シロ産業 Product Lineup

This is an introduction to the "Ultrafine Wind Speed Sensor" handled by Shiro Sangyo, a specialized online shopping site for measuring instruments, packaging equipment, and logistics equipment, which selects and provides better products and services from around the world. 【Features】 ○ Capable of bidirectional measurement, allowing capture of airflow direction indoors ○ Can accurately measure ultrafine wind speed without being affected by room temperature or wind temperature ○ Method: Thermal (thermistor) ○ Response time: Time constant within 1 second ● For other functions and details, please download the catalog.

●Automatic power off after 20 minutes to save energy ●Includes storage case

● Easy setup and measurement with smartphone/tablet This device uses Bluetooth to wirelessly display measurement data on a smartphone/tablet. By using the app on your smartphone/tablet, the operation is intuitive and easy, unlike previous measuring instruments. To use it, simply turn on Bluetooth on your smartphone/tablet, launch the app, and press the button on the probe. This allows for measurement, and you can also obtain necessary calculated values in application mode. The smartphone/tablet is compatible with both Android and iOS devices. ● Graphical display and data storage/transmission By using the app on your smartphone/tablet, you can display not only the current measurement values but also trend graphs and reports in a graphical format, as well as log displays. Even in current value display, it is possible to show values from multiple probes and calculated values simultaneously. Measurements can be taken as single or continuous measurements, and the measured data can be saved in PDF/Excel format (Android only) and sent via email. The app supports multiple languages, including Japanese, with a total of 11 languages available.

● Affordable and easy-to-use probe separation type ● Large display with simultaneous temperature display

● Wind speed, temperature, humidity, and CO2 can be measured with one device. ● The CO2 measurement uses a highly accurate NDIR sensor. ● Equipped with a large 100mm fan, it is suitable for low speeds as well.

● Achieved top-class measurement accuracy of 2% for thermal anemometers The high measurement accuracy of 2%, which is said to be difficult to achieve with conventional thermal anemometers, is produced by high-performance wind tunnel equipment. Calibration is conducted by verifying in two ranges: low wind speed from 0.05 to 3 m/s and high wind speed from 3 to 50 m/s, minimizing the variation in wind tunnel speed and ensuring high measurement accuracy and reliability. ● Extended product warranty period to a maximum of 2 years To allow more people to experience our high quality, we have implemented a long-term manufacturer warranty of 2 years. ● Beautiful color design and functionality that dispels the image of measuring instruments A new color design that eliminates the mechanical image associated with conventional measuring instruments. We have adopted a blue backlit LCD that excels in visibility. The back side is coated with rubber to enhance grip and prevent slipping.

- Lightweight and easy to handle, allowing one person to easily perform airflow measurement tasks. - Wide airflow measurement range: 85 to 4,250 m³/h - Simple design with a full-color LCD that is easy to read and use. No complicated calculations are needed. The airflow is displayed immediately after pressing the start button. (Temperature and humidity are also displayed simultaneously.) - Capable of determining the flow direction at intake and exhaust points. - Data logging function for up to 3,000 readings. - Measurement data can be saved with individual ID management. - Built-in back pressure compensation function to ensure accuracy at high airflow rates. - Equipped with atmospheric pressure compensation function. - Transparent hood allows for easy alignment with the air conditioning vent. The standard hood is made of transparent material, making it easy to align with the air conditioning vent. The hood is foldable, taking up minimal storage space. - Five types of optional hoods to choose from based on application. A standard hood measuring 610×610mm is included. Additionally, five other hoods of different sizes are available (sold separately). - Optional stand that can accommodate high ceilings. A stand that can be extended from 1.2 to 2.5m is available (sold separately).

Wind direction output DC4-20mA Wind speed output DC4-20mA

The MI1T-888BF hot wire anemometer is an affordable device that can measure wind speed, airflow, and temperature all in one. It is capable of measuring very low wind speeds. Wind speed can be displayed in five units: m/s, km/h, knots, mph, and ft/min. The MI1T-888BF features a zero pressure calibration function, maximum and minimum value memory, hold function, and automatic average calculation for each measurement point and specified measurement time, along with a backlight that makes the readings visible in dark conditions.

Industry first! LCD display Strong against noise with digital processing Allows for customizable average wind speed settings. Can display and record on a PC compatible with RS-232C Equipped with up to 3 alarm contacts.

■PC Interface ● By connecting models with data logger functionality (MD7A-522RCT, MD7A-522YBT) to a PC, you can transfer the measured and recorded data to the PC. ● You can create graphs of the imported data using dedicated software or convert it to Excel format.

The M2536T-FD series, based on the manufacturer's patented technology, features an extremely robust design without moving parts, promising maintenance-free operation for several years with 99.9% data acquisition even in harsh environments. ● Improved accuracy through the latest design technology Adopting innovative design technology has led to better control of airflow and improved accuracy. Through software enhancements and a state-of-the-art calibration wind tunnel, the M2536T-FD series achieves a high level of accuracy in wind direction and speed measurement. ● Can be directly mounted on a Φ33.7mm pipe. ● Maintenance-free The aluminum alloy body provides high durability against corrosion, dust, ice, sunlight, and bird attacks. The dust and water resistance standards adapt to changes in air temperature, pressure, and humidity. ● Compact and lightweight portable design The M2536T-FD series is very compact, with a height of 162mm and a weight of 380g, making it convenient to carry. ● This sensor has RS485 or a 4-20mA current output, and the output data can be provided in m/s, km/h, or knots.

●Explosion-proof function ・Can be used in explosion-proof areas (ATEX compliant) ●Data logging function ・Storage of 40,000 measurement data points and PC output ・Large LCD with excellent operability and touch keys

● It enables accurate vibration monitoring with a compact, low-cost design and a maximum of two levels. ● Vibration modes can be selected internally via a switch for acceleration, velocity, or displacement. ● The housing features a drip-proof aluminum structure, and cables can be secured with a cable gland (equivalent to IP64). ● Alarm level settings can be adjusted in 1% steps within a range of 1% to 99% using an internal digital switch. ● An alarm delay of up to 60 seconds can be set to prevent false alarms. ● It can monitor vibrations in rotating machinery, plant equipment, large structures, and more.

●The observation data indicates instantaneous, average wind speed, and maximum instantaneous wind speed over 10 minutes, visually displaying fine wind movements with a level meter. ●In addition to analog output, it features RS-232C output and three wind speed alarm functions, with significantly improved noise resistance due to digitization. ■Features ●It can measure wind speeds from light winds (0.5 m/s) to strong winds (60 m/s). The average wind speed can be set to change between 1 to 600 seconds. ●Digitization has significantly improved noise resistance. ●It supports both AC and DC power supplies, and the DC power can be used with 12/24V batteries. ●It can simultaneously display instantaneous, average, and maximum instantaneous wind speeds over 10 minutes. ●Standard features include analog output (4-20 mA) and RS-232C output. ●It has three wind speed alarm outputs, with alarm values that can be set arbitrarily in menu mode. ●It is equipped with a built-in lightning arrester, enhancing surge resistance against induced lightning and other surges.

● Waterproof and weather-resistant IP67 case / Long-lasting battery type [approximately 1 year (once a day)]

- This is a vibration meter with ISO severity judgment functionality designed for technicians responsible for the daily maintenance of equipment. It is calibrated for sensitivity using a standard calibrator (159Hz, 10m/s²) at the time of shipment, so you can use it with confidence. - Easy and simple measurements for anyone - Compact and reachable even in tight spaces - Quick measurement/judgment (within 1 second) - Constant adjustment of pressing force during measurement - Achieves high-quality measurements without individual differences - Equipped with ISO severity judgment functionality - Immediate judgment with four levels of color coding

● Easy data utilization with SD card support (Excel data) ● Sampling interval can be certified from 1 second to 3,600 seconds ● Stationary measurement possible with rear stand

●Vibration measurement of machinery and equipment ●Measurement of vibration velocity and acceleration

●Resolution of 0.005 m/s² (0.5 gal) ●Calibration certificate compliant with ISO standards can be issued ●Includes user-friendly software for elevator ride comfort analysis (in Japanese/English) ●Equipped with a 3.5-inch color LCD, waveform can be confirmed on the main unit

● The measurement range is from 2 m/s to 90 m/s, and it can be used similarly to general anemometers. ● The operating temperature range is wide, from -40°C to +50°C. ● It features an energy-saving design that directly heats only the area around the wind speed detection unit. ● Certification according to the Meteorological Business Act can be obtained.

● The grinding sound during fine processing such as jig grinding and molding grinding can be accurately heard. ● It is possible to check the bearing sound and abnormal sounds of rotating machine parts.

For vibration detection, a compact and lightweight piezoelectric pickup is used to detect vibration acceleration, and an electrical method is employed to obtain velocity and vibration displacement. This vibration meter is designed from the user's perspective and demonstrates its effectiveness in field measurements for maintenance inspections and quality control of all industrial machinery, including machine tools, aircraft, electric motors, and compressors.

■Diverse Notification Functions (Instant Wind Speed): Measures the wind speed every second (MAX): Displays the maximum wind speed at the time of measurement (MIN): Displays the minimum wind speed at the time of measurement (AVE): Displays the average wind speed over 10 minutes (CLASS): Displays the Beaufort wind force scale HOLD: Retains the wind speed data when the HOLD button is pressed. (SENS): Displays the perceived temperature of the link BATTERY: Flashes to indicate when it's time to replace the battery.

It is compact and lightweight, making it convenient for on-site measurements. Additionally, it features a large analog display, allowing for easy visibility of even the minute vibrations that change constantly, and it is very simple to operate. It also has a built-in integration circuit, enabling measurements in three modes: acceleration, velocity, and displacement. Designed with the user in mind, this vibration meter demonstrates its effectiveness in on-site measurements for maintenance inspections and quality control of all industrial machinery, including machine tools, aircraft, electric motors, and compressors.

Measurement of gas flow velocity in low to high temperature environments Measurement of flow velocity and flow rate of water, liquids, fuels, etc. Measurement of flow velocity of exhaust gases, biogas, corrosive gases, etc.

■ Thorough pursuit of measurement convenience ● Realization of hands-free measurement through the adoption of a "new concept" shoulder bag case that thoroughly pursues usability ● Airflow calculation and measurement functions for average, maximum, and minimum ● Integrated probe with extension rod for easy measurement at heights and inside ducts

● Wind speed, air volume, temperature, dew point temperature ● Backlight function ● One-touch display of maximum and minimum values ● Real-time PC measurement with the included USB cable ● Tripod mounting screw hole

One device can measure wind speed, temperature, and humidity.

● Wind speed measurement range: capable of measuring from 0 to 200 m/s ● Temperature measurement range: capable of measuring in environments from -10 to 140℃

■Features ●Measurement in Dusty Atmospheres and High Humidity Environments This is a highly durable sensor that does not use moving parts or heaters, making it very unlikely to be damaged by wear or adhesion from dust. Therefore, it is capable of measuring wind speed in dusty environments. Additionally, it can measure flow rates in high humidity, condensation environments, and corrosive gases. In cases of dust adhesion, cleaning is also possible. It can be used in explosion-proof areas (ATEX certified). ●Applications Air, exhaust air, activated sludge air, natural gas, exhaust gas, process gas, biogas, incinerator gas, flare gas, engine exhaust gas for transport machinery, exhaust gas from semiconductor manufacturing equipment, and flow rate and flow measurement of various other gases. ●Measured Gases Single or mixed gases such as air, nitrogen, oxygen, steam, carbon monoxide, methane, natural gas, ammonia, argon gas, biogas, exhaust gas, etc. For other gases, please inquire.