いけうち（霧のいけうち） List of Products and Services

Product Introduction The "GSIM2" series is an atomizing nozzle that achieves a large spray volume with a small amount of compressed air due to its low air-to-water ratio design. It is effective in cooling combustion gases and humidifying exhaust gases at steel mills and power plants, as well as in waste liquid spraying. With high cooling performance, it ensures stable processing for temperature regulation inside furnaces and gas cooling in cooling towers. Additionally, it is utilized for dust suppression in recycling facilities, waste incineration plants, and raw material facilities for steel and cement, effectively reducing dust dispersion with fine mist. *We also offer a wide range of other spray nozzles. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are available at any time.*

• nozzle

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: a nozzle tip, core, cap, and adapter, and is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow among two-fluid systems ○ Compact type ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

• nozzle

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It consists of four components: a nozzle tip, core, cap, and adapter, and operates as a suction type that draws liquid using the force of compressed air for spraying. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurizing device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

• nozzle

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. The internal mixing design allows for the atomization of liquid by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

• nozzle

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

• nozzle

The "Wide Angle Fan Nozzle (Low Volume Spray) YYA" is a two-fluid wide angle fan nozzle that generates a fine mist with an average particle diameter of 15 to 30 μm, featuring a wide spray pattern. It has a compact design and can spray viscous liquids (up to about 300 cP). This is an external mixing type metal integrated two-fluid nozzle that atomizes by mixing compressed air and liquid outside the nozzle. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Two-fluid wide angle fan nozzle ○ Wide spray pattern ○ Capable of spraying viscous liquids ○ Compact type ○ Structure that is less prone to clogging For more details, please contact us or download the catalog.

• nozzle

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

• nozzle

By ejecting a liquid volume 3 to 4 times that of the supply amount and generating a powerful stirring flow within the liquid, we achieve uniform concentration and prevent sedimentation. We also offer a high flow rate type that boasts 1.5 to 2 times the flow rate compared to the standard type, allowing for selection based on application needs. Materials are available in metal and resin, and you can choose the optimal specifications from three types: single-direction spray, dual-direction spray, and slit type. *We have a wide range of other spray nozzles available as well. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.

• nozzle

The "Pipe Cleaning Nozzle RSP" generates a strong jet flow directed forward, diagonally forward, sideways, and diagonally backward, allowing it to self-propel within the pipe through reaction force. It is a one-piece nozzle that can be manufactured with any specified hole diameter and number of holes in the forward, diagonal forward, side, and diagonal backward directions. It is ideal for cleaning pipes, water supply pipes, sewage pipes, heat exchangers, and tubes of refrigeration units, especially for removing scale deposits from contaminated pipe interiors. The available screw sizes are 1/8M, 1/4M, 3/8M, and 1/2M. 【Features】 - Generates a strong jet flow directed forward, diagonally forward, sideways, and diagonally backward - Self-propelling pipe cleaning nozzle through reaction force - Suitable for cleaning contaminated pipe interiors with scale deposits - Available screw sizes range from 1/8 to 1/2M For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (with Rotating Mechanism) Aaron Jet" is a straight nozzle that rotates in a circular motion while spraying in a narrow, straight pattern, providing strong impact and a wide cleaning area. The supply water serves as the power source, allowing for automatic rotation through water flow in a simple design that enables powerful cleaning. The nozzle tip is made of a ceramic chip that excels in wear resistance and durability. It is ideal for cleaning machine parts, conveyors, removing label seals, and washing garbage collection vehicles. 【Features】 - Spraying pattern that rotates in a circle while moving straight and narrow - Excellent wear resistance - Rotates solely by the power of the cleaning liquid - Strong impact and wide cleaning area - Nozzle tip made of wear-resistant ceramic For more details, please contact us or download the catalog.

• nozzle

The "Multi-Hole Nozzle (7-Hole Type) 7CP" is a multi-hole straight nozzle that generates multiple strong jet streams with a spray pattern where seven jet streams move straight and narrow. It features a compact design with an integrated nozzle made of ceramic at the nozzle tip. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 ○ Spray pattern with seven straight and narrow jet streams ○ Straight nozzle that generates multiple strong jet streams ○ 7-hole type ○ Compact design ○ Integrated nozzle made of ceramic at the nozzle tip For more details, please contact us or download the catalog.

• nozzle

The "Multi-Hole Nozzle (7-Hole Type) 7CCP" features a spray pattern where seven narrow, straight streams of water create multiple strong impact streams. It is a compact, all-metal integrated nozzle designed with seven holes. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 - Spray pattern with seven narrow, straight streams - Straight nozzle that generates multiple strong impact streams - 7-hole type - Compact design - All-metal integrated nozzle For more details, please contact us or download the catalog.

• nozzle

The "Multi-Hole Nozzle (2-Hole Type) 2CP" is a multi-hole straight nozzle that generates multiple strong jet streams in a spray pattern where two jet streams travel straight and narrow. It features a compact design with an integrated nozzle made of ceramic at the nozzle tip. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 ○ Spray pattern with two straight and narrow jet streams ○ Straight nozzle that generates multiple strong jet streams ○ 2-hole type ○ Compact design ○ Integrated nozzle made of ceramic at the nozzle tip For more details, please contact us or download the catalog.

• nozzle

The "Multi-Hole Nozzle (2-Hole Type) 2CCP" features a spray pattern where two narrow, straight streams generate multiple strong impact streams. It is a multi-hole straight nozzle made of all-metal, with a compact design in the 2-hole type. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 - Spray pattern with two narrow, straight streams - Straight nozzle that generates multiple strong impact streams - 2-hole type - Compact design - All-metal integrated nozzle For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (with Control Mechanism) SO-CM" is a straight nozzle that generates a strong impact of ultra-fine stream with a narrow and straight spray pattern. It is less likely to produce drips and allows for responsive control. The internal piston moves up and down with control air, enabling the ON/OFF of the spray. It is ideal for applications such as trimming of paper and asbestos slate, cutting of wood and food, localized cleaning of precision machine parts, injection of chemicals, deburring, and seasoning. 【Features】 ○ Narrow and straight spray pattern ○ Generates a strong impact of ultra-fine stream ○ ON/OFF spray control possible with control air ○ High responsiveness in spray control ○ Less likely to produce drips For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (with Flexible Joint) UT+CP" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. Its internal design minimizes liquid resistance, achieving a very large spray flow rate. The nozzle features a ceramic tip and is composed of three parts: the nozzle, cap, and adapter. It is integrated with a ball joint that allows for adjustment of the spray direction. 【Features】 ○ Narrow, straight spray pattern ○ Straight nozzle that generates a strong impact stream ○ Ceramic nozzle tip ○ CP nozzle with ball joint ○ Adjustable spray direction within a range of 40° For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (for Trimming) CMP-T" is a trimming nozzle that generates a strong impact with a narrow, straight spray pattern and produces a smooth, uninterrupted laminar flow. The nozzle, which uses ceramic at the nozzle tip, consists of two parts: the nozzle and a strainer + adapter. Only the worn nozzle can be replaced. It can also be used for local cleaning of precision machine parts, chemical injection, deburring, and beer foaming. 【Features】 ○ Narrow, straight spray pattern ○ Ceramic nozzle tip ○ Strong impact that penetrates ○ Produces a smooth, uninterrupted laminar flow ○ Only the worn nozzle can be replaced For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (for Trimming) CTM" is a trimming nozzle that generates a strong impact with a narrow, straight spray pattern, creating a clear and steady stream without turbulence. The nozzle tip is made of ultra-hard alloy. It consists of two parts: the nozzle and a strainer + adapter, allowing for the replacement of only the worn nozzle. It can also be used for localized cleaning of precision machine parts, chemical injection, deburring, and beer foaming. 【Features】 ○ Narrow, straight spray pattern ○ Ultra-hard alloy nozzle tip ○ Strong impact that penetrates ○ Generates a clear and steady stream without turbulence ○ Only the worn nozzle can be replaced For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (for Trimming) CM" is a trimming nozzle that generates a strong impact with a narrow, straight spray pattern, creating a clear, steady flow without turbulence. The nozzle, which has a sleeve (a high-purity ceramic nozzle molded with durable engineering plastic) pressed into the nozzle tip, consists of two parts: the nozzle and the strainer. It can also be used for local cleaning of precision machine parts, chemical injection, deburring, and beer foaming. 【Features】 ○ Narrow, straight spray pattern ○ Ceramic nozzle tip ○ Strong impact that penetrates ○ Generates a clear, steady flow without turbulence ○ Composed of two parts: nozzle and strainer For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (Round Bottom Type) CRP(AL99)" is a straight nozzle that generates a strong impact flow with a narrow, straight spray pattern. When attached to the header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. The CRP(AL99) series (with ceramic chips) maintains stable performance over a long period due to the use of high-hardness chips. 【Features】 - Narrow, straight spray pattern - Structure that minimizes the inflow of foreign objects into the nozzle - Resistant to clogging - Straight nozzle that generates a strong impact flow - Excellent wear resistance For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (Round Bottom Type) CCRP" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. When mounted on a header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. It is ideal for cleaning applications such as paper felts, screens, machinery, parts, vehicles, transport boxes, and bottles. It is used in the paper, pulp, printing, and food industries. 【Features】 - Narrow, straight spray pattern - Structure that minimizes the inflow of foreign objects into the nozzle - Resistant to clogging - Straight nozzle that generates a strong impact stream - All-metal integrated nozzle For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (Standard) CP" is a straight nozzle that generates the strongest impact stream with a narrow, straight spray pattern. Its internal design minimizes liquid resistance, resulting in a spray flow rate that is significantly larger than other straight nozzles of the same nozzle diameter. It also has a structure that is less affected by turbulence within the pipe. It is ideal for high-pressure cleaning of paper felts, screens, vehicles, chests, machinery, parts, and for trimming applications such as paper making and asbestos slate. 【Features】 ○ Excellent wear resistance ○ Generates the strongest impact stream with a straight nozzle ○ Internal design minimizes liquid resistance ○ Achieves a very large spray flow rate ○ Strong structure against turbulence within the pipe For more details, please contact us or download the catalog.

• nozzle

The "Straight Nozzle (Standard) CCP" is a straight nozzle that generates the strongest impact stream with a narrow and straight spray pattern. Its internal design minimizes liquid resistance, resulting in a spray flow rate that is significantly larger than other straight nozzles of the same nozzle diameter. It also has a structure that is less affected by internal turbulence. It is ideal for high-pressure cleaning of paper felts, screens, vehicles, chests, machinery, parts, and for trimming applications such as paper making and asbestos slate. 【Features】 ○ Narrow and straight spray pattern ○ Generates the strongest impact stream with a straight nozzle ○ Internal design minimizes liquid resistance ○ Achieves a very large spray flow rate ○ Strong structure against internal turbulence For more details, please contact us or download the catalog.

• nozzle

"AirULM" is an industrial air conditioning and humidification system that utilizes fine mist (semi-dry fog) to control humidity throughout factories with ceiling heights of 3.5 meters or more. It can prevent dryness and static electricity generation, improving product quality and reducing defect rates. It operates solely with high-pressure pumps, without using compressed air. Compared to steam humidification, it has an excellent energy-saving performance with running costs approximately 1/50. 【Features】 - A single-fluid humidification system that does not use compressed air - A humidification system that provides suitable humidity for manufacturing sites - Utilizes semi-dry fog humidifiers - Only usable in spaces with high ceilings - Humidification capacity of 18.8L/hr per unit For more details, please contact us or download the catalog.

• Humidification device
• Other air conditioning equipment

"HandAKI" is an energy-saving two-fluid humidification system that sprays dry fog. Utilizing a mist (dry fog) that does not wet objects, it is an industrial air conditioning humidification system that creates an optimal humidity environment for buildings, factories, and clean rooms. By installing it inside air conditioning units, outside air handling units, or ducts, it is possible to achieve the desired humidity without wetting (with a saturation efficiency of over 90%). Compared to steam humidification, the running costs are about one-fifth. 【Features】 - 100% efficiency is possible - No maintenance required - The humidification unit can be used semi-permanently - Saturation efficiency of over 90% - High humidity can be easily achieved For more details, please contact us or download the catalog.

• Humidification device
• Other air conditioning equipment

"AirAKI" is an energy-saving two-fluid humidification system that sprays dry fog. Utilizing a mist (dry fog) that does not wet objects, it is an industrial air conditioning and humidification system that creates an optimal humidity environment tailored to various requests and conditions. It controls humidity in large spaces and spot areas, eliminating issues caused by static electricity. This improves product quality and reduces defect rates. Compared to steam humidification, it has approximately one-fifth the running costs and excels in energy efficiency. 【Features】 ○ Controls humidity in large spaces ○ Eliminates static electricity problems ○ Improves product quality and reduces defect rates ○ Humidification capacity of 2.4 to 9.6 liters per hour (when using AKIMist "E" humidifier) ○ Comprehensive implementation of on-site surveys, layout design, construction, and after-sales support For more details, please contact us or download the catalog.

• Humidification device
• Other air conditioning equipment

The "Uniform Distribution Nozzle (Large Spray) JJHP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It maintains a consistent flow distribution even at low pressure and allows for large spray volumes. Even at a low pressure spray of 0.05 MPa, it achieves uniform and equal distribution. Despite its large flow capacity, it has a compact size (approximately 13% reduction in total nozzle length compared to conventional products and a weight reduction of about 1 kg), enabling miniaturization and weight reduction of the equipment. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Stable and uniform spraying even at low pressure ○ Compact type ○ Enables miniaturization and weight reduction of equipment ○ Two-body nozzle consisting of the main body and a whirler For more details, please contact us or download the catalog.

• nozzle

The "Wide Angle Uniform Distribution Nozzle (Wide Angle Fine Mist) TSP" is a conical nozzle with a circular spray pattern that provides an even and wide-angle flow distribution. The nozzle sprays directly from the tip and in a fan shape from the sides, allowing for a wide spread that covers a large area. Fine mist in the range of 100 to 200 μm expands super wide from the compact nozzle and can be applied for various purposes such as firefighting, disaster prevention, and dust suppression. 【Features】 ○ Conical nozzle with a circular spray pattern ○ Wide spread covering a large area ○ Suitable for firefighting, disaster prevention, and dust suppression ○ Compact type ○ Fine mist of 100 to 200 μm For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Disassemblable) JJX" is a standard three-part conical nozzle with a circular spray pattern and uniform flow distribution. It consists of three components: the main body, X-shaped wobbler, and adapter, designed in a way that the wobbler is less likely to detach from the nozzle. The use of an X-shaped wobbler in the rotating element allows for a larger foreign object passage diameter, making it less prone to clogging. It is ideal for applications such as cooling billets in the steel industry. 【Features】 - Circular spray pattern with uniform flow distribution - Structure that is less prone to clogging - Three-part design that minimizes wobbler detachment - X-shaped wobbler used in the rotating element - Three-part nozzle consisting of the main body, X-shaped wobbler, and adapter For more details, please contact us or download the catalog.

• nozzle

The "Multi-Head Nozzle (7-Head Type / Standard Type) 7JJXP" is a full cone nozzle equipped with seven JJXP nozzles, featuring a nearly circular spray pattern. It is a very compact type. The JJXP nozzle is a one-piece nozzle with an X-shaped swirler pressed into the main body. Compared to a single-head full cone nozzle with the same spray flow rate, it has an average particle diameter that is half as large, utilizes an X-shaped swirler, and has a larger foreign matter passage diameter, making it less prone to clogging. 【Features】 ○ Spray pattern close to a circle ○ Compact type ○ Large foreign matter passage diameter, making it less prone to clogging ○ Average particle diameter is half compared to single-head nozzles with the same flow rate ○ Seven JJXP nozzles mounted on a compact header For more details, please contact us or download the catalog.

• nozzle

The "Multi-Head Nozzle (7-Head Type / Fine Mist Generation Type) 7KB" is a full cone nozzle equipped with seven KB nozzles on a compact header, producing a nearly circular spray pattern. This nozzle, which screws in seven KB nozzles (spray angle 60°) to the header, is capable of generating a large volume of fine mist. The spray tip and closer are made of ceramic, and the entire section from the swirl chamber to the nozzle is formed from ceramic, providing excellent wear resistance. 【Features】 ○ Nearly circular spray pattern ○ Compact type ○ Excellent wear resistance ○ Seven KB nozzles mounted on a compact header ○ Capable of generating a large volume of fine mist For more details, please contact us or download the catalog.

• nozzle

The "Charging Cone Nozzle SSXP" features a square spray pattern and provides an even flow distribution. With a wide spray angle of 90° to 100°, it covers a large area. It resolves the "gap" issue that occurs when multiple rows of circular spray pattern charging cone nozzles are arranged. The nozzle consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler press-fitted into the body. The use of an X-shaped wobbler in the rotary element allows for a larger foreign object passage diameter, making it less prone to clogging. 【Features】 ○ Even flow distribution with a square spray pattern ○ Wide spray angle of 90° to 100° ○ Structure with a large foreign object passage diameter, making it less prone to clogging ○ Composed of two parts: the nozzle body and the X-shaped wobbler ○ Integrated nozzle with the wobbler press-fitted into the body For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Clogging Prevention Type) AJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a new concept product that atomizes without using a swirler. Since there is no swirler, it has a structure with an extremely large foreign object passage diameter, making it resistant to clogging. It sprays at a right angle to the inflow direction. We offer injection-molded products made of polyphenylene sulfide (PPS) suitable for spraying chemical solutions such as hydrochloric acid. 【Features】 - Circular spray pattern with uniform flow distribution - Structure with a large foreign object passage diameter, resistant to clogging - Angle type that sprays at a right angle to the inflow direction - Composed of two parts: the main body and the cap - The orifice cap is screw-in type For more details, please contact us or download the catalog.

• nozzle

The "Narrow Angle Uniform Distribution Nozzle (Narrow Spray Angle Type) NJJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a one-piece nozzle composed of two parts: the main body and the orifice chip, with the orifice chip pressed into the main body. This innovative product atomizes without using a swirler (wobbler). Since there is no wobbler, it has a very large foreign object passage diameter, making it less prone to clogging. It is ideal for use in industries such as steel, food, and transportation. 【Features】 ○ Circular spray pattern with uniform and narrow flow distribution ○ Structure with a large foreign object passage diameter that is less prone to clogging ○ Atomization without using a swirler (wobbler) ○ Composed of two parts: the main body and the orifice chip ○ One-piece nozzle with the orifice chip pressed into the main body For more details, please contact us or download the catalog.

• nozzle

The "Wide Angle Uniform Distribution Nozzle (Wide Spray Angle Type) BBXP" is a conical nozzle with a circular spray pattern and uniform flow distribution. With a spray angle of 120°, it can cover a wider area than any other nozzle. It consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler press-fitted into the body. The use of an X-shaped wobbler in the rotating element allows for a larger foreign object passage diameter, making it less prone to clogging. It is available in small to medium flow rates. 【Features】 ○ Circular spray pattern with uniform and wide flow distribution ○ Structure with a large foreign object passage diameter that is less prone to clogging ○ Wide spray angle of 120° covering a broad area ○ Integrated nozzle with the wobbler press-fitted into the body ○ Available in small to medium flow rates For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (High Flow Flange Type) TJJX" is a full cone nozzle with a circular spray pattern and uniform flow distribution. It connects to piping via flange fastening. The nozzle body is composed of the main body and an X-shaped whirler, which is secured with a lock bolt and can be removed from the main body. By adopting the newly developed X-shaped whirler, the overall length of the nozzle has been reduced by 20% compared to conventional products. The use of the X-shaped whirler in the swirler allows for a larger foreign object passage diameter, making it less prone to clogging. 【Features】 ○ High flow flange type full cone nozzle ○ Circular spray pattern with uniform flow distribution ○ X-shaped whirler used in the swirler ○ Large foreign object passage diameter, less prone to clogging ○ Overall nozzle length reduced by 20% (compared to conventional products) For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Small Amount Spray) J" is a full cone nozzle with a circular spray pattern and an even flow distribution. It has the smallest spray flow rate among full cone nozzles. This innovative full cone nozzle atomizes through collision inflow. All models come standard with a strainer, and all parts are disassemblable. The spray tip nozzle and closer are made of ceramic, providing excellent wear resistance. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Smallest spray flow rate among full cone nozzles ○ Atomization through collision inflow ○ Excellent wear resistance ○ Ceramic used in spray tip nozzle and closer For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Small Spray) JJRP" is a small spray conical nozzle made of PTFE (polytetrafluoroethylene) with excellent chemical resistance, and the injection-molded part is made of PVDF (polyvinylidene fluoride). The PTFE nozzle consists of two parts: the nozzle body and an X-shaped wobbler, while the PVDF nozzle consists of the injection-molded nozzle body and an X-shaped wobbler. It is a one-piece nozzle with the wobbler press-fitted into the body. By adopting a specially shaped wobbler, it achieves a small spray volume and excellent flow distribution. 【Features】 ○ Small spray conical nozzle ○ Adoption of a specially shaped wobbler ○ Achieves small spray volume and excellent flow distribution ○ Made of PTFE (polytetrafluoroethylene) with excellent chemical resistance ○ Injection-molded part made of PVDF (polyvinylidene fluoride) For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (One-Touch Detachable) INJJX" is a conical nozzle with a circular spray pattern and uniform flow distribution. It features a two-part design consisting of the nozzle section and the adapter section. The nozzle section can be detached with a simple one-touch mechanism by rotating it approximately 60°. This easy attachment and detachment reduces maintenance time, and the internal stirrer of the nozzle is also removable. It is made of polypropylene resin, which offers excellent chemical resistance and heat resistance, and the nozzle body can be color-coded based on the spray flow rate. 【Features】 - Circular spray pattern with uniform flow distribution - Can be attached and detached with one hand, excellent maintainability - Excellent chemical resistance and heat resistance - Color identification of the nozzle body based on spray flow rate - Internal stirrer of the nozzle is also removable For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle / Standard Alumina Type JUXP-AL92" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a nozzle with a body and whirler that are sintered together, using an X-shaped whirler for rotation. It has a large foreign object passage diameter, making it less prone to clogging. The section from the whirler to the tip is made of high-purity alumina ceramic, providing excellent wear resistance. It is available in medium to large spray volumes. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Excellent wear resistance ○ Structure that is less prone to clogging ○ Made of alumina ceramic ○ Available in medium to large spray volumes For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Standard Ceramic Type) JUP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It features an integrated design consisting of a ceramic body with excellent wear resistance, a whirler, and a swirl chamber. It uses a disc-shaped lotus root type whirler, a ceramic swirl chamber, and a nozzle tip. It is available in a medium flow range and is ideal for use in industries such as steelmaking and pollution control. 【Features】 - Circular spray pattern with uniform flow distribution - Excellent wear resistance - Disc-shaped lotus root type whirler Uses a ceramic swirl chamber and nozzle tip - Available in a medium flow range For more details, please contact us or download the catalog.

• nozzle

The "Uniform Distribution Nozzle (Standard Type) JJXP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It consists of two parts: the nozzle body and an X-shaped whirler, forming an integrated nozzle with the whirler press-fitted into the body. The structure uses an X-shaped whirler for the swirler, allowing for a large foreign object passage diameter, making it less prone to clogging. It is available in a series ranging from small to medium flow rates, with many variations in materials. 【Features】 - Circular spray pattern with uniform flow distribution - Structure that is less prone to clogging - Series available from small to medium flow rates - Many variations in materials - Uses an X-shaped whirler for the swirler For more details, please contact us or download the catalog.

• nozzle

The "Spillback Nozzle GSPB" is a high flow type of SPB nozzle, designed for a circulating fluidized bed gas desulfurization system, featuring a single liquid high-pressure air cone nozzle (return nozzle). It supplies liquid (water) to the nozzle at a constant pressure and adjusts the spray volume by opening and closing the discharge valve. The turn-down ratio (throttling ratio) of the spray volume is 1:10. This spray nozzle is optimal for gas cooling with minimal changes in particle diameter. 【Features】 ○ Annular spray pattern ○ Variable spray flow rate ○ High flow type of SPB nozzle (return nozzle) ○ Turn-down ratio (throttling ratio) of spray volume is 1:10 ○ Minimal changes in particle diameter For more details, please contact us or download the catalog.

• nozzle

The "SPB Series" spillback nozzle, ideal for temperature control of blast furnace gas and incinerators, allows for flow adjustment while maintaining a constant supply pressure, achieving a turndown ratio of 1:10. The variation in particle diameter between maximum and minimum spray flow rates is extremely small, demonstrating stable gas cooling performance. It is a high-performance return nozzle that meets applications requiring complete evaporation during vapor cooling, as well as spray flow adjustments according to gas flow and temperature changes, enabling high-precision temperature and humidity control. 【Features】 - High turndown ratio (capable of a wide range of flow adjustments) - Uniform fine atomization provides effective cooling and evaporation performance - The change in particle diameter with increases or decreases in spray flow is extremely small. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

• nozzle

The "Uniform Distribution Nozzle (Large Spray / 2 Directions) TWAA" is a hollow cone nozzle capable of 2-directional (180° opposing) spraying, similar to the TAA nozzle (slurry liquid spray nozzle). Since it sprays in two directions, it consolidates what used to require two nozzles into one, simplifying the equipment and saving maintenance time. Made entirely of ceramic, it is lightweight (less than half the weight of metal) and uses SiC (silicon carbide) which has excellent wear resistance. 【Features】 ○ Annular spray pattern ○ Structure that is resistant to clogging ○ Angle type that sprays at a right angle to the inflow direction ○ 2-directional spraying ○ Excellent wear resistance For more details, please contact us or download the catalog.

• nozzle