シロ産業 List of Products and Services

Simple analysis by just placing the sample in a dedicated reagent kit ● Compact and lightweight ● Battery-operated (with remaining charge display) ● Portable and easy to operate ● Printer connection available ● Low cost ● Comes with an easy analysis manual

●LCD display screen ●Supports the following titration modes: SET (preset) and MAT (manual titration). ●Includes a stirrer. ●A glass burette can be used for volume measurement. ●A glass burette can be used.

The MF2MRM-97115H-1 is a portable spectrophotometer that combines accuracy and ease of use. It achieves high precision and reliability through an advanced optical system, and is designed in a compact size. It is truly a design that condenses technology. For aquaculture and aquariums, it can measure ammonia, nitrite nitrogen, nitrate, pH, alkalinity, calcium, magnesium, and phosphate all with this one device (reagents are used for each measurement item). ● Advanced optical system with a beam splitter ● Validation of the device with NIST-traceable validator ● Navigation function for measurement procedures ● Automatic data storage function for up to 200 data points ● Ability to assign locations to stored measurement data ● Waterproof case with IP67 rating (the insertion part for the glass cell is also waterproof) ● Backlight function for better visibility ● Battery level (%) is constantly displayed on the screen ● Time setting is possible (year, month, day, and time)

● IP67 dustproof and waterproof rating. ● "Auto-lock function" to hold the measurement after the values stabilize. ● Backlight function. ● One-point calibration possible with ORP standard solution (e.g., 235mV/25℃). ● Suitable for various water quality investigations (e.g., factory wastewater, monitoring pollution in reservoirs and rivers) and for school laboratory equipment.

- Capable of measuring conductivity/TDS (total dissolved solids)/salinity with a single device. - IP67 dustproof and waterproof resistance. - "Auto-lock function" that holds the measurement value after it stabilizes. - Backlight function. - One-point calibration possible with conductivity standard solution (e.g., 1413 μS/cm). - Suitable for various water quality surveys (e.g., factory wastewater, monitoring pollution in reservoirs and rivers) and for school laboratory equipment.

● IP67 dustproof and waterproof rating. ● "Auto-lock function" to hold the measurement after it stabilizes. ● Backlight function. ● Coefficient correction available: atmospheric pressure (700-1400) / salinity (0.0-40.0g/L) ● For various water quality investigations (e.g., factory wastewater, pollution monitoring of reservoirs and rivers) and for school laboratory equipment.

A model that prioritizes performance and cost reduction. The embedded TOC analyzer Aplus is a simple TOC meter that can continuously measure trace amounts of organic matter in ultrapure water. While it has sufficient measurement performance, its embedded design significantly contributes to cost reduction.

Measurement items: pH, ORP, electrical conductivity (low efficiency, concentration), dissolved oxygen Application fields: water supply, food industry, aquaculture/aquariums

Measurement items: pH, ORP, electrical conductivity, electrical resistivity Application fields: Salinity, TDS (total dissolved solids), optical dissolved oxygen

●Can measure 5 items with one device DO / oxygen saturation / water temperature / pH / ORP can be measured with one device. ●Simultaneous display of DO and pH ●RoHS compliant Achieved lead-free soldering. The circuit board uses lead-free solder. (However, this excludes the sensors) *Please note that the DO detector and pH detector cannot be placed in the same tank for measurement.

● Cartridge-type DO sensor Easy maintenance cartridge-type sensor ● Display digit change function Can change from two decimal places to one decimal place ● Long-life DO sensor Minimized cathode to achieve long life

If it is possible to easily measure multiple components in inspection water, it is a concentration meter. It can measure residual chlorine, pH, cyanuric acid, total alkalinity, calcium hardness, and bromine.

●Detection of residual chlorine by DPD method. ●Measurement of free residual chlorine and total residual chlorine is possible. ●Drip-proof design ensures safety even if water splashes.

This device is a dissolved ozone meter that can measure the concentration of ozone dissolved in liquid up to a high concentration of 3 mg/L during processes such as sterilization, disinfection, and oxidation. The measurement principle employs a photometric method with an LED light source and a photodiode in the detection section, incorporating the latest optical technology for high performance in measuring dissolved ozone.

With one device, you can measure free residual chlorine, total residual chlorine, pH, and cyanuric acid. For measuring residual chlorine, we use powdered DPD reagents, ensuring safe usage. By measuring free residual chlorine and total residual chlorine, you can also determine combined residual chlorine. We offer a multifunctional water quality meter at a low price. The automatic zero calibration makes operation easy. The main unit and reagents are delivered in a hard case.

It is possible to directly insert the sensor into the soil to measure soil pH and temperature. It can be used with a smartphone (compatible with Android & iOS) app. The sensor part can be replaced in case of damage or malfunction.