篠原電機 List of Products and Services

The "Connected Plastic Gallery (for indoor use)" is a ventilation component for control panels, instrument panels, etc. Holes are drilled to the panel cut dimensions, and the plastic gallery can be easily fitted from the front and mounted with mounting brackets from the back. The "GP-9" can accommodate a 92mm square fan motor, while the "GP-12" can accommodate a 120mm square fan motor. Additionally, the installation of dust filters is also easy. Furthermore, by using the plastic gallery joints (PGJ-12, PGJW-12), it can be connected in pairs, threes, and so on (only for GP-12). 【Features】 ■ For indoor use ■ Easy to install ■ Easy installation of dust filters ■ Can be connected using plastic gallery joints (only for GP-12) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Free Aluminum Gallery" is an aluminum ventilation gallery designed for ventilation within enclosures such as cubicles, distribution boards, and control panels. It can be manufactured to your specified dimensions, eliminating the need to process ventilation holes directly into the panels as was done traditionally. Please install this product as a component afterward. It offers high ventilation efficiency and is opaque. It is lightweight and does not pose a rust concern. 【Features】 ■ Customizable to your specified dimensions ■ No need to process ventilation holes in the panels ■ High ventilation efficiency and opaque ■ Lightweight with no rust concerns *For more details, please refer to the PDF materials or feel free to contact us.

• Other consumables

The "Ventilation Fan Hood IP34" is a product used as a ventilation fan for control panels, control boards, cubicles, etc. It is easy to install; simply insert it into the panel hole from the front and secure the ventilation fan with screws from the back. The set includes the hood, fan, finger guard, and a power cord (1m), so you can use it right away. If you want to maintain a similar opening area for the hood in relation to the fan diameter, you can use a mounting plate to install a hood that is one size larger. 【Features】 - Easy installation. Just insert it into the panel hole from the front and secure the ventilation fan with screws from the back. - The set includes the hood, fan, finger guard, and a power cord (1m), so you can use it right away. - If you want to maintain a similar opening area for the hood in relation to the fan diameter, you can use a mounting plate to install a hood that is one size larger. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Hooded Gallery IP34" is a ventilation component for control panels, operation panels, cubicles, etc. Due to its structure with a hood on the gallery, it is effective against wind and rain. Additionally, installation is simple; it can be mounted by inserting it into the panel hole from the front and securing it with screws from the back with a holding frame. With the included accessories such as an anti-blow cover, insect mesh, and dust filter, specifications can be selected according to the application (only FG-15 and FG-20). It can also be paired with a salt-resistant filter. 【Features】 ■ Its structure with a hood on the gallery makes it effective against wind and rain. ■ Installation is easy. It can be mounted by inserting it into the panel hole from the front and securing it with screws from the back with a holding frame (holding plate). ■ It can also be paired with a salt damage prevention filter. *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Small Ventilation Gallery (for Indoor Use)" can be installed as a component for ventilating indoor distribution boards, control panels, instrument panels, etc., after the completion of the enclosure (it is not waterproof). There is no need to directly process ventilation holes in the panel as was done traditionally, and by installing it later, work efficiency can be improved. Additionally, it is also possible to install a 120 square motor fan. We also offer a small ventilation gallery with a dust filter that can be attached and removed from the front. 【Features】 ■ No need to directly process ventilation holes in the panel ■ Improved work efficiency by installing it later ■ Can also accommodate a 120 square motor fan (SG1-10-4) ■ Material: Steel plate…1.6mm with primer, Stainless steel…1.5mm *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Fan Unit" is a product used as a ceiling exhaust component for control panels. When exhausting from the top of the panel, the hinge structure allows for easy maintenance and replacement of the filter from the inside, eliminating the need for high-altitude work or ladders. Since the fan and terminal block are pre-assembled, installation is simple: just connect the power line to the terminal block after mounting it to the enclosure. 【Features】 ■ Easy filter maintenance with a hinge structure ■ Filter replacement can be done from inside the control panel, eliminating the need for high-altitude work ■ Fan and terminal block are pre-assembled ■ Maximum airflow (m3/min): 50/60Hz 2.0/2.3 *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

The "Fan-equipped Gallery (Salt Damage Prevention Specification) IP45" is a product used for forced ventilation (exhaust) of various panels. It features a salt-resistant filter designed for salt damage prevention, and its structure is excellent in waterproofing due to the drainage filter. Additionally, we also offer stainless steel fan-equipped galleries that can be used outdoors. 【Features】 ■ Salt damage prevention specification with a salt-resistant filter ■ Excellent waterproof structure ■ Can be installed with only corner hole processing on the panel ■ The included fan comes with a finger guard and power cord ■ The drainage filter and dust filter can be regenerated through cleaning ■ Standard paint color: Munsell 5Y7/1 semi-gloss *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Inwing Type Ventilation Gallery (Splash-Proof Type) IP45" is designed for outdoor use with a splash prevention cover, ensuring an opening area of 148 cm². Since there is no need for processing ventilation holes in the panel as in conventional designs, significant labor savings can be achieved, and adding additional ventilation holes is also easy. Moreover, by combining the rear-side gallery with the splash prevention cover, it offers excellent waterproofing and is constructed to withstand JIS C 0920 (splash-proof test). 【Features】 ■ Splash-proof type IP45 ■ Outdoor specification with splash prevention cover ■ Double-structured gallery ■ No need for processing ventilation holes ■ Easy to add ventilation holes ■ Excellent waterproofing and withstands JIS C 0920 (splash-proof test) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Slim Splash-Proof Gallery" achieves significant downsizing in depth dimensions while ensuring the same level of protection as conventional products, allowing for space-saving design. Thanks to the effect of the inner parts, the filter surface is less exposed to rain and wind, so even in rainy weather, the water film does not reduce the filter's ventilation capacity. Maintenance work on the filter can be performed from the front side. A fan can be installed on the back side (please use it for exhaust purposes when installing the fan). We also offer a salt damage-resistant version in 20 types "GTS-20W-ST" and 45 types "GTS-45W-ST." 【Features】 ■ Inner parts allow air to pass while stopping water ■ Space-saving and compact ■ Splash-proof: IP45 ■ Filter replacement possible from the front ■ Ventilation fan installation available (back side) *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

The "Anti-Splash Type Gallery (Salt Damage Prevention Specification)" is a product designed for salt damage prevention, featuring excellent impact resistance and achieving more than twice the lifespan of conventional products. It has a high collection efficiency for marine salt particles, and even when the collected marine salt particles deliquesce, the increase in pressure loss is low, resulting in approximately half the low pressure loss compared to conventional products. Additionally, we offer a cover resin type that allows for the use of standard salt-resistant filters and dust filters interchangeably. 【Features】 ■ Salt damage prevention specification ■ Low pressure loss (about half of conventional products) ■ High collection efficiency for marine salt particles ■ Long lifespan (more than twice that of conventional products) ■ Excellent impact resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Splash-proof Gallery IP45" is a product used for cubicles, distribution boards, etc., installed in harsh outdoor conditions exposed to wind and rain. 【Features】 1. There is no need to process large panels for ventilation holes as before. Please install this "Ventilation Gallery" as a component afterwards. 2. The ventilation gallery and the splash-proof cover are integrated, providing good waterproofing and a structure that withstands JIS C 0920 (splash-proof test). 3. There is also a stainless steel ventilation gallery available. *For more details, please refer to the PDF materials or feel free to contact us.*

• Board materials

The "Ventilation Gallery (made of steel and stainless steel)" is a product used as a ventilation component for operation panels, control panels, distribution boards, cubicles, etc. Since it eliminates the need for processing ventilation holes in panels as in the past, it significantly reduces labor. Additionally, installation is extremely simple; the product can be fitted into the panel hole from the front and secured with a backing frame using screws from the back. With accessories such as a blow-in prevention cover, insect mesh, and dust filter, specifications can be selected according to the application. Other options include "Corrosion-resistant specification IP41" and "Filter front replacement type G2-20FM (for indoor use)" among the lineup. 【Features】 ■ No need for processing ventilation holes in panels ■ Extremely easy installation ■ Specifications can be selected according to application with accessories ■ Can also be used outdoors with the blow-in prevention cover (accessory) ■ Insect mesh compatible with IPX2 is also available *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Eco Duct (ED Series)" is a product that adopts non-halogen resin, which does not produce harmful gases during incineration, with consideration for the environment. Its flame retardancy is certified as UL94V-0 self-extinguishing, and the ED duct has superior heat resistance compared to conventional PVC. Its specific gravity is approximately 20% lighter than PVC. It adopts the standard colors of the Japan Electrical Distribution Equipment Manufacturers' Association and the Japan Electrical Manufacturers' Association, and the side openings of the ED duct have a chamfered finish on the inner surface. 【Features】 ■ Environmentally friendly ■ No harmful gases produced during incineration ■ Uses non-halogen resin ■ UL94V-0 certified self-extinguishing ■ Approximately 20% lighter than PVC *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Wiring Duct" from Shinohara Electric is a UL-certified product that complies with the combustion test of the Japan Railway Vehicle Mechanics Association. In addition to the N type, which has no side holes (wiring outlet holes) or mounting holes, we offer various types of wiring outlet holes, including L type, C type, I type, and separator type. A duct cover is also included. 【Features】 ■ Complies with the combustion test of the Japan Railway Vehicle Mechanics Association ■ UL-certified product ■ Type N available with no side holes or mounting holes ■ Duct cover included *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Cable Tie Fastener" is a product used as a fastener for cable ties. The material is made of 66 nylon in a milky white color. We offer three types of fasteners: A, B, and C. 【Features】 ■ Fastener for cable ties ■ Made of 66 nylon in milky white color (UL-94, V-2) ■ Available in three types: A, B, and C ■ Packaging: 100 pieces per bag *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Wrapping Tube (Reversible Type)" is a product used for protecting wires in distribution boards, labor-saving devices, machine wiring, electrical work, and more. It excels in weather resistance, chemical resistance, and flexibility, and since the sheet colors are different on each side (gray and black), you can choose colors according to your application. It uses quick tape, allowing for easy opening and closing. Partial opening is also possible, enabling wire branching. Additionally, the full contact prevents dust and oil from entering the tube. No tools are required, making bundling work, wire changes, and inspections easy. 【Features】 ■ Different sheet colors on each side for versatile use ■ Quick tape allows for easy opening and closing ■ No tools required for bundling work, wire changes, and inspections ■ Partial opening is possible, allowing for wire branching ■ Prevents dust and oil from entering the tube ■ Excellent weather resistance, chemical resistance, and flexibility *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Fastener Tube" is a product used for the protection of wire bundling in distribution boards, labor-saving equipment, machine wiring, electrical work, etc. Bundling work can be easily performed using a dedicated slider. Since attachment and removal are easy, inspection and maintenance time can be significantly reduced. It can be cut to any desired length, making it economical with no waste. Due to its full contact design, dust and oil do not enter the tube. It is particularly excellent in insulation, flame resistance, and flexibility. 【Features】 ■ Easy bundling work using a dedicated slider ■ Easy attachment and removal ■ Significant reduction in maintenance time ■ Economical with no waste as it can be cut to size ■ Prevents dust and oil from entering the tube ■ Particularly excellent in insulation, flame resistance, and flexibility *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "WS Wire Support" is a product used as a wire support for distribution boards, control panels, and more. There are types WS-1 to WS-3, and by combining WS-1 and WS-2, it can support a variety of wires. 【Features】 - Supports a variety of wires by combining WS-1 and WS-2 - Material: Polycarbonate (with glass fiber), black - Wire size range: Outer diameter φ2 to φ12 *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Control Panel

The "Free Cleat Mounting Base" is a product used for intermediate support (stabilization) of electrical wires. It features round holes processed at 20mm intervals in a resin extruded material. Using cable ties and other tools, intermediate support for electrical wires can be easily achieved. 【Features】 ■ Round holes processed at 20mm intervals ■ Easy intermediate support for electrical wires ■ Material: Polyvinyl Chloride *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

The "FRP Cleat KW Type" is a product used for holding high-pressure insulated wires inside equipment. It can also be used as a separator in between. Since it is made from processed FRP material, it is lightweight and does not rust. It has high strength, excellent insulation and moisture resistance, and allows for free processing of dimensions between wires. 【Features】 ■ Lightweight and rust-free ■ High strength ■ Good insulation properties ■ Good moisture resistance ■ Excellent arc resistance ■ Dimensions between wires can be freely processed *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The "FRP Cleat Type P" can be used as an insulating fixed support for low-pressure busbars within panels, as well as a separator in the middle. Since it is made from processed FRP material, it is lightweight and does not rust. It has high strength, excellent insulation properties, and is easy to process. Furthermore, it excels in moisture resistance and arc resistance, and there is no need for post-processing after fabrication, similar to Bakelite. 【Features】 - Lightweight and rust-free - High strength - Good insulation properties - Easy to process - Good moisture resistance - Excellent arc resistance - No post-processing required after fabrication *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The "FRP Cleat Type K" can be used as an insulating fixed support for low-pressure busbars within panels, as well as a separator in the middle. Since it is made from processed FRP material, it is lightweight and does not rust. It has high strength, excellent insulation properties, and is easy to process. Furthermore, it excels in moisture resistance and arc resistance, and there is no need for post-processing like with Bakelite after machining. 【Features】 ■ Lightweight and rust-free ■ High strength ■ Good insulation properties ■ Easy to process ■ Good moisture resistance ■ Excellent arc resistance ■ No post-processing required after machining *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The "Busbar Supporter" is a product used for supporting busbars in distribution boards, control panels, etc. It allows for easy support of copper strips simply by clamping from above and below, and should be secured with an M8 bolt (to be provided separately). The material is black polycarbonate (with glass fiber) and uses a resin material that has UL94 V-0 flame retardancy. 【Features】 ■ Easily supports copper strips by simply clamping from above and below ■ Secured with an M8 bolt (to be provided separately) ■ Material: Black polycarbonate (with glass fiber) ■ Uses a resin material with UL94 V-0 flame retardancy *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The RBS-45, a two-tier support base (low-voltage internal conductor insulated support base), is used as a grounding support base for ELB and as a support base for copper busbars in distribution boards and control panels. Since copper busbars can be arranged in two tiers, this product can be used to place two grounding bars in close proximity to the ELB in a limited space, especially when it is necessary to distinguish between the grounding bar for ELB and the general use. 【Features】 ■ Low-voltage internal conductor insulated support base ■ Can arrange copper busbars in two tiers ■ Can place two grounding bars in a limited space ■ Material: Made of polypropylene (black) ■ Dielectric strength: 2.5kV for 1 minute without abnormalities 【UL94 V-0 flame-retardant type RBS-96-SPS】 【Features】 1. Molded from "SPS," one of the lightest resins among engineering plastics, offering excellent heat resistance and strength. 2. Eliminates the need for manual processing of insulating materials as in the past. 3. Features a step design for easy wiring management. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The "three-stage support stand" is a product used as a bus support stand for distribution boards and similar applications. It comes with square nuts, making it easy to support copper strips. Additionally, it is lightweight because it is made of resin. 【Features】 ■ Easily supports copper strips ■ Lightweight due to being made of resin 【Material】 Made of ABS resin (black, green) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• Distribution Board

The "Inclined Busbar Support (RBS-40・RBS-50)" is a product used as a busbar for branch wiring and as a support. Due to the inclined design of the busbar, wire connection work can be done easily, and it requires less installation space. Additionally, the bolt and nut components are treated with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ The busbar is inclined ■ Easy wire connection work ■ Requires less installation space ■ Material: Made of polypropylene (black) 【RBS-40-3U-RO】 ■ This is a relay unit using BS-40. It comes assembled with a mounting bracket, copper bar, and protective cover. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

【Features】 1. The copper strip can be fixed by tightening it with mounting bolts to the bar holder S/S-150, allowing for a wide range of thicknesses and widths of the copper strip. 2. It reduces the manual processing time required for conventional insulating materials. 3. A separator can be placed in the middle, allowing for parallel installation of the copper strip from both sides. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

The "Bar Holder L (Copper Strip Insulation Support)" secures the copper strip by tightening it with a mounting bolt, making it suitable for a wide range of thicknesses and widths of copper strips. With a flat bottom, it offers stability and excellent strength. It eliminates the need for manual processing of conventional insulating materials. 【Features】 ■ Secured by tightening with a mounting bolt ■ Usable for a wide range of thicknesses and widths (up to 75mm) ■ Flat bottom provides stability and superior strength ■ Reduces the need for manual processing of conventional insulating materials ■ Also available in flame-retardant (UB type). 【Material】 ■ Made of polypropylene *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

The "Bar Holder X (Insulated Support for Low-Pressure Copper Strips)" is a product that can support copper strips without drilling holes by sandwiching them from above and below. It features a groove surface of 20mm width intersecting with a groove surface of 11mm width at a right angle, allowing for two different usage methods. Additionally, it can support copper strips with a thickness ranging from 10mm to 20mm, and it is also possible to install two 6mm strips. The width of the copper strip that can be supported ranges from 50mm to 125mm, and for copper strips wider than 75mm, insulated bolts are available. 【Features】 - Can be used without drilling holes for supporting copper strips - Supports by sandwiching from above and below - Allows for two different usage methods - Can support copper strips with a thickness of 10mm to 20mm - Supports copper strips with a width of 50mm to 125mm - Insulated bolts are provided for supporting copper strips wider than 75mm *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

The "Indoor Support Insulator Mounting Bracket" is a mounting bracket for indoor support insulators for busbars and electrical wires within distribution boards. We offer a wide range of sizes to match the pitch of the mounting holes for indoor support insulators. You can select clamps for round wires (high-voltage insulated wires) and busbars (vertical support and horizontal support) according to your application. 【Features】 ■ A wide range of sizes to match various mounting hole pitches ■ Clamps can be selected for round wires and busbars according to application ■ Material: Clamps for round wires (high-voltage insulated wires): made of brass (Note: Only CB-30FJ is made of steel plate) Clamps for busbars (vertical and horizontal support types): made of cast iron and brass *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials

The "High Voltage Terminal Block (JT-60, JT-150)" is a product used for connecting high voltage power lines. The mounting bar stands vertically, making it easy to attach terminals. The conductive parts are covered with a transparent cover, allowing for clear visibility of the connection points, and the insulated cover ensures safety even if hands accidentally touch the area. 【Features】 ■ Easy terminal attachment ■ Clear visibility of connection points due to the transparent cover ■ Excellent safety due to the insulated cover *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Terminal Blocks

The "Resin Insulator (6kV)" is a product used as a mounting base for high-voltage equipment such as disconnectors and circuit breakers, as well as an insulation support for busbar wiring. Compared to conventional porcelain insulators, it is smaller, lighter, highly durable, and contributes to rationalization. It also boasts excellent electrical and mechanical properties and is manufactured in accordance with JIS standards (JIS-C3851). 【Features】 - Smaller and lighter compared to conventional porcelain insulators - Highly durable and contributes to rationalization - Excellent electrical and mechanical properties - Manufactured in accordance with JIS standards (JIS-C3851) - Material: Specially processed epoxy resin *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• Wiring materials
• Inverter

The "Insulation Bush" is a product used for insulating the base parts of various devices such as sequencers and inverters. It comes as a set of uneven surfaces, allowing for insulation of the base parts of devices as shown in the image. It can be used with bolt diameters of M4, M5, M6, M8, M10, and M12. 【Features】 ■ Set of uneven surfaces ■ Ensures insulation of the base parts of devices ■ Usable with bolts of M4, M5, M6, M8, M10, and M12 ■ Material: PP (black) *Specification changed from white Delrin *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Inverter
• Wiring materials

The "EI Supporter" is used as an insulating base for equipment installation such as distribution boards, control panels, etc., and as an insulation support for busbars and wiring. Made of epoxy resin, it has excellent insulation properties and is lightweight. Its load-bearing capacity is superior to that of conventional supporters, thus expanding its range of applications even further. 【Features】 ■ Superior load-bearing capacity compared to conventional supporters ■ Excellent insulation properties and lightweight ■ Material: Epoxy resin *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "Supporter Tightening Assistance Tool (SST-2P)" is an auxiliary tool manufactured by Shinohara Electric that prevents the supporter from spinning during installation. By inserting and securing the pin of this product into the pin hole on the top surface of the supporter, it prevents the supporter from spinning and improves the efficiency of the installation work. Additionally, the shape has been designed to fit comfortably in the hand, making it easier to use. We also offer the "SST-1" as a tightening assistance tool for installing Shinohara supporters. 【Features】 ■ Set of SST-2S and SST-2L ■ Auxiliary tool to prevent supporter spinning ■ Grip section designed with steps for improved usability ■ Prevents supporter spinning and enhances installation work efficiency ■ Diameter of compatible supporters is engraved on the main body *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "Supporter Connecting Bug Screw" is used as a connecting bolt when linking two or more supporters (excluding SS and DD types). The material is made of iron, and the bolt and nut parts are finished with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ Connecting bolt for linking two or more supporters (excluding SS and DD types) ■ Material: Iron ■ Bolt and nut parts are finished with environmentally friendly trivalent chrome electro-galvanizing *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "Supporter (Low-Pressure Internal Conductor Insulation Support Base)" is used as an insulating base for mounting equipment such as distribution boards, control panels, and rectifier panels, as well as for insulating support for busbar wiring and electrical wiring. It has excellent insulation properties (with a dielectric strength of 2.5kV for 1 minute) and is lightweight. This eliminates the need for manual processing of insulation materials as done traditionally. There are two types available: double-sided nuts (S, T, D types) and nut-bolt combinations (SB, TB, DB types), each with a wide variety of heights and diameters, allowing for use according to specific applications. 【Features】 ■ Eliminates the need for manual processing of insulation materials ■ Two types: double-sided nuts and nut-bolt combinations ■ Excellent insulation properties: dielectric strength of over 22kV for 1 minute ■ Lightweight ■ Can also be used as a branching base by attaching branching hardware *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "E.P. Holder (High Voltage In-Flight Insulated Wire Support)" is a product manufactured based on the standards specified in the guidelines for the certification of cubicle-type emergency power supply receiving equipment established by the Japan Electric Association. It is lightweight and has excellent insulation properties (with a dielectric strength of over 22kV). By using an adapter, it can completely hold KIP wires ranging from 5.5 to 150 square millimeters. 【Features】 ■ Manufactured based on the standards specified in the guidelines for the certification of cubicle-type emergency power supply receiving equipment ■ Completely holds KIP wires from 5.5 to 150 square millimeters using an adapter ■ Excellent insulation properties: dielectric strength of over 22kV ■ Lightweight *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

【Features】 1. By tightening with a cable tie, wires can be easily and securely held. 2. We offer three types with different heights, allowing you to use them according to your needs. 3. Excellent insulation properties and lightweight. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "Cable Bracket (Cast Iron and Aluminum)" is a bracket for terminal processing of power cables. The materials available are cast iron and aluminum. The cast iron version includes a black rust-proof painted type for multi-core cables and a single-core type with only the fastening hardware made of copper alloy. 【Materials】 ■ For Multi-Core… Cast iron with black rust-proof paint ■ For Single-Core… Fastening hardware only made of copper alloy; other parts are cast iron with black rust-proof paint ■ Aluminum… Main body: made of aluminum, bolts: made of stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other cable related products
• bracket

"Iso-Rams" is an insulated flexible busbar made by laminating a highly flexible strip copper conductor and coating it with self-extinguishing black PVC resin. It can connect to various devices and copper busbars with different laminated copper strip widths. It is particularly effective for electrical equipment with high current capacity. Additionally, it has a smaller temperature rise compared to cables and bare copper busbars, and its laminated structure reduces the increase in AC resistance due to the skin effect. 【Features】 ■ Wide range of conductor sizes: 21–1200 mm² ■ Can connect to various devices and copper busbars with different laminated copper strip widths ■ High insulation performance ■ Smaller temperature rise compared to cables and bare copper busbars ■ Reduces the increase in AC resistance due to the skin effect *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Control Panel
• Distribution Board

"Proto Oil-Based" is a one-component, room temperature natural drying liquid rubber coating agent developed in the United States. It can easily form a flexible and durable rubber-like film using the same application method as conventional paint. The coating can be applied to a wide range of materials including metal, wood, stone, glass, plastic, fiber, and paper, demonstrating excellent durability even under harsh weather conditions. Both oil-based and water-based options are available, each with unique characteristics. Please use according to your application needs. 【Features】 ■ Same application method as regular paint, easy to use ■ Flexible and durable rubber-like film ■ Flexible response (does not crack or chip) ■ Excellent effects for electrical insulation, waterproofing, rust prevention, and mold/corrosion resistance ■ Dried film does not change (applicable temperature range is -34°C to +94°C) *For more details, please refer to the PDF document or feel free to contact us.

• paint
• Rubber

The "Switch Bridge Bar for Switches" is a bridge bar used for wiring connections such as push buttons and select switches. By using it for common line wiring of switches, wiring can be streamlined. This is particularly effective in control panels with many switches, resulting in a neater wiring finish. The insertion shape is fork-type (Y-shaped), making installation and removal easy. The exposed parts are treated with an insulating coating for safety. 【Features】 - Streamlines common line wiring - Especially neat finish for control panels with many switches - Easy installation and removal - Exposed parts are insulated and safe - Material: Brass plate t=0.6mm, nickel-plated finish, with insulating coating *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• switch

The "Push Button Bridge Bar (Round Terminal Type)" is a bridge bar used for the common wiring of push button switches. Not only does it make the common wiring of push button switches easier compared to using wires, but it also reduces labor in wiring. Additionally, the exposed parts are treated with an insulation coating for safety. 【Features】 ■ Reduces labor in wiring ■ Easier wiring compared to using wires ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass t=0.7mm, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Wiring materials
• switch

By using it for the jumper wiring of terminal blocks, labor-saving in wiring can be achieved. Additionally, the exposed parts are treated with insulation coating, ensuring safety. We offer round terminal types designed to fit terminal blocks with a terminal pitch of 16mm, 24mm, and a pole pitch of 11mm. 【Features】 ■ Achieves labor-saving in wiring ■ Used for jumper wiring of terminal blocks ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Terminal Blocks