マーポス List of Products and Services

The "PROVASET T2" is a high-reliability pressure drop air leak tester that offers excellent performance using new electric/pneumatic technology, featuring a compact design and versatile functions. It is designed for manual operation, such as in test benches, but can also be integrated into automated systems with PLC control. It supports communication via digital I/O, Ethernet/UST host-slave, and serial interfaces such as RS232/RS484, allowing for the collection of test results through USB or Ethernet. 【Features】 ■ Leak testing with a full-scale range of up to 6 bar ■ 3.5-inch color LCD display with touch screen ■ Up to 100 test program tables ■ Digital I/O interface for PLC connection ■ Ability to record inspection data via Ethernet *For more details, please refer to the PDF materials or feel free to contact us. *This product is available for loan or trial at our Tokyo showroom.

The "PROVASET T3LMF" is a pneumatic device designed for leak testing of large-volume workpieces using a mass flow method at a set pressure. Real-time measurement display and changes to set values can be performed simply and quickly via a touch panel color display. It is suitable for use in test benches, production lines, and fully automated systems across all industrial sectors, and is particularly well-suited for testing battery packs and their cooling systems in electric vehicles (EVs). 【Features】 ■ Built-in pressure circuit suitable for testing large-volume workpieces <Leak Test> ■ Test sensitivity guideline: 50 cc/min ■ Full scale: Maximum 0.2 MPa and capable of testing down to negative pressure ■ Resolution: Minimum 0.01 cc/min *For more details, please refer to the PDF materials or feel free to contact us. *This product is available for actual machine lending and trials at our Tokyo showroom.

The "PROVASET T3LD" is a groundbreaking differential pressure air leak tester that uses differential pressure measurement. By measuring the differential pressure that occurs between the test work and the comparison sample, it enables a reduction in test time and high-sensitivity inspections. Real-time display of measurements and changes to set values can be performed simply and quickly on a touch panel color display. 【Features】 ■ Resolution down to 0.1 Pa (0.001 mbar) ■ 7-inch touch panel display ■ Up to 300 test programs/sequences can be set ■ Built-in pneumatic regulator as standard ■ Digital communication RS232/RS485, USB *For more details, please refer to the PDF document or feel free to contact us. *This product is available for actual machine lending and trials at our Tokyo showroom.

The "PROVASET T3LP" is a revolutionary pressure drop air leak tester that uses pressure drop measurement. Real-time display of measurements and changes to set values can be performed simply and quickly on a touch panel color display. Up to 300 test programs/sequences can be set. 【Features】 ■ Resolution down to 0.1Pa (0.001mbar) ■ 7-inch touch panel display ■ Up to 300 test programs/sequences can be set ■ Built-in pneumatic regulator as standard ■ Digital communication RS232/RS485, USB *For more details, please refer to the PDF document or feel free to contact us.

The "PROVASET T3LPF" is an air flow testing device that uses an electro-pneumatic regulator to set the pressure. Real-time measurement display and setting value changes can be performed simply and quickly on a touch panel color display. It is suitable for use in test benches, production lines, and fully automated systems across all industrial sectors. 【Features】 ■ High-speed testing for filters/valves/cocks/exhaust manifolds <Flow Test> ■ Full scale testing up to a maximum of 300L/min ■ Resolution down to a minimum of 0.01cm3/min <Leak Test> ■ Full scale testing up to a maximum of 1.0MPa ■ Resolution down to a minimum of 0.01Pa (0.001mbar) * For more details, please refer to the PDF materials or feel free to contact us. * This product is available for loan or trial at our Tokyo showroom.

The "PROVASET T3LPQ" is a direct measurement air leak tester that conducts leak tests by directly measuring the leak rate. The pressure balance method of this device is a measurement technique that is independent of the test volume, providing better stability and accuracy. It is suitable for use in test benches, production lines, and fully automated systems across all industrial sectors. 【Features】 ■ Full-scale testing up to a maximum of 100L/min ■ Resolution down to a minimum of 0.01cm3/min ■ 7-inch touch panel display ■ Up to 300 test programs/sequences can be set ■ Standard built-in electro-pneumatic regulator *For more details, please refer to the PDF materials or feel free to contact us.

The "DELTA TM3P" is a pneumatic module that can be considered an ideal solution for embedding compact and highly reliable measurement stations within automation systems. By separating the display and push buttons, the installation dimensions are reduced, allowing for optimal placement of the module at each automation station. As a result, it is possible to minimize unnecessary volume, shorten test times, and enhance the sensitivity of tests by keeping the distance to the test work as close as possible. 【Features】 ■ Resolution down to 0.1 Pa (0.001 mbar) ■ Compact design for pressure and electrical circuits ■ Further reduction of test time ■ Easy to install and operate separate type ■ Digital communication RS485/USB, PLC digital interface *For more details, please refer to the PDF document or feel free to contact us.

The "Delta TM3F" is a flow measurement type air leak/flow test module that directly measures the pressure and flow rate of test work (filters, plugs, valves, etc.). For leak tests and flow tests with small volumes, testing can be completed in less than one second. By using an internal tank and flow sensor, the leak rate can be measured directly. 【Features】 ■ Testable full scale from 25 cm³/min to 160 L/min ■ Resolution down to a minimum of 0.01 cm³/min ■ Full scale pressure from 0.05 to 1.0 MPa ■ Resolution down to a minimum of 0.1 Pa (0.01 mbar) ■ Further reduction of test time *For more details, please refer to the PDF document or feel free to contact us.

The "LTC (Leak Tester Controller)" is a very efficient leak simulator for controlling the implementation of leak and flow tests. This product can also be used for pressure calibration verification and measurement device confirmation. Users can verify and record whether the performance of the test equipment complies with ISO 9001 through the LTC. 【Features】 ■ Maximum pressure setting: 0.2/0.6/1.0 MPa ■ Maximum negative pressure setting: -0.09 MPa ■ Resolution: 1 Pa (0.01 mbar) ■ Adjustable flow rate: 50 cm³/min to 950 cm³/min ■ Resolution: 0.01 cm³/min *For more details, please refer to the PDF document or feel free to contact us. *This product is available for actual machine rental and trials at our Tokyo showroom.

The "Delta TM3PD" is a test module designed to conduct leak tests on test work (filters, plugs, valves, etc.) using a highly sensitive differential pressure method. By separating the display and push buttons, the installation dimensions are reduced, allowing the module to be arranged appropriately for each automation station. This enables the minimization of test volume, reduction of test time, and enhancement of test sensitivity. 【Features】 ■ Full scale testing up to a maximum of 3.0 MPa ■ Resolution down to a minimum of 0.1 Pa ■ Further reduction of test time *For more details, please refer to the PDF document or feel free to contact us.

The "Leak Master" is an ideal device for efficiently conducting regular inspections of test systems, allowing for quick and easy quality management through its use. By incorporating this product into the test path, you can easily check for any issues with the test equipment itself or the connecting components to the product. 【Features】 ■ Calibration guaranteed for efficient leak master testing and inspection ■ Standard specifications with a wide range of leak rate variations ■ Easy and quick to connect ■ Low cost and high reliability ■ Quick and easy implementation of regular inspections *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce products suitable for testing, measuring, and inspecting disposable products for the biomedical field. 【Example of Introduced Products】 ■ Marpos Aeroel 2-Axis Laser Sensor Non-contact measurement of the diameter and ovality of medical bottles, vials, tubes, etc., made of transparent or opaque materials. ■ Chromatic Confocal Sensor Measures distance and thickness with high resolution, including reflective surfaces, on various types of surfaces and materials without the risk of changing parts. 【Use Cases】 ■ Dimension checks for tubes ■ Leak tests for assembly parts of bags, connectors, and filters ■ Measurement of small-diameter connectors for liquid and gas cylinders ■ For cleaning solution bottles and syringe assemblies, etc. *For more details, please refer to the PDF document or feel free to contact us.