マーポス Product Lineup

We would like to introduce the measurement transducer 'GEM TF 01' for torque/axial force sensors that we handle. This is a component of the GENIOR MODULAR tool/process monitoring system, designed to connect to the DDU sensor system. It is a top-hat rail module with a supply voltage of 24V. Please feel free to contact us if you need assistance. 【Features】 ■ Component of the GENIOR MODULAR tool/process monitoring system ■ Measurement transducer for connecting to the DDU sensor system ■ ARTIS CAN bus ■ Top-hat rail module ■ Supply voltage of 24V *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

We would like to introduce our 3-axis accelerometer, the 'VA-3D MEMS'. It is capable of capturing acceleration signals and utilizes MEMS technology. It is used in the CTM and GENIOR MODULAR monitoring systems. It has a protection rating of IP66/IPx7 and is resistant to cutting fluid. Additionally, it features a compact design with an IEPE interface. 【Features】 ■ Captures acceleration signals ■ MEMS technology ■ Used in CTM and GENIOR MODULAR monitoring systems ■ Protection rating IP66/IPx7, resistant to cutting fluid ■ Compact design ■ IEPE interface *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

We would like to introduce our 3-axis acceleration/gravity sensor, the 'VA-3D MG', which we handle. It is suitable for use in the GEMVM monitoring system. Generally used for machine spindles and axes. It has a protection rating of IP66/IPx7 and is resistant to cooling lubricants. The compact design features interfaces of IEPE and RS485. 【Features】 ■ Intelligent 3-axis sensor ■ MEMS technology ■ Captures acceleration signals ■ Suitable for use in the GEMVM monitoring system ■ Generally used for machine spindles and axes *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

This document provides information about the "Artis Smart Monitoring Solution" in the context of machines, work, and FACTORY 4.0. It introduces an overview and features of the "Artis Smart Monitoring Solution," the product matrix of "GENIOR MODULAR," and tool/process monitoring. Additionally, it includes information on "machine condition monitoring" and the software "C-THRU4.0," so please feel free to read through it. [Contents (partial)] ■ Artis Smart Monitoring Solution ■ Simple integration of GENIOR MODULAR ■ GENIOR MODULAR product matrix ■ GENIOR MODULAR tool/process monitoring ■ GENIOR MODULAR base module *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

The "WAVE Series" is a wireless handheld gauge that can overcome cable management issues caused by manual measuring devices. It adopts Bluetooth wireless technology. It features ergonomic operation that prevents cable tangling and disconnection, allowing for direct measurement with the machine. Even in harsh environments, we offer a wide range of wireless handles that provide flexibility and free operation. 【Product Lineup (Partial)】 ■IWAVE2 ■WAVE2 ■IWAVE ■M1WAVE ■MINIIWAVE *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

"DUO Air" is an interface box designed for easy management of various air gauges. It allows for the connection of one or two gauges to an analog air/electric converter equipped with sensitivity adjustment and zero-setting nozzles. It can be used as a compact and affordable solution tailored to measurement applications. 【Features】 ■ Can be used as a compact and affordable solution tailored to measurement applications ■ Ideal for measurements requiring small tolerances and high resolution (0.1μm) ■ High accuracy and robustness ■ Versatile, compatible with air gauges from various manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• Other measurement, recording and measuring instruments

The "WRSP60" is a wireless communication scanning probe designed for use with machining centers and milling machines. It allows for direct verification of the profile of machined workpieces on the machine, improving quality in the production process and optimizing cycle time. It enables measurements that cannot be achieved with standard touch probes, thereby reducing cycle time. 【Convenience】 ■ High-speed on-machine measurement by the machining machine ■ Improvement of production quality ■ Enhancement of machine productivity ■ Real-time monitoring of production quality ■ Long battery life ■ Easy installation and operation *For more details, please download the PDF or feel free to contact us.

• probe

The "M62 DF Micro" is a precision measuring device designed for double flank inspection of spur gears and helical gears with a pitch diameter of 20 to 120 mm. This system is designed to be simple and easy for operators in the workplace to use. General parameters can be quickly evaluated through numerical and graphic displays on the E9066T industrial computer. [Features] - Designed for operators in the workplace to use simply and easily - General parameters can be quickly evaluated through numerical and graphic displays on the E9066T industrial computer - Option: Additional base structure for gears with a pitch diameter of 120 to 300 mm *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

In the aerospace industry, precise management of tools is key to quality assurance in the precision machining of parts. Particularly for components that affect the safety of aircraft, even slight wear or changes in the shape of tools can significantly impact machining accuracy. Traditional measurement methods have been cumbersome for measuring complex-shaped tools and grinding tools like grinding wheels, leading to risks of measurement errors. The non-contact tool measurement system 'VTS WF' equipped with a CCD camera was developed to address these challenges. 【Application Scenarios】 - Quality management of tools in the manufacturing of aerospace components - Wear management of grinding tools and specially shaped tools - Manufacturing of parts requiring high precision machining 【Benefits of Implementation】 - Accurately grasping tool wear and shape changes, contributing to improved machining accuracy - Facilitating the measurement of complex-shaped tools and grinding tools, reducing measurement time - Streamlining quality management and reducing the risk of defective products

• Other measurement, recording and measuring instruments

The "VTS WF (Wide Field)" is a non-contact imaging camera tool setter optimized for measuring special tools that are crucial for ultra-high precision machining on CNC machines. It is specifically designed for applications in high-precision turning centers and lathes. Depending on the frame range size, it can measure tools with a diameter of up to 2.9 mm for double-sided and up to 80 mm for single-sided. An air shutter covers and protects the optical lens, designed with consideration for harsh machine environments. The camera tool setter can also be used to measure complex-shaped tools and grinding tools, such as grinding wheels, which are difficult to measure with other tool setters. It enables the measurement and management of tools that require high quality and machining precision, which have previously been challenging to automate (unmanned), contributing to increased production efficiency and reduced labor. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments

Non-contact measurements with high precision are achieved without damaging the measured object. Thickness measurements can be performed with extremely high resolution on all types of surfaces and materials, including highly reflective surfaces. The NCG-R system, equipped with a dedicated optical sensor, is designed with high protection performance (such as an enclosure compliant with IP standards), making it suitable for a wide range of applications from post-manufacturing inspections to in-process inspections. Thickness measurements of thin films, coatings, and nano-layers are the standout features of the NCG-R system, demonstrating exceptional performance. The NCG-R controller (visible light type) is compatible with all types of sensor heads, achieving optimized performance tailored to the measurement range and operating environment (such as working distance and spot size).

• Coating thickness gauge

This is a series of controllers designed to measure thickness and distance in conjunction with optical sensor heads. Utilizing interferometric (interferometer) technology and a dedicated data processing software package, it provides a solution for accurate measurements even in situations where contact with the target area is not possible. With high precision and stability at the sub-micron level, it guarantees reliable measurements with excellent repeatability and accuracy. Additionally, it supports inline process control with real-time monitoring, contributing to improved production efficiency.

• Coating thickness gauge

In the automotive industry, with the spread of electric vehicles (EVs), the quality of electric motors is becoming increasingly important. In particular, the performance of the motor directly affects the driving performance of EVs, so high quality is required. Additionally, streamlining the production line is essential for cost reduction and strengthening market competitiveness. e.d.c. provides a comprehensive solution specialized in functional testing of electric motors to address these challenges. 【Usage Scenarios】 - Quality control of motors for EVs - Performance evaluation during the motor development stage 【Effects of Implementation】 - Improvement in quality through early detection of defective products - Ability to set manufacturing line parameters based on data

• Testing Equipment and Devices
• Other motors
• Other Auto Parts

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices
• Other motors
• Other Auto Parts

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

OptoQuick captures and analyzes optical images to measure various workpieces such as cams, cranks, gears, and drive shafts with high precision and in a short time. <Main Features> 1. High Speed and High Precision - Achieves accurate and stable high-precision measurements in seconds using cutting-edge image processing technology. 2. High Flexibility - Capable of measuring various parts with a single unit, allowing for the production of different workpieces in the same manufacturing area. - Excellent operability, with measurement results that are easy to understand, enabling efficient and rapid work. 3. Multi-Sensor - In addition to optical sensors, it supports measurements of various shapes such as holes, shaft runout, cams, and half-strokes using three types of contact sensors. - Combining contact and non-contact technologies creates significant synergies. 4. Improved Workability - By installing it right next to the manufacturing machine, it reduces unnecessary time spent on moving and verifying parts. - Easily accommodates new parts by simply adding configuration files.

• Other measurement, recording and measuring instruments

"QUADRALINE.XY" is an inline management laser system for rolled/extruded products with a rectangular cross-section. It is based on a two-axis laser gauge installed on the machine, measuring the external dimensions of the product along two directions at 90°. This method allows for the measurement of both height and width along the axis of the rectangular cross-section of the product. Additionally, the "Quadraline.XY software" is preloaded within the Xactum gauge, and thanks to its modular structure, it can meet all operational requirements. 【Features】 ■ Non-contact measurement enabled by laser technology ■ 100% tolerance checks through online applications ■ Significant material savings: production within tolerances through control ■ Automatic control functions help reduce labor costs ■ Improved product quality and reduced waste *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

In the semiconductor industry, accurate thickness measurement of wafers and thin films is essential to improve product quality and yield. Particularly as miniaturization progresses, even slight deviations in film thickness can significantly impact product performance, necessitating high-precision measurements. The optical interference measurement device 'NCG' is designed to manage the thickness of various materials such as glass, plastic, and silicon wafers using optical interference technology. 【Application Scenarios】 - Thickness measurement in the wafer manufacturing process - Quality control in the thin film formation process - Quality assurance in semiconductor device manufacturing 【Benefits of Implementation】 - Guarantees processing accuracy within the desired tolerances - Reduces cycle time - Maintains controlled and stable production

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "NCG" is a thickness measurement device using optical interference technology. It calculates and measures the thickness of layers through the interference caused by the reflection of light waves at the joint surface of the workpiece. It is designed to manage the thickness of different materials such as glass, plastic, and silicon wafers. This product can be connected to various machines, allowing for high-precision and high-speed management of component thickness, and can be used in dry or wet environments within the specified limits of the specifications, either on the machine or inside the machine. 【Features】 ■ Guarantees processing accuracy within the desired tolerance ■ Reduces cycle time ■ Control for maintaining stable production under controlled conditions ■ Compensation for mechanical variations ■ History of measurement results *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

"VBI" monitors the blade during wafer cutting, ensuring high reliability and reducing waste. By measuring blade wear and shape in real-time, it achieves scrap reduction without stopping production. The interface unit connects two sensors. It is possible to perform the same function with both or to execute two different functions. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Sensors
• Wafer

The P3CF is a measurement system that combines traditional contact probes with a non-contact probe using confocal technology (hybrid measurement). It can directly measure the distance of various materials and the thickness of transparent materials in white light. The thickness of thin and delicate materials (such as ceramics, semiconductor wafers, and epoxy resin mold compounds for packaging) requires precise measurement in the finishing process, but it is challenging to measure with contact methods. The P3CF, which employs confocal technology, measures the thickness non-contact by determining the distance from the reference plane to the work surface. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Sensors
• Wafer

In the metal processing industry, precision and efficiency in shape measurement are required to ensure product quality. Particularly in low-volume, high-variety production and flexible production lines, reducing setup changes and shortening measurement times are crucial. Non-contact measurement solutions address these challenges, enabling flexible production while enhancing traceability. 【Application Scenarios】 - Shape measurement of shafts - Measurement of pin bearings on crankshafts - Measurement of joints 【Benefits of Implementation】 - Elimination of setup changes and realization of mixed production - Acceleration of quality inspection - Strengthening of traceability

• Other measurement, recording and measuring instruments

In the automotive industry's quality control, accurate measurement of diverse components is essential to ensure product safety and reliability. Particularly in flexible production lines, there is a demand for rapid and precise measurement solutions that can accommodate small-batch production of various types. Traditional contact measurement methods have faced challenges such as long measurement times and the hassle of setup changes. Our non-contact measurement solutions address these issues and contribute to the efficiency of quality control. 【Application Scenarios】 - Measurement of crankshafts and eccentric workpieces - Quality inspection of fastening components - Streamlining quality control in flexible lines, eliminating setup changes 【Benefits of Implementation】 - Reduction in measurement time - Decrease in setup change time - Strengthening of traceability - Acceleration of quality inspection

• Other measurement, recording and measuring instruments

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

The "E9066E" is an industrial wide-screen computer innovatively designed based on cutting-edge embedded PC technology (featuring an INTEL quad-core 64-bit industrial platform and Microsoft Windows 10-IoT). It utilizes an ultra-low power processor that delivers high performance with the lowest possible power consumption. 【Features】 ■ Uses an ultra-low power processor ■ No fans or disks included ■ Utilizes an industrial-grade quad-core processor capable of high processing ■ Provides complex calculations and excellent graphical applications ■ Supports connections to various interfaces *For more details, please refer to the PDF document or feel free to contact us.

• Embedded Board Computers

The "Grindline+.X Laser System" is designed to measure the outer diameter of products manufactured by centerless grinding machines (such as electric drive motors and parts without center holes with multiple diameters) on the production line. The patented self-calibrating device guarantees permanent gauge accuracy without the need for remastering. 【Features】 ■ Through-feed measurement of up to 10 items ■ Alarm output for part sorting and tolerance checks ■ Real-time grinding process adjustments ■ Processing and printing of statistical reports ■ Interface with remote computers ■ NO-VAR technology: temperature compensation function (reducing the impact of room temperature changes) *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "Grindline.X Laser System" is designed to measure the outer diameter of products manufactured by through-feed, centerless grinding machines, such as pins, shock absorber rods, and steering racks, on the production line. With a wide measurement range and dedicated data processing software, this system can measure a large number of parts with varying shapes and dimensions without special operations. 【Features】 ■ Through-feed measurement and display of measurement diameter ■ Alarm output for part sorting and tolerance checks ■ Real-time grinding process adjustments ■ Processing and printing of statistical reports ■ Interface with remote computers ■ NO-VAR technology: temperature compensation function (reducing the impact of room temperature changes) *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

"TTV (Total Thermal Vision)" is an infrared vision system designed to monitor the surface temperature of molds during the die-casting process. The thermographic camera built into the machine applies infrared visual technology to monitor the thermal map of the mold surface in real-time. It visualizes the processing steps and contributes to the optimization of release spray and lubrication processes during die-casting production. Additionally, the system consists of a controller unit and a thermographic camera unit, both designed to operate in particularly harsh foundry environments. 【Features】 ■ Stabilization of quality ■ Reduction of process costs (decrease in the number of waste shots) ■ Extension of mold lifespan ■ Optimization of cycle time ■ Improvement of system efficiency (OEE enhancement) ■ Analysis of process variables and errors ■ Reduction of unexpected process stoppages *Demonstrations are available. Please feel free to inquire. For detailed specifications, please download the PDF and take a look.

• Other measurement, recording and measuring instruments
• Thermography

"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The product is an effective method for monitoring and controlling the machine by detecting defects or abnormal conditions in the workpiece during the deformation stage to prevent overload or damage to the tool elements. Furthermore, by intricately combining the signals from the sensors installed on the machine using algorithms, it achieves improved machine efficiency and reduced processing time during setup. It allows for the entire molding process to be monitored and recorded within the machine frame, and the RAM sensor monitors the tools within the machine. 【Features】 ■ Machine safety ■ Machine efficiency (increased usage time, maximization of tool life) ■ Increased productivity (more workpieces produced per minute, unmanned shift system) ■ Improved workpiece quality (supply without defects) ■ Reduction of unplanned downtime/tool damage/repair costs *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• EAI/ETL/WEB application server
• Other information systems

Contact measurement is an ideal solution for process control applications in grinding machines. The 'UNIMAR' measurement head is a combination of traditional pre-process/in-process/post-process gauges. It serves as a fundamental component when configuring applications within the machine. With a wide range of models available, it can be used for various types of applications while maintaining excellent measurement performance specifications. Additionally, this product is ideal for use in various types of grinding environments. These measurement heads are designed for easy operation and maintenance, making them accessible for anyone to use. 【Features】 - Ideal for use in various types of grinding environments - Designed for easy operation and maintenance - Supports various types of applications while maintaining excellent measurement performance specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Grinding Machine
• Other measurement, recording and measuring instruments

The new electronic gauge "P1DME" connects to the Marpos measuring head, providing an economical, compact, practical, and reliable solution for grinding machines. This product controls workpiece dimensions during the grinding process and is flat and compact. It features a touch screen with a cover lens on the surface. It can be easily installed on any grinding machine and controls continuous surface work. This new human interface is intuitive, making daily tasks easier. 【Features】 ■ Controls workpiece dimensions during the grinding process ■ Flat and compact ■ Equipped with a touch screen with a cover lens on the surface ■ Easily installed on any grinding machine and controls continuous surface work *For more details, please refer to the PDF document or feel free to contact us.

• Grinding Machine

"BLU" is an innovative modular machine tool monitoring/process control system. This system is the result of 50 years of experience in managing and optimizing machine tool work processes. It consists of a series of connected functional nodes. These functional nodes form a unique network using a single bus managed by a master node, and are typically installed within the machine's cabinet. 【Features】 ■ Interactive creation of operating cycle programs ■ Simple display format and easy operation ■ Composed of a series of connected functional nodes ■ The result of 50 years of experience in managing and optimizing machine tool work processes ■ Designed to maximize integration with machine tools *For more details, please refer to the PDF materials or feel free to contact us.

• Other process controls

Our company has developed the 'PROTOMAR' diameter measurement head to meet the increasing quality demands in the manufacturing of medium to large workpieces such as brooches, railway vehicle axles, printing rolls, and milling rollers, used both during and after the grinding process. A major feature is that it is a gauge for absolute value measurement. Therefore, there is no need for special zero-setting; it can measure various diameters within the set measurement range simply by calibrating with a known master. The measurement range is set according to the type and dimensions of various workpieces. 【Features】 ■ Gauge for absolute value measurement ■ No need for special zero-setting ■ Capable of measuring various diameters within the set measurement range ■ Set according to various workpiece types and dimensions ■ Accuracy and repeatability errors are minimized to the absolute minimum *For more details, please refer to the related link page or feel free to contact us.

• Grinding Machine
• Other measurement, recording and measuring instruments

"P1DWB" is a basic system for balancing grinding wheel spindles and process monitoring. In both FT and ST models, a single balancing head and built-in acoustic sensor (if applicable) are centrally managed. It is not only backward compatible with E78/E82 electronic units but also performs pre-balancing and unbalance spectrum analysis. 【Features】 ■ Equipped with multi-level login functionality for secure management of data and settings ■ Automatic diagnostic function ensures rapid resolution of issues ■ Can be installed externally on machine tools ■ Can also be integrated into the control panel *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Grinding Machine

The "WRG" is a high-precision automatic gauge for measuring the diameters of cylinders, crank pins, and camshaft bores. It is ideal for use in machining centers and transfer lines in large-scale mass production environments. Measurements are conducted directly within the machine. It operates automatically and is completely independent of the axis. 【Features】 ■ Capable of measuring bores from a few mm up to a maximum of 200 mm ■ Exhibits astonishing flexibility while guaranteeing the same level of precision ■ Manages up to 8 transducers with a single gauge ■ Can measure different sections with one system ■ Achieves remarkable versatility at a low cost ■ Equipped with protective devices in case of a frontal collision *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Marposs USB Line" allows for direct connection of electric micro (pencil probes), universal measurement arm sets, encoder interfaces, and I/O signals to gauge computers, commercial PCs, and industrial PCs via a standard USB COM port. We offer a variety of products that can be connected via USB, including the Red Crown 2 pencil probe "Red Crown2 USB," the transducer-integrated type "Quick Block USB," and various "USB interfaces." 【Features】 ■ Plug & Play with no additional connection devices required ■ Direct connection and display possible with USB host devices that can recognize the USB line ■ Applications capable of both static and dynamic measurements ■ Software interface: Marposs software is available for measurement integration *For more details, please refer to the PDF materials or feel free to contact us.

• Other Connectors
• Other cable related products

The "Red Crown2" is a pencil probe that comes in standard specifications (with gasket IP65) or soft touch (without gasket IP54). The main spindle uses a high-precision ball cage and is equipped with connection options tailored to the usage conditions and specifications of the display device. Additionally, we offer the "Digi Crown2," which can be used in combination with Digi Net, and the "Red Crown2 USB," which can be directly connected to various USB host devices. 【Features】 <Red Crown2> ■ The main spindle uses a high-precision ball cage ■ Equipped with connection options tailored to the usage conditions and specifications of the display device ■ In the analog probe specification using LVDT or HBT transducers, it can be used with standard Marpos amplifiers or amplifiers from other manufacturers ■ In addition to connector specifications, a connector-less option is available *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other measurement, recording and measuring instruments

We would like to introduce "Quick SPC," handled by Marpos Co., Ltd. We provide integrated software modules for data processing (measurement calculations, statistical processing, corrections for machining, network connections, and data storage). Additionally, it is capable of connecting various analog and digital measuring instruments as well as CNC machine tools, and it is Windows software that can be used in a 32-bit factory environment. 【Features】 ■ Safe and easy to use immediately ■ Simple to operate ■ Usable without a mouse ■ Safe and highly reliable ■ Customizable *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems

"Nemo" is designed for simple measurements with up to 16 sensors across 8 measurements, and it is a compact, robust, and reliable computer for gauge use that allows for quick setup of straightforward measurements. Measurement data can be connected to a server via the internal memory and LAN network. Additionally, the 5.7-inch color display allows for the display and reading of measurement values, and with the touch screen, programming tasks and data collection can be performed without the need to connect a keyboard or mouse. 【Features】 ■ Smaller than A5 size due to the built-in architecture ■ Provides safe and powerful storage capacity with a digital micro card ■ Software offers an easy-to-use operator interface ■ Multi-language support for European and Asian languages ■ Password protection for multi-user management *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "M4 Star MRG" is a mechanical ring gauge that measures shaft and pin-type components with diameters ranging from 5mm to 125mm using a dial indicator. The C dimension can be customized from 1mm to 6mm to allow measurement near the flange. For the 5-60mm range, it has one holding handle, and for the 60-120mm range, it has two small holding handles, making it easy to handle during measurement. It can also be mounted on a stand. 【Features】 ■ LVDT or HBT transducer ■ Standard measurement range from 5mm to 125mm, with the capability to measure larger diameters ■ Wireless or cable connection (cable outlet axial or radial) ■ Custom-designed: flexible customization options ■ Optional: gauge stand (with/without setting pin slot) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

The "M2 Wave" is a high-precision wireless electric snap gauge. It eliminates issues related to cable length, tangling, and disconnection, allowing for unrestricted and free operation without cable limitations. Additionally, it consists of a snap gauge head and Marpos's "Wave" communication technology, along with a special handle equipped with a lithium battery and dielectric charging system. 【Features】 ■ Offers excellent performance similar to the wired M2 Electron ■ Further optimizes the measurement of crankshaft journal diameter and pin diameter ■ By pressing the button on the top of the handle, real-time measurement values are displayed on the display device ■ The same button allows for data storage for statistical analysis, as well as control of guide sequences and measurement cycles *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "M2 Electron" is a high-precision electric snap gauge. Due to its accuracy and ease of handling, it offers products suitable for measuring various main bearings and pin bearings (diameter measurement in 1, 2, or 3 sections, oval, barrel shapes, and taper) in the market. It can also be used with Marpos' embedded gauge computers and industrial PCs. 【Features】 ■ Durable design with a monolithic structure ■ User-friendly robust handle ■ Compatibility of wear parts ■ No need for step changes or maintenance ■ Specifically designed for the automotive market, ensuring excellent reproducibility and accuracy *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The "M1 Star" allows for reliable measurements thanks to its precisely designed plunger and depth stop. It is designed to measure standard rivet sizes for aircraft, and its simple design makes setup changes easy. Additionally, we offer various specifications for taper hole gauges. 【Features】 ■ Capable of measuring size, depth, and angle ■ Includes taper hole diameter measurement gauge for rivets and taper hole depth gauge ■ When connected to the Marpos gauge computer, it can also measure the angle of taper holes ■ The angle measurement of taper holes can be obtained through two types of measurements *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments