マーポス Product Lineup

You can directly measure the workpiece held inside the machine or attach it to an optional gauge stand, inserting the workpiece side for bench use. Zero adjustment of the measuring tool is unnecessary, allowing for a simple and quick setup change by just moving the fixed side.

• Visual Inspection Equipment

This flexibly standardized system allows for quick setup changes and reconfiguration for different types of work without the use of special tools.

• Other inspection equipment and devices

QuickSet-horizontal and QuickSet-vertical are used for multi-point measurement and shape inspection of shaft-type workpieces. QuickSet-chuck is ideal for multi-point measurement and shape inspection of workpieces that cannot be held in a V-groove or center in the horizontal direction, such as bushes, bearings, pistons, and cylindrical parts with flanges.

• Other inspection equipment and devices

Quick Read is a compact measurement display unit that can show both analog and digital readings, and it comes in three types in the series.

• Display
• Other electronic parts

It is an easy-to-use digital indicator that combines a wide measurement range with high precision.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

This is a shaft-moving universal measuring arm set for performing multiple measurements of inner diameter, outer diameter, distance, and width inspections.

• Other measurement, recording and measuring instruments
• Other machine elements

Improving productivity and reducing maintenance costs are key factors in considering product costs. The optimal solution is real-time machine control. Controlling the approach speed and dressing amount of the grinding wheel and workpiece during part processing and machine conditions enhances productivity.

• Other measurement, recording and measuring instruments

The T18 is a compact touch probe suitable for tool detection applications such as NC lathes and machining centers. The TS tool setter line is a compact tool setting application designed for use with machining centers.

• probe

Screw inspection can be performed on all workpieces using a probe with eddy currents. When the probe is inserted into the tapped hole, an electromagnetic field is generated that is proportional to the distance between the sensor and the surface of the tapped hole, and the measured analog signal can be viewed as a voltage.

• Visual Inspection Equipment

An inspection system that simultaneously measures both dimensions and non-destructive defects using a plug gauge that integrates two technologies: air measurement and eddy current.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

Marposs's laser system not only minimizes downtime but also maintains production quality. The protection feature using air tunnel technology optimally reduces noise from chips, coolant, and air, achieving the best signal-to-noise ratio.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

This measurement head features very compact drive slides in either hydraulic or pneumatic types, allowing for easy configuration of measurement applications even for grinding small precision parts or in cases where space on the table is limited. The MicroAlsar measurement head ensures reliability and performance of cables and connectors even under harsh conditions in factory environments, guaranteeing accurate measurement signals.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

The new M50 system from Marpos can integrate various bench gauges. The M50 is ideal for operational inspections and final inspections, and it can perform all dimensions, shapes, and non-destructive measurements commonly conducted on brake discs, drums, and hubs.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

This is an electronic manual ring gauge with a built-in full bridge (LVDT) transducer that supports outer diameter measurements from 4 to 100 mm. It is ideal for measurement points close to the shoulder. It can be used to measure directly on the workpiece, or it can be used as a simple bench with optional support.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

This is a mechanical manual gauge ideal for measuring the outer diameter of shaft-shaped workpieces such as transmission shafts, crankshafts, and camshafts. Two types are available by changing the setup: a model for 5-30mm and a model for 30-70mm.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

M1 Star™ offers a range of specialized plug gauges tailored for expert measurements, making it suitable for a wide variety of special applications.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

The measurement principle captures the change in distance between the nozzle of the air plug gauge and the object being measured as a change in air pressure. A differential pressure measurement called a "balanced pneumatic bridge" and an amplifier that electrically amplifies the signal are used to obtain the measurement value.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

The latest grinding technology includes a method that allows all grinding processes to be performed while the crankshaft is held in a center chuck. In traditional grinding processes, specific machines were used for different parts such as journals, pins, rear or flange diameters, and thrust surfaces. However, recent high-precision CNC control systems have begun to process all machining of the crankshaft in a sequential cycle.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

Power supply to the Easy Box(TM) and data transfer of transducer measurements to a PC or similar device are connected via a single cable through the USB port. The Easy Box(TM) allows for continuous data acquisition during static measurements or while manually and automatically rotating the workpiece. The Easy Box(TM) continuously sends data to the connected PC via the USB port.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

By using the appropriate frequency, it is possible to configure the suitable hardware and work. The multifunctional frequency testing and automatic acquisition function create a significantly new inspection tool, allowing material structure inspection to be conducted simultaneously at eight operational frequencies.

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)

- A measurement computer that can display and utilize data from measuring instruments - Capable of acquiring data from up to 16 measurements, including wireless measuring devices - Equipped with an 8.4-inch color TFT touch panel LCD display - Multi-measurement display, graph display, and statistical analysis by numbers (histogram, control chart, measurement value chart) - Remote data storage via Ethernet-LAN - Multilingual support including Japanese - Compact design with dimensions of 230×180×45mm - Fanless and HDD-less, ensuring high system reliability

• Other measurement, recording and measuring instruments

The A124 miniature measurement cell was developed to meet the growing demand for compact and easy-to-use measuring instruments. Due to its small size, the A124 can easily be adapted for multi-point measurements. With its compact size, ease of use, and versatility, the A124 is a highly attractive product for gauge designers. Its dimensions of 7 x 7 x 31 mm allow it to fit into restricted spaces where pencil probes cannot be incorporated. Despite its small size, the A124 features detachable contacts. The contacts can be easily replaced, saving time and costs. This measurement cell is designed to allow the selection of the most suitable contact for measurements according to the application.

• Other measurement, recording and measuring instruments

Marpos has many years of experience in responding to the diverse application requirements in the gauging field, providing various styluses for touch probes and accessories suitable for each application.

• Other measurement, recording and measuring instruments

The Digi Crown digital probe features a multi-channel network compatibility (1 to 12 channels) flexible measurement line (supporting 1 to 372 sensors) and can be connected to a PC using an RS232 serial interface or a dedicated RS485 interface card for PCI or ISA bus. Digi Crown sensors are robust and highly reliable. With proven Marpos technology and an IP65 waterproof structure, they are suitable for use in harsh field environments. The measurement network allows for remote high-speed data exchange up to 1 km using RS485 serial communication capabilities.

• Other measurement, recording and measuring instruments

E4N is a microprocessor-based column-type amplifier for dimension and shape measurement. The measurement values are displayed as follows: Analog three-color LED bar graph display (green: good product, red: defective product, yellow: good product close to defective) 8-digit digital display; absolute value or comparative value Measurement units, tolerance settings, full scale, and minimum reading values are also displayed. Depending on each application, you can choose one, two, or four transducers. The selectable modules are: 1, 2, or 4-channel LVDT or HBT transducer modules 1, 2, or 4-channel MRT (Marpos strain gauge transducer) modules A dedicated air/electric conversion module for one channel. The A/E conversion amplifier card can be swapped with other transducer cards (LVDT, HBT, MRT).

• Other measurement, recording and measuring instruments
• Software (middle, driver, security, etc.)