シロ産業 Product Lineup

Power Supply: AC200V 3-phase Heater Capacity: 8.2kW (AC200V) Motor Capacity: 325W (AC200V) Conveyor Speed: 0 to 15m/min Internal Temperature: Max 200℃ Tunnel Inner Dimensions: 900(L) × 800(W) × 350(H) Total Machine Weight: Approximately 320kg

• Shrink Wrapping Machine

Standard arch 390(W)×208(H)mm Packing speed 24 packages/min Power supply Single-phase 100V Band width used 30mm Tightening force 0.5–4.0kg

• Other packaging machines

● There is a range of options to choose from, such as cotton cord, polyethylene, and polypropylene cord, depending on the purpose. ● The time required to hang the cord, tie it, and cut it is just 1.7 seconds. ● The operation is easy for anyone to handle. It smoothly performs the work of 15 people manually. ● Double rotation specification: #28 fine.

• Binding/Packing Machine
• others

Height: 400mm, Table height: 230mm Width: 435mm Depth: 300mm Weight: 19kg Power supply: 100V (rated power consumption 150W) 50/60Hz

• Binding/Packing Machine
• others

● High detection sensitivity Detects a No. 10 silk needle at a height of 11 cm above the detection surface. (Needle dimensions: 33.3L × 0.56φ mm) ● Six levels of sensitivity adjustment via a switch. Sensitivity can be selected according to the type and size of metal accessories such as buttons, zippers, and hooks, allowing adjustment for the influence of accessories. ● The alarm buzzer sound varies depending on the size of the detected "needle," allowing for differentiation between large and small. ● Stable operation with strong resistance to vibration. ● Can be integrated into a workbench.

• X-ray inspection equipment

Standard arch 390(W)×208(H)mm Packing speed 24 packages/min Power supply Single-phase 100V Band width used 30mm Tightening force 0.5–3.0kg Working surface height 30mm×190m (paper tape)

• Other packaging machines

PP band heat welding machines are available for rent. The quantity of PP band heat welding machines available for rent is limited. Please contact us via email first. Before the rental begins, you will need to make a payment of the following amounts in advance: Planned rental fee, Shipping cost, Deposit of 100,000 yen (which will be refunded later). Shipping will occur after we confirm the above payment, but it will take about three days until shipment. Please note that the number of rental machines available is limited, so we cannot guarantee that you will be able to rent one. Thank you for your understanding.

• Other painting machines

●This is a strapping machine for packaging with plastic bands. ●The plastic band is set on the package manually or with a band feeder. The band is attached to the tool, tightened, and sealed and cut through vibration welding.

• Binding/Packing Machine
• others

● The packaging can be completed in just 1.5 seconds. ● Up to 40 packages can be processed in one minute. ● It can be used anytime and anywhere with a standard 100V power supply. ● It is an energy-saving model that automatically stops the motor after 3 minutes of inactivity. ● The band setting can be easily done with the up and down operation of an external lever. ● The tightening force can be easily adjusted from a soft weak tightening to a maximum of 80kg (stroke 150mm). ● It becomes ready for use in about 25 seconds after turning on the power, and a lamp indicates that it is ready for operation.

• Binding/Packing Machine

This machine realizes a strong tightening force with a steel roller, which was previously considered impossible. It features a compact body with a steel roller and control functions utilizing digital technology. The fusion of these technologies allows for adjustable tightening forces ranging from 2 kgf to 50 kgf. By changing internal settings, it can also be adjusted to prevent excessive tightening from the front operation panel. Additionally, by reducing the number of internal switches, the occurrence of malfunctions due to dust and debris has decreased. Compared to resin-based rollers, which tend to wear out during strong tightening, the use of steel rollers extends the replacement cycle.

• Binding/Packing Machine

Spectrophotometers can quantitatively analyze the content of samples over a wide range of the visible spectrum and are used in various routine analyses, food inspections, environmental monitoring, universities, the semiconductor industry, the paper industry, the plating industry for chemical concentration management, as well as in the printing and dyeing industries for dye concentration management and wastewater management.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Equipped with a high-precision compact spectrometer Measuring the spectral reflectance of each wavelength of visible light ● Compact design Portable anywhere, regardless of location Easy measurement with one hand

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Compact, lightweight, easy to operate, and battery-powered cordless gloss meter compliant with JIS, ISO, and ASTM gloss standards. ● No warm-up time required; gloss standard setting and average value setting are easy with one-touch operation. ● Both fixed and multi-angle types display measurement data simultaneously and instantly. ● Automatically accommodates a wide measurement range from 0 to 2000 gloss units. ● Equipped with pass/fail judgment function for each angle or simultaneous judgment for three angles. ● Features for storing, saving, inputting, referencing measurement data, and data correction, etc. ● Visual display indicating battery level at a glance.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Measurement range setting: Manual/Automatic switchable ●Maximum and minimum value display

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Compliant with JIS AA grade and DIN Class B Illuminance meter for next-generation lighting compatible with PWM light ●The mini light receiver and cable are waterproof. ●Multi-point measurements can be easily and inexpensively performed. A mini light receiver is also available, allowing for illuminance measurements in narrow spaces. ●Compliant with JIS AA grade and DIN Class B The T-10A and T-10MA comply with JIS C 1609-1:2006 General Class AA illuminance meter and DIN 5032 Part 7 1985 edition Class B. They are reliable illuminance meters that pursue high precision and high reliability. *This device has obtained type approval under the Measurement Act for the main unit and light receiver as a single unit. Type approval has not been obtained for using the main unit and light receiver separately (cable extension/multi-point measurement). The type approval number applies to combinations where the serial numbers on both the main unit and light receiver are the same.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The UV intensity meter MI1UV-65N is a new type of UV intensity meter that automatically calculates and displays the UV index based on the intensity of UVA and UVB.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The UV intensity meter MI1UV-62N is a compact, lightweight, pocket-sized digital UV measuring device that measures only the medium ultraviolet UVB waves (280-315nm), which are said to have an impact on the skin that is 100 to 1,000 times greater than that of ultraviolet UVA waves.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1UV-60N is a compact, lightweight, pocket-sized digital UV meter that measures only medium ultraviolet UVB waves (280-315nm), which are said to have an impact on the skin that is 100 to 1,000 times greater than ultraviolet UVA waves.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1UV-57N is a compact, lightweight, pocket-sized digital UV meter designed to measure the total intensity of both near ultraviolet UVA waves (315–400nm) and medium ultraviolet UVB waves (280–315nm).

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1UV-50N ultraviolet intensity meter is a compact, lightweight, pocket-sized digital ultraviolet measuring device designed to measure the total intensity of both near ultraviolet UVA waves (315-400nm) and medium ultraviolet UVB waves (280-315nm).

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Color rendering evaluation measurement device compatible with high-quality next-generation lighting such as LED lighting and organic EL lighting. The only spectroradiometer compliant with both JIS and DIN standards (as of December 2011). Equipped with easy and convenient PC software as standard.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Digital light meter

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

■Measurement Items ・Illuminance Measurement ・Temperature Measurement (Thermocouple Type K/J)

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Compact pocket-sized all-in-one design ●Simple operation with a single button ●Large LCD with automatic backlight function

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

It is possible to measure over a wide range with an automatic range switch from 0 to 40,000 Lux. The MI1T-97M features a maximum illuminance memory display function in addition to the standard illuminance measurement mode.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● Auto range switching (Ix: 40/400/4,000/40,000/400,000) ● Easy data management with data hold function and Max.Min.Ave display function

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

This is an affordable illuminance meter that supports a wide range of measurements from low light levels of 0 to 40.00 Lux, 400.0 Lux, 4000 Lux, 40.00 kLux, to ultra-high light levels of 400.0 kLux, with a 5-range switch. The sensor unit is separate from the main body, allowing you to orient the sensor in the optimal direction for more accurate illuminance measurements.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● It comes with a data logger function (7,000 points). ● Data can be transferred to a PC via the RS232C interface. ● It has zero adjustment and angle deviation correction functions, allowing for high-precision measurements. ● Suitable for measurements in warehouses, factories, offices, schools, etc.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● The manual range switch allows for a wide range of illuminance measurements from 0 to 400,000 Lux / 40,000 foot-candles (fc). ● It automatically compensates for differences in light sources, enabling illuminance measurements with any type of light source, such as tungsten bulbs, fluorescent lights, mercury lamps, and sodium lamps.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Low-cost energy saving This is a stationary multi-sensor active tag equipped with low power consumption wireless IC. ●Long lifespan When used under standard settings, the battery lasts for approximately 10 years. ●Equipped with various sensors It has built-in temperature, humidity, illumination, acceleration, and pressure sensors, capable of wirelessly transmitting sensor data. ●LCD display function The built-in LCD screen allows for real-time monitoring of sensor data. ●Vibration detection function When detecting acceleration above a specified threshold, the wireless eco-sensor automatically transmits data. ●Communication distance It can communicate up to approximately 50 meters with the built-in chip antenna. ●Micro SD card compatible By inserting a micro SD card, it can record up to approximately 10 million data points. ●Wall mountable It can be installed on a wall using the included wall hooks. ●Radio law construction design certification

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The light intensity sensor with a cable that can be extended up to 50 meters is a separate type, allowing it to be installed in the correct position for measuring light intensity.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

This series converts and outputs light and radiation amounts in the spectral range of UVA, UVB, and UVC, as well as in the wavelength range of 400 to 950 nm, into signals of 0-10V or 4-20mA, measured in illuminance (Lux), luminance, equivalent light curtain luminance (cd/m²), or radiant intensity (W/m²).

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

UVA/UVC SD card memory 2 range switch (2mW/cm² and 20mW/cm²) RS-232C output

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Measurement range: 0 to 200.000 Ix 4 range switching Angle deviation correction Zero adjustment function Data hold (Max, reading value) function included Low battery indication function

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

An all-in-one colorimeter that integrates all functions such as display and operation buttons. It eliminates the need for cumbersome computer operations, allowing anyone to easily and accurately perform measurements with groundbreaking usability. Simply turn on the power switch, place the sample, and press the measurement button. With just these few steps, anyone can quickly and easily take measurements. Additionally, the measured data can store up to 4,000 colors, and color difference reference data can be saved for up to 1,000 colors, with smooth retrieval. ● Large color LCD that supports kanji A large 5.7-inch color LCD display comparable to a car navigation monitor. The colorful graphic display achieves instrument-like visibility and usability. The color LCD display can be set to one of seven languages: Japanese, English, German, French, Spanish, Italian, and Chinese, making it easy to align with overseas offices and clients. In particular, the Japanese language is displayed in kanji, providing unprecedented visibility when combined with the color LCD.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1A-2128M is a new type of solar power meter with added multimeter functionality. It allows for the measurement of solar irradiance while simultaneously measuring voltage and current with a multimeter, making it easy to evaluate solar panels.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1M-318M, used to measure solar radiation intensity, is a solar power meter that can measure solar radiation intensity up to 1999 W/m² with range switching.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1M-317M, used to measure solar radiation intensity, is a solar power meter that can measure solar radiation intensity up to 1999 W/m² with range switching.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1T-2418M is a solar power meter that can measure solar radiation intensity up to 1999 W/m² with range switching.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

This is a high-precision spectrophotocolorimeter that can measure the wavelength range of 380nm to 780nm with an output interval of 5nm for reflection and transmission samples. For reflection samples, simultaneous measurement including (SCI) or excluding (SCE) the specular reflection component is possible, and measurement of samples containing fluorescence can also be performed by applying a UV cut filter. For transmission samples, a wide sample chamber with a sliding door design allows for easy measurement of large samples. It is ideal for color management of materials such as resin, glass, liquid crystal components, and metallic surfaces.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

- Various measurement modes. (Data hold, MAX, MIN display) - Convenient for measurements in dark places with backlight. - Equipped with SD card (1-16GB) data logger function - Recording interval can be set from 1 to 3600 seconds - Compatible with USB/RS-232C interface

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

- Various measurement modes. (Data hold, MAX, MIN display) - Convenient for measurements in dark places with backlight. - Equipped with SD card (1-16GB) data logger function - Recording interval can be set from 1 to 3600 seconds - Compatible with USB/RS-232C interface

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● A compact type that fits in the palm of your hand. It is battery-operated, allowing for easy portability. ● Comes standard with easy and convenient PC software.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1T-139M is a low-cost digital illuminance meter that supports a wide range of illuminance measurements from 0 to 400,000 Lux / 50,000 foot-candles (fc) with automatic range switching. It displays illuminance in both numerical and bar graph formats. The MI1T-139M automatically compensates for differences in light sources, allowing for illuminance measurements with any type of light source, including tungsten bulbs, fluorescent lights, mercury lamps, and sodium lamps.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The MI1TT-889M, which has a built-in data logger function, can store illuminance data with date and time for up to 16,000 entries and allows you to download measurement data to a computer. You can start and stop the data logger measurements up to 99 times, and save them as different data files. The measurement data is saved in a dedicated file format as well as in text file format, making it possible to view the data in Excel. Additionally, with the MI1TT-889M, you can press the memory key on the device to store the current illuminance data along with the date and time for up to 99 entries. Not only can the data be downloaded to a computer, but you can also view the illuminance value data along with the date and time by pressing the key on the device.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment