マーポス List of Products and Services

It is a measurement system that can accommodate various applications. It can inspect gears of all sizes accurately due to its adjustable low measuring force. The M62 OBD bench is designed for easy setup changes even in field environments.

The "NVHG-EAR" is a testing machine that evaluates surface defects, machining distortions, and abnormal noise behavior in individual components by testing gears under high-speed and high-torque conditions. It operates based on the principle of a single-tooth surface test, where one master gear meshes with the component being inspected, detecting defects in both macro and micro shapes that can cause gear whine and noise phenomena. With a robust granite base frame that is unaffected by external interference and advanced software that allows for high-level settings, it can correlate EOL (End of Line) testing equipment and data. 【Features】 ■ Individual gear single-tooth surface/noise testing ■ Suitable for both gear testing environments and machining sites ■ Maximum rotational speed of 3000 rpm and maximum torque of 40 Nm during testing ■ Good correlation with gear testing analysis equipment and EoL testers ■ High-speed measurement suitable for 100% inspection *For more details, please refer to the PDF document or feel free to contact us.

The M100 is an automatic inspection system for brake discs, drums, and hubs. The system meets all dimensional and shape accuracy measurement requirements for these workpieces, and it can easily add functions for non-destructive (ND) testing, marking, or classifying the workpieces.

The M125 system is designed and manufactured using cutting-edge engineering methods, making it a highly reliable precision inspection device in factory work environments.

The new M50 system from Marpos can integrate various bench gauges. The M50 is ideal for operational inspections and final inspections, and it can perform all dimensions, shapes, and non-destructive measurements commonly conducted on brake discs, drums, and hubs.

This flexibly standardized system allows for quick setup changes and reconfiguration for different types of work without the use of special tools.

QuickSet-horizontal and QuickSet-vertical are used for multi-point measurement and shape inspection of shaft-type workpieces. QuickSet-chuck is ideal for multi-point measurement and shape inspection of workpieces that cannot be held in a V-groove or center in the horizontal direction, such as bushes, bearings, pistons, and cylindrical parts with flanges.

The "SUPER-MECLAB+.T40" is a high-precision measuring instrument for ultra-high precision outer diameter measurement of workpieces with odd and even blades/grooves. It allows for checking of workpieces with odd blades and grooves. It can be used extremely easily and quickly, reducing inspection time and improving measurement performance. Additionally, it has high flexibility and can measure various components and dimensions without the need for system presets or remastering. 【Features】 ■ Zero error due to hysteresis (reversal error) commonly seen in all dial indicator gauges ■ Non-contact measurement: does not damage or scratch the workpiece ■ Objective and highly reproducible measurement results that do not depend on the operator's skill ■ Capability to check workpieces with odd blades and grooves *For more details, please refer to the PDF document or feel free to contact us.

"SUPER-MECLAB+.X" is a high-precision measuring instrument for ultra-high precision diameter measurement. It employs NO-VAR technology, ensuring no measurement drift due to temperature changes. Through feed measurement allows for easy and quick multi-diameter measurement. Additionally, it enables checking multiple dimensions for high flexibility in measurement, allowing users to choose from various measurement types. 【Features】 ■ Capable of measuring details that cannot normally be detected ■ Can measure various components and dimensions without remastering the gauge ■ Reduces inspection time and improves measurement performance ■ Provides objective and highly reproducible measurement results that do not depend on the operator's skill ■ Non-contact measurement that does not damage or scratch the workpiece *For more details, please refer to the PDF materials or feel free to contact us.

The "WRG" allows for precise bore hole measurement and enables data transmission and reception via wireless communication. It is a product that can be installed on a typical machining center. The ATC can select the WRG gauge from the magazine just like a tool. It can be customized according to requirements and is equipped with an excellent mechanical strength and a protection system against impacts from the insertion direction. Additionally, it is available in three types according to the required size. 【Features】 ■ Direct part inspection within the machine environment ■ High-level customization to meet all customer requirements ■ Measurement of dimensions (diameter) and shape (ovalness, cylindricity) ■ Jet holes for cleaning air ■ Fully automatic cycle management *For more details, please refer to the PDF materials or feel free to contact us.

The "E9066T" is an industrial fanless computer that achieves a maintenance-free system by eliminating wear parts such as rotating fans and hard disks. By removing moving parts, it dramatically reduces typical computer failures and enhances durability and reliability. The "True Flat" front panel, integrated with a touchscreen and protection rating IP66, provides a highly reliable user interface. 【Features】 ■ Full power usage of Intel Core-i processors ■ Continuous operation in environments up to 50°C (122°F) ■ Special design with integrated heat sink ■ Eliminates traditional hard disk failures with industrial memory storage (SSD) ■ Significantly improves system performance *For more details, please refer to the PDF document or feel free to contact us.

The "M1 Multi" is a product that measures the diameter and shape (such as oval, taper, etc.) of holes using two or four contacts in each section. It consists of a nosepiece designed to account for measurement errors caused by one or more measurement arm sets and the operator, with each nosepiece and arm set tailored to meet customer requirements. Additionally, it has an IP67 protection rating, safeguarding against water, drift, and dust, and is designed for use in harsh production environments. 【Features】 ■ IP67 protection rating, protecting against water, drift, and dust ■ Measures the diameter and shape (such as oval, taper, etc.) of holes using two or four contacts in each section ■ Composed of a nosepiece designed to account for measurement errors caused by one or more measurement arm sets and the operator *For more details, please refer to the PDF document or feel free to contact us.

The "M4 Star MRG" is a mechanical ring gauge that measures shaft and pin-type components with diameters ranging from 5mm to 125mm using a dial indicator. The C dimension can be customized from 1mm to 6mm to allow measurement near the flange. For the 5-60mm range, it has one holding handle, and for the 60-120mm range, it has two small holding handles, making it easy to handle during measurement. It can also be mounted on a stand. 【Features】 ■ LVDT or HBT transducer ■ Standard measurement range from 5mm to 125mm, with the capability to measure larger diameters ■ Wireless or cable connection (cable outlet axial or radial) ■ Custom-designed: flexible customization options ■ Optional: gauge stand (with/without setting pin slot) *For more details, please refer to the PDF document or feel free to contact us.

The "WRG" is a high-precision automatic gauge for measuring the diameters of cylinders, crank pins, and camshaft bores. It is ideal for use in machining centers and transfer lines in large-scale mass production environments. Measurements are conducted directly within the machine. It operates automatically and is completely independent of the axis. 【Features】 ■ Capable of measuring bores from a few mm up to a maximum of 200 mm ■ Exhibits astonishing flexibility while guaranteeing the same level of precision ■ Manages up to 8 transducers with a single gauge ■ Can measure different sections with one system ■ Achieves remarkable versatility at a low cost ■ Equipped with protective devices in case of a frontal collision *For more details, please refer to the PDF document or feel free to contact us.

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

The "M-EET Bench" is a sample holder that can measure the expansion and contraction of electrode materials within electrochemical cells during charge and discharge cycles. It can be easily removed from the bench for assembly and disassembly in a glovebox. It is equipped with two pressure ranges, allowing for the measurement and adjustment of pressure applied to the sample using a load cell (10 to 100 N). 【Features】 - Non-contact transducer for measuring volume changes in electrode materials - Two types of holders (two-electrode cell for overall measurement, three-electrode cell for single electrode measurement) - Pressure applied to the sample can be measured and adjusted with a load cell (10 to 100 N) - Two pressure ranges available - Ambient temperature measurement with a temperature sensor (-10 to 60°C) - Cell sample temperature measurement with a thermocouple *For more details, please refer to the PDF document or feel free to contact us.

"WIRELAB.XY" is a tabletop laser micrometer for wires with ultra-precision. This product, which incorporates excellent laser technology while being offered at an affordable price, achieves ultra-precise and completely reproducible measurements. It is equipped with the smart "Wirelab Software" that enables easy programming. 【Features】 ■ Objective and highly reproducible measurement results ■ Ultra-precise ■ High flexibility ■ Amazingly quick and easy to use ■ Excellent price competitiveness ■ High durability *For more details, please refer to the PDF materials or feel free to contact us.

The "SUPER-WIRELAB.XY" is a high-performance tabletop laser micrometer. It is an ideal measuring instrument for measuring wire samples, optical fibers, and magnet wires, as well as checking mold diameters through the measurement of pull wires. It is equipped with the smart "Super-Wirelab Software" that enables easy programming. 【Features】 ■ Objective and highly reproducible measurement results ■ Ultra-precision ■ High flexibility ■ Amazingly quick and easy to use ■ Excellent price competitiveness ■ High durability *For more details, please refer to the PDF document or feel free to contact us.