シロ産業 List of Products and Services

● Equipped with a diamond grip for easy operation and scratch prevention (only for M623LA411-WK and M623LA411Y-WK)

■Features ● Excellent cushioning due to air-filled tires! ● Gray tires that are less likely to dirty the floor. ● Can be made puncture-proof by adding AFG (thermoplastic resin). Moreover, cushioning is not compromised.

Handle folding flat

● Utilizing the characteristics of stainless steel, it is clean, highly durable, and suitable for reuse. ● It has excellent chemical resistance and is widely used for containers of corrosive liquids such as pharmaceuticals, food, and alcohol. ● It is suitable for containers of solid pharmaceuticals and food that dislike cycles, as interior coating is unnecessary.

Quiet, smooth, lightweight, and gentle on people - the silent series.

■ The wire mesh is treated with PP coating to enhance durability and noise reduction (R) performance. ■ A lid can be installed as an option.

The MG20SR-H type has a fixed width, while the MG20SR-X type allows for width adjustment in three stages.

■Features ● Both lifting and moving can be done with this compact device. ● Excellent operability similar to a hand truck. ● Steering is very light and easy to balance. ● Operation is extremely simple. ● The device can load onto trucks and platforms by itself. ● Prevents labor loss. ● Can prevent fines related to safety and health regulations concerning physical stress. ● No tail lift required. ● Various interchangeable loading platforms make operation at building entrances easy.

The waterproof container case has achieved IP67 waterproof and dustproof ratings, as well as NATO standard Defense Standard 81-41 Level J. Its durability has led to its adoption by military, police, and fire departments around the world. It is already in use by some units of the Self-Defense Forces.

Transportation of long materials such as timber.

●The vehicle body stretches to twice its size. ●The six-wheel structure provides excellent maneuverability. It can turn easily.

●Excellent maneuverability due to the 6-wheel structure. Direction changes are effortless. ●3×6 shaku materials fit perfectly.

● Achieves long-lasting cooling with overwhelming cold retention performance. The cold packs themselves last longer than conventional products. When combined with commercially available coolers, they can maintain cooling for about 30 hours. ● You can choose the optimal cold retention range for quality preservation. The powerful cold packs are available in three types: -18℃, 0℃, and +3℃, within the range of -18℃ to +3℃, adjusted by component formulation. This allows for management at the optimal temperature range for each transport item. * Generally, cold packs require about a 10℃ temperature difference to freeze in a freezer. For example, for the 0℃ type, a freezer that can maintain -10℃ is essential. However, the -18℃ type is specially developed to freeze even with a relatively low temperature difference and can be frozen in a typical freezer at around -23℃. * Basically, each temperature type is made to order. * The temperatures indicated by the type names are reference values showing that they can be maintained within the surrounding temperature ranges, and do not represent the actual maintenance temperature of the product itself.

■Main Features ●Easy-to-Grip Handle The handle is easy to grip and has a good texture, allowing for easy opening and closing. ●Hydraulic Damper Even women and the elderly can easily and safely open the upper door with minimal effort. ●Snap Lock A simple lock is installed to prevent easy illegal dumping.

●Easy-to-grip handle The handle is easy to grip and has a good texture, allowing for easy opening and closing. ●Hydraulic damper Even women and the elderly can easily and safely open the upper door with minimal effort. ●Well-ventilated panel Adopts round hole aluminum punching on the front. It has good ventilation and prevents unpleasant odors from garbage. ●Snap lock A simple lock is installed to prevent easy illegal dumping.

The front door can also be removed, making it easy to clean inside the trash can.

●One-touch The upper door opens easily with just one finger. It opens slowly, so it's safe.

●Foot pedal Simply press the pedal lightly with your toes to open the upper door.

We added three-sided panels and a stopper front door to the steel transport vehicle.

●Deck board reinforced type that eliminates concerns about insufficient strength due to its patented special structure. ●No fumigation treatment required, easy to recycle, significantly reducing processing costs.

By adding a bellows to the standard type, we enhance the safety of the operator and prevent accidents before they occur. ◆◇◆Features◆◇◆ ● Hydraulic cylinder ● Casters with brakes (except for GLH-150, which has double stoppers) ● Foot pedal operated ● Equipped with an overload prevention device※1. ● Bellows-style full cover ● Fast-forward device included (switches at approximately 20% load)※2 ● The release handle has a spring-back mechanism. ● In case of emergency, simply releasing the handle will stop the descent. ※1 It will not rise if overloaded. ※2 Depending on the model, this may be optional. ◆◇◆For more details, please request materials or contact us◆◇◆

Step section with checker plate × 3 steps ■Material ●Main body = SUS 304 1.5t 40×40 square pipe ●Reinforcement = SUS 304 1.5t 40×40 square pipe ●Step plate = SUS 304 2.5t checker plate ●Asha Star Sugatsune MKPS-32M10 ■Step plate (SUS304 2.5t checker plate) ◆◇◆For more details, please request materials or contact us◆◇◆

■Allowable Load■ ●On one side of four columns, it is safe up to 5 tons, and up to 10 tons on both sides. When used on one side only, it will be approximately 1/2 (2.5 tons). ●The allowable load is proportional to the number of columns. ●A sufficient safety margin has been provided, but please absolutely avoid loading beyond the allowable load.

Step ladder cart

This is an introduction to the all-stainless steel cart handled by Shiro Sangyo Co.

This is an introduction to the low-height work chairs handled by Shiro Sangyo Co.

This is an introduction to the low-height work chairs handled by Shiro Sangyo Co.

With firm compression and secure tying! A compact compressor that achieves an easy-to-carry compressed size.

The installation space is minimal, solving your worries! Firmly compressed, securely tied! Easy to carry in a compact size!

- Price competitiveness and comprehensive features - Pursuing convenience and being environmentally friendly - Perfect safety quarantine system - World-class technological capabilities

Achieve a natural finish with putty that matches the material. Quick repairs with just a simple application.

You can quickly create sandbags just by soaking them in water. They absorb water and become sandbags immediately. No soil is needed; they turn into sandbags in 3 minutes.

Four times the strength of concrete. A concrete repair material that hardens in about 15 minutes.

Just fill the hole and step on it, a material for repairing uneven road surfaces.

A large glass panel, made thicker for durability, can support a heavy load of up to 500 kg. Back panel: 1200×1200 mm.

With the thickening of glass plates, we have created a sturdy and large heavyweight that can hold up to 1 ton. Back panel dimensions: (H) 1500 × (W) 1600 mm.

This is a lightweight and durable one-way dunnage bag made by laminating cross film onto craft sheet. The outer bag is made of strong craft paper and cross film, while the inner bag uses HDPE, which has excellent airtightness.

● Since it can ascend and descend simultaneously with two units, it allows for easy height adjustment at a low cost for large workpieces. ● By using a ball screw type AC motor, it is possible to operate the two lifters almost evenly at the same time. ● It is ideal for securing work lines. ● Low price comparable to hydraulic lifters. ● 3-phase AC 200V power supply. ● Bellows-type full cover (indicated by J at the end). ● Foot switch with LED. ● Maximum usage frequency of 80 times/hour; maximum startup frequency of 10 times/minute. ● Equipped with upper and lower limit switches. ● Supports continuous use for up to 100,000 times.

- Since it can raise and lower two units simultaneously, it allows for easy height adjustment at a low cost for large workpieces. - By using a ball screw type AC motor, it is possible to operate two lifters almost evenly at the same time. - It is ideal for securing a work line, among other applications. - Priced comparably to hydraulic lifters. - 3-phase AC 200V power supply. - Bellows-style full cover (indicated by J at the end). - Foot switch with LED. - Maximum usage frequency of 80 times/hour and maximum startup frequency of 10 times/minute. - Equipped with upper and lower limit switches. - Capable of continuous use for 100,000 cycles.

Features the lowest height among table lifts.

Pallet-specific table lift with built-in power unit Table lift perfectly sized for pallets

Hydraulic Lifter (Manual) MD18HF-H1000-16T ■□■Features■□■ ■Load Capacity: 1000kg ■Type: Manual / Electric ■Uniform Load: 1000kg ■Load Center Distance (LC): 450 ■For more details, please contact us.

Rikako MD18G-1T ■□■Features■□■ ■Two types of wheels available ・26×2 1/2 air-filled tires (spoke wheel) ・26×2 1/2 solid tires (steel wheel) ■Maximum load capacity ・350kg ・500kg ■For more details, please contact us.

Surprisingly quiet operation! Silent plastic cart ■□■Features■□■ ■Resin transport cart ■Adoption of silent casters significantly improves noise reduction ■Ideal for nighttime work and noise control in offices ■Suitable for the food industry to suppress rust ■Lightweight for easy portability ■For more details, please contact us.

Glides smoothly with light force! Silent plastic cart ■□■Features■□■ ■Runs surprisingly quietly ■Resin transport cart, noise-reducing type ■Equipped with drum brakes for safe travel and stopping on slopes ■Automatically stops when the handle lever is released, preventing accidental release ■For more details, please contact us.