サーモフィッシャーサイエンティフィック株式会社／Thermo Fisher Scientific K.K. Product Lineup

Many amino acids do not absorb ultraviolet (UV) light, making it difficult to improve sensitivity and selectivity with conventional analytical methods, which are also complicated and lack stability. This technical document introduces a case where a custom injection program feature in the auto-sampler of the Thermo Scientific Vanquish Core HPLC system was utilized to derivatize 20 types of amino acids simultaneously using a pre-column derivatization method for simultaneous analysis. This system enables highly accurate quantitative analysis as it is not affected by the degradation after the derivatization reaction. Validation using commercially available beverages showed that selective quantification was possible even in complex sample matrices such as food. 【Features】 ■ Simultaneous derivatization and analysis of 20 types of amino acids ■ High-precision quantitative analysis achieved through pre-column derivatization ■ Provides good linearity and high reproducibility ■ Selective detection even in complex sample matrices ■ Automation by the auto-sampler avoids human error and improves work efficiency

• Analytical Equipment and Devices

This technical document introduces a rapid and quantitative analytical method for the simultaneous detection of seven types of vitamins (vitamin A, vitamin D2, vitamin D3, and four types of vitamin E isomers) in infant formula using a conventional HPLC system with a diode array detector and a fluorescence detector, following offline solid-phase extraction (SPE) and two-dimensional liquid chromatography (2D-LC) analysis. By changing the traditional liquid-liquid extraction method to solid-phase extraction, the time required for sample preparation was reduced from 3 hours to 1 hour. Additionally, by simplifying the sample preparation and optimizing the separation conditions, the influence of the matrix was reduced, allowing for the detection of target substances with higher sensitivity. ■ Simplified sample preparation through two-dimensional liquid chromatography (2D-LC) analysis ■ Simultaneous separation analysis of vitamins A, D, E, and their isomers ■ Developed a method with higher recovery rates and sensitivity than liquid-liquid extraction ■ Simplified the preprocessing process and reduced analysis time by 2.5 times ■ Reduced the influence of the matrix and provided reliable data

• Analytical Equipment and Devices

Foods containing sugar often have a high content of sucrose, making it difficult to accurately quantify sucrose and other disaccharides (such as lactose and maltose) in actual samples due to insufficient separation. This technical document adopts a single-loop heart-cut 2D-LC method, where lactose and maltose are fractionated in the sample loop after sucrose elutes in the first dimension, allowing for the separation and analysis of lactose and maltose in the second dimension, thereby avoiding the influence of sucrose. Additionally, the charged aerosol detector (CAD) used in the detection allows for gradient analysis, providing greater flexibility in separating contaminants in a variety of food samples, enabling efficient analysis. This achieves high-sensitivity analysis that was difficult with conventional refractive index detectors (RI). 【Features】 - Accurate analysis by separating lactose and maltose in foods containing sugar - Separation from contaminants possible with the single-loop heart-cut 2D-LC method - Charged aerosol detector (CAD) allows for gradient analysis and accommodates diverse samples - Achieves high-sensitivity analysis that is difficult with conventional refractive index detectors (RI)

• Analytical Equipment and Devices

A universal charged aerosol detector (CAD) that measures various analytical target substances with consistent responsiveness can provide consistent area response on chromatograms regardless of the chemical structure of non-volatile analytes, ranging from ions to proteins. Additionally, its wide dynamic range allows for high-sensitivity detection. HPLC-CAD is utilized for the detection and quantification of compounds that are difficult to measure with UV detectors in various fields such as food, pharmaceuticals, and materials science. Please refer to the PDF for practical examples.

• Analytical Equipment and Devices

Are there any issues such as liquid leakage when transporting liquids in bottles by air? One concern when using plastic bottles for air transport is the risk of liquid leakage caused by changes in atmospheric pressure during transit. The Nalgene IP2 bottle is a product that complies with the United Nations recommended standards for transport containers for the storage and transport of important samples. We conduct internal pressure tests that meet the standards of the International Air Transport Association (IATA) for each lot. Additionally, we can issue product certificates for each lot. [Recommended for those who:] ◆ Want to export samples in bottles by air to overseas ◆ May use bottles at higher internal pressures than usual ◆ Have experienced liquid leakage during air transport *If you would like a sample, please indicate this in the inquiry section. For detailed specifications, please download and view the catalog.

• Plastic utensils and containers

Have you ever experienced issues such as liquid leakage when transporting liquids in bottles by air? One concern when using plastic bottles for air transport is that changes in air pressure during transportation can cause liquid leakage. The Thermo Scientific Nalgene IP2 bottle is a product that complies with the United Nations recommended standards for transport containers for the storage and transport of important samples. We conduct internal pressure tests that meet the standards of the International Air Transport Association (IATA) for each lot. To distinguish it from other Nalgene bottles, "IP2" is engraved on the bottom of the bottle. ▼ Certificates can be issued - Product certificates can be issued for each lot. - Internal pressure tests are conducted for each lot, and a quality assurance certificate is attached. ▼ Recommended for customers like these - Those who want to export samples in bottles by air to overseas. - Those who may use bottles at higher internal pressures than usual. - Those who have experienced liquid leakage during air transport. If you would like a sample, please indicate this in the inquiry section.

• Plastic utensils and containers

We are introducing a comprehensive range of lab pH meters/ion meters, electrodes, and consumables. We also provide information on a variety of electrodes and the principles of pH measurement and dissolved oxygen.

• Water quality testing

The Thermo Scientific Sorvall X Pro series universal centrifuge combines powerful basic performance (large capacity & high speed) required for advanced applications with "ease of use" and world-class "safety." You can choose from the tabletop type Sorvall X1 Pro with a capacity of 1.6 L and the Sorvall X4 Pro series with a capacity of 4.0 L. 【Features】 ■ Maximum capacity: 4,000 mL (X4 Pro/X4F Pro) ■ Maximum capacity: 1,600 mL (X1 Pro) ■ Maximum centrifugal force: 25,830 ×g ■ A rich set of rotors to support advanced applications ■ AutoLock system for one-touch rotor fixation (no tools required) ■ Bio-safety compliant rotors that contain aerosols ■ Easy operation via a large touchscreen ■ Advanced features compatible with GMP environments, such as user management and log data memory ■ Reliable safety (compliant with international safety standard IEC61010-2-020) *For more details, please refer to the PDF document or feel free to contact us.

• centrifuge

● Adoption of Peltier elements in the cooling system ● Forced circulation system using a fan ● Equipped with 10 temperature program functions, including 10 steps ● RS232 interface for data output ● Stainless steel interior for easy cleaning and maintenance ● Supports simple customization such as adding shelves and ports *For more details, please download the PDF. Feel free to contact us.*

• incubator

The comprehensive catalog of Immuno Plates, known for its achievements and trust, has been revised. It includes guides on the principles and basics of ELISA, as well as how to select various conditions according to your applications. - Surface treatments (hydrophobic, low hydrophilic, hydrophilic, high hydrophilic surfaces) - Plate shapes (96 well, 8, 12, 16 well modular types) - Well shapes (flat bottom (F), round bottom (U, C), star well bottom) - Plate colors (clear, white, black) Additionally, we introduce the Imobilizer series (Imobilizer Amino, Imobilizer Streptavidin) with surfaces that have covalent bonds through spacers, which offer less steric hindrance than standard surface treatments, a high S/N ratio, and can shorten assay time without the need for blocking. Please download it and check the contents!

• Other inspection equipment and devices
• Plastic utensils and containers
• Other consumables

The Thermo Scientific(TM) Pipette Service Center was accredited in 2009 as a "calibration organization" compliant with the international standard "ISO/IEC 17025" by the Japan Accreditation Board (JAB) for laboratories and calibration organizations. We also offer calibration for pipettes from other brands, not just our own, at the same rates (special models are excluded). ● Suitable for those who: - Need precision management of pipettes due to revisions in regulations or standards - Feel limited by in-house calibration - Are requesting calibration of pipettes from various brands from each manufacturer 【ISO/IEC 17025 Calibration Service Course Overview】 1. Regular Calibration Available for applications of 10 or more units. More cost-effective than spot calibration. Price example) Single-channel: 10,800 yen/unit Multi-channel: 21,600 yen/unit 2. Spot Calibration Available for applications starting from 1 unit. Price example) Single-channel: 14,100 yen/unit Multi-channel: 24,100 yen/unit *Standard delivery time is approximately 2-3 weeks for 20-30 pipettes.

• pipette
• Other physicochemical equipment

The meaning of the operation buttons on the safety cabinet is hard to understand! I don't know when to replace the HEPA filter! I don't know how to respond when the warning lamp is lit! Have you ever had such experiences? Based on over 150 years of clean air technology, we have prepared a model that fuses "comfortable operability" and "information management functions" without compromising on "safety." Herasafe 2030i 【Features】 ● Easy operation with a full-color touch panel interface ● Automatically adjusts air flow balance and displays air flow speed ● Fully open sash design allows for cleaning and installation of large equipment ● Log management and user passcode settings available ● NSF/ANSI 49 international standard certification ● Supports data collection via OPC-UA ● Custom modifications available Maxisafe 2030i 【Features】 ● Unique triple HEPA filter with dust collection efficiency 100,000 times better than standard safety cabinets ● For handling chemotherapy drugs and prions ● EN 12469 international standard certification (European standard) ● Supports data collection via OPC-UA ● Custom modifications available

• cabinet

We are pleased to announce the release of the slide materials from the seminar program "Basics of Ion Chromatography," which was popular at the Dionex IC Technology Seminar 2019 - Basic Course on Chromatography! This seminar focuses on understanding and acquiring essential foundational knowledge related to analysis, such as the principles and theories of ion exchange separation and the basic components of the equipment, making it suitable for beginners in ion chromatography.

• Analytical Equipment and Devices

Have you ever had trouble with liquid retention in pipette tips? Our Thermo Scientific(TM) ART(TM) Low Retention Tips have the following features: - High hydrophobicity of the inner wall effectively suppresses hydrophilic adsorption of samples. - No risk of leaching as it is not processed with coatings or additives. - Effective even with small volumes and highly viscous liquids. Additionally, we received a 90% satisfaction rate from customers who tried our samples (according to our research*). Here are some feedback highlights from customers who have actually used the product: - The residual beads during immunoprecipitation have been significantly reduced, leading to an expected increase in final sample yield. - Solutions containing surfactants were expelled completely without residue. There was no significant decrease in hydrophobicity even with frequent pipetting. - There are no complaints from those involved in cell culture or protein work. We encourage you to try this comfortable ART Low Retention Tip for yourself. *According to our research Results from 151 customers who used samples provided by us between July 2016 and December 2016.

• pipette

The "Savant SpeedVac SPD1030/2030" is an integrated centrifugal concentration system that combines essential elements for concentration, such as a concentrator, cooling trap, diaphragm pump, and vacuum gauge, into a compact single unit. It is designed to be installed within a standard laboratory fume hood. This device is compatible with various rotors, accommodating containers such as microcentrifuge tubes, vials, microplates, and large-capacity flasks. 【Features】 ■ Achieves rapid concentration and efficient solvent removal performance ■ Increases vacuum levels and adjusts pressure appropriately to suppress bumping, maintaining sample integrity ■ Unified design and intuitive user interface ■ Bright, intuitive, and easy-to-understand display ■ Allows customers to set up to three new programs *For more details, please refer to the PDF materials or feel free to contact us.

• Concentration Equipment
• Drying Equipment

The "Savant SpeedVac DNA130" is a compact, integrated centrifugal concentration device developed for applications such as DNA and RNA. It allows for the rapid and safe concentration and drying of nucleic acids, PCR products, and synthetic oligo samples. Low-volume sample preparation can also be easily performed using this device. The new program feature allows for the storage of three different methods. 【Features】 ■ Compact and user-friendly design ■ Up to three methods can be set and saved ■ An external post-trap that neutralizes ammonium hydroxide vapor can be installed ■ Allows for the drying of delicate DNA/RNA samples at room temperature or with slight heating ■ Ensures data integrity and transfer via download from a USB port *For more details, please refer to the PDF materials or feel free to contact us.

• Concentration Equipment
• Drying Equipment

We have created a quick reference guide as a pH electrode selection guide that summarizes information to help you choose the Thermo Scientific(TM) Orion(TM) pH electrodes tailored to your needs! It includes various electrodes suitable for different samples, ranging from standard electrodes to those resistant to chemicals, physically durable ones, micro-sampling, food applications, and viscous samples. Choosing the right electrode for your application is crucial for obtaining accurate and stable measurement results. Please make use of this as a tool for electrode selection. [If you would like a demo of the pH meter, please use the inquiry form below.]

• Analytical Equipment and Devices
• Other physicochemical equipment
• Water quality testing

The laser ablation (LA) system equipped with a high repetition frequency laser and a galvanometric optical system, connected to the robust Thermo Scientific iCAP MX series ICP-MS, enables the acceleration, high precision, and expansion of elemental analysis capabilities. ■ Simplification and acceleration of elemental analysis - Solid sample surfaces are sampled using laser irradiation and analyzed directly with ICP-MS. - Complicated operations such as cleaning of instruments for traditional solution pre-treatment, and management of reagents and waste are no longer necessary, reducing costs, workload, and environmental impact. ■ Achieving sensitivity and precision equal to or greater than solution ICP-MS - Elimination of weighing errors and contamination during traditional pre-treatment, as well as interferences caused by acids or solvents during measurement, enhances precision. - High sensitivity is achieved through rapid ablation. - Flexible and highly precise quantification methods can be applied, allowing for quantitative analysis even without standard samples of the same material as the sample. ■ Expansion of ICP-MS analytical capabilities - Analysis of a wide range of samples, including difficult-to-dissolve samples, powder samples, and non-conductive samples, is possible. - Wide-area 2D/3D elemental imaging is achievable, covering areas of several square centimeters and depths of several hundred micrometers. - Accurate analysis is possible through imaging based on quantitative concentrations.

• Analytical Equipment and Devices

◆Measurement of Zinc Oxide in Sunscreen Using Ion Chromatography with Visible Absorbance Detection◆ Sunscreens are classified as over-the-counter (OTC) drugs in the United States, and zinc oxide is one of the active ingredients that has received approval from the U.S. Food and Drug Administration (FDA) for use in sunscreens (with a maximum concentration of 25%). Zinc oxide is a powdered mineral that adheres to the outermost layer of the skin, acting as a broad-spectrum blocking agent that scatters, reflects, and absorbs ultraviolet radiation, providing protection from both UVA and UVB radiation, making it unique among sunscreen ingredients. The United States Pharmacopeia (USP) has developed monographs for FDA-approved drugs, including OTC medications, and is working to obtain the necessary information to maintain high-quality pharmaceuticals. It has also initiated a global effort to update many existing monographs across all official methods. As part of this USP initiative, the addition of an ion chromatography (IC) method for zinc measurement in General Chapter <591> is proposed. This method will serve as an alternative to the existing titration-based analytical methods in the monographs for zinc-containing pharmaceuticals. *Please download from the catalog at the bottom of the page.*

• Analytical Equipment and Devices

At the Thermo Scientific(TM) Pipette Service Center, we calibrate pipettes from various brands under the same conditions and at the same rates as our own pipettes. We support customers who are struggling with pipette management, as requesting calibration from each company individually can incur costs and effort, and there can be variations in delivery times depending on the manufacturer. 【Course Overview】 1. ISO/IEC 17025 Calibration Service To comply with quality system requirements, we issue ISO calibration certificates. Price example) Single-channel 14,100 yen/piece Multi-channel 24,100 yen/piece 2. Inspection Service We conduct inspections under the same conditions as our factory and issue inspection result reports. Price example) Single-channel 4,800 yen/piece Multi-channel 11,800 yen/piece *Full channel inspection for multi-pipettes For the multi-channel pipettes in the above courses, we conduct full channel inspections, ensuring peace of mind.

• pipette
• Other physicochemical equipment

【Triple Quadrupole Mass Spectrometer Lineup】 ■Thermo Scientific TSQ Altis Plus LC-MS/MS for high-sensitivity pharmacokinetics testing and biopharmaceutical analysis ■Thermo Scientific TSQ Quantis Plus LC-MS/MS for pharmacokinetics testing and analysis of pesticides and toxic substances requiring high sensitivity ■Thermo Scientific TSQ Fortis Plus LC-MS/MS for analysis related to environmental and food safety, as well as toxic substance analysis *The liquid chromatographs that can be connected range from general-purpose UHPLC to nano-flow LC for high-sensitivity analysis, two-dimensional LC for automated sample preparation, multi-channel LC for throughput improvement, and ion chromatography suitable for the separation of ionic compounds, allowing you to choose according to your analytical needs. Of course, these systems can be operated seamlessly with a single software.

• Analytical Equipment and Devices

This document introduces the "Titration Method for Total Acid Value in Petroleum Products Using Automatic Titration Equipment." The total acid value (TAN) of petroleum products is measured using the pre-programmed "T3 TAN Method." The sample is dissolved in a specified solvent and directly titrated to a pre-set endpoint at pH 11 using an alkaline titrant prepared with isopropanol. A blank is analyzed and automatically subtracted. [Contents (excerpt)] ■ Keywords ■ Program ■ Introduction ■ Recommended Equipment ■ Required Reagents and Solutions, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

This document introduces the "Titration Method for Total Acid Value in Petroleum Products Using Automatic Titration Equipment." The Total Base Number (TBN) in petroleum products is measured using the pre-programmed method "T4 TBN Back." After dissolving the sample in a specified solvent, a standard perchloric acid (PCA) reagent is added. The sample is then back-titrated to the equivalence point using an alkali titrant prepared in glacial acetic acid. The back-titration complies with ASTM D2896, providing a fast and reliable endpoint. [Contents (Excerpt)] ■ Keywords ■ Program ■ Introduction ■ Recommended Equipment ■ Required Reagents and Solutions, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

By using the Click Container, easy sample collection is achieved! Safe sample transportation! A 95 kPa vacuum test is conducted as a leak prevention feature: compliant with UK standard BS EN 14401. Leak tests are conducted: compliant with UK standard BS EN 14254. ● Convenient cap and body packaging for small animal dissection and laboratory use. ● Separate packaging for cap/body that is useful for automatic dispensing of solutions such as formalin, boric acid, and sodium thiosulfate in histology, urinalysis, and water analysis applications. ● Sterilized individual packaging convenient for use in clean rooms and similar environments. ● Easy-to-remove dispenser box type.

• Resin container

We will introduce analytical instruments that play an important role in quality checks and food analysis in general, including food ingredients, containers and packaging, functional components, flavors, and tastes. ◆ Example Applications ◆ 01 Carbohydrates 02 Bitter components 03 Lipids 04 Polyphenols 05 Antioxidant capacity measurement (ORAC method) 06 Organic acids 07 Amino acids 08 Foreign substances 09 Food contact materials 10 Identification of origin and raw materials 11 Odor analysis 12 Natural toxins 13 Allergens 14 Trace element analysis

• Analytical Equipment and Devices

We will send you a free sample kit in a box containing various bottles. Please use it to check and evaluate the compatibility of vials and bottles. If you would like a sample kit, please select "Request Sample" from the "Contact Us" section at the bottom of the page. Thermo Scientific Nalgene bottles reduce the risk of liquid leakage without gaskets due to their unique structure of bottle neck sealing and cap threading. Additionally, pressure tests are conducted for each lot to ensure there are no leaks. The main plastic resins are registered with FDA DMF numbers. They can be used for storing pharmaceuticals and high-quality liquids, as well as for domestic and international transport. We offer a wide range of sizes tailored to various applications, including 0.5 mL micro vials, 2 L, and 20 L. Both non-sterile and sterile products are available. The sample kit box contains various small bottles ranging from 10 to 60 mL, vials from 0.5 to 2 mL, dropper bottles, immuno plates, and transfer pipettes. *Please select "Request Sample" from the "Contact Us" section to apply.

• Other consumables

The Thermo Scientific(TM) Orion(TM) Star T910 pH automatic titration device measures the titratable acidity (TA) of orange juice as citric acid equivalent using the pre-programmed "T1 TitraAcidity" method. This application note introduces the method for measuring titratable acidity in orange juice using the automatic titration device. It provides detailed information on recommended equipment, the setup of the titration device, method modifications, and maintenance of the equipment. [Contents] ● Recommended equipment ● Required reagents and solutions ● Setup of the titration device ● Preparation of electrodes ● Sample preparation ● Sample titration ● Results ● Titration range ● Method modifications ● Titrant ● Maintenance of equipment and electrodes *For more details, please download the PDF.

• Analytical Equipment and Devices
• Other physicochemical equipment

◆Analysis Applications for Food Contact Materials and Food Packaging◆ Food contact materials include plastics, paper, wood, composites, glass, and metals, and there is a risk of substances such as chemicals and metals migrating from these materials into food. Regulations regarding these materials are complex, so it is necessary to efficiently monitor and control them using appropriate analytical methods. The eBook introduces various analyses of food contact materials, and you can access detailed information through the links in the document. ◆Workflow for Identification and Quantification of Unknown Impurities in Medical Devices, Pharmaceutical Packaging, and Food Contact Materials◆ Components that can cause harm by contaminating products, not only in food contact materials but also in pharmaceutical packaging materials, need to be highly controlled. In addition to explanations of a wide variety of contaminants, from volatile substances to high molecular weight non-volatile molecules and even metals, we also introduce the products necessary for analysis. *Please download from the catalog at the bottom of the page.*

• Analytical Equipment and Devices

The Dionex ICS-6000 HPIC system is a high-performance modular ion chromatography system with high reliability. Its robust system design allows for operation at up to 5,000 psi, providing consistently reliable results. As a high-end model of ion chromatography systems, it is designed for users looking to expand the possibilities of ion analysis. 【Features】 ■ High-speed, high-resolution, high-sensitivity analysis ■ Modular design compatible with all applications ■ Capillary IC compatible ■ Can be combined with eluent generators ■ Settable for 2 channels ■ Remote operation via tablet *For more details, please refer to the PDF materials or feel free to contact us.

• Analytical Equipment and Devices

The Vanquish Duo HPLC system achieves increased productivity and uptime without compromising the high performance, robustness, and ease of use that the Vanquish platform offers. Furthermore, it enables a deeper understanding of samples and allows for a quicker return on investment. 【Features】 ■ Three configurations possible by combining the Vanquish platform: ・Tandem LC: A system for effective utilization of detectors ・Dual LC: Two completely independent LCs realized in a single device ・Reverse gradient system: A system for quantitative analysis using charged particle detectors ■ The dual autosampler's injection unit is completely independent to avoid cross-contamination ■ Regulatory-compliant operating environment with Chromeleon *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

This is a triple quadrupole mass spectrometer designed for high robustness, operability, and accurate quantitative analysis of complex matrix components found in samples such as food. 【Features】 ■ Maintenance-friendly OptaMax NG ion source ■ Sweep cone that reduces contamination in the ion source ■ Matrix separator ion guide introduction system ■ Neutral blocker that enhances robustness ■ Active collision cell that avoids crosstalk effects in multi-component analysis and improves sensitivity ■ Segment quadrupole that enhances consistency in ion behavior ■ Compatible with a method library for 440 pesticide components *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The Q Exactive UHMR quadrupole mass spectrometer boasts significantly improved sensitivity and high m/z mass resolution, providing a unique high-performance analytical solution suitable for studying the structure and heterogeneity of protein complexes. The Q Exactive UHMR mass spectrometer can perform native intact mass analysis and top-down analysis, offering structural details that cannot be elucidated by other methods. This enables a deeper understanding of protein functions, disease mechanisms, potential therapeutic targets, and biotherapeutic compounds.

• Analytical Equipment and Devices

The tribrid structure optimizes data accuracy and high qualitative capabilities, including various MSn analyses, for low molecular identification and structural analysis. The newly implemented data acquisition algorithm, AcquireX, selectively and automatically acquires comprehensive and high-quality mass spectra for a wide range of low molecules. 【Features】 ■ Equipped with quadrupole, Orbitrap, and ion trap ■ Resolution of 500,000 (FWHM @ m/z 200) ■ Two dissociation methods: CID and HCD ■ High-speed switching measurement for positive and negative ions ■ Dynamic scan management function ■ Built-in internal standard substance introduction system (optional) ■ Calibration and analysis parameters optimized for low molecular analysis ■ Automated efficiency of MSn spectrum acquisition by AcquireX ■ Assisted CE for real-time optimization of collision energy during analysis *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The Thermo Scientific Orion Star T910 pH automatic titration system is designed to enhance laboratory productivity by automating titration. By combining our core electrochemical technology with an advanced reagent dispensing system, we have achieved automated titration that is easier, more reliable, and more reproducible than manual methods. Please use the Orion Star T910 pH automatic titration system for applications such as the following acid-base titrations: • Titration acidity of juices and wines • Acidity of food • Alkalinity of water • Acidity and alkalinity of consumables • Total Acid Number (TAN) • Total Base Number (TBN) *Free rental is available. (Please contact us for details.)

• Analytical Equipment and Devices
• Other physicochemical equipment

The "Thermo Scientific(TM) Orion(TM) 2111XP Online Sodium Meter" has a long track record of sales in the field of industrial water in power plants and various plants, demonstrating reliable measurement performance in various analyses. To meet the stringent needs for ultrapure water measurement and high-acid cation exchange applications with a single system, we offer measurement application packages including an ammonia package, a diisopropylamine (DIPA) package, and a cation/high-acid package. 【Features】 ■ Detection limit of 0.1 ppb ■ Prevention of corrosion-related impacts ■ Easy to use with simple operation ■ High visibility unaffected by lighting conditions thanks to a large display ■ Incorporates ROSS Ultra electrode technology for high measurement stability ■ Ability to add a pH or ORP measurement module as a second channel ■ Option for a grab sampler available *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

Thermo Scientific(TM) Nalgene(TM) lab supplies are an excellent alternative to glass in many life science research labs. As general-purpose plastic products, we offer a wide range of items, including: ● Flasks ● Beakers ● Funnels ● Graduated cylinders ● Burettes ● Others We also provide fluoropolymer products that are inert to almost all chemicals and have exceptional resistance to temperatures from low to high. Innovative features enhance safety in research environments, such as beakers with handles, chemical identification cleaning bottles that make contents easy to see, and graduated cylinders designed to minimize rolling when stored on their side, making them widely used as labware. You can choose from various plastic materials, sizes, and designs to suit your application. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

We have compiled a comprehensive guide on the analytical methods for chemical compounds found in food contact materials and food packaging. We introduce various analytical methods tailored to the measurement targets. You can directly access more detailed technical information through the links in the eBook. ■ FCM and food packaging material solutions ■ Fast solvent extraction ■ GC and GC-MS ■ GC-HRAM ■ HPLC and UHPLC ■ LC-MS ■ LC-HRAM ■ Elemental analysis ■ Peer-reviewed academic

• Analytical Equipment and Devices

The "Workflow for the Identification and Quantification of Unknown Impurities in Food Contact Materials, Pharmaceutical Materials, Packaging Materials, and Contact/Sealed Materials" is a catalog published by Thermo Fisher Scientific, which mainly engages in the export and import sales of analytical instruments and maintenance services. The analysis of impurities in packaging materials involves a wide variety of chemicals, ranging from volatile substances to high molecular weight non-volatile molecules, and even metals. The inspection requires absolute reliability in the identification and quantification of unknown substances. This document provides an explanation of food contact materials and pharmaceutical contact/sealed materials, along with products that are useful for inspections, such as the "TriPlus 300 Headspace Autosampler." [Contents] ■ Overview (Food Contact Materials / Pharmaceutical Contact and Sealed Materials) ■ Volatile Substances ■ Semi-volatile Substances ■ Non-volatile Substances ■ Elemental Impurities *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

In "Antibody Analysis and Characterization of Antibodies: New Solutions," we cover terms related to biopharma, as well as charge variant analysis and more. Additionally, we introduce solutions for the characterization of monoclonal antibodies (mAb) and biopharmaceutical analysis. [Contents] ■ Terms related to biopharma ■ Introduction - Characterization of monoclonal antibodies (mAb) ■ Workflow for biopharmaceutical development ■ Quantification by affinity ■ Aggregate separation *For more details, please refer to the PDF document or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment
• Other analyses
• others

The "SOLA SPE Cartridge and Plate Technical Guide" outlines the features of the solid phase extraction (SPE) "SOLA," which enables cleaner and more consistent recovery without frits, achieving excellent reproducibility. It also includes advantages compared to conventional SPE. Additionally, we introduce general extraction procedures and product information for SOLA. [Contents] ■ Technical Information ■ Improvement of Reproducibility and Recovery Rate ■ Increased Sensitivity and Reduced Solvent Consumption ■ Clean Extraction *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• others

The "Vanquish CAD・Corona Veo Technical Guide" is a catalog published by Thermo Fisher Scientific, which mainly engages in the export and import sales of analytical instruments and maintenance services. The Charged Aerosol Detector (CAD) achieves high sensitivity detection with consistent responsiveness regardless of the chemical structure of the analyte, and a wide dynamic range. This catalog includes the principles of the Charged Aerosol Detector, as well as applications such as glycan and adjuvant. [Contents] ■ Charged Aerosol Detector (CAD) ■ Principles of the Charged Aerosol Detector ■ Applications ■ Glycan (non-derivatization method) ■ Adjuvant *For more details, please refer to the PDF document or feel free to contact us.

• others
• Other inspection equipment and devices

This application note introduces a workflow for the differential analysis of whiskey using the Thermo Scientific Orbitrap Exploris GC 240 mass spectrometer. By combining HS-SPME Arrow with high-resolution full scan measurements, we efficiently profile different origins, aging periods, and types through mass spectrum deconvolution and statistical analysis. The high mass resolution and precise full scan analysis enhance the reliability of counterfeit prevention and quality control. 【Features】 ■ High-precision analysis excellent for detecting counterfeits and adulteration ■ Profiling of whiskeys from different origins, aging periods, and types ■ Efficient identification of chemical differences through a non-targeted statistical workflow ■ Efficient sample extraction and analysis using SPME Arrow ■ Accurate identification through high mass resolution full scan measurements and mass spectrum deconvolution

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices
• others

The Thermo Scientific Orbitrap Exploris GC mass spectrometer demonstrates excellent performance in pesticide analysis in baby food. This system provides high selectivity and sensitivity with mass resolutions set at 30,000 and 60,000, accurately detecting low concentrations of pesticides from complex sample matrices. The QuEChERS method using citrate buffer was employed for sample preparation. This technical document presents the performance evaluation results of linearity, sensitivity, mass accuracy, and ion ratios for 18 types of pesticides in baby food extracts. All pesticides were detected and identified at the lowest standard concentration of 0.005 mg/kg, with mass accuracy showing high reliability within 1.5 ppm across all concentration levels. 【Features】 ■ Accurate mass measurement at high resolution ■ High selectivity and sensitivity even in complex sample matrices ■ Easy data acquisition and analysis using Thermo Scientific Chromeleon chromatography data system (CDS) software ■ Good linearity with a coefficient of determination of over 0.99 ■ Mass accuracy within 1.5 ppm across all concentration levels

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices
• others

This technical document introduces a workflow for metabolomics analysis using the Orbitrap GC-MS system and Compound Discoverer software. Data acquisition through EI full scan with a mass resolution of 60,000 and data extraction and deconvolution analysis with Compound Discoverer accurately extracts peaks characteristic of the sample. It also includes statistical analysis functions to identify differences between sample groups, designed to allow visual confirmation of results. Furthermore, the workflow for identifying unknown compounds using precise mass information from EI, PCI, and MS/MS quickly lists candidate compounds by comparing mass accuracy within a few ppm, PCI's adduct ion information, and in silico MS/MS fragment information. Features: - The Orbitrap GC-MS HRAM metabolomics library includes information on over 800 metabolites and Kovats retention time information. - Compatible with commercially available integer mass libraries. - Reliable compound identification using precise mass information from EI, PCI, and MS/MS. - Detection of component differences through multivariate statistical analysis and pathway analysis.

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices
• others

This technical document introduces a highly sensitive quantitative analysis method for volatile perfluoroalkyl substances (PFAS) in environmental samples. By combining the Thermo Scientific Orbitrap Exploris GC high-resolution accurate mass spectrometer with Thermo Scientific SPME Arrow fibers, PFAS in complex environmental samples can be efficiently analyzed. This method allows for the detection of low concentrations of PFAS compounds with high sensitivity while minimizing sample pretreatment. Furthermore, by utilizing HRAM full scan data, both targeted compound quantification and non-target analysis can be achieved, rapidly expanding the analytical scope. In actual sample applications, PFAS compounds were detected in all samples, with particularly high concentrations confirmed in untreated wastewater and landfill leachate. 【Features】 ■ High sensitivity and high selectivity analysis through high-resolution accurate mass spectrometry ■ Efficient sample pretreatment using SPME Arrow ■ Flexible data processing with full scan data ■ Low LOD (0.1–1.4 ng/L) meets stringent reporting limits ■ Detection of a wide range of PFAS compounds in complex environmental samples

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices
• others