シロ産業 Product Lineup

The operability has become significantly easier compared to conventional impact elastic wave devices. ● Measurement depth: 8cm to 1.8m If the thickness exceeds 60cm, the built-in impactor will not provide sufficient output. It is necessary to strike with a hammer. For concrete thickness between 60cm and 90cm, use a 0.5kg hammer; for thicker structures exceeding 90cm, use a 1.5kg hammer.

• Coating thickness gauge

Three types of surface treatment Powder coating Electro-galvanizing (trivalent chromate) Hot-dip galvanizing Load capacity: 1000kg type

• palette

Equipped with exhaust duct that can be easily connected to commercially available ducts (φ150) ■Main usage locations ●Cooling for workspaces, waiting areas, etc. ●Temperature control in factories ●Air conditioning and cooling inside maintenance workshops

• Cooling system

■Product Overview Disposable cardboard box containing diatomaceous material ■Value Added ● Ready to use as an all-in-one solution ● Requires minimal storage space ● Low initial investment needed

• Cushioning material

The Direct Hand series, which pursues operational efficiency, now includes a slide grip type that operates by sliding the grip, in addition to the throttle grip type that operates by twisting the grip. It offers a direct operational feel, as if you are directly handling and moving the suspended load. We propose further work efficiency with the Direct Hand series, which is recommended for assembly work, tool changes, and mold alignment tasks.

• crane

■When returning the car, please lower the stopper and raise it after parking. ■While using the car, it prevents other vehicles from entering when the parking space is open. ●Please set the anchor bolts to match the hole pitch of the stopper base (95mm) and secure them 30mm above the ground with concrete. ●After it has set, please tighten it firmly with washers and nuts. ●Anchor, hook, with lock.

• Other safety equipment

The number of traffic accidents occurring nationwide averages over 2,000 cases. To prevent secondary disasters and protect the environment... Hydrophilic pine needle charcoal liquid adsorbent "Lightweight," "excellent adsorption power," "static electricity countermeasures," "long-term storage possible." It is optimal not only for automobile accident sites but also for recovering thin oil films on water surfaces. We have achieved a low price so that you can be prepared for emergencies. This product was developed in response to strong requests from various fire departments while selling hydrophobic and oleophilic pine needle charcoal. The manufacturer has successfully developed pine needle charcoal with high adsorption performance that is both hydrophilic and oleophilic. Furthermore, considering the risks of secondary disasters, a safe product that does not generate static electricity has been born. ● The material is safe and lightweight pine needle charcoal. The processing of "pine needles" has become a common concern in rice-producing regions, but the "hydrophilic pine needle charcoal," specially processed by our own developed carbonization plant, can adsorb both water and oil, making it an environmentally friendly recycled product. Additionally, with a bulk density of 0.08, it is lightweight and convenient for transportation and storage.

• Paper and pulp products

● It is a composite sling made with wire and chain, lightweight and strong against sharp edges (corners). ● Wire replacement is possible with chain coupling connection. ● Pulling work is easy with thornless wire processed with JIS mesh lock. ● Please refer to the presence or absence of single wire thimbles and the recommended working load when making your request. We will estimate and manufacture a hybrid sling suitable for the load being lifted.

• crane

● You can use it for various purposes such as pulling or hanging heavy objects mounted on walls or floors, depending on your ingenuity. ● Since it is bolted, skilled welding work is not required, and it can be installed simply by drilling holes. ● The latch is also made of forged material, making it strong and durable. ● There are wide and narrow types available, so please choose according to the installation location. The performance is the same.

• crane

●Chain sling for hanging stones ●New grab hook specifically for 5mm chain

• crane

● This is a single hook chain hook equipped with a wide-mouth hook with a wide opening. ● The effective length is short, providing excellent workability. ● The chain is a strong chain with plating.

• crane

● The latch is automatically locked in both open and closed positions. ● The lock release is operated by a push button on the side, providing excellent usability. (It's one-touch, making it easy to operate even with leather gloves. There is also no risk of snagging or pinching fingers.) ● The hook has a wide opening (76mm), making it convenient for hanging thicker items. ● The lever is long and locks in the most open position, allowing the hook to be easily removed from the flat steel plate with a half turn. ● The diameter of the lever handle hole is large (40mm), making it easy to attach thick shackles or wires with thimble processing. ● It has excellent rust resistance due to the parkerizing and plating (baking treatment) finish. ● Safety factor of 6. It is made of special steel, ensuring strong safety.

• crane

It comes with a sturdy latch made of forged material.

• crane

● This is a single, double, and quadruple chain hook with a ring and chain set, featuring a swivel function. ● The chain is a strong chain with plating. ● A dedicated tag indicating the serial number and the working load is attached to the chain hook.

• crane

● The swivel function prevents twisting of chains and wire ropes, reducing the rotation of the suspended object. ● It has a larger opening than eye hooks and clevis sling hooks, making it convenient for hanging thicker items. ● It is made of forged material and comes with a sturdy latch.

• lift

● This is an electric winch with a simple structure that pursues affordability. ● It can be used for various applications depending on your ingenuity. ● It features a maintenance-free design with no need for oil or carbon brush replacement. ● It is a single-phase 100V model, making it suitable for a wide range of uses. ● It operates quietly, so it can be used in various situations. ● It comes standard with wire that has been processed with an eye, so you can use it immediately. (Please purchase additional end fittings separately if needed.)

• crane

● It is a single-phase 100V specification, so it can be used at home. ● By adopting an induction motor, there is no hassle of oil changes or carbon brush replacements. ● The use of a geared motor with a brake has made it possible to offer it at a low price. ● The operating noise is low, so it can be used regardless of the location or situation. ● For motor protection, if it overheats due to harsh continuous use (5-10 minutes), the thermostat will activate and it will stop working. After a while, when the temperature drops, it will automatically reset.

• crane

The ultra-high and low temperature data logger is a temperature data logger with 32,700 memories. It uses a platinum resistance thermometer Pt-100 as the temperature sensor, achieving a high measurement accuracy of ±0.1℃. This temperature data logger can be used in ultra-low temperatures from -200 to +350℃.

• Data Logger

● Improved workability in tight spaces with a band winding method. ● Structural design that makes it difficult to touch the grease area, keeping hands clean. ● Comes with a ring for attaching hooks and other accessories.

• Binding/Packing Machine

The bottle automatically rotates, the label is fed out, and it can be wrapped and attached. It's a tabletop model, making it easy to move. It doesn't require a specific location.

• Sealing machine

●Improvement of work efficiency ●Reduction of air consumption ●Reduction of man-hours ●Safe and efficient two-handed operations ●Line improvement

• Other cleaning tools

● The data transmission distance is approximately 5 meters in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the main body of the caliper.

• Other measurement, recording and measuring instruments

● The depth bar is thin at φ1.5mm, making it ideal for the depth of small diameter holes. ● The data transmission distance is approximately 5m in line of sight. ● It adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

• Other measurement, recording and measuring instruments

● It can be measured with center pitch measurement and direct reading. ● The data transmission distance is approximately 5 meters in line of sight. ● It adopts a response-back method. ● The transmitter is built into the digital display section. ● One receiver is included with the caliper body.

• Other measurement, recording and measuring instruments

● Ideal for measuring large diameter outer diameters. ● Data transmission distance is approximately 5m in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

• Other measurement, recording and measuring instruments

● The data transmission distance is approximately 5 meters in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

• Other measurement, recording and measuring instruments

■Compliant with JIS K 6253 You can also select a durometer hardness testing method (approximate) compliant with JIS K 6253. ■Fully automatic measurement Hardness of O-rings and small rubber parts can be measured fully automatically. ■Improved internal mechanism friction and reproducibility The load system employs a voice coil motor, enhancing the friction and reproducibility of the internal mechanism compared to weight-based systems. ● Plug-in type for easy replacement of the plunger (measuring element). As it is a domestic product, maintenance support is also prompt. ● The sample stage is wide, allowing for various measuring jigs to be grounded. ● Calibration documents can be issued.

• Other measurement, recording and measuring instruments

■Engineering ●Inspection after sewing belts and similar items ■Current Issues ●During the sewing of belts and similar items, there is a possibility that broken needles may go unnoticed and end up in the market, so we want to detect broken needles. ●We want to continuously detect whether broken needles are mixed in on the automated sewing line. ■Benefits of Improvement By adopting sensors, we can pass the sewn items through the sensors, allowing us to detect any broken needles that may have mixed in, thus preventing complaints about market leakage and creating a win-win situation for everyone.

• Other inspection equipment and devices

■Temperature Management of Cargo Holds ●What is the importance of temperature management? - Many products within the cargo hold are at risk of spontaneous heating or ignition, and if not properly managed, they can cause significant damage. - This is particularly a concern in double-hulled cargo ships with high moisture retention. ●What types of items are applicable? - Raw materials such as tobacco, cocoa, cotton, jute, etc. - Items containing oils, such as seeds and nuts. - Oil cakes (compressed oil, extracted oil, pellets) - Aluminum powder, ores, coal products, etc.

• Thermometer

Compatible with thicknesses up to 80mm. *Sales are in sets of 2 units.

• Other conveying machines

- Holds temperature information for all individual pixels (1024 pixels) on the screen. The temperature of the touched area is displayed. - Simple overlay function for thermal images and visible images. It clearly shows where the temperature is rising, and it does not become unclear what is being photographed. - Wide measurement range up to 380℃. Temperature display in 0.1℃ increments. - Emissivity: adjustable in increments of 0.01 within the range of 0.01 to 1.00. - Built-in humidity sensor allows for measurement of not only object temperature but also environmental humidity. Useful for understanding the measurement environment. - Equipped with a touch panel. Smooth operation for checking temperature at desired points and selecting menus. - Features an auto power-off function to reduce battery consumption.

• Radiation thermometer

● Achieves high cold retention/insulation with a three-layer structure of polyethylene, foamed polyurethane, and polyethylene ● Improvement in hygiene due to cold retention and heat retention ● The surface is smooth, making it difficult for dirt to adhere, easy to clean, and hygienic

• container

Professional work done quickly with reliable Japanese quality. A tough clamp meter that doesn't mind the usage environment. Increased jaw strength, wide operating temperature range, dustproof and waterproof, CAT IV 600V, high voltage measurement. Passed numerous durability tests, allowing for safer and more secure use.

• Other electric meters

Excellent soundproofing performance Easy assembly Volume reduction 1/4 Material: Polypropylene, glass wool

• Other packaging materials

This is a lightweight and compact portable small colorimeter and whiteness meter. It can measure all the color systems and color difference formulas necessary for color measurement, as well as items required for evaluating whiteness. Simply place the sample on the sample port and press a button on the operation panel to display the data, making the measurement process extremely easy. It is a groundbreaking measuring instrument that accommodates a variety of samples, including solids, powders, and pastes. It is an ideal measuring device for managing color and whiteness in industries such as painting, food, paper, pharmaceuticals, and cement.

• Other measurement, recording and measuring instruments

The MI1CA-S6EM ozone concentration control transmitter is a control/monitor for managing ozone generators within a range of 0.03 ppm to 50.00 ppm. The MI1CA-S6EM features relay contacts for turning the ozone generator ON/OFF at a specified ozone concentration, as well as an RS232C digital output port for connecting to data loggers, computers, and other devices, along with 4-20mA and 0-2 VDC analog outputs.

• Other measurement, recording and measuring instruments

This is a carbon dioxide gas monitor/controller for controlling the concentration of carbon dioxide gas and monitoring indoor CO2 levels. It displays CO2 concentration and temperature simultaneously. There are two operating modes. Switching between modes is easy. Greenhouse Mode: This operating mode manages the concentration of carbon dioxide gas used to improve crop growth and activates when there is sunlight or artificial light such as LEDs, and the light sensor is operational. The light sensor detects the presence of light, and during the night or in darkness when photosynthesis does not occur, the relay does not operate regardless of CO2 concentration. When the CO2 concentration drops to a specified low level, the relay turns ON, activating the electromagnetic valve attached to the carbon dioxide generator or gas cylinder. Then, when the CO2 concentration reaches a specified high level, the relay turns OFF. Ventilation Mode: When the CO2 concentration reaches a specified high level, the relay turns ON, activating ventilation fans, etc. When the CO2 concentration drops to a specified low level, the relay turns OFF. The light sensor is not used in ventilation mode.

• Other measurement, recording and measuring instruments

The MI1ER-427EM temperature and humidity meter is a high-precision, multifunctional, low-cost digital thermometer and hygrometer that can measure and display temperature, humidity, dew point temperature, and wet bulb temperature all in one device. It is a recommended hygrometer for engineers and professionals.

• Thermo-hygrometer

The MI1M-60E is very easy to operate and can be used by anyone. The measurements are easy to see on the large backlit screen.

• Other measurement, recording and measuring instruments

All stainless steel (SUS304) specification With backrest Seat diameter φ360

• Office furniture

Conductivity: R≦1.0×10^9Ω Material: NBR Standards: EPA RoHS ● For indoor use ● Uniform and stable conductivity performance ● Thick and resistant to warping ● Generous size of 900×600mm ● Gray color that shows dirt ● Comfortable enough to want to jump on ● Washable with water

• mat

● When observing with a high-magnification microscope, indentations can be seen. ● The measurement reaction is fast, displaying results in 2 seconds. ● The large LCD display shows measurement results, counts, maximum values, minimum values, average values, and deviations. ● Easy to operate. ● With a large-capacity data storage function, it can save up to 1000 measurement data. ● Simple calibration operation. Efficiently saves 20 calibrated data for immediate use during the next calibration.

• Other measurement, recording and measuring instruments

● Keys cannot be taken out without authentication via non-contact IC cards or passwords. ● The usage status of keys can be set to "available" or "not available" for each employee. ● It is possible to save the history of who took out and returned the keys, and when. ● Usage history management can be done on a computer using a USB memory stick. (Only for the M764KBF model) ● Centralized management via PC is possible through a LAN network. ● The "work burden" of the key management officer is significantly reduced.

• cabinet

● Achieves significant weight reduction while maintaining durability ● Body height is 120mm ● Standard equipped with a tilt mechanism with a maximum inclination of 4° ● The wear-resistant rubber turntable prevents misalignment with the workpiece.

• Other consumables

● Automatically identifies the measurement target and performs measurements of ferrous/non-ferrous metals. (ME9TM-52FEN) ● With a rotary probe, it is possible to measure the interior of pipes and difficult-to-reach areas. ● Compact and lightweight, it is pocket-sized, allowing for one-handed operation in high or narrow spaces. ● Equipped with an auto-off function. Settings for 1 minute, 5 minutes, and 30 minutes are available.

• Coating thickness gauge