シロ産業 List of Products and Services

■Purpose Measures against summer heat, measures against heatstroke, dust removal, humidification

●Single-phase 200V ●Ceiling-mounted ●Directly connected to water supply ●Thermal protector ●IP55 waterproof meter

● Can dehumidify approximately 40 liters per day ● Equipped with a convenient handle and casters for easy mobility ● Features a display screen showing humidity and operating time ● Comes with a hose for automatic drainage of collected water ● Space-saving design allows stacking of up to three units

Dehumidification R410A refrigerant

Easy waterproof ceiling fan (ceiling fan) 183cm fresh white 3 blades

Simple waterproof ceiling fan (ceiling fan) 107cm white Simple waterproof ceiling fan (ceiling fan) 132cm white

Effectively heating and cooling large spaces such as factories, warehouses, gymnasiums, and recreational facilities is very challenging, and providing a comfortable working environment and space is a significant issue. Furthermore, the cost of heating and cooling is enormous and one of the largest expenses. The world's largest ceiling fan manufacturer has completed and started selling a groundbreaking ceiling fan for large spaces based on over 100 years of experience and achievements. It has achieved the industry's lightest weight and a maximum output of 1 horsepower, enabling energy savings and the creation of comfortable spaces in large areas.

Ceiling fan

●約3時間のフル充電で 最大40時間駆動（弱運転時） ●丈夫なスチールボディ、アルミの羽根を採用しているため、現場等での使用にも最適です。 ●防水性能IPX4 あらゆる方向からの水の飛沫を保護 ●心地よい弱からパワフルな強風まで、風量調整が無段階 ●AC、DC電源のどちらも使用できる2WAYタイプです。

Wind speed of 1m, 30W power for 16m, 52dB Both stationary and hanging type

Creating a comfortable environment with a rich lineup and powerful airflow Motor specifications: Single-phase 100V 50/60Hz, Three-phase 200V 50/60Hz Blade diameter: 30cm ■Features ●Durability and Safety Design - The use of a totally enclosed motor ensures excellent durability and safety. - Equipped with a fine mesh guard for enhanced safety. (50cm) ●Wall and Ceiling Mountable - Can be mounted on walls. (M1357E-30JE2S・M1357E-30HE2S) *Excludes M1357E-K30HA2S. ●Others - Ideal for exhaust and transport applications, cooling, and drying. - All models use metal blades (aluminum).

● Can be installed in places that were previously given up on ● Can send wind at a speed of 1m/s up to 16m away with 30W of power ● Low noise design with a maximum of 52dB ● Available in three-phase 200V, single-phase 100V, and single-phase 200V specifications ● Wiring work can be done easily ● Equipped with fall prevention measures

■Features ● The emergency stop switch on the front of the product allows for quick operation stoppage in emergencies. It prevents secondary disasters by not automatically resuming operation upon recovery. ● The large fan with a diameter of 1 meter enables effective local ventilation in factories through continuous airflow over a wider area than conventional fans. ● The product is equipped with a new variable off-time feature. Setting it at the start of operation prevents forgetting to turn it off, cutting unnecessary power consumption. ● It can continuously blow air with a large fan using only 300W of power, which is smaller than typical factory fans, allowing for energy savings and eliminating airflow inconsistencies over time, unlike oscillating fans. ● Designed specifically for 50Hz, it delivers the same performance anywhere in Japan. ● Usable in harsh environments such as oil mist and dust, it features an energy-efficient motor and a low-noise stainless steel blade with a diameter of 1 meter, considering efficiency and sound. ● In addition to the three-phase 200V specification, a single-phase 100V specification is also available to accommodate various usage environments. ● Achieves a noise level of 59dB.

● Detachable mounting legs ● High static pressure fan suitable for duct ventilation It can be used in a wide range even under high pressure, allowing for effective installation.

Motor specifications: 3-phase 200V 50/60Hz Blade diameter: 50, 60 cm Total of 5 models

For heatstroke prevention during work in the scorching sun. It is a misting evaporative cooling fan for forklifts.

MC16F-600A3S Wind reach distance of 65m! ● Wind direction adjustable by 90 degrees in the pitch angle ● Equipped with an air guide to adjust the wind diffusion range ● Convenient 4-wheel casters for easy movement (with brakes) MC16F-700A3S Maximum wind speed of 20m/s! ● Wind reach distance of 70m! when using 3-phase 200V 60Hz ● Ideal for ventilation in large factories and warehouses ● Wind direction adjustable by 90 degrees in the pitch angle ● Convenient 4-wheel casters for easy movement (with brakes) *Note 1: When using 3-phase 200V 60Hz *Note 2: Measured at a distance of 1m from the outlet

● Fine mist generation can be achieved without a fine mist nozzle. Clogging issues that were problematic with nozzle systems do not occur fundamentally. ● Energy-saving as it does not use high-pressure pumps or powered sprayers. ● Particle size can be freely adjusted.

● An energy-saving cooling device that sprays mist with an average particle diameter of 10 to 30 μm and disperses cool air over a wide area using a blower fan. ● Cools the surrounding temperature by 3 to 5°C due to the heat of vaporization when the mist evaporates. ● A type with a pump and water tank that can be installed anywhere (mobile cart type). ● Suitable for applications such as heatstroke prevention and dust control. ● Spray flow rate of 56.6 L/hr (at 6 MPa), ideal for use in large spaces.

●Angle-adjustable type Both for floor placement and ceiling suspension, angle adjustment is possible up and down! Air can be blown towards the target without using tools. ●Can be installed as a ceiling suspension type using beams in the factory Can be used for air blowing and circulation in a space-saving manner.

● Two-stage combustion with strong and weak settings of 1.8L/h and 1.4L/h. If operated in weak combustion for 8 hours, you can save 3.2L (320 yen) per day. *Compared to conventional models (conventional models only have 1.8L/h), assuming 1L costs 100 yen. ● Neat storage with three-tier stacking capability. Compact and stackable. The handle is foldable, allowing for tidy storage.

Single-phase 100V with thermal protector

●Single-phase 100V (ME1V-3510SUS-100V) / Three-phase 200V (ME1V-3530SUS-200V) ●With thermal protector (excluding ME1V-3530SUS-200V) ●Totally enclosed ●Stainless steel specification ●Blade diameter 350mm ●Air volume: Strong/Weak 2-stage switch (ME1V-3530SUS-200V does not have a switch; it operates only in strong mode)

■Features by Type ○M308F-18DSALH ●Equipped with automatic oscillation function! ●Maximum wind speed of 190m/min (high mode) ●Two-speed switch for wind speed ("high/low mode") ●Convenient timer included (1 hour, 2 hours, 4 hours) ●Angle adjustment (up to 45°) possible ○M308F-18DSLH ●Maximum wind speed of 160m/min (high mode) ●Two-speed switch for wind speed ("high/low mode") ●Convenient timer included (1 hour, 2 hours, 4 hours) ●Angle adjustment (up to 45°) possible ○M308F-18DSDLH ●Flexible placement options: "hanging" or "wall-mounted"! (Patent pending) ●Maximum wind speed of 190m/min (high mode) ●Angle adjustment (up to 60° up and 30° down) possible ●Can be hung on a single pipe (φ48.6mm) (please secure with a strap or string through the strap hole)

● Achieves power consumption of 117/158W. (50/60Hz) ● Adoption of a two-pole motor and air guide enables powerful airflow. ● Capable of blowing air directly up and down. ● Concentrated cooling with strong airflow. ● Uses urethane grease for the motor bearings, achieving high durability of the bearings. ● Usable at ambient temperatures up to 60°C. ● Can be installed in low locations. ● Easy-to-clean grille guard design. ● Power switch included on the main unit.

Tabletop fan with a magnet

A fan that is useful for insect repellent at entrances and for drying laundry.

■Features ●Butterfly Louver Pressing the outside opens it …Air diffuses and the ionization range expands. Pressing near the center closes it …Air moves straight and ionizes quickly. ●Daisy Chain Capability Up to two units can be connected using input/output terminals. (A switching power supply with a capacity of 1.5A or more is required) ●Operational Status is Clear at a Glance New alarm function using a two-color LED. When powered on, the lamp lights green. This confirms that the ion generation and fan are operating normally. Red light indicates various abnormalities. Alarm output is also possible. ●Less Concern About Reverse Charging Ion balance within ±10V. Adopts a high-frequency AC method that maintains ion balance even with long-term use. ●Low Voltage DC24V Input voltage is low voltage DC24V. Consideration for safety when integrating into equipment. ●RoHS/CE Standards Complies with environmental measures of RoHS and safety standards of CE marking. ●External Ground Terminal Included A separate ground terminal is provided. Convenient when grounding is difficult through an adapter.

■Features ● Butterfly Louver Pressing the outside opens it …Air diffuses, expanding the deionization range. Pressing near the center closes it …Air moves straight, allowing for quicker deionization. ● Daisy Chain Capability Up to two units can be connected using input/output terminals. (A switching power supply with a capacity of 1.5A or more is required) ● Clear Operational Status New alarm function using a two-color LED. When powered on, the lamp lights up green. This confirms that the ion generation and fan are operating normally. Red light indicates various abnormalities. Alarm output is also possible. ● Reduced Risk of Reverse Charging Ion balance within ±10V. Adopts a high-frequency AC method that minimizes ion balance disruption even during long-term use. ● Low Voltage DC 24V Input voltage is low at DC 24V. Consideration for safety when integrating into equipment. ● RoHS/CE Standards Complies with environmental measures of RoHS and safety standards of CE marking. ● External Ground Terminal Included A separate ground terminal is provided. This is convenient when grounding is difficult through an adapter.

Cooling effect of -4°C compared to the surroundings at the air outlet. It becomes even cooler with ice added. It does not use refrigerants like air conditioners and does not emit waste heat. This device is environmentally friendly as it utilizes the natural cooling effect of water's evaporation heat. Additionally, it sends a cool breeze, so you won't get tired even after being exposed for long periods.

Small vaporizing blower (cooling and humidifying) Deodorization and sterilization with ozone (O3)

Heatstroke prevention with a cool breeze 5°C lower than the surrounding temperature. Astonishing cool breeze reach distance of 30m (MC35SF-834K). Cool breeze reach distance of 20m, expanding 7m to the left and right at 9m ahead. (MC35SF-822K) ■ Does not fall under the Fluorocarbon Emission Control Law. ■ Features ● Cool breeze reaches up to 30m ● Airflow is infinitely variable. Automatic swing left/right and up/down ● Comes standard with deodorizing pack ● Tank is removable. ● Water supply method ● Equipped with an off timer Automatically stops after 1 to 8 hours, in 1-hour increments. ● Operating ambient temperature: 5°C to 45°C ● Uses an inverter. Be sure to ground it. (MC35SF-822K) ■ Cool air distribution chart (MC35SF-834K) Cool breeze reaches up to 30m At 30m, a cool breeze of approximately 1.2m/second is delivered. ■ Cool air distribution chart (MC35SF-822K) Cool breeze reaches up to 20m At 20m, a cool breeze of approximately 1.5m/second is delivered. ■ Airflow is infinitely variable. Automatic swing left/right and up/down (MC35SF-834K) You can select the airflow infinitely using the knob according to your preference.

■Does not fall under the Fluorocarbon Emission Control Act. Overload protection Water shortage detection Motor overheating protection ■Features ●Cool breeze reaches up to 4 meters. ●Airflow has 3 levels: strong, medium, and weak. ●Deodorizing pack included as standard. ●Tank is detachable. ●Equipped with an off timer The off timer automatically stops after 1, 4, or 8 hours as standard. ●Operating ambient temperature: 5℃ to 45℃

■Features ●Damper type ●Negative ion generation ●Super high air volume ●Energy-saving ●Inverter variable speed

●風量調整3段階 ●オートスイング ●ガードネット ●排熱なし ●たっぷり1日分のタンク式・自動給水式が選べる ●100Vコンセント ●キャスター付

● No heat emission, 220W energy-saving and eco-friendly type ● Gentle and refreshing breeze for the body ● Effective for heatstroke prevention ● Provides a cooling effect of 3°C to 9°C

This product achieves heat stroke prevention and work efficiency even in environments where conventional cooling systems cannot solve the problem or have poor cooling efficiency. It cools only the driver reliably without the need for cabin installation.

Measures against heat stroke and improvement of work efficiency achieved ● Cooling effect lasts for a long time ● Temperature adjustment possible from 7℃ to 20℃ ● Effectively cools even in high-temperature environments above 40℃.

It fits small chairs such as forklifts, construction machinery, and wheelchairs. Cold water circulates in the seat! Frozen plastic bottles are used as refrigerants to cool the seat and backrest intensively. It offers excellent cost performance and contributes to the recycling of plastic bottles. How about a cool cockpit to improve the working environment for operators?

The attached bottle circulates ice water within the parka to prevent heatstroke caused by rising outdoor temperatures. Since it is a parka type, there is a cooling line for the head, which helps lower the temperature inside the helmet even in environments where helmets are worn. The total weight of the included bag is also minimized to 1.7 kg, making it the lightest option. (It features a 3-way design with a waist bag, backpack, and leg belt.) This is a heatstroke prevention wear that adapts to various situations. It uses COOL CORE material, which provides a cooling effect not only through the circulation of cold water but also by being exposed to the wind.

● A high-performance cool vest made in Japan with a total of 16 meters of hose laid out based on JAXA's research. ● A high-performance 6.3L stainless steel cooler box made in Japan, also used for medical purposes such as organ transport. ● A high-performance pump made in Japan with a durability of 6000 hours, featuring a fluorine rubber specification for safety and peace of mind. Please experience the latest next-generation cooling system condensed with Japanese technology.

●It can deliver powerful winds over a wide area, making it ideal for heatstroke prevention. ●It has excellent directionality, allowing for precise placement of airflow. ●Equipped with casters, it allows for smooth changes in wind direction and mobility. ●It is a wide-angle airflow type. ●Power cord length: 10m ●Blade diameter: 626mm ●Number of fan blades: 9 ●Customizable for different voltages from a single unit.

It is a waterproof product that meets the IPX4 standard, ensuring peace of mind even in sudden rain. ■ For one person, with an automatic oscillation device built-in ● Cooling capacity (50/60Hz) ... 2.1/2.5kW ● Power consumption (50/60Hz) ... 0.81/0.99kW ● Electricity cost ... 21.9 yen/h (50Hz) *This is a reference value and may be subject to change.

Blade diameter 20cm to 45cm, exhaust type Exhaust only

● Fine mist generation is possible without a fine mist nozzle. Clogging, which was a problem with nozzle systems, does not occur fundamentally. ● It is energy-saving because it does not use high-pressure pumps or powered sprayers. ● The particle diameter can be freely adjusted. ● Outdoor specification.