シロ産業 Product Lineup

● Measurement with different load values (e.g., measuring film) Measurements with different ranges can also be achieved by changing the sensors. Film puncture strength, pressure resistance strength, friction coefficient measurement. ● Measurement of different forces (e.g., real vehicle inspection inside a car) Torque measurement of dashboard rotary switches, force measurement of brake pedals. Both can be measured with a single display unit. ● Easily interchangeable for use. ● Can also be used handheld. Operating force of levers, peeling strength of tape, force to press buttons. ● Also suitable for stand measurements. 90-degree peel test of adhesive tape, pressure resistance test of containers and packaging, tensile strength test of wires.

• Strength Testing Equipment

●Pen-type load cell, maximum load: 50N ●Can be held by hand to apply force, allowing for measurement of small areas.

• Other measurement, recording and measuring instruments

● Measurements in environments where water may splash are also possible. ● A connection to a display unit (M1E-ZTI) is required for outputting load values.

• Other measurement, recording and measuring instruments

● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples.

• Other measurement, recording and measuring instruments

●Maximum load: 2000N-20kN ●Fix the equipment so that the lead wire protrudes, and measure the load applied in the compression or tension direction. *Only unidirectional forces in compression or tension can be measured. Please decide the installation orientation according to the direction of the load.

• Other measurement, recording and measuring instruments

● Since it can ascend and descend simultaneously with two units, it allows for easy height adjustment at a low cost for large workpieces. ● By using a ball screw type AC motor, it is possible to operate the two lifters almost evenly at the same time. ● It is ideal for securing work lines. ● Low price comparable to hydraulic lifters. ● 3-phase AC 200V power supply. ● Bellows-type full cover (indicated by J at the end). ● Foot switch with LED. ● Maximum usage frequency of 80 times/hour; maximum startup frequency of 10 times/minute. ● Equipped with upper and lower limit switches. ● Supports continuous use for up to 100,000 times.

• lift

- Since it can raise and lower two units simultaneously, it allows for easy height adjustment at a low cost for large workpieces. - By using a ball screw type AC motor, it is possible to operate two lifters almost evenly at the same time. - It is ideal for securing a work line, among other applications. - Priced comparably to hydraulic lifters. - 3-phase AC 200V power supply. - Bellows-style full cover (indicated by J at the end). - Foot switch with LED. - Maximum usage frequency of 80 times/hour and maximum startup frequency of 10 times/minute. - Equipped with upper and lower limit switches. - Capable of continuous use for 100,000 cycles.

• lift

● The main brush and side brush efficiently clean corners. ● Dust container with a handle for easy removal. ● Adjustable height for the side brush (the M1567-915W also allows for main brush adjustment). ● The handle height can be adjusted for easy operation. ● The handle folds for compact storage, saving space, and can be stored vertically.

• Industrial Vacuum Cleaners

● Compact, lightweight, and suitable for narrow spaces ● Sensors can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Suitable for both compression and tension ● Screw: Male thread (M8)

• Other measurement, recording and measuring instruments

● Easy integration with corner equipment and external devices ● Usable for both compression and tension, can be screwed in, rectangular shape

• Other measurement, recording and measuring instruments

●Angle-adjustable type Both for floor placement and ceiling suspension, angle adjustment is possible up and down! Air can be blown towards the target without using tools. ●Can be installed as a ceiling suspension type using beams in the factory Can be used for air blowing and circulation in a space-saving manner.

• Other environmental equipment
• Other air conditioning equipment

● Easy-to-read LCD display Real-time measurement values (updated every 15 seconds), battery level, status ● Diverse recording modes Normal recording mode (records at specified intervals) Burst mode (shortens recording interval when exceeding specified "threshold") Statistics mode (records minimum, maximum, average, and standard deviation σ) ● Convenient alarm function Alarm activates (sound/display) when exceeding the set "threshold" ● Large capacity memory Up to 84,000 samples (128KB memory) ● Start/Stop settings Timer start/stop, button start/stop (restart) ● Bluetooth functionality Wireless communication within approximately 30m range, excluding obstacles ● USB communication Operation via software (free) on a computer (USB cable sold separately) ● Two power options Four AA batteries or USB power supply ● Calibration of CO2 sensor Automatic calibration function based on atmospheric concentration (400ppm) and manual calibration function

• Thermo-hygrometer

Multifunctional Waterproof Certificate issuance available

• Thermometer

● The step stool comes with soft non-slip pads. ● When you step on the stool, the spring-loaded casters retract inward, securing it in place and preventing movement. ● Its round shape minimizes damage to walls and furniture. ● Weight capacity of 158 kg.

• Other work tools

● Tabletop impulse-type endless sealer with heating temperature control function The impulse-type endless sealer equipped with a heating temperature control function (On-Pal) enhances the advantages of impulse sealers, which do not require preheating and only energize the heater during the heating process. It is a highly efficient sealer that does not consume unnecessary power while maintaining the set heating temperature for sealing. ● Sealing speed (up to 7m/min) The traditional heat plate belt sealer maximizes the characteristics of heat plate sealers. The strength of the heat plate belt sealer is that once the heater reaches the desired temperature, sealing can be performed very quickly. The tabletop impulse-type endless sealer combines the advantages of both impulse sealers and belt sealers, allowing for faster operations and beautiful seals. The sealing speed can be adjusted within the range of 2 to 7m/min.

• Other packaging machines

● The compact and lightweight pole allows for easy protection even by one person!! ● No need for protective tape or ladders ● Shuts out dust and debris ● Does not damage ceiling paint or wallpaper ● Can be used multiple times

• Other office supplies

● Super slim, compact design that can be installed in any location/direction. ● The blow direction changes by rotating the nozzle. Comes standard with a rotating corner nozzle. ● Easy nozzle replacement and cleaning of the needle electrode. ● Alarm output and daisy chaining are possible. ● Operation lamp that clearly indicates the operating status. ● Simple installation, secured with two screws.

• Industrial Vacuum Cleaners

■Compact and Lightweight Air Nozzle Type Ionizer - Achieves miniaturization by compactly integrating a high-voltage power supply into the main body case. - Uses compressed air to perform powerful static elimination and dust removal. - Can also use clean air or N2 (nitrogen gas). - The M326N-3V main body has screw holes for easy attachment to workpieces and other surfaces.

• Industrial Vacuum Cleaners

Since both ends of the load cell have male threads, it can be fixed to equipment, and connections such as eye bolts are also possible. Despite its small size, it can measure up to 5000N.

• Other measurement, recording and measuring instruments

● Detects leaks of refrigerants such as freon and sounds an alarm. ● Available in explosion-proof and waterproof types, allowing detection in various locations. ● Can be centrally managed using a multi-control panel (sold separately) for 2 to 24 units. ● Equipped with connection output that allows linkage with external devices such as ventilation fans. ● Equipped with linear, analog outputs, and digital (relay) outputs that are compatible with most BMS (Building Management Systems).

• Other measurement, recording and measuring instruments

It is ideal for small dispensing of contents.

• Other conveying machines

● The weight has been reduced. Achieved 100kg despite being a drum inverter. Weight reduction (approximately 10% compared to standard M20M-1100S) ● It has become more compact. Despite being a drum inverter, the turning radius has become as small as that of a transport vehicle (R1135mm). Overall width, length, and height have been reduced. * The overall length is a minimum of 1010mm when the pedal is folded. ● Equipped with a swivel chuck <patented by the manufacturer> The swivel chuck makes it easier to grasp the drum and allows for more secure locking.

• Other conveying machines

●Peace of mind with the adoption of interchangeable probes Interchangeable probes that can be easily removed with one touch. In the event of a failure, measurement can continue simply by replacing and calibrating the probe. ●Convenient stand for measurements The probe can be placed on a stand, making it convenient for fixed-point measurements. This enhances the reliability of the data.

• Other measurement, recording and measuring instruments
• Other measurement, recording and measuring instruments

●Handheld counseling tool ●Compares the analysis results of the customer's skin with the average values for each age group and displays the evaluation as A, B, or C. ●Measures 8 items: skin texture, spots, oil content, skin color, keratin, pores, crow's feet, and moisture.

• others
• Other electronic measuring instruments

●Convenient operation method ●Production of 5 types of cushions ●Technology verified in America and Europe

• Other packaging machines

Simple operation with just a footswitch. Contributes to improving the efficiency of logistics operations with motor direct drive.

• Other packaging machines

<Vertical Vegetable Electric Slicer Dedicated Workbench with M2503B-H961TEPC-SET> ● In addition to regular cuts, it can make thick cuts of daikon, carrots, lotus root, sweet potatoes, and other directional vegetables that are difficult to cut with conventional large conveyor slicers. It is suitable for items that cannot be cut well due to materials dancing on the conveyor. ● The base plate has an opening, allowing materials to drop into a container placed on a cart, providing excellent work efficiency. ● The large diameter feed opening of 110×150mm allows for half a cabbage to be inserted at once. Despite its compact design, it has a feed opening larger than that of larger machines, ensuring outstanding work efficiency. ● The electrical components can be removed, making post-use cleaning easy. <Vertical Vegetable Electric Slicer Dedicated Workbench M2503B-STAND> ● Made of durable all-stainless steel. It uses sturdy 3mm thick stainless steel, making it ideal for wet work environments. ● A large container can fit under the workbench, allowing for continuous dropping of cut materials.

• Other safety and hygiene products

● The display part rotates, making it easy to adjust the display surface to the front position even after installation. It features a peak hold function and a full 4-digit LCD display with a backlight. The external power-driven model also supports analog output. ● This product accommodates eccentric loads (usable up to a 2° incline) by tilting the piston part. ● It is a new type of hydraulic load cell that uses a digital gauge while being priced affordably. ● Its lightweight and slim design makes installation and portability easy.

• Other measurement, recording and measuring instruments

● Adoption of quick turn specifications. The central two wheels of the six-wheeled vehicle are fixed, allowing the cart to rotate in place. Even large carts can change direction with minimal space. ● The turning radius is less than half that of conventional four-wheeled vehicles.

• Trolley

Sand weight type mark sign!!

• Other safety and hygiene products

●Achieving low prices ●Compliant with JIS C1609-1:2006 General Type A ●Compact, lightweight, and wide-range measurement ●Easy operation with a single button ●Calibration support (recommended once a year)

• Other measurement, recording and measuring instruments

● Filter replacement is easy Easy to move and easy to install. Filter replacement is also easy. ● Capable of smoke and air purification in two locations This unit can purify smoke and air in two locations. ● Portable type This portable solder fume extractor features an energy-saving design that makes it easy to move. It can accommodate up to two smoke ducts, allowing it to be used simultaneously in two work areas.

• Dust collector

● When elevators are unavailable due to a disaster, you can smoothly descend the stairs while seated. ● When not in use, it can be compactly stored and is easy for anyone to operate, making it ideal for deployment in various facilities, hospitals, and companies. ● On stairs, it can descend at a speed comparable to that of the operator due to the friction of the rubber-belt. ● It has four wheels, allowing for stable movement on flat surfaces. ● By securing the abdominal and head areas with a belt, there is no risk of falling, allowing passengers to evacuate safely. ● There is no need to fold the wheels during descent, making it safe and easy to operate.

• Other safety and hygiene products

● Quickly transportable with handles at the front and back for stairs ● Great performance in limited spaces ● Convenient handle for stairs and similar situations ● Folds up for storage when not in use

• Other safety and hygiene products

● This is a slim type with a minimum fork height of 51mm. ● The road wheel is a single type and moves lightly during operation.

• Other conveying machines
• palette
• Other measurement, recording and measuring instruments

● It is a thin type with a minimum fork height of 55mm. ● It is equipped with a slowdown function as standard, allowing for quiet descent when the control lever is pulled to the highest position. ● The steering wheel and load wheels are made of polyurethane, making it easy to transport without leaving marks on the floor and keeping it clean. ● The handle features an ergonomic design based on human factors. ● It is a convenient transport device that scoops up loads on flat pallets with the fork and is manually transported.

• Other conveying machines
• palette
• Other measurement, recording and measuring instruments

●Sturdy design made of polypropylene. Excellent durability, with minimal rust, dents, and chips. ●Drawers with three different depths featuring a steel suspension slide mechanism.

• Storage
• Other conveying machines

● Comes with six drawers for easy organization and storage of small parts and metals. ● The tabletop is set at a convenient height, making it useful as a workbench. ● Equipped with casters that are less likely to leave marks on the floor.

• Storage
• Other conveying machines

This is a space-saving manual movable rack designed to eliminate the need for foundation work and facilitate easy installation.

• Office furniture

This is a space-saving manual mobile rack designed to eliminate the need for foundation work and facilitate easy installation.

• Office furniture

We do not use filters, electricity, or freon gas.

• Other physicochemical equipment

● Removes moisture more easily and reliably than other air dryers. ● Energy-saving, running cost of 0 yen ● Kind to the company, kind to the Earth, hybrid system

• Other physicochemical equipment

● Very easy to handle Just place it in the grease trap's oil tank, and it absorbs oil well. No special equipment is needed, and anyone can easily clean it. Its net structure makes it easy to remove. ● Amazing oil absorption power! It has about four times the oil absorption capacity compared to common synthetic fibers (polypropylene)! It can hold approximately 40 times its own weight in oil. Additionally, it does not sink in water even when it absorbs oil. ● Environmentally friendly with natural materials This product is derived from natural plant sources. It is environmentally friendly and can be disposed of as combustible waste. Furthermore, oil enters the hollow fibers, so once it has absorbed oil, it does not release it back.

• mat

● Pocket-sized, compact and lightweight Small size of 136 x 61mm / 130g (MC58TDL-16S) ● Multi-temperature and humidity logger with high precision and high resolution Humidity accuracy ±1.8% ● Choice of sensor type and cable length Selection of ultra-compact temperature and humidity sensor / waterproof temperature and humidity sensor, cable lengths of 3m / 5m ● Variety of selectable sensors Mixing of thermocouples, ultra-compact temperature and humidity sensors, and waterproof temperature and humidity sensors is possible.

• Thermometer

● Easy to get on and off with dual-side elevation ● Equipped with "tare" and "preset tare" functions for easy subtraction of cart weight ● Capable of measuring up to 200kg ● Compatible with both AC adapter and battery power ● Auto power-off time settings available (5 minutes, 10 minutes, 30 minutes, 60 minutes, continuous) ● Slim measuring platform for easy access

• Scale