応用電機 List of Products and Services

At Applied Electric, we specialize in non-standard small-lot production and are constantly handling and delivering a wide variety of products, totaling over a thousand types. The "Power Conditioner" is capable of converting direct current from fuel cells and solar cells into alternating current. Additionally, we are working to promote eco-friendliness with systems that measure the conversion efficiency of solar cells and systems that inspect the performance of lithium-ion battery packs installed in electric vehicles. [Features] ■ Non-standard small-lot production ■ Power conversion from direct current to alternating current from fuel cells and solar cells ■ Contribution to the promotion of eco-friendliness *For more details, please refer to the PDF document or feel free to contact us.

• Power Monitoring Equipment
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

At Applied Electric, we specialize in non-standard small-lot production and are constantly handling and delivering a wide range of products, numbering in the thousands. We assemble large "information display boards" tailored to customer specifications using modules composed of single-color and three-color LED dot matrices. These are installed on roads, in stadiums, at dams, and along rivers, displaying necessary information using text, symbols, and images. 【Features】 ■ Non-standard small-lot production ■ Use of modules composed of single-color and three-color LED dot matrices ■ Assembled according to customer specifications ■ Installed on roads, in stadiums, at dams, and along rivers ■ Displays necessary information using text, symbols, and images *For more details, please refer to the PDF materials or feel free to contact us.

• Indicator Light
• Display
• others

At Applied Electric, we specialize in non-standard small-lot production and are constantly handling and delivering a wide variety of products, numbering in the thousands. In response to customer requests, we develop and design controllers that serve as the core of inspection and control devices, using suitable CPUs and FPGAs. [Development Examples] ■ CPU: H8, SH-2, SH-2A, SH-3, SH-4, SH-4A, RX, i.MX3x, ARM, DSP ■ Communication: USB2.0, USB3.0, 1G/100/10baseT, RocketIO, MIPI ■ Bus: VME, CompactPCI, PCI, PCIExpress *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Circuit board design and manufacturing

At Applied Electric, we specialize in non-standard small-lot production and are constantly handling and delivering a wide range of products, totaling over a thousand types. The "256-point source measurement unit board" allows for simultaneous application of 8-point current/voltage with 256 connection points, as well as simultaneous measurement of 4-point current/voltage. We respond to various requests, from small to large scale, utilizing measurement technology from micro-signal measurement to power systems, dedicated board development leveraging digital control technology and communication technology, and systems that combine embedded CPUs, firmware, and PC software. 【Features】 ■ Non-standard small-lot production ■ Simultaneous application of 8-point current/voltage and simultaneous measurement of 4-point current/voltage with 256 connection points ■ Dedicated board development leveraging communication technology ■ Systems combining embedded CPUs, firmware, and PC software ■ Responding to various requests from small to large scale *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Circuit board design and manufacturing

At Applied Electric, we specialize in non-standard small-lot production and consistently handle a wide range of products, totaling over a thousand types. Leveraging our experience in various fields such as secondary batteries, electronic components, semiconductors, liquid crystals, solar cells, automobiles, medical devices, and food, we propose automation and labor-saving solutions tailored to our customers' needs, including conveyors, assembly machines, and inspection machines. Additionally, we design the electrical circuits, enclosures, and sequence programs for control panels to meet specific requirements. 【Features】 ■ Non-standard small-lot production ■ Proposals for automation and labor-saving solutions tailored to customer needs ■ Design of electrical circuits, enclosures, and sequence programs for control panels according to specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Control Panel

At Applied Electric, we specialize in non-standard small-lot production and are constantly handling and delivering a wide range of products, totaling over a thousand types. Our "Power Semiconductor Testing Equipment" is developed in-house based on customer specifications, including large current units, high voltage units, bus bars, gate drive circuits, and measurement software. We provide solutions related to all types of measurements, including AC measurement, DC measurement, and load short-circuit testing. 【Features】 ■ Non-standard small-lot production ■ In-house development based on customer specifications ■ Solutions related to all types of measurements *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Semiconductor inspection/test equipment

The "PCI-Q128" is a CompactPCI board that features 128 isolated digital outputs in a 6U-4HP size. It uses reliable PCR connectors from Honda Tsushin Kogyo. Additionally, it is equipped with isolated power supplies for every 16 points, allowing for digital control in systems with multiple power systems. 【Features】 ■ Capable of outputting 128 isolated points in just one slot of a 6U CompactPCI rack ■ Output strobe signals can also be configured ■ Equipped with WDT and EMO (emergency stop) inputs *For more details, please refer to the catalog or feel free to contact us.

• Instrumentation and Control Systems

The "PCI-SSMU" is a measurement board that consolidates the source and measurement necessary for measuring multi-pin devices into a single PCI6U (12HP) unit. It is ideal for use as an open-short checker for multi-pin DUTs and a high-precision in-circuit checker for assembled printed circuit boards, enabling faster, smaller, and more cost-effective measurement systems. 【Features】 ■ Supports connection to up to 256 measurement points ■ No external MUX board required ■ Current (FI) / Voltage (FV) can be applied simultaneously to up to 8 points ■ Measurement (MI/MV) can be captured simultaneously for up to 4 points *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "PCI-PGIO" is an optical isolation digital IO board that demonstrates its power in environments where noise cannot be eliminated even with phototransistor isolation. Equipped with the high-performance FPGA Vertex-5 from Xilinx, it can flexibly accommodate the construction of measurement systems that require high-level isolation control. 【Features】 ■ Ideal for measurements using high-voltage equipment and for measuring high-voltage components ■ Implemented with Xilinx Vertex5 ■ Capable of integrating a pattern generator with 10nsec resolution ■ Capable of integrating high-speed optical communication *For more details, please refer to the catalog or feel free to contact us.

• Instrumentation and Control Systems

The "PCI-FEB" is a measurement board that consolidates the source, measure, IO, and communication control necessary for small-scale measurement systems into a CompactPCI 6U (8HP) format. It is ideal for measuring Ic, IGBT, FET, and bipolar transistors, as well as for open/short checks of assembled circuit boards, making it a product that achieves miniaturization and cost reduction of measurement systems. 【Features】 ■ Power control via RS-232C ■ Sampling possible with a single PCI-FEB ■ Multiple units can be used for parallel measurements *For more details, please contact us or download the catalog.

• Other measurement and measuring equipment

Applied Electric Co., Ltd. is a company primarily engaged in the assembly of electronic printed circuit boards and the design and manufacturing of various industrial electronic devices. With extensive experience and achievements, we provide optimal solutions for every stage of manufacturing. By in-house production, we achieve short delivery times and high quality, and we systematize measurement and mechatronics, so please feel free to consult with us. 【Business Content】 ■ Development, design, and manufacturing of measurement and measuring instruments, mechatronic devices, and medical devices utilizing electronics and optics. *For more details, please refer to our catalog or feel free to contact us.

• Contract manufacturing
• Mechanical Design
• Prototype Services

This is a light source device used for performance testing (inspection) of semiconductor image sensors such as CCD and CMOS types, area sensors, linear sensors, and near-infrared sensors. The light source device is used in conjunction with test systems for pre-manufacturing tests (electrical characteristic tests of wafers), post-manufacturing tests (electrical function tests of packages), and R&D evaluation tests. It is compatible with various test systems, supports 300mm wafers, is suitable for low illumination, and excels in color temperature management. 【Features】 ■ Light source device used for performance testing (inspection) of semiconductors → CCD and CMOS type image sensors, area sensors, linear sensors, near-infrared sensors, etc. ■ Used in connection with test system devices → Pre-manufacturing tests (electrical characteristic tests of wafers) → Post-manufacturing tests (electrical function tests of packages) → R&D evaluation tests, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Semiconductor inspection/test equipment

The high-speed serial transmission system can be constructed using LVDS, enabling systems with low-speed (Mbps) to high-bandwidth (Gbps) serial buses. It is designed for applications that require high-speed data communication through a distributed control system. As an example of development, there is a system that realizes a high-speed serial data bus (up to 1.25Gbps) using Xilinx's FPGA (such as Virtex5). This system consists of one master board and seven slave boards that communicate data rapidly through a backplane, with PowerPC CPUs adopted for each board and Linux as the operating system. 【Features】 ■ Uses LVDS → Capable of constructing systems with low-speed (Mbps) to high-bandwidth (Gbps) serial buses ■ Designed for applications requiring high-speed data communication through a distributed control system *For more details, please refer to the PDF document or feel free to contact us.

• Image Processing Equipment
• Other information systems

The vein authentication device is a security system that captures the unique vascular patterns of an individual's fingers using an infrared CCD camera, and completes personal authentication through special image processing, feature point extraction, and feature point matching. It achieves high-speed image processing through FPGA. 【Features】 ■ Captures the vascular patterns of fingers using an infrared CCD camera ■ Special image processing and feature point extraction ■ Feature point matching ■ A security system that completes personal authentication ■ High-speed image processing achieved through FPGA *For more details, please refer to the PDF document or feel free to contact us.

• Image Processing Equipment
• Personal authentication

The ultrasonic bone density measurement device "LD-100" detects two waves (high-speed wave and low-speed wave) generated when ultrasonic waves are emitted to the radius bone at the wrist, and measures bone density and bone thickness. When ultrasonic waves are applied to the trabecular bone, a unique phenomenon occurs where the waves split into two: the "high-speed wave" that propagates depending on the bone trabeculae, and the "low-speed wave" that propagates depending on the viscoelastic bone marrow. This device enables individual analysis of the propagation characteristics such as sound speed and attenuation rate of each wave through the development of a unique calculation system and the incorporation of highly sensitive sensors, allowing for quantitative evaluation of bone density and bone thickness. Additionally, it measures the elasticity of trabecular bone, which is gaining attention as an indicator of bone quality, thereby measuring the strength of the bone in a composite manner in addition to bone density. 【Features】 ■ A device that measures bone density and bone thickness 　→ Detects the two waves (high-speed wave and low-speed wave) generated when ultrasonic waves are emitted to the radius bone at the wrist ■ Individual analysis of propagation characteristics such as sound speed and attenuation rate for each wave 　→ "High-speed wave" that propagates depending on the bone trabeculae 　→ "Low-speed wave" that propagates depending on the viscoelastic bone marrow *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

The solar cell evaluation device is a device that can measure the characteristics of individual solar cells without destroying the solar cell module in a non-contact manner. Traditionally, the evaluation of solar cells was conducted by irradiating the solar cells with simulated sunlight (solar simulator) and measuring the electrical characteristics produced. While this method allows for understanding the characteristics of the entire solar cell module, it does not provide information on the characteristics of each cell that makes up the module. This device utilizes the electroluminescence (EL) effect of semiconductors, enabling the high-speed measurement of electrical characteristics for each cell. The production volume of solar cells continues to grow at a high rate of 30-40% annually, increasing expectations for this device. 【Features】 - Measures the characteristics of solar cell cells without destroying the solar cell module - Non-contact evaluation device - Utilizes the electroluminescence (EL) effect of semiconductors - Capable of high-speed measurement of electrical characteristics for each cell *For more details, please refer to the PDF document or feel free to contact us.

• Mechanical Design
• Evaluation Board
• Image Processing Equipment

In addition to applying and measuring the specified voltage and current values, the adoption of DDS technology allows for the control of the waveform and application time of the power supply's rise and fall as transient response patterns, as well as the measurement of the current flowing at that time and the voltage generated. The miniaturization of peripheral circuits is achieved through FPGA and microcontroller control. This power supply is primarily used in combination with semiconductor testing equipment. 【Features】 ■ Application and measurement of specified voltage and current values ■ Adoption of DDS technology ■ Control of the waveform and application time of the power supply's rise and fall as transient response patterns ■ Measurement of the current flowing at that time and the voltage generated ■ Miniaturization of peripheral circuits achieved through FPGA and microcontroller control ■ This power supply is primarily used in combination with semiconductor testing equipment *For more details, please refer to the PDF document or feel free to contact us.

• Mechanical Design
• Power Supplies

We design and manufacture handlers for various devices (TSOP, BGA, QFP, CSP) and electronic components according to customer specifications. We offer technologies for processing multiple units, high-speed indexing, and environments ranging from room temperature to high temperature, as well as proposals tailored to applications from gravity drop transport methods to horizontal transport methods. As a low-cost dedicated machine, we contribute to the high efficiency of semiconductor and electronic component manufacturing processes. 【Features】 ■ Designed and manufactured according to customer specifications 　→ Handlers for various devices (TSOP, BGA, QFP, CSP) and electronic components ■ Processing of multiple units ■ High-speed indexing ■ Technologies for room temperature and high temperature environments ■ Proposals tailored to applications from gravity drop transport methods to horizontal transport methods ■ Contributes to the high efficiency of semiconductor and electronic component manufacturing processes as a low-cost dedicated machine *For more details, please refer to the PDF materials or feel free to contact us.

• Other semiconductors
• Semiconductor inspection/test equipment
• Mechanical Design

As represented by logic devices, semiconductor technology is evolving at an incredible pace, with trends toward higher speeds, multifunctionality, and an increase in the number of pins. We design and manufacture semiconductor testing equipment that measures the functions of devices based on customer specifications as dedicated machines. We can accommodate large-capacity pattern memory considering long test patterns, high timing accuracy, high-speed function testing at a test frequency of 100MHz, support for 512-pin multi-pin configurations, and significantly improved cost performance for simultaneous measurements of multiple devices. 【Features】 ■ Designed and manufactured as dedicated machines based on customer specifications ■ Equipped with large-capacity pattern memory considering long test patterns ■ High timing accuracy ■ High-speed function testing at a test frequency of 100MHz ■ Support for 512-pin multi-pin configurations ■ Capable of simultaneous measurements of multiple devices to significantly improve cost performance *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Semiconductor inspection/test equipment

For 40 years, we have continued to meet customer needs and have been nurtured by them. We are dedicated to non-standard, small-lot production, focusing primarily on industrial measurement and control equipment, and we handle a wide range of products, totaling over a thousand types. In "Measurement and Control Equipment," we work on inspection devices for electronic components and semiconductor parts, as well as various interfaces and controllers incorporating microcontrollers and FPGAs. In "Power Supplies," we handle high-precision programmable voltage and current sources, as well as low-noise power supplies suitable for measurement systems. In "Information and Image Processing Equipment," we develop high-speed processing units for feature point extraction and matching on digitally converted image signals, as well as systems for centralized management of that information using networks. In "Mechatronics Equipment," we focus on labor-saving and automation equipment tailored to the various needs of the electronic components and semiconductor industries, incorporating measurement and image processing. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Power Supplies
• Other image-related equipment

In the WORK FLOW of circuit board design and implementation, we produce high-density boards in small lots. From circuit design to board implementation and power adjustment, we deliver designs and manufacturing starting from just one piece. To ensure stable quality in any situation and deliver within a short lead time, we have internalized the design and manufacturing processes of printed circuit boards and carry out efficient production. Additionally, we can take on any process, whether it be circuit design, artwork design, or component procurement. We have extensive design, implementation experience, and know-how, ranging from high-speed signal and high-density implementation boards to large multilayer boards for inspection equipment. For more details, please contact us or refer to our catalog.

• Circuit board design and manufacturing
• Circuit Board Inspection Equipment
• Contract manufacturing

Applied Electric Co., Ltd. is engaged in the implementation of electronic printed circuit boards and the production of various industrial electronic devices as a DMS (Design Contract) and EMS (Manufacturing Contract) company. The experience and achievements cultivated in small-lot, diverse production enable us to establish the best production system and provide satisfaction to our customers. We internalize key processes from design to parts procurement, logistics, sheet metal and machining, printed circuit board assembly, assembly, and inspection within our group, achieving short delivery times and high quality. For more details, please contact us or refer to our catalog.

• Mechanical Design
• Contract manufacturing
• Processing Contract

We achieve miniaturization and cost reduction of measurement systems. 【Features】 ○ The source, measure, IO, and communication control necessary for small-scale measurement systems are integrated into CompactPCI 6U (8HP). ○ Path setting → Power control via RS-232C → Applying current and voltage to the DUT → Measurement/sampling can be performed with a single PCI-FEB. ○ Parallel measurements are also possible by using multiple units. - For more details, please download the catalog or contact us.

• Voltage Meter

We realize the acceleration, miniaturization, and cost reduction of measurement systems. 【Features】 ○ The source and measure necessary for measuring multi-pin devices are integrated into a single PCI 6U (12HP) board. ○ It can connect to up to 256 measurement points, eliminating the need for external MUX boards. ○ Current (FI) / Voltage (FV) can be applied simultaneously to up to 8 points. ○ Measurement (MI/MV) can be simultaneously captured for up to 4 points. ・For more details, please download the catalog or contact us.

• Voltage Meter

Digital control is also possible in systems with multiple power supply systems. 【Features】 ○ This is a CompactPCI board equipped with 128 isolated digital outputs in a U-4HP size. ○ It uses reliable PCR connectors manufactured by Honda Communication Industry. ○ It can output 128 isolated points in just one slot of a 6U CompactPCI rack, and output strobe signals can also be configured. ○ It is also equipped with WDT and EMO (emergency stop) inputs. - For more details, please download the catalog or contact us.

• Voltage Meter

Equipped with the high-performance FPGA Vertex-5 from Xilinx, it can flexibly accommodate the construction of measurement systems that require high-level isolation control. 【Features】 ○ Equipped with 13 optical output devices and 5 optical input devices from Avago Technologies. ○ Demonstrates its power in environments where noise cannot be eliminated even with phototransistor isolation. ○ Ideal for measurement applications using high-voltage equipment and high-voltage devices (such as IGBT, MOSFET, SiC power semiconductors). ○ Implements Xilinx's Vertex-5, allowing for the integration of a pattern generator with 10nsec resolution and high-speed optical communication. - For more details, please download the catalog or contact us.

• Voltage Meter

The elasticity of trabecular bone, which is attracting attention as an indicator of bone quality, is also measured, allowing for a comprehensive assessment of bone strength in addition to bone density. 【Features】 ○ This device detects the two waves (high-speed wave and low-speed wave) generated when ultrasound is applied to the radius bone in the wrist, measuring bone density and bone thickness. ○ By developing a unique calculation system and incorporating highly sensitive sensors, it enables individual analysis of the propagation characteristics such as sound speed and attenuation rate of each wave, allowing for quantitative evaluation of bone density and thickness. ○ With positioning via mapping, it automatically calculates the appropriate measurement location based on the shape of the bone. ○ Measuring at the wrist eliminates the inconvenience of having to remove socks, which is required for heel measurements (traditional ultrasound method). - For more details, please download the catalog or contact us.

• others

The 35030CM can easily measure the power generation characteristics of solar cell arrays and solar cell modules. A series of processes including data measurement, processing, display, and recording can be covered by this compact device. * Measurement Range 0-350V 30A, 0-50V 10A * Measurement Items Open-circuit voltage, short-circuit current, maximum output, maximum output operating voltage, maximum output operating current, solar irradiance, temperature, curve factor, I-V curve * Display Functions Measurement items, I-V curve (corrected), I-V curve (uncorrected), P-V curve * Data Processing Conversion to standard conditions (in accordance with JIS-8913) Accumulation of measurement data (equivalent to 10 items) Data communication to a computer (RS-232C)

• Testing Equipment and Devices
• Electrical Instruments/Electrometers

OYO104 is a CPU board that compactly integrates a high-performance CPU (SH-3 + DSP) and the necessary surrounding functions (100mm × 80mm). * Equipped with a high-performance RISC module chip (HJ93D2010BP) * High-speed operation with CPU clock at 133MHz and SDRAM at 66MHz * SDRAM built into the RISC chip module * Eight status LEDs and eight status switches included * Program download to onboard Flash ROM included * Supports debugging via JTAG and AUD ports * Programming development languages (C and assembler) are available for use

• Other PCs and OA equipment

OYO105 is a CPU board that compactly integrates a high-performance CPU (SH-4) and the necessary surrounding functions (100mm x 80mm). * Equipped with a high-performance RISC module chip (HJ945010BP) * High-speed operation with a CPU clock of 200MHz and SDRAM of 100MHz * SDRAM built into the RISC chip module * Eight status LEDs and eight status switches included * Downloadable program to onboard Flash ROM * Supports debugging via a JTAG port for debugging * Programming development languages (C and assembler) are available for use

• Other PCs and OA equipment