シロ産業 Product Lineup

This is an introduction to the "Rotary Scribers Height Gauge" handled by Shiro Sangyo Co., Ltd., a specialized online shopping site for measuring instruments, packaging equipment, and logistics equipment, which selects and provides better products and services from around the world. 【Features】 ○ ABS/INC measurement ○ Judgment function ○ The measuring surfaces of the two scribers that "rotate" are on the same plane ○ As it is an Absolute (ABS) type, there is no need to zero set every time the power is turned on ○ Zero setting can be done at any position, allowing for comparative measurement ○ Easy reading with digital display ● For other functions and details, please download the catalog.

This series is a non-contact optical measuring device that uses a visible light semiconductor laser with a wavelength of 635nm (red). It combines a special collimator lens and a slit lens with an LD element (laser semiconductor), and has been thoroughly designed for electrostatic protection, noise reduction, and heat dissipation, resulting in a compact, lightweight, and highly efficient series with good convergence. Additionally, it has been designed with sufficient consideration for current control to achieve a long lifespan. The mounting bracket is optional.

The MI1DU-267M, being a dual type, can measure the coating thickness on various coatings on magnetic metals (iron, steel, ferritic stainless steel) and non-magnetic metals (aluminum, aluminum alloys, copper, austenitic stainless steel).

Measurement range: 5cm to 200m Measurement accuracy: ±1.0mm Japanese keyboard

It is approximately 50% lighter than the standard type.

The height will be measured based on the extended length.

It is convenient for measuring vehicle height at the transportation bureau's land transport division, ferry companies, police stations, etc.

The high-speed clock board M138RM-3500MH has successfully increased the reading count of rare lasers reflected from a distance dramatically.

■Features ● Real-time viewing, management, and transfer of measurement results on smartphones and tablets. * Installation of the measurement app (paid) from the App Store or Google Play is required. * Compatible environments: iPhone/iPad with iOS 5.0 or later, smartphones/tablets with Android 2.2-4.3 ● High-precision distance measurement from short to long range with one touch! The inclination sensor performs high-speed calculations based on the straight-line distance obtained. With simple mode selection, you can instantly derive various measurement values such as "horizontal distance" and "height of the target" without any difficulty.

● This model has excellent cost performance. ● Compact digital camera size... it's a cute thickness gauge. ● It supports two-point adjustment. ● It also supports statistical functions.

●Compact design ●Maximum long-distance measurement of 2900m ●Highest accuracy: ±4cm ●Accurate measurement with a focused beam of approximately 15cm at a distance of about 46m ●High-speed data communication ●Class 1 eye-safe laser ●Shock and vibration resistance compliant with MIL-STD-810

●Diverse measurement functions ・Smart area ・Smart horizontal distance ・Smart angle ・Width measurement between two points ・Diameter calculation ・Triangle and trapezoid area ・Straight-line distance, area, slope, Pythagorean (2 points, 3 points), 　　angle, width, height ・Photo area measurement ・Stakeout (equidistant measurement)

●Easy for one person Just "sandwich," "pass through," and "touch" the measuring object, then simply turn the wheel! ●Compact & Accurate A user-friendly wheel with a diameter of 5cm and easy-to-read digital display Reduces measurement and reading errors! ●Compatible with various shapes and materials Great for measuring areas in home improvement stores, craft shops, and renovation sites in construction Highly effective in all kinds of settings!

●Automatic power off ●Low battery indicator ●Basic calibration ●Zero calibration / Two-point calibration ●Maximum / Minimum measurement ●Average / Difference measurement ●Single measurement / Continuous measurement mode switch

Measurable distance: 5 to 1600 meters, 5 to 1189 meters Maximum displayable distance: 1760 meters, 1300 meters

The ultrasonic thickness gauge/M1458TS-60FS can measure the thickness of various metal and non-metal materials (such as glass, ceramics, plastics, etc.). It allows for easy measurement of the thickness of different materials through which ultrasonic waves propagate. It can store up to 10,000 measurement data points and save up to 100 sets of configuration conditions. It is ideal for thickness measurement and corrosion/thinning inspection, featuring a coating cancellation function (measuring only the base material without measuring the paint film). This is a state-of-the-art ultrasonic thickness gauge with a lightweight and compact design: only 0.6 kg and dimensions of 105 mm × 180 mm × 42 mm.

■Features ● Coating cancellation function included ● Capable of measuring both thickness and sound velocity with one device ● Measurement sensitivity adjustment function (manual and automatic) ● Two-point calibration possible ● A-scan (waveform) display available ● B-scan display available (only for M1458FT-59S) ● Large and easy-to-read LCD screen (LCD size 70mm × 114mm) ● Measurement data can be saved up to 10,000 points (M1458FT-59S can save up to 20,000 points) ● Data transfer to PC with included software ● Rechargeable with over 6 hours of measurement capability ● Compact design with dimensions of 105mm × 180mm × 42mm and weight of 600g

There are no difficult operations involved, so anyone can easily perform measurements, making it useful not only for product inspection but also for inspections during the process.

Full lineup with 8x and 10x magnification. Without hesitation, it rushes through the scene.

●Easy-to-understand guide display screen Messages are displayed on the LCD screen. It provides simple and clear guidance on the operation steps. ●Upper/Lower limit limit function (MC29AC-PRS) For each registered measurement line, a set of limit values can be configured. If the set value falls outside the upper/lower limit range, it will notify you with blinking limit values and an alarm. This is useful for quickly determining whether the coating is within the range specified by management standards during production processes in factories. ●Large-capacity measurement value memory function (MC29AC-PRS) With the data memory function, even multi-point measurements that involve thousands of film thickness inspections per day can be performed by one person for measurement and recording tasks. This helps reduce labor in inspection work and cut costs. The memory capacity is 20,000 points, allowing work to be carried out without worrying about remaining memory. Measurement data can be saved in subdivisions such as groups and blocks. ●Compact body reduces fatigue during long hours of work With a probe-integrated design, the body is sleek and slim. Weighing approximately 125g, it is lightweight, reducing fatigue even during long measurement sessions.

■World's first touch panel laser rangefinder ■Equipped with a 4x zoom digital point finder to confirm distant targets ■Measures width, area, and diameter of circles from a distance using images ■Record photos and screenshots of measurement screens can be transferred to a PC via USB ■In addition to height tracking and horizontal distance measurement, it can perform various measurements such as slope length, trapezoidal measurement, and height profile (unevenness measurement).

● A film thickness gauge capable of measuring ferrous substrates. Convenient handheld size. The MB8G-13ERT also supports measurements on non-ferrous metal substrates. ● Equipped with an upside-down display function, making it easy to check results during overhead measurements. ● Features two types of self-calibration functions: standard calibration and zero calibration. ● Includes an "alarm setting mode" function that alerts you with sound when values exceed the set upper/lower limits.

●This is a laser distance meter that does not require a specified reflector. It measures the distance to the target (0.05m to 60m) by directing a laser beam at the target's surface and calculating the phase difference of the reflected beam. It can also be used as a liquid level gauge for colored fluids. The output options are RS422/RS232 and 0/4-20mA.

■Features ●Measurement distance: 0-9999.9m (with 1-9cm scale) ●Measuring wheel circumference: 0.5m ●Forward (addition) and backward (subtraction) measurement ●Easy one-handed operation with brake and reset function on the handle ●Convenient foldable storage for portability ●Compact space-saving design suitable for measuring between walls (R = wheel radius = 79.5mm) ●Movable pointer for accurately confirming the starting and ending positions

With an ergonomic design and simple operability, it becomes an ideal measuring tool in production sites and quality control labs. ● Capable of measuring non-ferrous materials up to 24mm in thickness ● Compatible with all types of packaging materials, including glass and plastic bottles and containers ● Suitable for complex-shaped composite materials, aluminum, and titanium parts used in aerospace and automotive manufacturing ● Exceptional accuracy through digital signal processing ● Direct data import into evaluation software is possible ● Equipped with AI-based rapid calibration functionality