シロ産業 List of Products and Services

Prevention of excessive cooling with natural wind using water! Automatic swing function with left and right oscillation!

● No heat emission, 220W energy-saving and eco-friendly type ● Gentle and refreshing breeze for the body ● Effective for heatstroke prevention ● Provides a cooling effect of 3°C to 9°C

●Built-in circulator The circulator pushes warm air forward significantly. ●Blow-out angle adjustable to 45° upward and 10° downward.

●Easy to move Equipped with a convenient handle. ●Adjustable blowing angle of up to 17° up and down ●Cord holder Can store cords neatly.

Far infrared desk panel heater

Equipped with exhaust duct that can be easily connected to commercially available ducts (φ150) ■Main usage locations ●Cooling for workspaces, waiting areas, etc. ●Temperature control in factories ●Air conditioning and cooling inside maintenance workshops

Pressure regulation, household outlet Temperature and humidity management, heatstroke prevention, dust suppression Compact body mist sprayer Wide range spraying & gentle cooling Covers a wide area despite its small size Hose length: up to 30m Spray nozzles: 15 units

Are you having trouble at the construction site of the freeze prevention band? ● Not sure which heater to use for the resin pipe ● The heater is too thick and installation is a hassle ● The power cord is too short We will solve it immediately.

● A type that can be safely used for both hot water supply pipes and hot water pipes. ● Uses a thermal lead switch with a long lifespan and high energy-saving effect. (M2789H-500N to M2789H-4000N, M2789HP-500N to M2789HP-4000N) ● Adopts a blister pack that makes the product easy to see. (M2789H-500N to M2789H-6000N) ● Equipped with an indicator lamp that clearly shows the power supply and power status. (M2789HP type) The power indicator is displayed with a red LED. The power status indicator is displayed with a green LED. (Indicates the operation of the thermostat.)

●Warm your feet properly In outdoor settings like terrace seating, no matter how many heating devices are installed, there has never been a heater that can safely warm your feet. The recommended heater here is a foot warmer. It warms your feet thoroughly. Its waterproof feature is its greatest characteristic, allowing it to be used outdoors. Additionally, the protective mesh part has a special coating that prevents it from getting hot to the touch. With features like oscillation and an automatic shut-off function in case of tipping over, this is an affordable heater specifically designed for warming your feet.

Cordless rechargeable heater vest. Equipped with a built-in nano metal fiber heater for warmth. Adopts a switchable shoulder heater to keep both shoulders and neck warm. Warmth felt in about 8 seconds, cordless and lightweight, 100g battery, approximately 0.6 yen per use, hand washable, water-repellent finish, far infrared rays are easily absorbed by the body, allowing you to experience warmth like that of sunlight.

We will improve the environment of the fish processing plant with a new heating device. The fish processing plant needs to maintain a consistently low temperature, and the workers there have had limited options for warmth, making improvements to the workspace a long-standing concern. Therefore, we propose the waterproof infrared heater (M2758WA-061BCS) designed for the food processing industry as a localized heating solution. It is fully waterproof and can be easily installed, allowing for relatively low-cost improvements to the workspace.

For heatstroke prevention during work in the scorching sun. It is a misting evaporative cooling fan for forklifts.

Motor specifications: 3-phase 200V 50/60Hz Blade diameter: 50, 60 cm Total of 5 models

● This is a round stove that warms you up while being surrounded. Please use it in an atmosphere like that of a "bonfire." ● The far infrared rays (heat rays) emitted abundantly from the "Hilex" far infrared heater reach and generate heat regardless of outside temperature or wind, providing an ideal heating effect. ● The heater features a new type of heating element with a high nickel steel pipe, which is strongly coated with ceramics. It will not break even if accidentally impacted or knocked over. ● It uses five casters for stable and smooth movement. (With locks) ● Equipped with an off timer for more convenient use.

● The large capacity makes it easy to achieve localized heating and insulation indoors. ● The far-infrared rays (heat rays) abundantly emitted by the "Hilex" far-infrared heater provide an ideal heating effect that reaches and generates heat regardless of outside temperature or wind. ● The heater features a heating element that is environmentally friendly, with ceramics firmly coated on high-nickel steel pipes. It will not break even if accidentally struck or knocked over. ● The heat dissipation surface can be fixed at any position from vertical to 90° upward. ● It comes with casters for easy mobility (with locks). ● Equipped with an off-timer for more convenient use.

● It can be used outdoors. ● It has a sturdy frame structure. ● It is silent by design. There are no sound sources during operation. ● It uses far-infrared radiation (Hilex) heaters as a heat source. It warms up very efficiently and does not break even under impact. ● The output can be switched. ● It has casters for easy movement.

- Equipped with a newly developed outdoor combustion unit, the radiation efficiency has increased by approximately 29% for the city gas type and approximately 25% for the LP gas type, resulting in improved warmth. (Data calculated based on inspection data from the Japan Gas Appliance Inspection Association.) This is a comparison with our conventional SPH-500 series. - Considering use in various environments, we have adopted a new design that features a combustion guard integrated with the unit. - We have newly adopted a dual-pole continuous spark ignition method, enhancing the speed and stability of the ignition performance. Patent pending.

Throughout its long history, "fire" has played an important role in promoting communication among people, providing "healing" and fostering "affinity." We design attractive spaces where people can "gather" and "interact." LP gas 10kg cylinder type.

●Easy connection: Simply connect the heater to the power supply and insert the sensor to control the temperature. ●Easy operation: There are only two switches for operation, one for increasing the temperature setting and one for decreasing it. The microcontroller will handle the automatic operation. ●Easy installation: It can be fixed with a clamp or hung for use. ●Covers a wide temperature range: It covers a temperature range from 0℃ to 750℃ in one range. ●Excellent control characteristics: With a microcontroller, stable control is guaranteed. ●Equipped with output side short-circuit protection: If the load (heater) is shorted, the short-circuit protection device will activate and safely cut off the power supply.

●Drenless Equipped with a function to evaporate drain water. No need for troublesome water tank handling. ●Anywhere Air Conditioning Compatible with various layouts. Installation and relocation are also easy.

Equipped with a convenient remote control.

■Merits ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Available in various types and sizes to suit the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple

■Features (M1567AR-562W-50HZ/M1567AR-562W-60HZ) ● Compared to air conditioners and spot coolers, it consumes less power, significantly saving on electricity costs. ● It provides a cooling effect of -6°C compared to the outside temperature (at 30°C and 50% humidity). ● The cool air is generated by the natural evaporation of water, making it gentle on the body even with prolonged use. ● It does not emit heat like an air conditioner, making it clean. ● It comes with a remote control, allowing operation from a distance. ● Equipped with a sterilizing UV lamp that disinfects the water during cooling, reducing odors. ● The airflow can be adjusted in three levels.

●Cooling Effect -6.5℃ By lowering the temperature near the hottest ground, the cool beam indirectly achieves a decrease in air temperature and perceived temperature. ●2WAY Stand The stand can be used not only as a mist stand but also as a parasol stand. *Parasol sold separately. ●All-in-One Model This all-in-one model comes standard with a 10m hose. With this single set, it can be used immediately.

The cool breeze that signifies the arrival of early autumn. Anyone can easily create a gentle coolness amidst the heat. This fine mist cooling system, which uses a fan that emits about one-tenth the CO2 and electricity costs compared to air conditioning, is both environmentally friendly and economical.

■It is used in such places. *This product is not a main air conditioning unit. It is limited to operation in air-conditioned indoor environments.

It's a hassle to go to the faucet every time I use it. With automatic spraying at the set time, there's no need to turn the tap. You can use MIST as much as you like at your preferred time, even when you're not home. Easy installation on the faucet. Powered by two AA batteries.

■Purpose Measures against summer heat, measures against heatstroke, dust removal, humidification

Adoption of fine pitch guard Utilizes dual-zone blades and dedicated motors for energy saving

● Detachable mounting legs ● High static pressure fan suitable for duct ventilation It can be used in a wide range even under high pressure, allowing for effective installation.

■Features of M1357F-45JRK3S/M1357F-45HNK3S ● It has a 2-speed adjustment (high/low). (Only M1357F-45JRK3S) ● It can be mounted on walls or ceilings. (Ceiling mounting uses a system base) ● The use of a totally enclosed motor ensures excellent durability and safety. ※ Oscillation angle: 90° ■Features of M1357F-50JQK3S/M1357F-50HQK3S ● It features a fine mesh guard, providing excellent safety. ● It can be mounted on walls or ceilings. (Ceiling mounting uses a system base) ● The use of a totally enclosed motor ensures excellent durability and safety. ※ Oscillation angle: 90°

A cooling device weighing only 135g. Recommended for outdoor work and preventing heatstroke. By using a Peltier element and placing a cold aluminum plate on the nape of the neck, it cools the circulating blood and quickly lowers the perceived temperature. Unlike ice or cooling materials, it does not become lukewarm, allowing for prolonged use.

This system can reproduce particle sizes and rainfall amounts (intensity) similar to natural rain (from drizzle to heavy rain) at lower water pressures using a self-developed tube nozzle. The range of rainfall can be set from a few centimeters to infinitely. It has been recognized and chosen by various research institutions around the world that have searched for nozzles.

● The compact type with a handle (φ100mm fan) is easy to carry. ● The spray volume is approximately 40cc/min per nozzle. You can operate it by filling a simple plastic bottle with water. * When using the optional dedicated tank (capacity 10L), it can spray continuously for about 4 hours.

■With Pockin plug ■3-stage switch

■With Pockin plug ■3-stage switch

■With Pockin plug ■3-stage switch

● Limited infrared irradiation area ● High radiation efficiency ● Reduced running costs and CO2 emissions ● Quick startup ● Soft light emission color ● Applicable locations ● Adjustable tilt

● Limited infrared irradiation area By limiting the infrared irradiation to the heating area, maximum heating effect can be achieved in that area. ● High radiation efficiency Most of the infrared radiation emitted from the heat source heater is directed towards the heating area. ● Reduction of running costs and CO2 emissions Due to limited irradiation and high radiation efficiency, the total input of the heating device is reduced, and partial heating operation has also improved. As a result, significant reductions in running costs and CO2 emissions are possible. ● Fast startup Energy can rise and fall almost simultaneously with the switch ON/OFF (3-5 seconds). ● Soft light emission color There is no glare like that of halogen lamps, and it emits a charcoal color. ● Applicable locations It is suitable for spot heating in large spaces. ● Control method Output can be easily varied using an adjustable volume.

● Limited infrared irradiation area By limiting the infrared irradiation to the heating area, maximum heating effect can be achieved in that area. ● High radiation efficiency Most of the infrared radiation emitted from the heat source heater is directed towards the heating area. ● Reduced running costs and CO2 emissions Due to the limited irradiation and high radiation efficiency, the total input of the heating device is reduced, and partial heating operation has also improved. As a result, it has become possible to reduce running costs and CO2 emissions. ● Quick startup Energy can be ramped up and down almost simultaneously with the switch ON/OFF (3-5 seconds). ● Soft light color There is no glare like that of halogen lamps, and it emits a charcoal color. ● Applicable locations It is suitable for zone heating and spot heating in large spaces. ● Swiveling capability The heater can swivel freely up and down by 60° in the direction of irradiation.

●Overwhelming airflow A large fan with a diameter of 43cm that delivers airflow you wouldn't expect from a cordless model. ●Long continuous usage time A battery that allows for over 2 hours of continuous use at high speed settings. ●Cordless & lightweight Lightweight and equipped with a handle, making it easy to carry and usable anytime, anywhere. ●Ideal for air circulation With an adjustable angle of 220°, it is perfect for air circulation.

■One-touch controller Select days 18, 21, 24 and set the start and end temperatures. Automatically starts temperature decrease control and can set the end temperature within a range of 42 to 25°C.

■Significantly reduce heating costs from the continuously rising kerosene prices. Waste oil becomes a valuable resource. The rising costs of kerosene and heating are a concern for many companies and industries. Manufacturers' waste oil stoves utilize waste oil that would normally be discarded, reducing heating costs and providing reliable profits to businesses. Additionally, waste oil is currently traded as a valuable commodity and is gaining attention as a sellable fuel and a resource-saving option. ■Remarkable heating effect through the manufacturer’s unique constant oil surface vaporization combustion method. Waste oil is heated and vaporized at the bottom of the combustion chamber, allowing for complete gasification combustion in the heat radiation area. This enables consistently stable and efficient combustion, which is why it is said to have "stronger firepower" compared to regular stoves. ■Easy adjustment of firepower with the unique airflow adjustment lever. Excellent operability. Adjusting the firepower is simple and can be done by just opening and closing the airflow adjustment lever. This increases or decreases the amount of air for combustion, adjusting the firepower (manufacturer's unique method). There is no need to operate the fuel valve at all (operating the fuel valve can cause issues such as valve clogging). Additionally, ash cleaning can be completed in just a few minutes before ignition, making it highly maintainable.

● Four air outlets ● Airflow can be adjusted in three levels ● Air outlet angle can be adjusted to 210° ● Can be used as a blower by turning off the misting function ● Nozzle is detachable ● Comes with an attachment for easy connection to a faucet