features】 ■ AEC-Q100 compliant ■ Supports 12V automotive systems with overvoltage/voltage drop warning functions ■ Configurable for 10 inputs for switch monitoring connected to ground or battery, monitoring up to 24 direct switch inputs *For more details, please contact us.

• Other semiconductors
• Sensors

The OPA830 is a voltage feedback amplifier that operates with a +3V to +5V power supply and also supports operation at ±5V or +10V voltages. The input voltage range is broad, from negative voltage to +1.7V positive voltage, and by using a common emitter output, it provides an output amplitude within 25mV while driving 150Ω at any power supply voltage. With a high output drive current (±80mA) and low differential gain/phase error, it is ideal for consumer video products with a single power supply. The high gain bandwidth product (110MHz) and high slew rate (550V/μs) ensure low distortion operation, making it suitable for input buffer stages of 3V or 5V CMOS ADCs. Unlike other low-power, single-supply amplifiers, the distortion performance is improved due to the reduction in signal amplitude. The low input voltage noise of 9.2nV/√Hz supports wide dynamic range operation. It is available in the industry-standard SO-8 package and ultra-compact SOT23-5 package. 【Features】 ■ High bandwidth: 250MHz (G=+1), 110MHz (G=+2) ■ Low supply current: 3.9mA (VS=+5V) ■ Includes single supply ground in the input range *For more details, please contact us.

• Other semiconductors
• Amplifier

The TIOL111 family transceiver implements an IO-Link interface for industrial bidirectional point-to-point communication. When connected to an IO-Link master via a 3-wire interface, the master can initiate communication with remote nodes and exchange data, with the TIOL111 functioning as the physical layer for communication. It has a surge resistance of 1.2kV (500Ω) according to IEC 61000-4-5 and features built-in reverse polarity protection. The simple interface, which can be programmed via pins, allows for easy connection to the controller's circuit. Output current limits can be set using an external resistor. It is equipped with fault notification and internal protection functions against voltage drop, overcurrent, and overheating. 【Features】 ■ Power supply voltage: 7V to 36V ■ Output configurable as PNP, NPN, or IO-Link ■ Supports IEC 61131-9 COM1, COM2, COM3 data rates ■ Low residual voltage: 1.75V at 250mA ■ Current limit adjustable from 50mA to 350mA *For more details, please contact us.

• Other semiconductors

The TIOS101 device can be configured as a high-side, low-side, or push-pull driver and has built-in reverse polarity protection. It features IEC 61000-4-5 surge resistance of 1.2kV (500Ω) and allows for easy connection to controller circuits through a simple interface that can be programmed via pins. Output current limitation can be set using an external resistor. It includes fault notifications and internal protection features for voltage drop, overcurrent, and overtemperature. 【Features】 ■ Supply voltage: 7V to 36V ■ Output configurable as PNP, NPN, or push-pull ■ Low residual voltage: 1.75V at 250mA ■ Current limit can be set from 50mA to 350mA ■ Resistance to transient voltage of ±65V for less than 100μs ■ Reverse polarity protection up to 55V at VCC, OUT, and GND *For more details, please contact us.

• Other semiconductors
• Software (middle, driver, security, etc.)

The "HDC2010" achieves high-precision measurement with ultra-low power consumption. It is an integrated temperature and humidity sensor sealed in a super small WLCSP package. Since the sensing element is positioned at the bottom, it provides resistance to environmental contaminants such as dust and dirt. It is a capacitive-based sensor that incorporates new digital functions and a heating element to eliminate condensation and moisture. As a digital feature, it includes a programmable interrupt threshold that can trigger alerts and wake up the system without a microcontroller constantly monitoring the system. It is factory calibrated to a temperature accuracy of 0.2°C and a relative humidity accuracy of 2%. In addition to extensive environmental monitoring and IoT applications such as smart thermostats, smart home assistants, and wearables, it is ideal for cold chain transportation and storage of food and pharmaceuticals where freshness and temperature/humidity are critical. The package measures 1.5 x 1.5 x 0.67mm, and an evaluation module is also available. 【Features】 ■ Relative humidity range: 0% to 100% ■ Humidity accuracy: ±2% ■ Sleep current: 50nA *For more details, please contact us.

• Other semiconductors
• Sensors

The TUSB544 is a USB Type-C Alt mode redriver switch that supports data speeds of up to 8.1Gbps. It can support USB Type-C Alt mode interfaces such as DisplayPort, independent of the protocol. To compensate for losses in cables and PCB traces due to inter-symbol interference (ISI), it features receive linear equalization capabilities at several levels. It operates on a single 3.3V power supply and is available in two versions: commercial temperature range and industrial temperature range. All four lanes are reversible, making it suitable for various applications as a versatile signal conditioner. 【Features】 ■ Reversible 4-channel linear redriver that is protocol-independent, supporting up to 8.1Gbps ■ Supports USB 3.1 Gen1 for USB Type-C and is compatible with DisplayPort 1.4 as an alternate mode *For more details, please contact us.

• Other semiconductors
• Other power sources

The "TUSB212" operates with USB Low-Speed (LS) and Full-Speed (FS) signals using a technology that is currently under patent application. It compensates for ISI signal loss in the transmission channel, while the characteristics of LS and FS signals are unaffected by the "TUSB212," and HS signals are compensated. The AC and DC boost of the signals are programmable, allowing for fine-tuning of device performance for high-speed signal optimization through connectors, thus enabling compliance with USB high-speed electrical specification tests. Additionally, it is compatible with USB On-The-Go (OTG) and Battery Charging (BC) protocols. 【Features】 ■ Compatible with USB 2.0, OTG 2.0, and BC 1.2 ■ Configurable via pin strap or I2C ■ Supports LS, FS, and HS signal processing ■ Ultra-low power consumption during USB disconnection or shutdown ■ For applications with significant loss, signal gain can be selected via daisy-chain devices *For more details, please contact us.

• Other semiconductors

The "THVD1500" is a robust half-duplex RS-485 transceiver designed for industrial applications. The bus pins are resistant to high-level IEC contact discharge ESD events, eliminating the need for additional protection components at the system level. It operates on a single 5V power supply, has a wide common mode voltage range, and exhibits low input leakage at the bus pins, making it ideal for multipoint applications using long cables. Supplied in an industry-standard 8-pin SOIC package, it offers drop-in compatibility. The operating temperature range is -40°C to +125°C. 【Features】 ■ Complies with TIA/EIA-485A standard and SGCC (State Grid Corporation of China) Part 11 serial communication protocol RS-485 standard ■ Power supply voltage: 4.5V to 5.5V ■ Half-duplex RS-422/RS-485 *For more details, please contact us.

• Other semiconductors

The TLV6741 is a general-purpose CMOS operational amplifier characterized by low noise and a wide bandwidth of 10MHz. With its low noise and wide bandwidth, it is ideal for a wide range of high-precision applications that require an optimal balance of cost and performance. The input bias current supports applications with high source impedance. It is user-friendly due to its high robustness and stable unity gain, and the built-in RFI/EMI removal filter prevents phase inversion during overdrive conditions. Additionally, it features high electrostatic discharge (ESD) protection (1kV HBM). The minimum voltage is 2.25V (±1.125V), optimized for low-voltage operation, while the maximum voltage is 5.5V (±2.75V). It is a single-channel device, packaged in a small SC70-5 size. **Features** - Gain bandwidth: 10MHz - Low input bias current: 10pA - Low offset voltage: 0.15mV - Rail-to-rail output - Unity gain stable *For more details, please contact us.*

• Other semiconductors
• Amplifier

The TLV9062 is a low-voltage (1.8V to 5.5V) operational amplifier with rail-to-rail input and output, making it ideal for low-cost devices. It is also perfect for products that require a small size and high capacitive load driving. While it can drive capacitive loads of 100pF, it can easily stabilize with much higher capacitive loads due to its resistive open-loop output impedance. It operates at low voltage and has performance specifications similar to OPAx316 and TLVx31. With unity-gain stability, it can incorporate RFI and EMI removal filters, and it does not generate phase inversion, simplifying system design. It is available in micro-sized packages such as SOT553 and WSON, as well as industry-standard packages like SOIC, MSOP, SOT-23, and TSSOP. **Features** - Rail-to-rail input and output - Low input offset voltage: ±0.3mV - Unity-gain bandwidth: 10MHz - Low input bias current: 0.5pA - Low quiescent current: 538μA *For more details, please contact us.*

• Other semiconductors
• Amplifier

The ultra-low power consumption low dropout (LDO) voltage regulator TPS7A16 family offers the advantages of ultra-low quiescent current, high input voltage, miniaturization, and high thermal efficiency packaging. The TPS7A16 family features an enable pin (EN) compatible with standard CMOS logic and an open-drain active-high power good output (PG) with user-programmable delay. These pins are intended for use in microcontroller-based battery-powered applications where power rail sequencing is required. Furthermore, the TPS7A16 is ideal for generating low voltage power from multi-cell solutions, ranging from power tool packs with many cells to automotive applications. This device can not only supply a stabilized voltage rail but also maintain regulation during voltage transients. *For more details, please contact us.*

• Other semiconductors
• Other power sources

The "LP5912-Q1" is a low-noise LDO capable of supplying an output current of 500mA. Designed to meet the requirements of RF and analog circuits, this device offers low noise, high PSRR, low quiescent current, and low line/load transient response. The "LP5912-Q1" provides class-leading noise performance without the need for noise bypass capacitors or remote output capacitance placement. This device is designed to operate with a 1μF input and a 1μF output ceramic capacitor (no separate noise bypass capacitor is required). It can also be used with fixed output voltages ranging from 0.8V to 5.5V in 25mV steps. 【Features】 ■ AEC-Q100 compliant ■ Operating junction temperature range: -40 to +125℃ ■ Input voltage range: 1.6 to 6.5V ■ Output voltage range: 0.8 to 5.5V ■ Output voltage noise is 12μVrms, PSRR is 75dB at 1kHz, and quiescent current is 30μA (all typical values) *For more details, please contact us.

• Other semiconductors
• Other power sources

This -8V, 4.7mΩ, 1.5mm×1.5mm device is designed to achieve the lowest possible on-resistance and gate charge in the smallest possible footprint, while also providing excellent thermal characteristics in a very low profile. With its low on-resistance, small footprint, and low profile, this device is ideal for battery-powered applications with volume constraints. 【Features】 ■ Extremely low resistance ■ Small footprint of 1.5mm×1.5mm ■ Lead-free ■ Gate ESD protection ■ RoHS compliant *For more details, please contact us.

• Other semiconductors
• Other power sources
• Transistor

The TL494 device integrates all the functions necessary for building pulse width modulation (PWM) control circuits into a single chip. Primarily designed for power control, this device can be flexibly adjusted to suit specific applications. The TL494 device features an on-chip adjustable oscillator, dead time control (DTC) comparator, pulse steering control flip-flop, a 5V regulator with 5% accuracy, and two error amplifiers for output control circuits. 【Features】 ■ Integration of all functions required for PWM control circuits ■ Built-in two error amplifiers, variable oscillator, dead time control comparator, pulse steering control flip-flop, 5V regulator with 5% accuracy, and output control circuit ■ Output operation can be push-pull or single-ended ■ Operating temperature range: 0 to 70°C or -40 to +85°C *For more details, please contact us.

• Other semiconductors
• Other power sources
• converter

The LM8364 series is an ideal micro-power low-voltage detection circuit for use in battery-operated microprocessor-based systems, where extending battery life is a critical requirement. Threshold voltages in the range of 2.0V to 4.5V are available with an active-low open-drain output. These devices feature a very low quiescent current of 0.65μA. The series includes a high-precision voltage reference, a comparator with accurate thresholds, and built-in hysteresis to prevent unstable reset behavior, ensuring reset operation down to 1.0V with very low standby current. 【Features】 ■ Input voltage range: 1 to 6V ■ Ultra-low quiescent current: 0.65μA at VIN=2.87V ■ Threshold voltage range of 2 to 4.5V with threshold voltage accuracy of ±2.5% ■ Open-drain output ■ 5-pin SOT-23 surface mount package *For more details, please contact us.

• Other semiconductors
• Other power sources

The TPS22975 product family consists of two devices: TPS22975 and TPS22975N. Both devices are single-channel load switches that can configure the rise time to minimize inrush current. This device features an N-channel MOSFET, operates within an input voltage range of 0.6V to 5.7V, and can support a maximum continuous current of 6A. The switch is controlled by an on/off input (ON) and can be directly connected to low-voltage control signals. This product can optionally include a 230Ω on-chip load resistor for quick output discharge when the switch is turned off. 【Features】 ■ Configurable rise time to minimize inrush current ■ Input voltage range: 0.6V to VBIAS ■ VBIAS range: 2.5V to 5.7V ■ Low quiescent current: 37μA (typical) at VIN=VBIAS=5V ■ ESD performance tested based on JESD 22 ■ Operating temperature range: -40 to +105℃ ■ Package with thermal pad in an 8-pin 2mm square SON *For more details, please contact us.

• Other semiconductors
• Switching Power Supply
• switch

The UCC28881 integrates a controller and a 14Ω, 700 V power MOSFET into a single monolithic device. This device also features a built-in high-voltage current source, enabling direct startup and operation from the rectified main power supply voltage. This product belongs to the same family of devices as the UCC28880 and offers higher current handling capability. The UCC28881 has low power consumption, resulting in excellent efficiency. Common converter topologies such as buck, boost, and flyback can be constructed using a minimal number of external components. **Features** - Ideal for IoT, BA, and small appliances - Quiescent current: less than 100μA - Soft start function - Various protection features - Package is a 7-pin SOIC measuring 29.4mm² - Evaluation module and reference design are also available *For more details, please contact us.*

• Other semiconductors
• converter
• Other power sources

The UCC5320 is supplied in an 8-pin SOIC (D) package. This package has a creepage distance and clearance of 4mm, supports an isolation voltage of up to 3kVRMS, and is suitable for applications requiring basic insulation. With various options and a wide power range, the UCC5320 is suitable for motor drives and industrial power supplies. The UCC5320S features a split output that can be used to control the rise and fall times of the driver. The UCC5320M option connects the transistor gate to an internal clamp, preventing accidental power-on due to mirror current. The UCC5320E option includes UVLO2 referenced to GND2, making it easier to create bipolar power supplies. 【Features】 ■ Peak current: up to 4.3A ■ Input voltage range: 3 to 15V ■ Output driver supply voltage range: 13.2 to 33V ■ Supports isolation voltage of up to 3kVRMS ■ CMOS input *For more details, please contact us.

• Other semiconductors

The LMR23615 SIMPLESWITCHER is an easy-to-use 36V, 1.5A synchronous rectified buck regulator. With a wide input voltage range of 4V to 36V, this device is suitable for various industrial applications for power regulation from unregulated power sources. Peak current mode control is employed to achieve simple control loop compensation and cycle-by-cycle current limiting. With a quiescent current of 75μA, it is ideal for battery-powered systems. The very low shutdown current of 2μA further extends battery life. The high-accuracy enable input allows for simplified regulator control and system power sequencing. Protection features include cycle-by-cycle current limiting, hiccup mode short-circuit protection, and thermal shutdown due to excessive power consumption. 【Features】 ■ Wide applications in industrial equipment ■ Wide input voltage range: 4 to 36V ■ Peak current mode control enables simple control loop compensation and cycle-by-cycle current limiting ■ Quiescent current of 75μA, ideal for battery-powered devices *For more details, please contact us.

• Other semiconductors
• converter
• Switching Power Supply

The TPSM84205 power module is an easy-to-use integrated power solution that incorporates a 1.5A DC/DC converter, power MOSFET, inductor, and passive components into a 3-pin through-hole package. This comprehensive power solution operates by simply adding input and output capacitors, eliminating the need for loop compensation and magnetic component selection in the design process. With a standard TO-220 pin configuration, it can replace linear regulators packaged in this industry-standard size, significantly improving performance. The TPSM84205 device is much more efficient and does not require a heat sink. 【Features】 ■ Integrates a 1.5A DC/DC converter, power MOSFET, inductor, and passive components into a 3-pin through-hole package ■ Provides up to 95% high efficiency without the need for a heat sink ■ Complies with EN55022 Class B radiated standards ■ Fixed output voltage options: 3.3V, 5V, 12V *For more details, please contact us.

• Other semiconductors
• Other power sources

The LMG5200 device incorporates a GaN half-bridge power stage with an 80V, 10A driver and can be used in integrated power stage solutions utilizing enhancement-mode Gallium Nitride (GaN) FETs. This device consists of two 80V GaN FETs driven in a half-bridge configuration by a single high-frequency GaN FET driver. GaN FETs have nearly zero reverse recovery time and very low input capacitance (CISS), providing significant advantages in power conversion. All devices are mounted on a package platform that uses no bond wires, minimizing parasitic elements in the package. The LMG5200 device is supplied in a lead-free package measuring 6mm × 8mm × 2mm, making it easy to mount on PCBs. 【Features】 ■ Low power consumption ■ Ideal for isolated/non-isolated applications ■ Integrates one 80V 10A driver and two 80V 15mΩ GaN FETs ■ Gate driver capable of switching up to 10MHz *For more details, please contact us.

• Other semiconductors
• Other power sources

The TPS543C20 features an advanced current mode (ACM) control topology with internal compensation and employs a clock-synchronized fixed frequency modulator suitable for EMI-sensitive POL applications. With an internal integrator and direct amplification ramp tracking loop, the need for external compensation across a wide frequency range is eliminated, making system design flexible, high-density, and simple. Optional API and body brake significantly reduce undershoot and overshoot, improving transient performance. The integrated NexFET MOSFET with low-loss switching achieves high efficiency and delivers up to 40A in a layout-friendly thermal pad within a 5mm x 7mm PowerStack package. Stacking two TPS543C20 devices can provide up to 80A of POL. **Features** - Internal compensation emulated peak current mode control - Built-in clock-synchronized fixed frequency modulator - Output voltage range: 0.6 to 5.5V *For more details, please contact us.*

• Other semiconductors
• Switching Power Supply

The "LP8863-Q1" is a high-efficiency LED driver for automotive applications equipped with a boost controller. Six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. The brightness of the current sinks can be controlled individually or collectively via SPI or I2C interfaces. Brightness can also be globally controlled with a PWM input. The "LP8863-Q1" supports built-in hybrid PWM and current dimming, reducing EMI, extending the lifespan of LEDs, and improving overall light efficiency. 【Features】 ■ Six high-precision current sinks ■ Built-in boost/SEPIC converter ■ Wide input voltage range: 3V to 48V ■ Achieves a dimming range of 32,000:1 at a PWM frequency of 152Hz ■ Switching frequency: 300kHz to 2.2MHz *For more details, please contact us.

• Other power sources
• Dedicated IC

The CSD88584Q5DC 40V Power Block is designed for high-current motor control applications such as handheld tools, cordless garden tools, and power tools. This device leverages TI's patented stacked die technology to minimize parasitic inductance while forming a complete half-bridge in a space-saving DualCool 5mm x 6mm package with excellent thermal characteristics. The power block device features an exposed metal top surface that acts as a simple heat sink, drawing heat away from the package and dissipating it from the substrate, thereby providing excellent thermal performance for the high currents required in many motor control applications. **Features** - Minimizes conduction losses with low RDS(ON) - Forms a complete half-bridge in a 5mm x 6mm package - Exposed metal on the package top surface allows for heat dissipation, functioning as a heat sink - Minimizes parasitic inductance - Operating temperature range of -50 to 150 degrees *For more details, please contact us.*

• Other power sources
• Dedicated IC
• Other semiconductors

With a synchronous rectification NVDC battery buck-boost charging controller, it is possible to build a solution with fewer components and high efficiency for charging applications that accommodate various types of batteries while being space-constrained. The NVDC-1 configuration allows the system to be regulated to the battery voltage while maintaining the system above its minimum voltage. The system can continue to operate even if the battery is fully discharged or removed. When the load power exceeds the rated input power, the battery transitions to a supplemental mode to prevent overload of the input power source. Additionally, it charges the battery from a wide range of input power sources, including USB adapters, high-voltage USB PD sources, and traditional adapters. *For more details, please contact us.

• Other power sources
• Dedicated IC
• controller

The "TPS61178" is a 20V synchronous boost converter with an integrated gate driver for load disconnection. The "TPS61178" incorporates two low on-resistance power FETs: a 16mΩ switching FET and a 16mΩ rectifier FET. It also uses fixed frequency peak current mode control with integrated slope compensation. The "TPS61178" has the potential to isolate the output from the input side during shutdown. If a short circuit occurs at the output, it can transition to hiccup mode to reduce thermal stress and automatically recover after a short release period. 【Features】 ■ Input voltage range: 2.7 to 20V ■ Output voltage range: 4.5 to 20V ■ Programmable switch peak current: up to 10A ■ Two 16mΩ FETs integrated ■ Maximum efficiency: 96% ■ Fixed frequency peak current mode control with integrated slope compensation ■ 13-pin VQFN package measuring 3 x 3.5mm *For more details, please contact us.

• Other power sources
• Dedicated IC
• converter

The TPS61253A device is a power solution for battery-powered mobile applications. This device supports a wide input voltage range of 2.3V to 5.5V, accommodating lithium-ion battery-powered applications with an extended voltage range. You can choose from various fixed output voltage versions of 4.5V, 4.7V, 5V, and 5.2V. The TPS6125xA can supply up to 1500mA of load current from batteries discharged to as low as 3V. It operates at a switching frequency of 3.8MHz (typical) and can be flexibly configured for automatic PFM mode, forced PWM mode, and ultrasonic mode. 【Features】 ■ Two built-in FETs: 35mΩ LS-FET, 60mΩ HS-FET ■ Wide input voltage range: 2.3 to 5.5V ■ Fixed output voltages: 4.5, 4.7, 5.0, 5.2V ■ Selectable automatic PFM, forced PWM, and ultrasonic modes ■ Applications include battery-powered portable devices *For more details, please contact us.

• Other power sources
• Dedicated IC

The TPS22971 is a space-saving single-channel load switch that allows for control and adjustment of the turn-on slew rate, and it features a built-in power good indicator. This device includes an N-channel MOSFET that operates in a low input voltage range of 0.65V to 3.6V, supporting a maximum continuous current of 3A. With a low on-resistance of 6.7mΩ, power loss and voltage drop are minimized. It is controlled by an on and off input (ON) that can interface directly with low voltage control signals, connected across the load switch. **Features** - For tablets, smartphones, telecom, and storage - Input voltage range: 0.65 to 3.6V - Maximum continuous current: 3A - Quick output discharge (QOD): 150Ω (typical value) - Operating temperature range: -40 to +125°C - 8-pin DSBGA package measuring 1.9 x 0.9 x 0.5mm *For more details, please contact us.*

• Other power sources
• Dedicated IC

The AM571x Industrial Development Kit (IDK) features a Cortex A-15 operating at 1.5GHz and supports the single-core AM57x targeted at industrial applications. It also simultaneously supports 6 Ethernet ports, 2 x RGMII, and 4 x MII. It integrates industrial Ethernet and Fieldbus protocols, allowing for simultaneous operation in master/slave, master/master, or slave/slave configurations. Included are expansion ports for PCie and GPMC for high-speed parallel external interfaces, as well as a camera daughter card for machine vision applications. It comes with a 10-inch capacitive touch display option, ideal for scalable HMI applications. As a high-level operating system (HLOS), it supports low-latency deterministic TI-RTOS and RT-Linux. Additional OS support is also available from partners. *For more details, please contact us.*

• Other semiconductors

The AM572x Industrial Development Kit (IDK) is a development platform for evaluating the industrial communication and control capabilities of the Sitara AM572x processor, which is ideal for applications such as factory automation, drives, robotics, and grid infrastructure. The AM572x processor features a dual PRU-ICSS (Programmable Real-time Unit Industrial Communication Subsystem) subsystem that can be used with industrial Ethernet protocols such as Profinet, EtherCAT, and Ethernet/IP. The 'TMDXIDK5728' is equipped with six Ethernet ports, four of which can be used for connectivity. Among these, two are Gb Ethernet ports from the PRU-ICSS subsystem, while the remaining two are 10/100 Ethernet ports. *For more details, please contact us.*

• Other semiconductors

The AM437x Industrial Development Kit (IDK) is an application development platform for evaluating the industrial communication and control capabilities of the Sitara AM4379 and AM4377 processors for industrial applications. The AM4379 and AM4377 processors are ideal for industrial communication, control, and drive equipment. The AM437x processors incorporate a quad-core Programmable Real-time Unit (PRU) that utilizes real-time communication technology widely used in industrial automation equipment. It achieves best-in-class low power consumption performance while reducing the number of external components and board area. The target applications are as follows: 【Target Applications】 ■ Industrial Drives ■ Industrial Sensors and I/O Units ■ Industrial Communication Gateways ■ Programmable Logic/Automation Controllers (PLC/PAC) with built-in industrial communication such as EtherCAT and feedback functions such as EnDat *For more details, please contact us.

• Other semiconductors

The TPA3245 is a high-performance Class-D power amplifier that achieves the best sound quality with Class-D efficiency. It features advanced integrated feedback design and a unique high-speed gate driver error correction function (PurePath Ultra-HD). This technology enables excellent audio quality with very low distortion across the entire audio bandwidth. This device operates in AD mode and can drive up to 2×115W into a 4Ω load and up to 2×145W into a 3Ω load. It is equipped with two VRMS analog input interfaces that work seamlessly with high-performance DACs such as TI's PCM5242. 【Features】 ■ Differential analog input ■ Advanced integrated feedback design ■ High-speed gate driver error correction ■ Multiple configurations possible: stereo, mono, 2.1, 4xSE ■ No click or pop sounds during start-up and shut-down ■ 90% efficiency Class-D operation (4Ω) *For more details, please contact us.

• Amplifier
• Other semiconductors

The TPA3255 is a high-performance Class-D power amplifier that achieves the best sound quality with Class-D efficiency. It features an advanced integrated feedback design and a unique high-speed gate driver error correction function (PurePath Ultra-HD). This technology provides excellent audio quality with very low distortion across the entire audio band. Additionally, it achieves high power efficiency and very low idle loss of just 2.5W in the power stage. These are accomplished by using 85mΩ MOSFETs and an optimized gate driver scheme, resulting in idle losses that are significantly lower than standard discrete implementations. 【Features】 ■ Differential analog input ■ Total output power at 10% THD+N ■ Total output power at 1% THD+N ■ Advanced integrated feedback design ■ High-speed gate driver error correction ■ Multiple configurations available: Stereo, Mono, 2.1, 4xSE *For more details, please contact us.

• Amplifier
• Other semiconductors