シロ産業 Product Lineup

This is a desiccant that physically adsorbs high-safety clay (viscous) type water vapor. Compared to silica gel and other viscous desiccants, it shows a very large moisture absorption capacity in low humidity areas. The raw materials comply with the US FDA's GRAS (Generally Recognized as Safe) standards. It is an excellent desiccant with a large moisture absorption capacity in low humidity. It is compliant with MIL D-3464 TYPE 2, using dust-proof non-woven fabric, and can be used for various applications.

• Drying Equipment

Silica gel desiccant is a synthetic desiccant that is created by solidifying a colloidal solution of silica, which is moderately to strongly acidic. It has fine pores of about 20 Å internally and physically adsorbs water vapor. Its moisture absorption capacity and other performance characteristics are standardized by JIS-Z-0701, and it demonstrates high effectiveness in moisture-proof packaging across a wide range of fields, from food to electronic components.

• Drying Equipment

● 2.8-inch TFT screen ● Infrared resolution: 256×192 ● Frame rate: 25Hz ● Temperature measurement range: 30°C - 45°C ● Accuracy: ±0.5°C ● Imaging function and SD card function ● PC software analysis ● Point temperature measurement ● Real-time image transmission ● Visible light (640×480) ● Type-C USB interface for lithium battery charging ● Tripod mount

• Radiation thermometer

The air particle monitor adopts a light scattering method and can monitor the number and mass concentration of suspended particles (0.3μm and above) such as dust and aerosols in the installed space in real-time. It is equipped with features to monitor labor environments such as dusty spaces and clean rooms, and it has analog output (DC 4-20mA) and contact output (DC 30V 2mA, AC 250V 2A) functions, which can improve energy-saving effects by collaborating with ventilation equipment and contribute to reducing the risk of equipment failure due to dust intrusion into the panel. Furthermore, with the built-in WiFi function, it is possible to monitor the values in real-time from remote locations by linking with a handheld smartphone or computer. ■Features ● Detects particles from 0.3 microns ● 4-20mA current output and contact output (1c) ● Auto calibration ● Current dust concentration can be viewed on PC or mobile ● Mass concentration: 35-1000μg/m³ (cleanliness equivalent value: 10,000 particles/cf)

• Other inspection equipment and devices

Stopper function, snap lock, handle, with drain cap In the case of installation on a ship, if the container is full (with fresh fish, ice, water, etc.), there may be instances of water leakage depending on the ship's movement. Please be aware of this in advance.

• Refrigerators and freezers

It is convenient as a small storage tank. It comes with a hand hole cap (gray). It has measurement markings. The liquid level is visible, making it easy to see. It has a recessed handle, making it easy to carry.

• tank

■Type: Built-in Type The M2454LED-FS12T, which supports both vertical and horizontal placement, is a slim type of commercial insect trap made of rust-resistant stainless steel that can be built into gaps in fixtures. For focused measures in areas with high insect intrusion, such as near doors or around dishware fixtures, the larger floor-standing type PW with a wide adhesive surface is recommended.

• LED fluorescent lamp

By introducing insect traps, it is possible to prevent foreign matter contamination and infectious diseases. The sophisticated design allows for discreet and natural pest control in restaurants and hotel lobbies.

• LED fluorescent lamp

■Flexible Arm The arm can be moved freely, allowing for easy replacement of the sheet, and it can be quickly adjusted so that the adhesive surface is not visible to guests or visitors. ■Insect Catching LED The insect-catching LED is a unique lamp that incorporates wavelengths preferred by insects while maintaining long life and energy efficiency.

• LED fluorescent lamp

An LED insect trap that combines specifications and design. By introducing an insect trap, you can prevent foreign matter contamination and infectious diseases. Its sophisticated design allows for discreet and natural pest control in restaurants and hotel lobbies.

• LED fluorescent lamp

●Equipped with quantitative measurement function, rank sorting function, and checker function It demonstrates outstanding power in product sorting and inspection tasks. (Only for MH2DS-300K-** series / MH2DS-300N-** series) ●Double-sided display type (MH2DS-300D-30Y) ●Achieves a weighing speed of less than 0.6 seconds ●Battery life of approximately 3,000 hours (when using alkaline batteries)

• Scale

Enhanced detection power Notifies with light and buzzer for broken needles, etc. Always clean with antibacterial processing User-friendly handheld type Detection of metal fragments such as broken needles mixed in apparel products Identification of detection location after detecting metal fragments with conveyor inspection machines, tabletop inspection machines, etc.

• Other inspection equipment and devices

● Step height: 16-21 cm (depending on the worker's ability) ● The size of the old model cargo platform has been enlarged from 470×280 mm to 470×300 mm by 20 mm. ● The thickness of the old model has been reinforced from 4 mm to 7 mm, increasing the load capacity from 150 kg to 200 kg. ● There are belt loops on the top, bottom, left, and right to securely fix the cargo. ● By attaching the separately sold two-wheel kit, it can be used as a convenient two-wheel cart for everyday use. ● Please read the precautions for using the stair transport vehicle and use it within the worker's ability range. ● Due to storage in the warehouse, there may be minor scratches from contact between metal parts, but please forgive any slight scratches that do not affect use. ● Repair parts are in stock. ● This product is covered by PL insurance.

• Trolley

● The built-in cutter and cutter guide significantly enhance safety and efficiency. You can cut quickly, straight, and easily. ● You can work in a comfortable posture, alleviating issues such as back pain.

• Cushioning material

Electrostatic prevention container Prevents static electricity buildup, making it convenient for handling powders. Made of polyethylene, it is lighter than metal (approximately 7.5 kg). Adopted by raw material manufacturers and well-received. Can also be used for food applications.

• tank

Extra-large press cart

• Trolley

360° Audio/Video Talkback Life Detector

• Color camera

■M623MG300-NETM1FTK Features ● Assembled type ● Maximum mesh security of 78×48mm ● Includes connection fittings and hooks ■M623MG300-NETMIDBK Features ● Automatically locks the wheels when the handle is released. ● Safety driving specifications allow for speed adjustment during travel. ● Finished product

• Trolley

Refrigerated transport box for COVID-19 vaccines There are two types: a refrigerated type with a temperature of 2-8°C and a frozen type below -15°C, each available in three variations.

• Refrigerators and freezers

Grabo Plus is useful for lifting, moving, and installing heavy and hard-to-handle materials such as stone, tiles, glass, wood, steel, and furniture at job sites or in factories.

• Other assembly machines

By removing the lower central partition, you can store not only drums but also entire wagons and other items.

• Food storage equipment and facilities

The MF2PTM-7711H measures low concentrations of free chlorine/total chlorine. It is a single device that supports both free chlorine, which is primarily measured to confirm the presence of chlorine (in drinking water, well water, pools/baths, building/facility management, etc.), and total chlorine, which is measured to confirm the presence of minimal chlorine (such as in factory wastewater). The measurement uses DPD reagents specified by official methods, ensuring high reliability. Additionally, the device allows for numerical verification and calibration using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

The MF2PTM-7710H can measure low concentrations of free/total chlorine as well as pH (0.00–5.00 mg/L; 6.5–8.5 pH). It is used for checking applications where chlorine is minimal, such as tap water, well water, pools/baths, building management, and factory wastewater. The dedicated reagents used for measurement can be selected according to the frequency of use. Additionally, this device allows for numerical verification and calibration using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

Aluminum ions will be measured with the MF2PTM-7712H (0.00 to 1.00 mg/L). The dedicated reagents used for measurement can be selected according to the frequency of measurements. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

The MF2PTM-7707H is a portable digital spectrophotometer that measures nitrite nitrogen (0 to 600 μg/L). The dedicated reagents used for measurement can be selected according to the frequency of use. Additionally, this device allows for numerical validation and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

The MF2PTM-7706H phosphorus ion meter measures phosphorus (0.0 to 15.0 mg/L). The dedicated reagents used for measurement can be selected according to the frequency of use. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

The MF2PTM-7705H is a low-concentration silica measuring device that measures low concentrations of silica (silicon dioxide) ranging from 0.00 to 2.00 mg/L. The dedicated reagents used for measurement can be selected according to the frequency of measurement. Additionally, this device allows for numerical validation and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

Hydrazine will be measured using a digital spectrophotometer (0–400 μg/L). The dedicated reagents used for measurement can be selected according to the frequency of measurement. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

• Water quality testing

The MF2PTM-7700H is a portable digital spectrophotometer that measures low concentrations of ammonia nitrogen (0.00 to 3.00 mg/L). The dedicated reagents used for measurement can be selected according to the frequency of use. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set), ensuring high accuracy and reliability. ● The advanced optical system employing a beam splitter improves reproducibility and stability. ● The light source has been upgraded from a conventional tungsten lamp to an LED, demonstrating excellent performance. ● Navigation function for measurement procedures. ● The waterproof function of the main unit case has been upgraded to IP67 (the insertion part for the glass cell is also more waterproof). ● Automatic logging function for 50 data points. ● Battery level (%) is always displayed on the screen. ● Time setting is possible (year, month, day, and time). ● Backlight function for better visibility. - The reagents used for measurement are the same; you can use the ones you already have. - The validator used for verification and calibration of the measuring device is different. - The glass cell for sample insertion is the same, but the cap (black lid) is different.

• Water quality testing

The MF2PTM-7701H is a portable digital residual chlorine meter that measures low concentrations of free chlorine (0.00–5.00 mg/L). It is used in a wide range of fields, including tap water/drinking water, well water, pools/baths, and building/facility management. It also plays a role in measuring residual chlorine for the prevention of Legionnaires' disease. The measurement uses DPD reagents specified by official methods, ensuring high reliability. Additionally, the device can be validated and calibrated using a validator (standard solution set), maintaining high accuracy and reliability for peace of mind.

• Water quality testing

- The advanced optical system utilizing a beam splitter improves reproducibility and stability. - The light source has changed from traditional tungsten lamps to LEDs, demonstrating excellent performance. - Navigation function for measurement procedures. - The waterproof function of the main body case has been upgraded to IP67 (the insertion part for the glass cell is also more waterproof). - Automatic logging function for 50 data points. - Battery level (%) is always displayed on the screen. - Time setting is possible (year, month, day, and time). - The backlight function has been added for better visibility. - The reagents used for measurement are the same; you can use what you already have. - The validator used for the verification and calibration of the measuring instrument is different. - The glass cell for holding samples is the same, but the cap (black lid) is different.

• Water quality testing

Thorough disinfection from every angle This professional-grade gun spray uses the principle of electrostatic induction to effectively and uniformly distribute disinfectant on surfaces. It is lightweight and easy to hold, equipped with a lithium battery for cordless operation, allowing for hours of hygiene management anywhere. The solution is sprayed as a fine mist, which is attracted to the surface being disinfected, effectively adhering and coating it.

• Other environmental equipment

Trust that continues to be chosen for heat stroke measures not only in factories but also in gymnasiums and martial arts dojos. Achieving heat stroke measures, ventilation promotion, and COVID-19 countermeasures all at once. An auto-swing louver is built into the body. The louver swing angle is 60°.

• Cooling system

The ultra-low adhesive seal tape can be applied and removed from paper without leaving residue or damaging the paper. It can be easily applied and removed from coated paper, Kent paper, and high-quality paper. The tape is made of a blue semi-transparent film, allowing the text and content of the underlying surface to be visible.

• Adhesive tape

■Features MD23TA-1012HPBXT ● Open bottom for discharging contents ● Equipped with auto-lock support for anti-tipping ● New structure that prevents interference between the support and the hanging ring ● Bottom plate covered with steel plate The open bottom allows for discharging contents, improving work efficiency ■Features MD23TA-1012HP2FT ● Wire mesh lid prevents contents from falling ● Can be added or removed ● Can be locked with a padlock. Can be operated together with existing box pallets.

• palette

● Easy operation with 1 & 2 STEP: Just add water and press a button. ● Fast ice-making in about 6 to 13 minutes: Ready whenever you need it. ● Two sizes available: S and L. Ice in a hole-punched cap shape made to suit your needs.

• Refrigerators and freezers

Waterproof and dustproof high-volume hanging fan, 3-phase 200V (Made in Japan) M1357WP-100EFS, suitable for ventilation assistance, drying, and condensation suppression. Equipped with a DC brushless motor With front and rear guards High-volume hanging fan suitable for improving the environment in agricultural warehouses.

• Cooling system

No counting errors by people 100% inventory management Faster counting by people Can be summarized by the number of instructions Provision of compact and inexpensive counting devices

• Counting Machine

● Smooth access to the table and upper container. ● The opening of the middle section is wide, making it easy to put in and take out products. ● M429PT-75AS: A large folding container in the 75L class can be placed, and the balance of the openings of the upper, middle, and lower containers is good, allowing for easy handling of products at any level.

• Other conveying machines

■Explosion-proof measures ● No electric heaters are used in the heating section. - The heat source for sealing is "high-temperature saturated steam," so there are no ignition sources that could lead to an explosion at the sealing area. - The sealing temperature is set by steam pressure, so the sealing heating temperature does not rise to the ignition temperature. ● No electricity is used in the drive system. The drive control employs an "air sequencer" that does not use electricity at all. The control system, which rotates the cam with an air cylinder and opens and closes the air valve through the air sequencer, does not have any ignition sources that could lead to an explosion.

• Other packaging machines

● An electric heater is not used in the heating section. - The heat source for sealing is "high-temperature saturated steam," so there are no ignition sources, which are potential hazards for explosions, in the sealing area. - Since the sealing temperature is set by steam pressure, the sealing heating temperature does not rise to the ignition temperature. ● Electricity is not used in the drive system. The drive control employs an "air sequencer" that does not use electricity at all. The control system, which rotates the cam with an air cylinder and opens and closes the air valve using the air sequencer, does not have any ignition sources that could lead to explosions.

• Binding/Packing Machine

It has a small compact size and weighs about 15 kg. It is maneuverable and can also go up and down stairs, making it possible to transport it on narrow staircases in places like apartments.

• Trolley

● 75% reduction in operating force on uphill slopes (150kg load at 7° incline) ● Maximum load of 300kg (150kg on a 7° incline) ● Can be used as a hand-pushed cart when the power is off ● Safe stopping with the use of a motor brake ● Safe stopping with the use of a cartridge brake ● Easy replacement with the use of a cartridge-type battery ● Support for electric assist unit only is also possible

• Trolley

The adoption of a needle probe allows for the quick measurement of the center temperature of meat patties, chicken, and fish fillets as specified in the FDA Food Code 4-302.12 (B). This thermometer, M994M-2219016D, is NSF certified and can assist in complying with HACCP food safety standards. It is also an ideal tool for use in any facility involved in food preparation, cooking, maintenance, serving, storage, as well as distribution centers, refrigeration, and food processing facilities. It can be used to comply with FDA Food Code 4-203 and to meet HACCP planning and requirements. The M994M-2219016D features a sophisticated needle probe designed to meet industry standards for measurement accuracy, durability, and display visibility. It meets the specifications required for professional use, such as in commercial settings, and is designed and manufactured to meet stringent performance specifications.

• Thermometer

● It allows for the visualization of airflow conditions in clean rooms and clean equipment. Compared to conventional models from manufacturers, it has been made smaller and lighter, improving usability. ● The fine mist of 3μm particles makes it easy to confirm airflow. ● In addition to the AC100V power supply specification, there is also a convenient battery-operated version. (M1242V-502A1DCA) ● The ULPA filter specification can visualize airflow in ISO Class 4 (Class 10). *Optional

• Other measurement, recording and measuring instruments