シロ産業 Product Lineup

● The floor is reinforced, allowing for the entry of motorcycles and small agricultural machinery. * Please place plates such as iron sheets under the bike stands and tires to prevent deformation. ● It is resistant to moisture due to the front and rear ventilation openings. ● Can be locked using a padlock. (Padlock not included) ● Equipped with a ceiling skylight. ● Comes with 2 corner shelves (installation locations can be chosen from 8 options). ● DIY assembly is possible.

● Achieves high cold retention/insulation with a three-layer structure of polyethylene, foamed polyurethane, and polyethylene ● Improvement in hygiene due to cold retention and heat retention ● The surface is smooth, making it difficult for dirt to adhere, easy to clean, and hygienic

Drum can of JIS Z 1600 standard

■Features ● It is a compact cooler. ● Power supply: AC100V, DC12/24V ● Power consumption: 40W ● Set temperature: -20 to 20℃ (temperature that can be set) ● Cooling method: Compressor type ● Cord length: AC approximately 1.9m, DC approximately 3.4m

For storing stock tires, a dedicated tire storage facility that utilizes a fully open design is recommended. ● Assembly, installation, block, and anchor work are separate.

● This sheet has heat insulation, waterproofing, and light transmission properties. ● The weather resistance lasts about 3 to 4 years. It can be used as a protective sheet or cover for long-term use.

High-grade product with enhanced strength. This sheet combines heat insulation, waterproofing, and light transmission properties. It can be used particularly as a heat-insulating sheet or cover for long-term use, with a weather resistance lifespan of approximately 5 to 6 years.

■We solve such troublesome issues. ●We significantly cut down on the hassle of handing over documents with clients and within the company. Just drop them in the input slot, and the distribution task is completed in no time. ●We effectively guard against information leaks from other boxes. With individual keys, we ensure that information is securely protected until it reaches the recipient. ●We efficiently collect submissions at universities and vocational schools without hassle. Each person simply drops their items into the post. This allows for a focus on work and improved efficiency. ●We facilitate smooth handling of items in areas with strict security. By providing individual keys, we can eliminate cumbersome tasks such as identity verification during handovers, thereby increasing reliability.

● Long-lasting cooling and heating capabilities (※1) ● High durability and airtightness ensured by rigid polyurethane injection molding ● Compatible with all manufacturers' one-box vehicles (※2) ● Customization available. Additionally, by selecting optional items, you can create an original cooling and heating storage unit ● Temperature management without the need for power by using cooling agents, heat storage materials, and dry ice ● Structure that does not require opening and closing the door during sudden braking. Equipped with a stopper to prevent the cooling unit from moving

●Slide rack internal dimensions Height of the enclosure: 35mm, Width: 697mm, Depth: 499mm ●The double suspension rail, handle, and rail installation have the same mechanism as the deluxe type.

The manufacturing standards strictly comply with OSHA regulations (OHS 29 CFR 1910.106) as well as the EN standards (EN 14470-1:2004) issued by a third-party organization in Germany.

■Peace of mind and safety: Standard equipped with a lock ●Cylinder lock standard equipment ■Two types of legs: fixed type (adjuster type) and movable type (caster type) The lower part of the main body is equipped with adjusters, allowing for level adjustment with the floor surface, making it easy to achieve horizontal alignment. Equipped with casters for easy movement. (For simple movement. Please use on a level surface.)

Made of high-density polyethylene with excellent chemical resistance. It can be washed thoroughly, allowing for clean use. Due to its very sturdy one-piece molding, the top of the cabinet can also be used as a workspace.

Seismic-resistant structure Built-in double safety device Adoption of ball slide rail

Temporary storage for hazardous materials and industrial waste Drum storage for 2 or 4 drums (Factory assembled / On-site assembly) Leak-proof pallet Also convenient for storing large plastic containers Helps improve the aesthetics of the premises.

● Easy operation with 1 & 2 STEP: Just add water and press a button. ● Fast ice-making in about 6 to 13 minutes: Ready whenever you need it. ● Two sizes available: S and L. Ice in a hole-punched cap shape made to suit your needs.

By removing the lower central partition, you can store not only drums but also entire wagons and other items.

Refrigerated transport box for COVID-19 vaccines There are two types: a refrigerated type with a temperature of 2-8°C and a frozen type below -15°C, each available in three variations.

Stopper function, snap lock, handle, with drain cap In the case of installation on a ship, if the container is full (with fresh fish, ice, water, etc.), there may be instances of water leakage depending on the ship's movement. Please be aware of this in advance.

This is a storage cabinet with a cart for one-gallon cans. It can store both one-gallon cans and pails. The upper section features a sliding shelf for easy access. The upper section has a sliding shelf, and by using a one-touch fuel supply valve, it can be used as a server at a convenient height. Additionally, the bottom section can hold four one-gallon cans as a spare on top of the cart.

This is a freezer capable of maintaining -60°C in medical institutions, research facilities, and companies. - Rapid freezing with an innovative low-temperature system - Low noise operation at 43dB - Achieves a 30% increase in energy efficiency and approximately 50% energy savings through optimization of the non-Freon cooling system.

■Features ● This is a large trunk case designed for the storage and transportation of electronic devices with excellent shock resistance. ● The exterior is made of FRP material and plywood, the frame is constructed from aluminum profiles, and the corners are reinforced with steel, creating a robust structure. ● It is equipped with swivel casters with stoppers, making it easy to transport. ● The caster receiving brackets at the four corners of the top allow the trunk case to be stacked while the casters are attached. ● The interior is finished with melton fabric, and the inside of the lid contains polyurethane foam. ● It complies with RoHS standards and does not use materials such as PVC that contain harmful substances hazardous to the environment and human health.

Keeps ice for up to 4 days. With its incredible insulation power, you can enjoy ice-cold drinks even in the scorching heat of the outdoors. *The condition may vary depending on the surrounding temperature and contents.

Introduce as many as needed and easily stackable. Solves the storage problem of personal belongings in a free address environment. Individual lockers that are easy to introduce in any location. Can be introduced in the necessary quantity starting from one unit. Lightweight and easy to carry. Simple and convenient stacking.

Built-in 15600mAh battery for flexible use. 30L large capacity. A portable refrigerator/freezer that can be easily carried anywhere and used freely. The internal temperature can be set freely from 20°C to -20°C. ● This portable refrigerator/freezer can cool down to -20°C in 1°C increments, powered by a car accessory power supply or a portable power outlet. ● It features a quiet and low power consumption design, so you won't be bothered by noise or vibrations. ● Compact yet high-powered, making it ideal for outdoor activities and disaster preparedness. ● The estimated operating time from room temperature to freezing is about 15 minutes. ● The main panel includes one USB output port for charging smartphones. ● With a large capacity of 18L, it is safe for transporting frozen foods and ice cream. ● Storage estimate: 4 bottles of 2L PET, 16 cans of 500ml, 24 cans of 350ml.

The assembly efficiency has improved due to the "back panel insertion structure," which allows for easy access to the diagonal of the main body. It is possible to use the grooves on the sides (in the width direction) as shelves. The shelves can be adjusted in increments of 50mm.

Product Category: Folding Insulated Box Material: Aluminum Coated Sheet Color: Silver Insulation Material: Foam PS 30mm Thickness

● This is a "vacuum insulated cooler box" that pursues a color scheme that blends naturally and usability. ● It has high cold retention capabilities, especially using vacuum insulated panels on all sides, allowing it to maintain a cold state for about 40 hours in an environment of approximately 40°C, making it suitable for long outdoor scenes. ● Approximately 55 hours of cold retention (M661VCS-40 type) ● Approximately 40 hours of cold retention (M661VCS-20 type)

It is a portable refrigeration and insulation storage unit. Equipped with a dedicated sealing handle. It always maintains a high level of sealing and durability.

● With one key, you can lock all the drawers at once. ● The inside of the handle has a built-in stopper lever. Unless this lever is operated, the drawers cannot be opened. This is one of the safety devices that protects the contents from drawers popping out due to earthquakes and from the cabinet tipping over.

●Easy to assemble and disassemble by one person ●Lightweight yet sturdy low-foam EPS material ●Excellent insulation performance with thick walls and a secure fit ●Insulated cold storage container with a pallet that can be used with a forklift ●Light-blocking and external air-blocking with the included plastic pallet cover

● A compact compressor refrigerator with excellent cooling performance and a capacity of 12L. ● The internal temperature can be set from 20°C to -20°C. ● Can store 9 round 500ml PET bottles or 12 square bottles upright. ● Cooling capability that reaches 0°C in about 12 minutes from 20°C and -20°C in about 25 minutes. ● Equipped with a USB port for using USB-powered products. ● Usable in a wide range of vehicles from passenger cars to trucks. ● Features low voltage protection to prevent battery drain. ● Can be used in various outdoor scenes such as camping or car trips with a portable power source. Additionally, it provides peace of mind as a backup during emergencies or power outages.

Suitable for cold chains that require strict temperature control. ■M4041C-DF25KT Features ● It uses a lightweight and compact Stirling cooler with excellent cooling performance. ● It is a completely non-Freon type that uses helium as a refrigerant, making it environmentally friendly. ● With a power consumption of 48W (DC12V), it can cool down to -40°C, making it energy-efficient. ● It can be powered by both a car's DC12V power supply and a household AC100V power supply. ● The vacuum insulation material minimizes temperature fluctuations inside the unit, providing excellent cooling performance. ● It can cool from 30°C to -40°C in about 5 hours (at an ambient temperature of 25°C). ● It comes with a hasp for a padlock (padlock not included). ● Temperature can be set in 1°C increments.

● Comes with 2 adjustable shelves ● The doors are sliding and removable ● The handles are foldable, making it easy to clean.

It is a box with an opening and closing top and front. In the case of a tall box, it can be difficult to retrieve contents from the top. In such cases, using the K type with an opening and closing front can improve work efficiency. The L type cold storage box only opens and closes at the top. For shorter boxes or when used inside outer boxes like folding containers, we recommend the L type that only opens and closes at the top.

Lightweight and economical type, ideal for storing and managing a variety of items in small quantities.

It's boring just to tidy up. A storage case that can also be a photo frame.

●It has superior insulation compared to regular cooler boxes. ●Low power consumption ●Compatible with various power sources DC12/24V power, portable battery (optional), AC100V power (optional) ●It is used with the cooling unit and portable battery placed on top. *It is assumed to be used mounted on a cart in practice. *The cart is not included. Please prepare it yourself.

This is a locked locker with a wiring hole that is convenient for charging smartphones and other devices. It is a locker of suitable size for storing smartphones, wallets, keys, and small pouches. It is ideal as a valuables locker for employees in the back yard.

●Safety 　・The door cannot be opened even if the lock is destroyed by a lot rod. *(Note)* 　・The lock cannot be removed unless it is locked. (No forgetting to lock) 　・The handle knob does not move when in a locked state. ●Double opening (convenient for loading and unloading chemicals) *(Note)* ●Seismic fixing brackets ×2 *(Note)* ●This product can also be used for storage rooms and safes. ●The shelves are movable. *(Note) Excludes M2203S-1K* *An optional leak-proof tray is also available.*

●This is an ideal storage cabinet for managing and storing hazardous substances, toxic substances, and general pharmaceuticals. ●Includes 2 L-brackets for fall prevention.

■With punching panel The upper three sides of the storage cabinet and the back of the door are equipped with a punching panel, allowing for the organization and storage of tools using hooks, etc. (Tools are not included) The punching panel (side) is adjustable at 50mm pitch.

Aluminum Specification The outer and inner materials are made of aluminum (anodized). The durability, insulation capability, corrosion resistance, and ease of use of the box are exactly the same as the current product.

● It is a PVC pharmaceutical cabinet/storage that excels in corrosion resistance, durability, and chemical resistance. ● It uses Kaidac, which has ten times the impact resistance of regular PVC.