ノヴァエレクトロニクス List of Products and Services

The MC8543PeL is a Low Profile compatible motion control board that can be mounted in slim-type desktop computers. It is equipped with the high-performance 4-axis motor control IC MCX514, allowing independent positioning control or speed control of 4-axis servo motors or stepping motors with a single board. Similar to the MC8541P and MC8541Pe, it features interpolation functions, including 2-axis/3-axis linear interpolation, arc interpolation, bit pattern interpolation, as well as 4-axis linear interpolation, 4-axis bit pattern interpolation, and helical interpolation.

• Other electronic parts

The "MCX312" is an IC that can control servo motors and stepping motors with 2-axis pulse input on a single chip. It allows for independent positioning control and speed control for each axis. It can perform 2-axis linear interpolation, circular interpolation, and bit pattern interpolation (interpolation based on bit data from the CPU). Additionally, this product can be connected with multiple chips to perform multi-axis linear interpolation. 【Features】 ■ 2-axis circular/linear/continuous interpolation ■ Parabolic S-curve/trapezoidal acceleration and deceleration drive ■ Automatic deceleration for asymmetric trapezoidal acceleration and deceleration ■ Built-in integrative filter for input signals ■ Multi-axis linear interpolation using multiple chips, etc. *For more details, please download the PDF or contact us.

• Other semiconductors

The "MC8043Pe" is a circuit board compatible with PCI Express×1, equipped with the 4-axis motor control IC "MCX314As" featuring interpolation functionality. With a single board, you can independently control the positioning or speed of 4-axis servo motors or stepping motors. Additionally, you can select any 2 or 3 axes out of the 4 axes to perform 2-axis/3-axis linear interpolation, CW/CCW circular interpolation, and 2-axis/3-axis bit pattern interpolation (interpolation based on bit data from the CPU). 【Features】 ■ Arc/linear interpolation functionality ■ Capable of high-speed drive ■ Smooth drive with S-curve acceleration and deceleration ■ Can be replaced with MC8043P *For more details, please download the PDF or contact us.

• Other electronic parts

The "MC8541P" supports the PCI bus, while the "MC8541Pe" supports PCI-Express ×1, and is a circuit board equipped with the 4-axis motor control IC "MCX514" that features interpolation functionality. With a single board, you can independently control the positioning or speed of 4-axis servo motors or stepping motors. The interpolation functionality has been enhanced compared to previous models, allowing for linear interpolation of up to 4 axes. It also includes CW/CCW arc interpolation, bit pattern interpolation for 2 to 4 axes, and CW/CCW helical interpolation. 【Features】 ■ Speed range free ■ Helical interpolation ■ 8-stage pre-buffer for continuous interpolation ■ Diverse interpolation functions *For more details, please download the PDF or contact us.

• Other electronic parts

The "MC8581P" supports PCI bus, while the "MC8581Pe" supports PCI-Express ×1. It is a circuit board equipped with two interpolation function 4-axis motor control ICs, "MCX514." Each unit can independently control the positioning or speed of 8-axis servo motors or stepping motors. The interpolation function has been enhanced compared to previous models, allowing for linear interpolation of up to 8 axes. It also features CW/CCW arc interpolation, 2 to 4-axis bit pattern interpolation, and CW/CCW helical interpolation. 【Features】 ■ Maximum 8-axis linear interpolation ■ Simultaneous operation of two interpolations ■ Helical interpolation ■ Speed range free ■ 8-stage pre-buffer for continuous interpolation *For more details, please download the PDF or contact us.

• Printed Circuit Board
• Other electronic parts

The "MCX512" is a 2-axis motion control IC that connects to a higher-level CPU via an 8-bit, 16-bit bus, and I2C serial interface bus, allowing for independent positioning control or speed control of servo motors and stepping motors on each axis. It can perform 2-axis linear interpolation, arc interpolation, bit pattern interpolation, and continuous interpolation. Additionally, this IC eliminates the need for speed ratio (range) settings, enabling output of drive speeds from 1pps to a maximum of 8Mpps in 1pps increments. 【Features】 ■ Various interpolation functions (2-axis linear interpolation, CW/CCW arc interpolation, bit pattern interpolation) ■ Parabolic S-curve/trapezoidal acceleration and deceleration drive ■ Automatic deceleration for asymmetric trapezoidal acceleration and deceleration ■ Synchronous operation with 4 sets for each axis ■ Automatic origin return function, etc. *For more details, please download the PDF or contact us.

• Other semiconductors

The "MC8022P/MC8042P" is a PCI bus-compatible circuit board equipped with the general-purpose 4-axis motor control IC "MCX304." With a single board, you can independently control the positioning or speed of 2-axis/4-axis servo motors or stepping motors. 【Features】 ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration ■ Common device driver (can be used in a mixed configuration) ■ Evaluation tools (easy operation confirmation) *For more details, please download the PDF or contact us.

• Printed Circuit Board
• Other electronic parts

The "MCX302" is an IC that can control the positioning and speed of servo motors and stepping motors with a 2-axis pulse input. It also includes features such as automatic origin return. Please feel free to contact us if you have any requests. 【Overview】 ■ Parabolic S-curve/trapezoidal acceleration and deceleration drive ■ Automatic deceleration for asymmetric trapezoidal acceleration and deceleration ■ Built-in integrative filter for input signals ■ Maximum drive speed: 4Mpps ■ Package: 100-pin QFP ■ Pin compatible with MCX312, etc. *For more details, please download the PDF or contact us.

• Other semiconductors
• controller
• Other electronic parts

The "MCX304" is an IC that can control servo motors and stepping motors with 4-axis pulse input in a single chip. It allows for independent positioning control and speed control for each axis. Additionally, it is equipped with functions such as automatic origin return. 【Overview】 ■ Parabolic S-curve / trapezoidal acceleration and deceleration drive ■ Automatic deceleration for asymmetric trapezoidal acceleration and deceleration ■ Automatic origin return ■ Built-in integrative filter for input signals ■ Maximum drive speed: 4Mpps ■ Package: 100-pin QFP *For more details, please download the PDF or contact us.

• Other semiconductors
• controller

The "MC8082Pe" is a circuit board compatible with PCI Express ×1 that is equipped with two general-purpose 4-axis motor control ICs, "MCX304." With one board, you can independently control the positioning or speed of 8-axis servo motors or stepping motors. It can also replace the PCI bus compatible board "MC8082P." 【Features】 ■ Independent control of 8 axes ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration ■ Can replace the MC8082P *For more details, please download the PDF or contact us.

• Printed Circuit Board
• Other semiconductors

The "MCX314As/AL" is an IC that can control servo motors and stepping motors with 4-axis pulse input using a single chip. It allows for independent positioning control and speed control for each axis. Additionally, it can perform linear interpolation, circular interpolation, bit pattern interpolation, and continuous interpolation by selecting any 2 or 3 axes out of the 4 axes. 【Power Supply Voltage】 ■MCX314As: 5V version ■MCX314AL: 3.3V version *For more details, please download the PDF or contact us.

• Dedicated IC
• Other process controls

The MC8581P is a PCI bus-compatible circuit board equipped with two 4-axis motor control ICs with interpolation function, "MCX514." It can independently control the positioning or speed of 8-axis servo motors or stepping motors on a single board.

• controller

The MC8541P is a PCI bus-compatible circuit board equipped with the "MCX514" motor control IC with interpolation functionality. It can independently control the positioning or speed of four-axis servo motors or stepping motors on a single board.

• controller

The MD5130D is a single-axis, and the MD5230D is a dual-axis bipolar pentagon type motion controller integrated with a driver for 5-phase stepping motors. The built-in EEPROM can register operating parameters and user programs with a maximum of 1000 steps for each axis. The software "MD Operation Tool" is included for editing and registering configuration data and user programs. 【Features】 ○ User program function ○ Rich acceleration and deceleration drive modes ○ Stall detection function ○ Microstepping ○ Low vibration operation For more details, please contact us or download the catalog.

• controller

The MCX514 is a four-axis motion control IC that connects to a higher-level CPU via an 8-bit, 16-bit bus, and I2C serial interface bus, allowing for independent positioning control or speed control of pulse sequence servo motors and stepping motors on each axis. You can select any two, three, or four axes out of the four axes for linear interpolation, circular interpolation, helical interpolation, bit pattern interpolation, and continuous interpolation. Additionally, multiple MCX514 chips can be linked together to perform multi-axis linear interpolation. This IC eliminates the need for speed multiplication settings, enabling output of drive speeds from 1pps to a maximum of 8Mpps in 1pps increments. 【Features】 ○ Helical Interpolation → In addition to linear and circular interpolation, it can execute helical interpolation drive that synchronizes the movement of other axes during circular interpolation drive in the XY plane. ○ Pre-register → To support high-speed continuous interpolation drive, it is equipped with an 8-stage pre-buffer register that stores endpoint data for each segment. ○ Multi-chip Interpolation → By linking multiple MCX514s, it is possible to perform multi-axis linear interpolation with five or more axes. For more details, please contact us or download the catalog.

• Dedicated IC

The MCX501 is a one-axis motion control IC that controls the positioning or speed of servo motors and stepping motors in a pulse sequence. This IC eliminates the need for speed multiplier (range) settings and can freely output drive speeds from 1pps to a maximum of 8Mpps in 1pps increments. The acceleration and deceleration drive can perform trapezoidal acceleration/deceleration as well as smooth S-curve acceleration/deceleration. 【Features】 ○ Types of acceleration and deceleration drives → The acceleration and deceleration drive can perform constant speed drive / linear acceleration/deceleration drive (symmetric/asymmetric) / S-curve acceleration/deceleration drive (symmetric/asymmetric). ○ Automatic deceleration start → In position drives using linear acceleration/deceleration (symmetric/asymmetric) and S-curve acceleration/deceleration drive (symmetric), the IC calculates the deceleration start point and automatically begins deceleration (asymmetric S-curve acceleration/deceleration drive is not supported). ○ S-curve acceleration/deceleration curve → S-curve acceleration/deceleration increases/decreases acceleration and deceleration linearly, resulting in a quadratic parabolic acceleration/deceleration speed curve. → The unique method also prevents triangular waveforms during S-curve acceleration/deceleration. For more details, please contact us or download the catalog.

• Dedicated IC

● Asymmetric trapezoidal acceleration and deceleration drives can be automatically decelerated. Symmetrical complete S-curve acceleration and deceleration drives can also be automatically decelerated. ● All input signals for each axis are equipped with an integrated filter. This significantly reduces surrounding C and R components. ● With a maximum speed of 2Mpps, continuous interpolation combining linear interpolation and circular interpolation can be performed. ● It has a built-in automatic origin return function. There is no need to create complicated origin return sequences in the program. ● It is possible to start drives of other axes or synchronize with external devices due to drive completion or passing through specified positions.

• Other FA equipment
• Other semiconductors

■Integral Type Digital Filter The conventional integral filter composed of resistors and capacitors has a fixed time constant determined by the values of the components used. However, the integral type digital filter built into the PIX132 allows for the signal delay time to be freely set between 1μsec and 32msec. ■Simultaneous Latching of All Inputs and Simultaneous Setting of All Outputs With an external strobe signal, commands from the CPU, or the timing of a built-in timer's timeout, all 32 input signals can be latched simultaneously. Additionally, when all 32 output points are set, all output signals can be set simultaneously at the same timing. ■Capture of Changes in All Inputs There is a function to capture the rising or falling changes of all 32 input signals. Furthermore, it can generate an interrupt signal to the CPU whenever any of the input signals change.

• Other semiconductors

■ Programmable features (Programs can be easily created with dedicated software.) ■ Serial control interface (Serial communication commands are provided, allowing for user-specific programming.) ■ Parallel control interface (Can be connected to higher-level PLCs and driven with arbitrary data.) ■ Various origin search modes ■ Power-on automatic start ■ Remote box (An optional dedicated remote box is available, allowing for program writing, jog feed, and program execution by connecting to the main unit via RS232C, even without a computer.)

• Other FA equipment
• Servo

- It has arc/linear interpolation functionality. The MC8043P performs arc/linear interpolation calculations using hardware within the MCX314As. By setting parameters such as endpoint coordinates, arc center coordinates, and speed, and simply writing the interpolation start command, interpolation drive can be initiated immediately. There is no need for setup time for calculations. Additionally, continuous interpolation can be performed by freely combining linear and arc interpolation without stopping the interpolation drive. - High-speed drive is possible. Each axis can achieve acceleration and deceleration drives of up to 4 Mpps. In arc/linear interpolation drives, interpolation drives of up to 4 Mpps are also possible. - In addition to S-curve acceleration and deceleration drives (trapezoidal drive), parabolic S-curve acceleration and deceleration drives are possible. S-curve acceleration and deceleration drives maintain a smooth S-curve even with a low number of output pulses.

• Other FA equipment
• Servo
• controller

The MC8082P board is a PCI bus-compatible circuit board equipped with two general-purpose 4-axis motor control ICs, the MCX304. It can independently control the positioning or speed of up to eight servo motors or stepping motors on a single board. 【Features】 ■ PCI half-size with 8-axis independent control ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration *For more details, please request documentation or view the PDF data available for download.

• Other FA equipment