藤川伝導機 List of Products and Services

The "Atsukan Servo" is an electric hydraulic actuator that uses a bidirectional discharge hydraulic pump. By changing the discharge direction of the hydraulic pump, it can achieve the same control as a directional control valve, eliminating the need for a flow control valve. Furthermore, it has become possible to arbitrarily control the pressure of the hydraulic fluid through torque control. Additionally, it uses a very small amount of hydraulic fluid, and mineral-based oil, which makes waste oil disposal easy, can be used. 【Features】 ■ High thrust capability ■ Load holding capability ■ Space-saving stroke ■ No control valve required ■ Space-saving hydraulic tank *For more details, please download the PDF or feel free to contact us.

• Actuator
• Hydraulic Equipment

The "35RP2" is a rack and pinion type rotary actuator that is fully compatible in dimensions and mounting with the 35RP. Thanks to its unique backlash elimination mechanism, it has eliminated play at the rotation end. The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. Additionally, a magnet is standardly built into the piston section, allowing for the installation of a switch later on. 【Features】 ■ Five types of cylinder inner diameters ranging from φ32 to φ80, with three types of support forms: SD type, FA type, and FB type. ■ The unique backlash elimination mechanism has removed play at the rotation end. ■ The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. ■ The switch is standardized to the highly versatile magnetic proximity AX and AZ type switches. *For more details, please download the PDF or feel free to contact us.

• Actuator

This document summarizes information regarding the rack and pinion rotary actuator '35RP2'. It includes various information such as internal structure diagrams for different swing angles, a packing list, and a detailed parts list. Additionally, it contains notes on precautions when installing the valve seal, so please make use of it. [Contents] ■ Swing angle 90° ■ Swing angle 180° ■ Packing list ■ Parts list ■ Precautions *For more details, please download the PDF or feel free to contact us.

• Actuator

This document summarizes information regarding the hydraulic high-low table that we handle. It includes a variety of information such as common precautions for hydraulic high-low tables, features, and selection criteria for sizes. Additionally, it also contains information about the dimensions and accessories of each product. Please make use of it. 【Contents (partial)】 ■ Hydraulic High-Low Table / Common Precautions 1 ■ Hydraulic High-Low Table / Common Precautions 2 ■ Hydraulic High-Low Table / Common Precautions 3 ■ Hydraulic High-Low Table / Common Precautions 4 ■ Hydraulic High-Low Table / Common Precautions 5 *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

We would like to introduce our rack and pinion type rotary actuator, the "HTR/M series." The "HTR series" features high-load tapered roller bearings, chrome alloy steel racks and pinions, and high-strength ductile cast iron housings, making it suitable for a wide range of devices and production equipment. The "M series" adopts a structure that allows for inspection and replacement of the piston packing without disassembling or separating the output shaft, making maintenance easier. 【Features (HTR series)】 ■ It can transmit torque while supporting the load on the output shaft, potentially eliminating the need for external support bearings. ■ By adopting an optional cushioning mechanism, it can reduce external loads. ■ The piston uses durable urethane rubber seals and wear rings. ■ The output shaft employs low-pressure seals. *For more details, please download the PDF or feel free to contact us.

• Actuator

This document is a selection guide for rack and pinion type rotary actuators that we handle. It includes information on selecting sizes for cases where only static forces, such as clamping, are needed, as well as for moving loads, and checks for cushion allowable energy. Additionally, it provides checks for radial and thrust loads, a table for calculating moment of inertia, and examples of selecting rotary actuators. Please make use of it. [Contents (partial)] ■ Size selection ■ Cushion allowable energy check ■ Radial and thrust load checks ■ Moment of inertia calculation table ■ Examples of selecting rotary actuators *For more details, please download the PDF or feel free to contact us.

• Actuator

This document contains common precautions regarding the high-low tar that we handle. It includes a wealth of information on design considerations, selection, installation, piping, lubrication, air quality, and more. Additionally, it provides precautions related to maintenance inspections and usage environments. Please make use of it. [Contents (partial)] ■ Design considerations ■ Selection ■ Installation ■ Piping ■ Oil suction *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog contains information related to "Hydraulic Pumps." It includes a wealth of information such as product features, minimum and maximum rotational speeds, pressure ratings for single, double, and triple pumps. Additionally, recommendations for starting procedures and information on shafts and couplings are also included, so please make use of it. [Contents (partial)] ■Features ■Minimum and maximum rotational speeds - pressure ratings ■Single pumps ■Double and triple pumps ■Minimum allowable suction pressure *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "LSHT Torque Motor" is a compact hydraulic motor that excels in low-speed rotation with high torque. By adopting roller bearings, it demonstrates stable low-speed rotation. Depending on usage, a reduction gear may not be necessary. Additionally, even under overload conditions, it is less prone to damage due to the safety valve, and it is easy to change torque, speed, and direction as options. 【Features】 ■ Long lifespan (oil-cooled structure, high rigidity bearing structure) ■ Stable low-speed rotation (roller bearing adoption) ■ Compact and easy to install ■ No drain piping required (high-pressure shaft seal adopted) ■ High volumetric efficiency (roller bearing adoption) *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "LSHT Low-Speed, High-Torque Hydraulic Motor" is a compact, high-torque hydraulic motor that excels in low rotational speed. There is a constant oil flow in the spline section of the drive link, which is subjected to significant load inside the motor, providing cooling and flushing effects that contribute to a long lifespan. As a global standard, it is adopted in many industries, including construction machinery, special vehicles, forestry machinery, and conveyors. 【Features】 - A constant oil flow exists in the spline section of the drive link, which is subjected to significant load inside the motor, providing cooling and flushing effects that contribute to a long lifespan. - The use of a disc valve and valve seals reduces internal leakage, resulting in excellent performance characteristics at low speeds. - The adoption of high-pressure shaft seals eliminates the need for drain piping. *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

This catalog contains a comprehensive overview of the low-speed, high-torque hydraulic motor "LSHT Series." It includes numerous pieces of information, such as safety precautions and requests for safe usage, product handling instructions, and selection materials. Additionally, detailed information about each product is provided with images and diagrams, so please make use of it. 【Contents (partial)】 ■ For safe usage ■ Handling instructions ■ Selection materials ■ Important usage notes *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

This catalog contains information about the PVplus series variable piston pumps. It includes a general introduction to the products, technical data, order codes, pressure control, remote control, and a wealth of other information. Additionally, it features information on control accessories, external dimensions, pump component dimensions, through drives, and installation kits, so please make use of it. [Contents (partial)] ■ General introduction ■ Technical data ■ Order codes ■ Pressure control ■ Remote pressure control *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "PVplus Series" is a variable displacement axial piston pump with a rated pressure of 35 MPa and a maximum discharge volume of 360 cm³/rev. It is a swash plate type designed for open circuits with through drive for single and multi-pump configurations, featuring a compact design. With high pressure, high-speed rotation, low noise, and a rich variety of control methods, we can help you select the product that best suits your needs. Please feel free to consult us for short delivery projects. 【Features】 ■ Low noise ■ High response speed ■ High self-priming speed ■ Compact design *For more details, please download the PDF or feel free to contact us.

• Other pumps

The 'JEH/JEA' that we handle is a compact and wide variation clamp unit. Both hydraulic (7MPa) and pneumatic specifications are available in the same dimensions. With a new design, the overall length has been made compact, contributing to the miniaturization of fixtures. Additionally, we have adopted a magnetic proximity embedded switch that emphasizes ease of use, making it easy to confirm clamping and unclamping. 【Features】 ■ Hydraulic (7MPa) and pneumatic specifications available in the same dimensions ■ New design contributes to compact overall length and miniaturization of fixtures ■ Magnetic proximity embedded switch focused on ease of use, making clamping and unclamping confirmation easy ■ The rod cover and fixture surface seal utilize a newly adopted gasket method for simplicity and reliability *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

This document summarizes information related to fixtures and associated equipment, ranging from high-rigidity hydraulic clamp units to compact and versatile clamp lights that can be selected over a wide range. It includes a wealth of information such as the product lineup, product composition, factors for selecting clamp units, and explanations of clamp operations. Additionally, it features clamp force diagrams and selection materials for long arm usage limits, so please make use of it. 【Contents (partial)】 ■LINE UP ■Product Composition ■Factors for Selecting Clamp Units ■Explanation of Clamp Operations ■Selection Materials (Clamp Force Diagrams / Hydraulic (JEHS)) *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "35HU201" is a compact hydraulic unit with a rated pressure of 3.5 MPa and a discharge capacity of 1.3 ℓ/min (60Hz). It employs a special tooth profile (high-bosacroid) internal gear pump, and additionally reduces pulsation operating noise through an oil-submerged operating method. Moreover, pilot check valves and flow control valves are standardized. 【Features】 ■ Adoption of a special tooth profile (high-bosacroid) internal gear pump ■ Reduction of pulsation operating noise through oil-submerged operation ■ Standard equipment includes solenoid valves, relief valves, and pressure gauges ■ Standardization of pilot check valves and flow control valves *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "35HU204" is a compact hydraulic unit with a rated pressure of 3.5 MPa and a flow rate of 4.2 liters per minute (60 Hz). It standardizes components such as the pilot check valve, throttle check valve, and pressure reducing valve. Additionally, it comes standard with a relief valve and pressure gauge, and an oil cooler is also available as a standard option. 【Features】 ■ Standard equipped with a relief valve and pressure gauge ■ Standardized pilot check valve, throttle check valve, and pressure reducing valve ■ Oil cooler option is also standardized *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

We would like to introduce the compact hydraulic unit 'NHU210' handled by Fujikawa Denko Co., Ltd. Equipped with a top runner standard IE3 motor, it reduces power loss due to the piston pump, thereby lowering power consumption. Additionally, it comes standard with a variable flow function. Up to three valves can be installed, making the configuration of the control circuit easy. 【Features】 ■ Equipped with a top runner standard IE3 motor ■ Reduced power loss and lower power consumption due to the piston pump ■ Standard variable flow function ■ Standard drain cooler to keep oil temperature rise low ■ Up to three valves can be installed, making control circuit configuration easy *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "NHU220" is a compact hydraulic unit equipped with an IE3 motor that meets top runner standards. It comes standard with a variable flow function and a drain cooler, which helps keep the oil temperature rise low. Additionally, it can accommodate up to three valves, making the configuration of the control circuit easy. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Rated pressure: 7Mpa ■ Operating oil temperature range: +10 to +60℃ ■ Tank capacity: 18L ■ Suitable hydraulic oil: Equivalent to JIS K2213-2 type (Turbine oil ISO VG32) ■ Number of valve connections: 1 to 3 *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "Just Power System" has been newly introduced as a system consisting of a hydraulic unit, hydraulic cylinders, and flow control valves. All the components are elite products born from TAIYO's proven track record and high technical capabilities. With a wide variety of models available and various combinations, you can easily choose a system that perfectly fits your usage conditions at a low cost. 【Lineup】 ■35HU201 Series ■35HU204 Series ■NHU210 Series ■NHU220 Series *For more details, please download the PDF or feel free to contact us.

• valve

This document contains the handling instructions for the "Just Power System." We introduce a mounting method for the hydraulic unit that uses four holes at the lower edge of the tank (201 and 204 are Φ9, NHU2 is Φ12) for fixation. Additionally, we also provide information on piping methods, such as utilizing the ports on the end face of the manifold block for the actuator piping. [Contents (Excerpt)] ■ Mounting Method ■ Piping Method ■ Wiring Method ■ Operation ■ Cautions *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our motor-driven pump, "35HP201." The electric motor and internal gear pump are compactly set together. It features a special tooth profile (hypocycloid) internal gear pump. Additionally, the adoption of an oil-lubricated operation method reduces pulsation noise during operation. Please feel free to contact us when you need assistance. 【Specifications (Excerpt)】 ■ Rated pressure: 3.5MPa ■ Installation direction: Vertical only ■ Pump discharge rate ・50Hz: 1.1L/min ・60Hz: 1.3L/min *For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce our motorized pump '35HP204'. The relief valve and pressure gauge are standardized. The pilot check valve, throttle check valve, and pressure reducing valve are also standardized. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Rated pressure: 3.5MPa ■ Pump discharge capacity ・ 50Hz: 3.2L/min ・ 60Hz: 4.2L/min ■ Operating oil temperature range: +15 to +60℃ * For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce our small solenoid valve 'CA'. It can be used in small hydraulic units as well as in general industrial small machinery. It employs a wet solenoid. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 5MPa ■ Maximum switching frequency: 500 times/min ■ Rated flow rate: 2.5L/min ■ Allowable voltage range: Rated voltage ±10% ■ Operating oil temperature range: +15 to +60℃ *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our laminated flow control valve 'HFC2'. It allows flow control from 0 to 2.5 L/min at a differential pressure of 0.5 MPa. Additionally, it features temperature compensation due to its unique needle shape. Please feel free to contact us if you have any inquiries. 【Specifications (excerpt)】 ■ Maximum operating pressure: 5 MPa ■ Maximum flow rate: 4 L/min ■ Cracking pressure: 0.04 MPa ■ Operating temperature range: +15 to +60℃ ■ Weight: 0.2 kg *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our laminated pilot check valve 'HPC1'. It can be used for preventing descent due to the weight of hydraulic cylinders, among other applications. Additionally, it can be used with a solenoid valve stacked on it. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 5MPa ■ Maximum flow rate: 3L/min ■ Cracking pressure: 0.04MPa ■ Pilot pressure: 0.38 × load pressure + 0.04MPa ■ Operating temperature range: +15 to +60℃ *For more details, please download the PDF or feel free to contact us.

• valve

The "D1VW" is a solenoid valve that standardly employs a highly reliable rectifier with an AC solenoid. The mounting dimensions are ISO4401-03 (nominal size: 01). It comes standard with a lamp and surge absorber (DIN, conduit box). It is offered as a valve module along with Parker's extensive hydraulic control equipment. 【Lineup】 ■ Conduit box ■ DIN connector ■ Deutsch connector *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our laminated check valve 'MCVD'. It is used for preventing backflow in piping. Compliant with ISO standards (IS04401-03). Please feel free to contact us when you need it. 【Specifications (excerpt)】 ■ Maximum operating pressure: 25MPa ■ Maximum flow rate: 53L/min ■ Operating oil ・ Temperature range: -20 to +70℃ (provided there is no freezing) ・ Operating viscosity: 12 to 230mm²/s ・ Filtration: Recommended 18/16/13 ISO4406 *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our laminated throttle check valve 'MFCV'. It allows for speed control of the actuator and complies with ISO standards (IS04401-03). Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 25MPa ■ Maximum flow rate: 50L/min ■ Operating oil ・ Temperature range: -20 to +70℃ (provided there is no freezing) ・ Operating viscosity: 12 to 230mm²/s ・ Filtration: Recommended 18/16/13 ISO4406 *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our laminated pilot check valve 'MCVP'. It can be used for preventing descent due to the weight of hydraulic cylinders, among other applications. It complies with ISO standards (IS04401-03). Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 25MPa ■ Maximum flow rate: 50L/min ■ Operating oil ・Temperature range: -20 to +70℃ (provided there is no freezing) ・Viscosity: 12 to 230mm²/s ・Filtration: Recommended 18/16/13 ISO4406 *For more details, please download the PDF or feel free to contact us.

• valve

The "MPRV" is a laminated pressure reducing valve that can be set to a lower pressure than the main circuit for some circuits. Even if the pressure in the primary circuit fluctuates, the reduced secondary pressure maintains a constant pressure. It complies with ISO standards (IS04401-03). Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 25MPa ■ Maximum flow rate: 40L/min ■ Operating fluid ・Temperature range: -25 to +70℃ (provided there is no freezing) ・Viscosity: 12 to 230mm²/s ・Filtration: Recommended 18/16/13 ISO4406 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "MRV" is a laminated relief valve that adjusts the pressure on the primary side and sets the maximum allowable pressure for the piping. It can also be used as a safety valve in the circuit and complies with ISO standards. (IS04401-03) Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Maximum operating pressure: 25MPa ■ Maximum flow rate: 40L/min ■ Operating oil ・ Temperature range: -25 to +70℃ (provided there is no freezing) ・ Viscosity: 12 to 230mm²/s ・ Filtration: Recommended 18/16/13 ISO4406 * For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "8C" is an inline check valve that prevents backflow by being incorporated into a hydraulic circuit. The maximum operating pressure is 34.5 MPa, and five types are available according to the connection diameter and flow rate. Please feel free to contact us when you need assistance. 【Product Lineup】 ■8C200S ■8C400S ■8C600S ■8C800S ■8C1200S *For more details, please download the PDF or feel free to contact us.

• valve

The "8F" is an inline flow control valve with a maximum operating pressure of 34.5 MPa. With the step needle, fine adjustments at low flow rates can be made by using the first three turns of the knob. Additionally, by using the coloring as a reference, flow rate settings can be made in a short time. 【Lineup】 ■8F200S ■8F400S ■8F600S ■8F800S ■8F1200S *For more details, please download the PDF or feel free to contact us.

• valve

This document contains information on the ordering method, assembly sequence, and dimensional drawings of the solenoid valve "D1VW." It introduces the manifold body type, the stacking order of the stacked valves, and the valve types for manifold integration. Additionally, it includes dimension tables, the number of stacked valves, the length of mounting bolts, and part types. [Contents] ■ Ordering method for manifold valves (valve assembly shipment) ■ Assembly sequence for manifold valves (valve assembly shipment) ■ Dimensional drawings for manifold valves (valve assembly shipment) *For more details, please download the PDF or feel free to contact us.

• valve

The "RJC Series" is a rotary joint that allows for easy supply of oil and air to rotating bodies, and can be used under high pressure and high-speed rotation. The rotating part uses a metal seal method, providing exceptional durability. The rotational torque remains constant regardless of the operating pressure. Please feel free to contact us when you need assistance. 【Lineup】 ■RJC-061H ■RJC-062L ■RJH-062M ■RJC-122L ■RJH-122M *For more details, please download the PDF or feel free to contact us.

• joint

The "RJP-061L-RC4/6" is a rotary joint with a high lifespan and torque-free operation, thanks to its unique metal seal technology in the air section. The electrical section features a mercury-free contactless rotary connector, allowing direct connection to a uniwire transmission line. This enables easy multi-point control on rotating bodies. Additionally, we offer auxiliary units such as adapters and connection components. Please feel free to contact us when you need assistance. 【Features】 ■ A rotary joint that can transmit air and electricity in the rotating section ■ The air section has a high lifespan and is torque-free due to unique metal seal technology ■ The electrical section can be directly connected to a uniwire transmission line thanks to the built-in mercury-free contactless rotary connector ■ This allows for easy multi-point control on rotating bodies *For more details, please download the PDF or feel free to contact us.

• joint

This document is a dimensional drawing of the rotary joint "RJP series." It introduces the product's components, such as the rotating side flange, piping port, rotary connector, and wiring entrance, in a diagram. Please feel free to contact us when you need assistance. [Contents] ■ Dimensional drawing of rotary joint RJP-061L-RC4 ■ Dimensional drawing of rotary joint RJP-061L-RC6 *For more details, please download the PDF or feel free to contact us.

• joint

This document summarizes the specifications of each series of magnetic proximity switches. It includes a wide range of products, such as contact and non-contact types, switches designed for cutting oil resistance, high voltage and high current load driving, and heat-resistant environment applications. You can check the specifications, dimensional drawings, and handling instructions for each product. The document also describes the electrical circuits, connection methods, and precautions for each switch, making it a useful reference, so please take a moment to read it. [Featured Products (Partial)] ■ AX Type Switch ■ AZ Type Switch ■ T Type Switch ■ AX Type Switch (2-wire 1-light type) ■ AZ Type Switch (2-wire 1-light type) ■ T Type Switch (2-wire 1-light type) *For more details, please download the PDF or feel free to contact us.

• switch
• switch

This document is a technical resource that helps in the selection of various switches used in hydraulic and pneumatic equipment. It provides a wide range of information necessary for switch selection, from basic knowledge such as comparisons between contact and non-contact types, protection structures, and terminology explanations, to compatibility tables with cylinders and selection procedures. It is a useful reference, so please take a moment to read it. 【Contents (partial)】 ■ Switches for hydraulic equipment ■ Switches for pneumatic equipment ■ Switch compatibility table with hydraulic cylinders ■ Switch terminology explanations ■ About protection structures *For more details, please download the PDF or feel free to contact us.

• switch
• switch

We would like to introduce the "PARKER CARTRIDGE PRODUCTS" that we handle. We offer a wide range of products including Check Valves, Pressure Control Valves, Flow Control Valves, and Solenoid Valves. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■Check Valve ■Shuttle Valve ■Pressure Control Valve ■Logic Element Valve ■Flow Control Valve *For more details, please download the PDF or feel free to contact us.

• valve
• Valves and fittings

We would like to introduce our cartridge valve system, the "TCM Series." It is an essential component for compact hydraulic systems. This is Parker's cartridge system that achieves high pressure, large flow rates, and compactness. It is mainly used in hydraulic control systems for special vehicles, ships, amusement facilities, and more. 【Features】 ■ Achieves a compact hydraulic system ■ Enables safe and precise hydraulic circuit control ■ Minimal leakage even at high pressure ■ Maximum operating pressure of 42 MPa ■ Maximum flow rate of 500 L/min *For more details, please download the PDF or feel free to contact us.

• valve
• Valves and fittings

We would like to introduce our hydraulic proportional solenoid valves, the 'DFV Series DFB Type'. We offer three series: the "D1FB Series," which allows parameter settings via ProPxD software; the "D3FB Series," known for its high repeatability; and the "D*1FB Series," which accommodates large flow rates. Please feel free to contact us when you need assistance. 【Product Lineup】 ■D1FB ■D3FB ■D31FB ■D41FB ■D91FB ■D111FB *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "DFV Series" is a hydraulic servo valve/proportional valve available in two types: one equipped with a power amplifier (OBE) that has an electronic control device built into the main body, and a separate type that does not have it. To achieve advanced precision control, two types are available: one that features a sleeve mounted on the spool sliding part, and another that allows for large flow rates without using a sleeve. Parameter settings can be made using the ProPxD software with a dedicated amplifier (such as PWD00A-400). 【D＊FP (DF Plus) Servo Valve Features】 ■ High response speed achieved through unique voice coil drive technology ■ Low hysteresis of less than 0.05% (D＊1FP series: less than 0.1%) ■ Standardization of the power amplifier (OBE) equipped type ■ Supports flow rates of up to 3,000 L/min (D111FP) *For more details, please download the PDF or feel free to contact us.

• Servo

The "D3W Series" we handle is a hydraulic solenoid valve compatible with DIN connectors and conduit box wiring methods. The AC solenoid standardly features a highly reliable rectifier, and the mounting dimensions are ISO4401-05 (nominal size: 03). It comes standard with a lamp and surge absorber, and is offered as a valve module along with a comprehensive range of Parker hydraulic control equipment. 【Features】 ■ Wiring methods are DIN connectors and conduit boxes ■ AC solenoid standardly features a highly reliable rectifier ■ Mounting dimensions are ISO4401-05 (nominal size: 03) ■ Standardly equipped with a lamp and surge absorber ■ Offered as a valve module along with a comprehensive range of Parker hydraulic control equipment *For more details, please download the PDF or feel free to contact us.

• valve
• Valves and fittings
• Solenoid Actuators