カネキタ Product Lineup

"Bridge and Rat Hole Breaker" solves the "clogging" of various powders using Kanekita Corporation's unique technology, 'Air Pulse Generation Technology.' This technology has obtained patents in both Japan and the United States and features a newly developed magnetic valve that generates powerful air pulses instantaneously from compressed air without electrical control. As an air pulser, this technology is incorporated into products such as Palbras(R), Palnocker(R), and EZ Jr.(R) to inject strong air pulses into the hopper, providing fluidity to clogged powders, and is also applied to drive pistons that strike the outer walls of the hopper. 【Product Lineup】 ○ Palbras(R) PB-2 Series ○ Palbras EZ Jr.(R) ○ Palbras Mini ○ Palnocker(R) PK Series For more details, please contact us or download the catalog.

• Other powder equipment

The "Air Pulser" is a compact pulse air generator equipped with a magnetic valve. It stores compressed air in a chamber and releases it instantaneously, converting it into a powerful pulse flow. The body is available in aluminum and stainless steel, allowing for selection based on the usage environment and application. 【Features】 ■ Unique pulse air generation technology by Kanekita ■ Generates pulse air instantaneously from compressed air without electrical control ■ Pulse operation intervals are controlled by a speed controller ■ Generates even more powerful pulse air when combined with an air header ■ The body is available in aluminum and stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Paruburasu PB440" is an air blaster designed to eliminate bridges, rat holes, and wall adhesion that occur inside various hoppers, containers, and silos. It operates solely on compressed air, injecting powerful pulse air along the inner walls of the hopper. Since there is no impact noise when operating, it can run quietly. The disks and nozzles in contact with the material are made of stainless steel SUS304 as standard, allowing for long-term use. 【Features】 ■ Injects powerful pulse air along the inner walls of the hopper ■ Operates solely on compressed air ■ Low noise operation ■ Disks and nozzles in contact with the material are made of stainless steel SUS304 as standard ■ A wide variety of nozzles for pulse air injection *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Paruburas EZ Jr." is a device that injects pulse air into powder by inserting a nozzle into the top of a storage tank. The powerful air provides fluidity to the powder and relieves blockages. There is no need for drilling holes in the wall when installing it to a hopper, making it suitable for mobile or relatively small hoppers. 【Features】 ■ Compact and lightweight ■ Air pulser mechanism ■ Operates solely on compressed air ■ Air switching valve *For more details, please download the PDF or feel free to contact us.

• Other powder equipment

We would like to introduce our air pulser, the "Palbras PB4 Series." It operates at a supply pressure of 0.4 to 0.6 MPa and can be used with compressed air or inert gas as the driving source. The operating interval of the air pulser can be set from 1 to 60 seconds, allowing for flexible use in various applications. 【Product Composition】 ■ Disk (made of stainless steel) ■ Nozzle (made of stainless steel) ■ Air Pulser (made of aluminum/stainless steel) ■ Air Header (capacity: 500ml/1000ml/2000ml) ■ Speed Controller *For more details, please download the PDF or feel free to contact us.

• Other powder equipment

The "Paruburasu PB405 Long Pipe Type" is a device designed to solve blockages such as bridges and rat holes formed inside hoppers. A nozzle is installed facing inward from the top of the hopper, and powerful pulse air is injected from the tip. It operates simply by connecting a compressed air tube, without the need for electrical control, providing fluidity to the blockage and resolving the clog. 【Features】 ■ Generates powerful pulse air through the combination of an air pulser and air header ■ Operates solely on the supply of compressed air ■ Compact and easy to transport ■ Wide range of applications possible with optional parts ■ Can also be used for cleaning by blowing out hoppers and tanks with pulse air *For more details, please download the PDF or feel free to contact us.

• Other powder equipment

The "Paruburasumini" is a small air blaster designed to efficiently discharge various powders from a small hopper. It is designed using a unique pulse air generation technology and features a stainless steel SUS304 disk for long-term use. No electrical control is required, and the included speed controller allows for easy adjustment of the pulse interval. 【Features】 ■ Pulsed air is injected along the inner wall of the hopper ■ Standard use of stainless steel SUS304 disk ■ Operates solely on compressed air ■ Quiet operation *For more details, please download the PDF or feel free to contact us.

• Other powder equipment

We would like to introduce our "resin processing." By processing in a clean room with controlled temperature and humidity, we minimize the expansion caused by heat and moisture, which are characteristics of resin. It is possible to achieve dimensional accuracy equivalent to that of metal products. Please feel free to contact us when you need our services. 【Features】 ■ Work is performed in a clean room to reduce contamination from external foreign substances. ■ Maintaining a constant indoor temperature and performing constant-temperature cutting achieves high dimensional accuracy. ■ Various resin processing is possible, including fluoropolymer PTFE and PEEK. ■ Inspection, assembly, and packaging are also conducted in the clean room to supply high-purity products. *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce our "Composite Electrolytic Polishing" service. Composite polishing refers to the process of performing electrolytic polishing after precision polishing. This allows for achieving a smoother surface roughness and realizing a highly clean surface. Using our original automated polishing machine, we perform precision polishing and mirror polishing, followed by electrolytic polishing. Instead of the conventional dipping method, we design specialized tools that enable processing only the specific areas requested by our customers. [Target Parts] - Inner diameter of holes, angled holes, flat surfaces, etc. *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce the "cleaning" services we provide. We perform cleaning using pure water and ultra-pure water, removing not only visible dirt but also invisible contaminants and residues. This cleaning process eliminates particles and ionic substances to a level that does not pose a problem in fields such as electronics and precision machinery. By sharing and managing the cleaning recipes for each product in the QC process chart with our customers, we ensure cleanliness. 【Services Offered】 ■ Precision Cleaning ■ Pure Cleaning *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce the "passivation treatment" that our company conducts. A passivation film is an extremely thin and dense chromium oxide film formed on the surface by the combination of chromium and oxygen in stainless steel. By treating it after our composite electrolytic polishing, it is possible to form a more robust passivation film. 【Features】 ■ No dimensional variation, allowing for treatment in the final process ■ Ability to form a stronger passivation film *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce our company's "metal processing." We accommodate products that require high processing precision in a wide range of sizes and shapes. The materials we handle include various types of stainless steel and high alloys. Additionally, we can respond to everything from prototype development and one-off items to mass production and small lots of various types. 【Features】 ■ Processing is carried out using MC centers, NC lathes, etc. ■ General-purpose machines are used for machining large-diameter valve rods, among others. ■ We implement geometric tolerances and other specifications. ■ We also contribute to reducing manufacturing costs. ■ Capable of handling all types of cutting processing. *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce the "welding" that our company conducts. Laser welding has a high energy density, resulting in minimal distortion and thermal effects, allowing for fine beads and deep penetration. Our company owns multiple YAG and fiber welding machines, enabling us to cater to welding components that particularly emphasize precision and surface finish. 【Advantages of Fiber Laser Welding】 ■ Capable of microprocessing (precision welding) ■ Stable quality through the use of dedicated jigs (suitable for mass production) *For more details, please download the PDF or feel free to contact us.

• Processing Contract

"SUS316L-K material and KVA material" are ultra-clean austenitic stainless steels for semiconductor manufacturing equipment. Advanced melting technology has significantly reduced non-metallic inclusions and gas components in the steel. It meets the chemical composition of JIS G 4303 SUS316L. Please feel free to contact us when you need it. [Types] ■ Single Melt: SUS316L-K ■ Double Melt: SUS316L-KVA *For more details, please download the PDF or feel free to contact us.

• Processing Contract

We would like to introduce the "Powder Blockage Prevention Equipment" that we handle. This equipment solves problems such as bridges and rat holes that occur in storage hoppers, which reduce the discharge efficiency of bulk materials. It operates solely on compressed air, allowing for easy installation and quick operation during troubleshooting. 【Product Lineup (Partial)】 ■ Palbras PB405 ■ Palbras EZ Jr. ■ Palbras PB4 ■ Palbras PB440 ■ Palbras Mini ■ Palnocker PK *For more details, please download the PDF or feel free to contact us.

• Other powder equipment

Kanekita Co., Ltd. has a long history in metal processing, including stainless steel, and is a company that can significantly reduce the number of management processes. In addition to machining, we also possess facilities for material procurement, machine polishing, laser welding, electro-polishing, and precision cleaning. We are capable of pursuing products with higher precision and cleanliness. Please feel free to contact us when you need our services. 【Strengths of Kanekita】 ■ Integrated production system ■ Extensive range of machine tools ■ High-level polishing system ■ Equipped with clean rooms *For more details, please download the PDF or feel free to contact us.

• Processing Contract
• Other powder equipment

Kanekita Co., Ltd. is a company that primarily handles precision machined products. For semiconductor manufacturing equipment parts that require high machining precision, we manufacture and supply various fittings, including gas gasket seal joints made of SUS316L with high corrosion resistance, as well as valve bodies. In addition, we offer a wide range of products including polished products, YAG laser welded products, and resin processed products. We have a track record of precision welding with stainless steel processed products in our YAG laser welding products. [Examples of Products Handled] ■ Precision machined products ■ Polished products ■ YAG laser welded products ■ Resin processed products ■ Product design and manufacturing - integrated production *For more details, please refer to our catalog or feel free to contact us.

• Processing Contract

We would like to introduce the equipment we possess. We continuously introduce advanced processing machines to achieve a reduction in manufacturing costs. Please feel free to contact us when you need our services. 【Equipment Owned (Partial)】 ■ NC Lathes: 35 units ■ NC Lathes with Auto Bar Feeders: 8 units ■ NC Lathes with Self Loaders: 3 units ■ Multi-tasking Machines: 8 units ■ Vertical Machining Centers (3-axis, 4-axis, 5-axis): 15 units ■ Horizontal Machining Centers (4-axis): 5 units *For more details, please download the PDF or feel free to contact us.

• Processing Contract