シロ産業 List of Products and Services

● It is ideal for work sites without crane equipment. ● It is lightweight yet strong. ● Assembly and disassembly are easy, and it is easy to carry and move. ● It comes with movable casters (with four swivel brakes) and a geared trolley. * Please do not move while the load is suspended. * Hoist is sold separately.

It is ideal for work sites without crane equipment. This crane can be assembled, disassembled, and transported by a small number of people, making it possible to effectively utilize this single unit without the need for crane facilities. It comes with movable casters (with four swivel brakes) and a geared trolley. *Please do not move while the load is lifted.

The vibration control function suppresses load fluctuations. Widening the range of the light load high-speed function. The synchronous control function (special feature) automatically controls using a communication board, providing peace of mind and safety.

● Can be used as an eye plate without drilling holes in the beam or attaching pieces ● Easily attaches to H-shaped steel ● Equipped with rollers for moving suspended loads ● Basic load capacity: 1 ton

Two-tier cart with steps A cart that is convenient not only for transporting goods but also for small-scale tasks. Equipped with a step that has a stopper function on the upper and lower cargo platforms, it allows for safe and smooth high-altitude picking.

● During transport, it is securely attached with a permanent magnet, so it is completely unaffected by power outages, disconnections, or short circuits, ensuring safety. ● There is no need to pull in cables from an AC power source, allowing it to be used in a wide range of work sites. ● Fully charged in 2 hours. Capable of 1000 ON-OFF cycles. ● When suspended, the sensor prevents the OFF function from activating, providing peace of mind. ● It is very compact, making it highly effective even in narrow spaces.

Cordless vacuum suction pad compatible with both flat and uneven surfaces ● All-in-one system with no cords required ● Compatible with both smooth and uneven surfaces ● Improved seal for enhanced suction power compared to previous models ● Quick attachment and detachment with a single button ● Internal battery can be recharged approximately 300 times

■Work Operation You can easily operate the workpiece directly. High-precision positioning in assembly tasks can be achieved. ■Grip Operation By operating the grip-shaped lever located at the top of the grip, you can raise and lower the workpiece. This allows for quick handling of tasks such as transportation.

- Uses a permanent electromagnet, unaffected by power supply after excitation. - Does not require power during transport, so the workpiece being held will not fall even if the power is cut off. - Automatic mode allows for the adsorption/detachment of workpieces, capable of handling one 6mm thick steel plate.

■High efficiency & safety features with a lightweight and slim design High-speed chain block MAX. 120-250kg

Please use for vertical movement of loads with constant speed, two-speed, or high-frequency operations.

Gear trolley coupling electric chain block. Please use it when horizontal movement is short or when fine adjustments are needed.

Easy with both hands! We also produce optimal specialized lifting equipment tailored for small loads. Handle loads with a sense of balance like in zero gravity using both hands.

Simple door-type crane 2.8 ton

This single unit can transport various cardboard boxes. An all-in-one package specialized for clamping and transporting cardboard boxes. Explosion-proof compatible. It grips by its own weight and can be adjusted to fit the width of the box. Power source: Compressed air: 0.6Map (×50L/min) *No electrical power is required.

Vertical, horizontal, diagonal... This is a manual endless winch that can pull in any direction without a limit on the length of the wire rope. The wire rope can be easily set with just one lever operation.

● Can be used for both open and closed type drums ● The drum is held by its outer shape and lifted vertically, ensuring stability and safety during work ● Easy installation and removal with a handle mechanism ● Equipped with a locking device

Explosion-proof push monorail trolley

Explosion-proof geared chain trolley

Explosion-proof hand chain block

Explosion-proof lever hoist

Recommended for lifting off-center loads. You can lift the load in a balanced manner with simple crane operations.

Standard Hanging Scale Simple Design Hanging Angle Within 60 Degrees

Standard Hanging Scale Simple Design Hanging Angle Within 60 Degrees

Scale hoisting device for bulk bags

Balance fishing gear for plastic containers

● A powerful electric winch (12V) that uses power from a power source rather than a battery ● You can choose the boom position from three locations depending on the size of the load. ● Equipped with a tipping prevention swivel stopper ● Easy operation with a boom lift support spring

● Compact and lightweight design with an integrated aluminum body structure for easy portability ● Low manual effort required, allowing for smooth operation ● Equipped with a strong grade 100 load chain ● 360-degree compatibility allows for lifting and positioning from any angle ● Supports horizontal and diagonal pulling, making it convenient for work in tight spaces and at heights ● Comes with a Japanese instruction manual

It is used for a wide range of applications. With a lightweight and compact design, it supports the efficiency of operations in various sites handling flat steel and round steel. It also offers excellent cost performance. This state-of-the-art lifting magnet features a half-shell structure with high magnetism and can be easily operated with a short and lightweight lever switch. Additionally, the manufacturer's unique braking system suppresses rebound during release to prevent injuries.

The diverse settings accommodate almost any need. The overall height and focus can be adjusted with a plug pin. Similarly, this device can be used up to 20% of the rated load without engaging under the pad. The support pins are arranged, for example, to allow for striking standing blanks in many cases. Flat disks and sheets can also be placed in the same way. For horizontal transport, the back of the system is equipped with lifting eyes. The steel structure is fully coated, and the stable lifting magnet ensures maximum safety.

Single-speed chain block with a lifting capacity of 60kg and a lift height of 3m, single-phase 100V.

● Deep and shallow angle prisms ensure safe positioning of loads and guide the magnetic field deep into the material. ● The magnet system can be switched effectively across the entire diameter bandwidth, with no recoil, and shear of the load due to twisting is prevented by the overlap of the prisms. ● Flat materials pose no problem for the FX-R, even if the material thickness is thin. ● In high-temperature work, deep prisms protect the magnet core from overheating. ● Applications: For round steel materials such as pipes ● Lineup: 100kg to 1800kg ● Maximum operating temperature: up to 80℃

●This is a flat sheet magnet for professional lifting and moving of sheets, tubes, and bars. ●The combination of a special magnet configuration and the FX-P rectangular pole shoe allows for maximum magnetic flux density even with thin materials.

All stainless steel chain block. It is ideal for sites such as power plants, clean rooms, medical facilities, food, chemicals, and water supply and drainage where explosion-proof, dust-proof, and rust-proof features are required.

● Compared to conventional iron wheels, vibrations during operation are significantly reduced, and noise levels are lowered. ● Due to the polyurethane rubber tires, there is almost no wheel slip, and swaying is minimized. ● The building's runway can be used directly as a travel path, eliminating the need for rail construction.

● When lifting, the automatic locking mechanism engages, ensuring safety as it does not detach from the workpiece. ● The removal lever operation completely releases the lock, allowing for easy detachment from the workpiece using a crane or similar equipment. ● The large opening makes it easy to attach and detach the workpiece.