ケーエスビー Product Lineup

KSB's "Etachrom B" is a horizontal single-stage, motor-connected centrifugal pump that uses stainless steel for the wetted parts. It is suitable for liquid transfer in a wide range of applications, including water treatment, industrial cleaning, water supply, air conditioning, and surface treatment. The performance and key dimensions comply with EN 733 standards. Its high-efficiency hydraulic design contributes to reduced power consumption. The back pull-out design allows for disassembly and maintenance without removing the pump casing from the piping. It features replaceable casing wear rings, ensuring ease of maintenance.

• Other pumps

KSB's "MegaCPK" is a chemical process pump designed for liquid transfer in a wide range of industries, including chemicals, petrochemicals, and refineries. It adopts key dimensions in accordance with ISO 2858 and a design that meets the technical requirements of ISO 5199. There are 79 combinations of impellers and casings available, allowing for selection based on the required flow rate and head. Materials can be chosen from gray cast iron, cast steel, stainless cast steel, duplex stainless cast steel, and super duplex stainless cast steel. The shaft seals accommodate various specifications, including gland packing, single and double mechanical seals, and cartridge-type mechanical seals. In addition to reducing power consumption through high-efficiency hydraulic design, its structure excels in wear resistance and maintainability, contributing to lower operating and maintenance costs. The back pull-out design also considers ease of maintenance work.

• Other pumps

The KSB "Etanorm SYT" is a horizontal single-suction centrifugal pump designed for the circulation of thermal oil and high-temperature water. It can handle mineral-based and synthetic thermal oils up to 350°C and hot water up to 180°C, making it suitable for processes in industries such as chemicals, resins, rubber, food, wood, painting, and various heating equipment that deal with high-temperature fluids. The pump features a structure that considers the thermal impact from high-temperature fluids on the bearings and seals, and it achieves stable operation under high-temperature conditions through mechanical seals, a quench system tailored to the application, and a bearing and seal structure designed for durability. Additionally, it employs a back pull-out design, allowing access to internal components without removing the pump casing from the piping during maintenance. Features: - Compatible with thermal oils up to 350°C Can also be used in high-temperature water circulation systems. - Seal and bearing structure designed for high-temperature applications - Unique air vent structure efficiently separates and discharges gas from the fluid, reducing gas retention in the mechanical seal chamber and minimizing the risk of overheating or dry running at the seal. - Supports high-efficiency operation Impeller outer diameter can be adjusted.

• Other pumps
• Special Pump

The KSB "Etaline" series is an inline centrifugal pump with suction and discharge flanges arranged on the same axis. Its compact structure makes it easy to install in piping systems, making it suitable for applications where installation space is limited, such as machine rooms and utility facilities. It adopts a high-efficiency hydraulic design, with standard impeller trimming to match the usage point. Additionally, it supports variable speed control via an inverter, allowing for efficient pump operation according to actual operating conditions. When combined with high-efficiency motors, it is said to achieve energy savings of up to 60%. The lineup includes Etaline / Etaline R / Etaline Z, covering a wide range from small to medium flow general equipment to large flow circulation equipment. Main Features: - Standard support for impeller trimming to match the usage point - Support for variable speed control via inverter - Good suction performance ensured by low NPSH design - Casing wear rings and shaft sleeves are replaceable - Impeller materials can be selected according to application, including cast iron, bronze, and stainless steel - Service and spare parts supply supported by the KSB global network

• Other pumps
• pump

Features of EtaSeco ■ Completely sealed structure without mechanical seals Thanks to the canned motor structure, there is no need for shaft sealing devices such as mechanical seals. The absence of a shaft penetration reduces the risk of external leakage of the handled liquid. ■ Long lifespan and extended maintenance intervals Utilizes durable sliding bearings and a robust structure. This reduces maintenance frequency and contributes to stable operation of the equipment and lower lifecycle costs. ■ Low noise and low vibration The integrated canned motor structure allows for quiet operation with minimized vibration. It is also suitable for cooling circuits of precision instruments and various devices. ■ Compact design A space-saving structure that integrates the pump and motor. It can be installed both horizontally and vertically, accommodating integration into limited spaces such as inside machines and equipment. ■ Inverter operation compatible Supports rotational speed control via frequency converters. Flow and pressure control can be adjusted according to equipment load. ■ Suitable for harsh installation environments Ductile cast iron with stainless steel or cationic electrodeposition coating is used depending on specifications.

• Special Pump

"Magnochem" is a horizontal, single-stage, seal-less process pump that transmits motor power to the impeller through a magnetic coupling. Since the rotating shaft does not penetrate the pump casing, it does not use mechanical seals, which are typically required in conventional shaft-sealed pumps. This reduces the risk of fluid leakage from the shaft seal area. It is suitable for a wide range of processes where minimizing external leakage is crucial, including corrosive, hazardous, flammable, and odorous fluids, as well as thermal oil, chemicals, and expensive product liquids. It can be used in various industrial sectors such as chemicals, petrochemicals, oil refining, energy, industrial circulation systems, district heating, and air conditioning equipment. [This is suitable for the following challenges] - Reducing leakage from mechanical seal areas - Safely transporting corrosive and hazardous fluids - Minimizing the risk of external leakage of flammable fluids - Avoiding the release of odorous fluids into the atmosphere - Reducing losses of expensive product liquids - Decreasing the frequency of mechanical seal replacements - Reducing pump maintenance work and downtime - Looking for a pump that can handle various fluid conditions

• Other pumps

The KSB "Ethanorm" is a single-suction centrifugal pump that caters to a wide range of applications, including water supply systems, cooling water circulation, air conditioning systems, fire protection systems, and drainage systems. It adopts a hydraulic design that achieves high efficiency, with the impeller diameter adjustable as standard to match the actual operating point. The low NPSH design ensures excellent suction performance and stable operation. Multiple shaft sealing options are available, including single mechanical seals, double mechanical seals, and gland packing, along with a rich variety of materials such as cast iron, ductile iron, stainless steel, and bronze. Furthermore, it supports variable speed control via KSB PumpDrive, pump condition monitoring through PumpMeter, and temperature and vibration monitoring with KSB Guard. By combining with an inverter-equipped motor, energy savings of up to 60% can be achieved depending on operating conditions. It can handle a maximum flow rate of 2,321 m³/h and a maximum head of 160 m, making it suitable for a wide range of industrial applications, including large flow cooling water and circulation water systems.

• Other pumps
• Other Pumps

The KSB "KNCPP" is a highly durable process pump designed for the transfer of various process fluids, including slurries and abrasive or corrosive fluids. It features an open impeller that can reliably transfer raw materials with a concentration of up to 8%. The externally adjustable wear plate maintains the clearance with the impeller, contributing to the maintenance of pump efficiency even as wear progresses. Additionally, it incorporates a robust design considering continuous operation, with features such as a self-venting casing to prevent air locks, a heavy-duty shaft, and a high-rigidity bearing support structure. The shaft seal can be selected from gland packing, single/double mechanical seals, or cartridge-type mechanical seals. It is available in cast iron and stainless steel versions to accommodate a wide range of industrial processes. **Main Features:** - Capable of transferring raw materials with a concentration of up to 8% - Suitable for slurries and abrasive/corrosive fluids - Open impeller design - Externally adjustable wear plate - Self-venting casing to prevent air locks - Improved maintenance due to back pull-out structure - Various shaft seal options available to suit different applications

• Special Pump
• Other Pumps

The Mobitech VCI is a vertical multi-stage centrifugal pump offered by KSB. Despite its compact vertical structure, it ensures high discharge pressure, making it suitable for coolant circulation and high-pressure supply in machine tools, as well as for liquid transfer applications in various industrial equipment. Due to its design, which allows the pump section to be inserted into a tank, it effectively utilizes equipment space. Additionally, by employing multiple impellers, it can accommodate a wide range of operating conditions from relatively low flow rates to high head. Leveraging KSB's global pump technology, it can be used in industrial applications that require stable continuous operation, such as machine tools, cleaning devices, and cooling equipment. It is also compatible with speed control when combined with an inverter. By adjusting the pump speed according to the required flow rate and pressure on the equipment side, it helps to suppress excessive discharge, contributing to reduced power consumption and optimization of operating conditions. Features: - High head capability due to vertical multi-stage structure - Compact design for space-saving - In-tank structure suitable for tank installation - High-efficiency multi-stage centrifugal pump design - Wide range of flow and head conditions supported - Usable as a coolant pump for machine tools - Selection can be tailored to required head by changing the number of impeller stages.

• Other pumps

"Movitec" is an energy-efficient inline multistage pump. It features ultra-hard bearings, a cast pump foot, a pump housing resistant to twisting, and a liquid-sealed O-ring, ensuring high reliability. It is equipped with a standard mechanical seal compliant with EN12756, allowing for easy and quick cartridge replacement. 【Energy Efficiency】 ■ Higher efficiency ■ Low NPSHr ■ Maximum energy efficiency achieved by PumpDrive *For more details, please download the PDF or feel free to contact us.

• Other pumps