シロ産業 Product Lineup

It is a high-precision temperature and humidity meter that can be easily operated with one hand.

●Display and Control Device of This Unit This is a multifunctional measuring instrument for detecting and displaying parameters such as air humidity, temperature, absolute pressure, airflow, volumetric flow rate, CO2, and water activity. *Note: Sensors for absolute pressure, airflow, volumetric flow rate, CO2, and water activity are optional.* The standard set consists of a humidity-temperature probe and can be expanded with optional components. The display and control device includes a large color touch screen, an intuitive menu structure, and a built-in data logger capable of storing 2,000,000 data points. This device can be connected to a PC via a USB interface, allowing data to be downloaded and displayed. Additionally, it can be exported using the included software. This instrument can be powered by four standard AALR6 alkaline batteries or a USB power supply.

● Simultaneous display of temperature, humidity, and time (M2D-6751BA) ● Simultaneous display of temperature, humidity, time, WBGT or dew point (M2D-6796A)

Cable length: approximately 1m *Using the product for purposes other than its intended use or handling it roughly may lead to sensor damage or cause injury. Please select a sensor that suits your intended purpose.

● With a character height of 100mm and a recognition distance of 30m, visibility is outstanding! ● The possibilities for the installation location of the display unit have greatly expanded. ● This device adopts a 100mm character height substrate unit and has a housing case thickness of 20mm, making it a slim temperature display unit. ● Due to its slim and lightweight design, it can be easily installed in places like hospitals, schools, offices, factories, banks, and museums, where safety considerations were previously necessary during conventional installations.

Easy temperature measurement inside the refrigerator A thermometer that serves two purposes

●Can be thrown in with a 3m cable (made of silicone) ●The sensor part at the tip is weighted. It is suitable for measurements in storage tanks and fish farming sites, and since it is made of hygienic AISI 316 stainless steel, it is suitable for HACCP management and can be used for food and beverages.

Gas temperature probe for measuring ambient temperature, wind temperature, etc. It can also record on a smartphone/tablet, allowing you to track temperature trends.

Multifunctional Waterproof type Certificate issuance available

Plating temperature measuring thermometer

Thanks to its waterproof design, it can be used in wet areas or with wet hands. It is ideal as a center thermometer for food temperature management.

Separate thermocouple probes are available in various options depending on the temperature range and intended use.

Digital thermometer as a substitute for alcohol thermometer.

Multi-functional thermometer with dual channel simultaneous display

It is a robust industrial thermometer with a liquid-filled design that measures the temperature of distant locations.

●Temperature and humidity display device using LED with a character height of 57mm ●Alarm output function (optional) that can connect a buzzer, rotating light, etc.

It is a waterproof handheld food thermometer.

High-spec thermometer with a resolution of 0.01℃, featuring a platinum resistance temperature detector Pt100 (Class A: 4-wire type) sensor.

This is an outdoor waterproof case designed to protect measuring instruments from rain, wind, and dust. *The front panel of the case meets the IP65 standard; however, there is a temperature sensor outlet at the bottom of the case, which creates a gap, so that part is not waterproof.

Foldable waterproof center thermometer using K-type thermocouple. Probe extended length 260mm.

This is a thermometer that displays the average daily temperature in an accumulated format. It simultaneously shows accumulated temperature, accumulated days, current temperature, and the previous day's average temperature, which can be used as a guideline for determining rice harvesting, harvesting criteria for greenhouse cultivation, and predicting flowering from pruning flowers. Accumulated temperature is an effective means for estimating the harvest period.

Wireless reception (Bluetooth) for analysis and management, Android-exclusive thermometer.

● The head is made of a magnet, allowing it to attach to metal surfaces for hands-free temperature measurement. ● It adheres closely to metal surfaces (ferromagnetic materials), making it less likely to experience variations during temperature measurement, enabling stable temperature readings.

A super high-precision temperature and humidity meter with a data logger function. It also features an alarm function that supports dew point temperature and wet bulb temperature measurements.

●Measurement items: Temperature, Humidity ●Temperature range: -40℃ to +80℃ ●Humidity range: 0% to 99% ●Waterproof function: IP67 ●Reader: PaSoRi ●Can be mounted on aircraft For non-waterproof type temperature and humidity data loggers, click here → M237T-215LF / M237T-215XLF

● Data collection is performed using a dedicated data collection device, directly transferring data to a computer via USB connection using the communication port TR-50U2 (sold separately). Data from up to 16 units can be collected on-site using the data collector TR-57DCi (sold separately). ● 15 recording intervals and large recording capacity. Each unit can measure and record 1600 data points. The recording interval can be selected from 15 options ranging from 1 second to 60 minutes. For example, with a recording interval of 60 minutes, continuous recording can last for 666 days (approximately 2 years). ● Temperature adjustment function. The temperature data logger displays and records corrected temperatures by inputting correction values in advance.

●Simply plug it into a PC to display temperature graphs in PDF format and detailed data reports (no dedicated software required). ●In addition to the PDF report, using dedicated software allows for data analysis, storage, and export to EXCEL (the software can be downloaded from the manufacturer's website). ●When unexpected changes occur during transport, you can press the MARK button to record a stamp (up to 9 times). ●It can be restarted immediately on-site without any reconfiguration. ●Five alarm temperature range settings are possible.

● Usable in a temperature range of -80℃ to 70℃ ● Simply plug it into a PC to display temperature graphs in PDF format and detailed data reports (no dedicated software required) ● In addition to the PDF report, using dedicated software allows for data analysis, storage, and output to EXCEL (software can be downloaded from the manufacturer's homepage) ● When unexpected changes occur during transport, you can press the MARK button to record a stamp (up to 9 times) ● Can be restarted immediately on-site without resetting ● Five alarm temperature range settings are possible ● A NIST traceability calibration certificate is provided at the factory for three temperature points

●High-resolution and high-precision measurement Digital standard thermometer replacing conventional mercury glass standard thermometers It offers high-resolution display of 0.01℃ across the entire measurement range of -100 to 360℃, with an overall accuracy of ±0.16℃ for high-precision measurements. It is ideal for high-precision temperature measurement and for managing the accuracy of each thermometer in use.

● Compact and high-precision Pt1000 sensor ● Integrated probe ● Manufactured in Germany

● Maximum/Minimum value ● Offset and slope adjustment ● Alarm function (MC8MH3750S only) ● Logger function (MC8MH3750S only) ● 50-point characteristic adjustment function (MC8MH3750S only) ● Manufactured in Germany

■Features ●Temperature and humidity ●Calculated dew point display ●External temperature probe support (optional) ●Manufactured in Germany

■Features ●Temperature, humidity, atmospheric pressure ●Calculated dew point display ●PC software output (optional) ●Manufactured in Germany

It is equipped with an alarm function that also supports dew point temperature and wet bulb temperature measurement.

It only requires button operation, so anyone can easily use it right away. Additionally, it has a zero-point adjustment function, allowing for temperature calibration at 0°C using distilled water and ice. ● Wide measurement temperature range: -40 to 250°C ● High accuracy: ±0.5°C ● The tip is 1.7mm in diameter, so it does not create large holes in food. ● The zero-point adjustment function makes daily checks easy. ● Durable stainless steel probe ● RoHS compliant, CE compliant, EN13485 compliant

● Data memory for 60,000 points ● Records maximum, minimum, and average values (resettable) ● Upper and lower limit alarms (LED and sound) ● Long-life battery (4 years) ● Calibration certificate included (DAkkS)

Proper management of the greenhouse using multiple sensors.

●Temperature Semiconductor sensor / External temperature K-type thermocouple sensor Humidity Capacitive method ●Measurement range Temperature Semiconductor sensor 0℃ to 50℃ K-type thermocouple sensor -100℃ to +1300℃ Humidity 10 to 95% RH Dew point -25.3℃ to +48.9℃

● Detectable wires are VVF 3x2.0mm. By attaching the attachment, VVF 2x2.0mm and VVF 2x1.6mm can also be detected. ● It has become possible to detect current even on the surface of VVF cables, which was not possible with clamp-type detection. ● Current detection for two wires It has become possible to detect alternating current (single-phase) flowing through two wires, which was not possible with clamp-type methods. When the direction of the current is reversed, the direction of the magnetic flux also reverses, resulting in two magnetic fluxes canceling each other out. In clamp-type methods, accurate measurement cannot be achieved because it detects the sum of the magnetic fluxes.

■Product Features ●Japanese menu support ●Frequency range: 100MHz, 70MHz, 50MHz ●4 analog channels, 16 digital channels (M2685MS series) ●Maximum sample rate: 1GSa/s ●Low noise floor, vertical axis range: 1mV/div to 10V/div ●Horizontal axis: 12 div ●Displays automatic measurement results as graphs or tables in history ●Serial bus trigger & decode (optional, RS232, I2C, SPI) ●Built-in 2-channel 25MHz signal generator (M2685MS series, M265DS-**Z-S series) ●Interfaces: USB host & device (PictBridge support), LAN (LXI), AUX (trigger output, pass/fail signal output) ●7-inch WVGA (800×480) display

The MI1M-60E is very easy to operate and can be used by anyone. The measurements are easy to see on the large backlit screen.

● It is compact, lightweight, and convenient to carry (comes with a handy strap) and is also high-performance. ● It has a drip-proof structure that ensures performance is not affected even in areas where water droplets may fall on it, such as on a ship or in a workplace. ● The installation and removal of the sensor can be done easily. ● The LCD display is easy to see in bright conditions.

■Features ● Sends temperature and location information to the server via smartphone. Can be checked anytime on PC (DX mode only) ● An alert email is sent to the administrator immediately if the set temperature is exceeded (DX mode only) ● Data can be easily graphed using dedicated PC software ● Operates for about 3 months on 2 alkaline batteries ● Button lock function prevents accidental operation

Thermal imaging can be done with a smartphone. We offer three types designed for smartphones. *Smartphone is not included.

● The memory capacity supports long-term measurements with 10,100 (temperature and humidity) memory. ● The measurement data stored in the main unit can be displayed in time/graph format using Windows-compatible analysis software. ● Measurement data can also be easily saved in Excel format for viewing. ● It comes with a manufacturer's calibration certificate.