マコメ研究所 (MACOME) List of Products and Services

This is an 8-bit output type address sensor (spot mark reader) that identifies the position of an unmanned transport vehicle. It detects address magnets with arbitrary information (0-255) written on them and performs vehicle control (branching, stopping, accelerating, decelerating, etc.) based on the current location information. Since it reads as an absolute value, it is less likely to skip addresses. 【Main Features】 - The address code can identify 256 codes in 8-bit binary. - Adopts a mobile reading method, allowing reading while the unmanned transport vehicle (AGV) is in motion. - Available with N-pole 'SMR-2352H2-N' and S-pole 'SMR-2352H2-S'. - The spot mark reader equipped with reading timing output reads information when positioned directly above the address magnet plate during movement. - The address magnet plate (address marker) can be selected from yellow and green laminates. - Easily usable when a large capacity RFID IC chip is not required. - Suitable for environments where barcodes cannot be used due to dust and other influences. For approximate model numbers like SMR-2352H RB, please inquire. *For more details, please contact us.*

This is a 6-bit output type spot marker reader that identifies the position of an unmanned transport vehicle. It detects address magnets with arbitrary information (0 to 63) written on them and performs vehicle control (branching, stopping, accelerating, decelerating, etc.) based on the current location information. Since it uses binary code parallel output, signal processing is also easy. Because it uses absolute addresses, there is no skipping like in a count-up method. 【Main Features】 - Designed for unmanned transport vehicles (AGVs), it adopts a mobile reading method. - The spot marker reader and address magnet board are non-contact types. It is equipped with a clock signal to read when the spot marker reader is positioned directly above the address magnet board while in motion. - Compared to the higher model 'SMR-2352H2', the main body size has been reduced by approximately 60% in width. *For more details, please download the catalog or contact us.

This is a 2ch switching type (individual polarity) address sensor that is used in combination with the dedicated address magnet plate 'SMG-100'. It has two output lines, and depending on the polarity of the magnet as the sensor passes over the magnet plate, either the N or S pole output line will turn ON. It is suitable for simple vehicle control such as acceleration, deceleration, and braking of automated guided vehicles (AGVs), providing stable guidance that is not affected by dust or debris. It is very compact, allowing for high flexibility when integrating into AGVs and similar applications. 【Main Features】 ■ Two types: Normal Open 'SMR-100C' and Normal Close 'SMR-100C-P' ■ Completely non-contact type with a detection range of 15 to 40 mm ■ Capable of polarity discrimination, not just the presence of a magnet, but also whether there is an "N pole (or S pole)" ■ Sensitivity adjusted to match the dedicated address magnet plates 'SMG-100 (N)' and 'SMG-100 (S)' ■ There is also a 1-bit information type (detecting either N or S pole) 'SMR-50B' *For more details, please download the catalog or contact us.

The GS-315 type has top-class features among all guide sensors in history. It enables stable induction that is not affected by dust, dirt, etc., to detect the magnetism from the "guide tape." Since it uses a unique detection element developed by Makome Research Institute, it can maintain a significant operational distance from the "guide tape." The waterproof GS-515 has also joined the lineup!! *For more details, please contact us or download the PDF materials. *Samples are available for loan!

Makome Research Institute is releasing publicly available CAD data. dxf (DXF), igs (IGS), stp (STP) 3D data will be added and released as needed. If it is not listed, we will respond on a case-by-case basis, so please let us know. We will create and provide it as quickly as possible. (Please note that some products may not be available for specific users.) While the CAD data is created with the utmost care, we make no guarantees regarding its content. In the event of any omissions or errors in the CAD data information, Makome Research Institute cannot provide any guarantees. *For more details, please contact us.