篠原電機 List of Products and Services

The "Wiring Bar for Circuit Protectors" is a wiring bar suitable for the wiring of circuit protectors with a body width of 35mm. By using it for the wiring of circuit protectors, labor-saving in wiring can be achieved. There are two types available: a bent type suitable for combining multiple wiring bars, and a flat type suitable for use with crimp terminals for primary and secondary wiring. The exposed parts are treated with an insulating coating, ensuring safety. 【Features】 ■ Labor-saving in wiring ■ Two types: bent type and flat type ■ Exposed parts are treated with an insulating coating for safety ■ Applicable to circuit protectors with a body width of 35mm ■ Material: Brass t=0.8mm, nickel-plated finish, with insulating coating (black) *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "Relay Jumper Bar" can be used for wiring connections in relay sockets, remote relays, etc., which helps to reduce labor in wiring. There are five types of terminal pitch: 19.4mm, 22mm, 25mm, 28mm, and 29mm. By selecting according to the compatible models, work efficiency can be improved. Additionally, the exposed parts are treated with insulation coating for safety. We also offer jumper bars with terminal spacing of 10mm and 15.5mm, as well as round terminal types. 【Features】 ■ Reduces labor in wiring ■ Five types of terminal pitch to choose from ■ Improves work efficiency ■ Exposed parts are insulated and safe ■ Material: Brass t=0.7mm, nickel-plated finish, with insulation coating (black) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Terminal Blocks
• socket

The "Earth Bar" is used as a grounding copper bar for control panels, distribution boards, and more. Since the screw holes are pre-processed, there is no need for tapping after purchase. There are various sizes and numbers of screw holes available, allowing you to choose according to the number of incoming lines. We also accept custom size orders. Additionally, we offer earth bars that can be attached to the "Earth Terminal EC8-2" manufactured by Shinohara Electric. 【Features】 ■ Pre-processed screw holes ■ Saves the hassle of tapping ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Control Panel
• Distribution Board

The "branch bus copper bar" is used as a bus bar for control panels and distribution boards, as well as for branch bus bars. Since the screw holes are pre-processed, the hassle of tapping is eliminated. We offer seven types of standard products ranging from 100A to 400A. You can cut them according to your needs for use. Additionally, we also accept orders for custom dimensions. 【Features】 ■ Pre-processed screw holes ■ Eliminates the hassle of tapping ■ A lineup of seven standard products from 100A to 400A ■ Can be cut according to application ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Control Panel
• Distribution Board

The "joint bar" is used as a joint between the main breaker and the bus bar when changing the pitch width of the bus bar. It is particularly convenient to use in conjunction with our "bus bars for slim breakers" when using a neutral terminal integrated breaker (slim breaker). We offer various types compatible with main breaker capacities of 50AF, 100AF, 125AF, 225AF, and 250AF, allowing you to use them according to your needs. 【Features】 ■ Changes the pitch width of the bus bar ■ Various types available to match the capacity of the main breaker ■ Material: Copper with glossy tin plating finish *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• joint

The "bus bar for distribution boards" is used as a bus bar for each breaker in the distribution board. By using pre-standardized bus bars during the assembly of the distribution board, you can eliminate the hassle of manufacturing them each time as was done in the past. We offer C-type, S-type, T-type, TC-type, and TS-type in varying lengths. The material is copper bar with nickel plating finish. 【Features】 ■ For distribution boards ■ Used in advance during assembly ■ Material: Copper bar with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board

The "Slim Breaker Busbar" is a busbar specifically designed for neutral terminal integrated breakers (Slim Breakers). Its structure does not create any steps on the main busbar, allowing it to be used with conventional designs, making wiring work easy. It is equipped with an insulating tube, so you can use it with confidence. (The SB-T type does not have an insulating tube.) Additionally, we offer a "3-phase 4-wire type with a 30mm pitch" for 100A circuits and a "3-phase 4-wire type with a 35mm pitch" for 225A circuits. 【Features】 ■ Structure that does not create steps on the main busbar ■ Usable with conventional designs ■ Easy wiring work ■ Insulated covering (excluding SB-T type) ■ Rated current: 30A *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Flat Post" is a mounting bracket for adjusting the height of equipment installation within a panel. Adjustment and fine-tuning can be easily done even after preliminary installation of the equipment. It is made of steel plate and finished with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ Easy adjustment and fine-tuning even after preliminary installation ■ Environmentally friendly trivalent chrome electro-galvanized finish *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Distribution Board Post (Decorative Screw)" is a mounting bracket that allows for the height adjustment of the inner plate (decorative plate) of the distribution board. By attaching the inner plate (screw-fixed) to the CP type post (hinge post) and installing the UP type post (receiving post) on the opposite side, the complex installation work of the inner plate becomes easier and more efficient. The height can be freely adjusted from 64mm to 250mm. Additionally, it features an environmentally friendly electric zinc plating with trivalent chromate treatment. 【Features】 ■ Easy installation ■ Height adjustable from 64mm to 250mm ■ Environmentally friendly electric zinc plating with trivalent chromate treatment *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board

The "KS Mini Post" is a post used as an insulation support. It has excellent insulation properties and a dielectric strength of AC2000V for 1 minute. The material is ABS (black). 【Features】 ■ Excellent insulation properties ■ Dielectric strength AC2000V for 1 minute ■ Material: ABS (black) with 2 M3 brass screws included *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Jura Con Spacer" is a post used for mounting and supporting printed circuit boards, connectors, acrylic covers, and more. It has excellent insulation properties, is lightweight, and easy to handle. It comes with a nickel-plated finish and is available in hexagonal types "BS type" and "AS type," as well as round types "BR type" and "AR type." 【Features】 ■ Excellent insulation properties ■ Lightweight and easy to handle ■ Nickel-plated finish ■ Available in hexagonal and round types *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other machine elements
• Other core systems

【Features】 The round post is covered with a gray heat shrink tube. M4 has a thickness of 0.07mm, while M5 and M6 have a thickness of 0.1mm applied to the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

• Board materials

【Features】 ■ By connecting two pieces, the height can be adjusted to 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ The head of the main body is designed with a (-) groove so that it can be tightened with a (-) screwdriver. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

【Features】 The hexagonal post is covered with a gray heat shrink tube. For M4, a thickness of 0.07mm is used, while M5 and M6 are covered with a thickness of 0.1mm in the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

• Board materials

This is a bracket used to adjust the installation height of equipment inside the panel. 【Features】 ■ By connecting two pieces, the height can be adjusted to either 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ It can be tightened with a wrench or monkey wrench. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "standpipe" is a mounting stand used for operation panels, measurement panels, control panels, and more. Standard products are available for immediate delivery, eliminating the need to create drawings and arrange orders as was previously required. In addition to the lineup of S-type, D-type, and K-type, we also accept orders for special sizes. 【Features】 ■ Standard products are available for immediate delivery ■ No need to create drawings and arrange orders ■ Three types available: S-type, D-type, K-type ■ Special sizes are also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

The "DH Holder (DIN Rail Compatible Noise Filter Mounting Bracket)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail to assist in the installation of noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws use flat-head screws to ensure a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting brackets (PBK series). 【Features】 ■ Can be fixed at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting brackets (PBK series) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DH Holder (Switch Mount Type)" is a product used to mount toggle switches and volume controls onto DIN rails made by Shinohara Electric, in combination with the switch mounting brackets "TK-30," "TK-30-6.5," and "TK-30-16.5." It can be fixed at any position on the DIN rail by simply tightening one fixing screw. Additionally, it uses flat head screws for the mounting screws (with countersunk screw holes) to ensure a flat mounting surface. Furthermore, the switch mounting brackets are pre-tapped for easy installation. 【Features】 ■ Applicable brackets: Shinohara Electric switch mounting brackets TK-30, TK-30-6.5, and TK-30-16.5 ■ Can be fixed at any position on the DIN rail ■ Pre-tapped for easy installation ■ Uses flat head screws for mounting *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DH Holder (Blank Type)" is an auxiliary bracket that can be mounted on a DIN rail made by Shinohara Electric and allows customers to perform custom tap hole processing to attach various devices. It can be processed for tap holes and round holes according to the breakers, devices, and brackets used, and is manufactured with a thickness of 2.3mm to ensure the thread can be secured without the need for barrelling. It can be fixed at any position on the DIN rail by simply tightening one fixing screw, so there is no need to attach it directly to the middle plate. Countersunk screws are used for the mounting screws (with countersunk holes), making the mounting surface flat. 【Features】 ■ Custom hole processing can be done according to the breakers, devices, and brackets used ■ Manufactured with a thickness of 2.3mm to ensure thread security ■ No need for direct attachment to the middle plate ■ Countersunk screws are used for the mounting screws *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used with DIN rails manufactured by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It is pre-processed to allow for easy installation of sockets. 5. In addition to socket installation, we can also provide additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DH Holder (DIN Rail Mounting Bracket)" is a product used for mounting wiring ducts, terminal blocks, and terminal plates on DIN rails manufactured by Shinohara Electric. It can be securely fixed at any position on the DIN rail simply by tightening two fixing screws. Mounting equipment can be easily done with screws (4 locations, M4 threaded). It can also be used as a fastening bracket for terminal blocks, relays, etc. 【Features】 ■ Single-side mounting type: S type ■ Double-side mounting type: RL type ■ Equipment can be easily mounted with screws ■ Can also be used as a fastening bracket for terminal blocks, relays, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

Please use it as a cover (finger guard) to protect the charging part of sockets such as relays, in combination with the manufacturer-made DH holder (compatible with protective cover installation). 【Specifications】 ■ Material: Transparent PVC ■ Packaging quantity: 10 pieces ■ Sales unit: 10 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DIN Rail Cutter" is a product used for cutting our aluminum DIN rails. The "Premium DIN Rail Cutter" allows for easy cutting with less than half the force required by conventional products. 【Features】 ■ Easy cutting with less than half the force of conventional products ■ Significant improvement in work efficiency ■ Major reduction in work costs ■ No power supply needed and operates silently ■ No need for deburring the cut surface (LHC-LC) *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "End Cap for DIN Rail" is a terminal protection cap for "DIN Rail" manufactured by Shinohara Electric. 【Features】 ■ Prevents injuries caused by burrs on cut surfaces, enhancing safety. ■ Eliminates the need for processing cut surfaces, improving work efficiency. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

"DIN rail" is a mounting bracket for equipment that conforms to the DIN standard and has a width of 35mm. It complies with the JIS-C-2812 standard. Terminal blocks, sockets, electronic devices, and any mounting equipment that is DIN and 35mm wide can be installed at any position. It is also easy to remove. Additionally, there are steel DIN rails, DIN rails of 15mm height type, and end caps for DIN rails that help prevent injuries. 【Features】 ■ Complies with the JIS-C-2812 standard ■ Can be installed at any position ■ Easy to remove ■ Suitable for mounting large equipment (15mm height type) ■ End caps to prevent injuries are also available ■ Custom cutting of DIN rail dimensions is also accepted. *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

"Freenut" is a mounting nut that can be easily attached from the surface side of the "free circuit board" with a single touch. All equipment installation can be done from the front side without having to reach around to the back. It is an environmentally friendly product finished with trivalent chrome treatment on electro-galvanized steel. 【Features】 ■ One-touch attachment ■ Can be done from the surface side ■ Environmentally friendly product finished with trivalent chrome treatment on electro-galvanized steel *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• nut

The "Free Baseboard" is a mounting plate for mid-plates such as distribution and control panels, as well as other equipment. Since equipment can be mounted using only the distribution diagram, the sheet metal drawings for mid-plates and similar components can be omitted. It can be manufactured according to design dimensions, and when changes or expansions occur, it is only necessary to add this product, eliminating the need for drilling and other modifications. Furthermore, assembly wiring can be done in a separate process from the outer casing, allowing for shortened delivery times. 【Features】 ■ Can be manufactured according to design dimensions ■ Equipment can be mounted using only the distribution diagram ■ No need for drilling or modifications during changes or expansions ■ Assembly wiring can be done in a separate process from the outer casing ■ Delivery times can be shortened *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials
• Circuit board design and manufacturing

The "Cooling Fan Mounting Base" is used as a fan mounting frame for directly cooling internal equipment such as sequencers, capacitors, heat sinks, transformers, and resistors. It is easy to install, eliminating the need for conventional in-house processing, thereby reducing labor in the work process. 【Features】 ■ Easy to install ■ No in-house processing required ■ Labor-saving ■ Made of 2.3mm thick steel plate *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "DC Power Supply Mounting Base" is used as a mounting base for DC power supply devices inside the panel. No processing of mounting holes is required. It is finished with environmentally friendly trivalent chromate treatment on electro-galvanized steel. 【Features】 ■ Steel plate t = 1.6mm ■ No processing of mounting holes is required ■ Environmentally friendly trivalent chromate plated product *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Distribution Board
• Control Panel

The "Fan Terminal Block Mounting Bracket" is a wiring component for ventilation fans. Since it is fastened together with the fan, no additional hole processing for terminal block installation is required. This significantly reduces labor costs and streamlines the terminal block installation process. 【Features】 ■ Significant reduction in labor costs ■ Streamlining of terminal block installation ■ No additional hole processing for terminal block installation required *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Slide-type Breaker Mounting Base (for Main Breakers)" is a structural material used as a mounting frame for main breakers. Since it is slide-type, it can be adjusted to any desired height. Additionally, we offer a total of 15 different sizes to accommodate breakers ranging from 50AF to 400AF. 【Features】 ■ Adjustable to any height with slide mechanism ■ Compatible with breakers from 50AF to 400AF ■ Available in a total of 15 different sizes ■ Made of steel plate with electric zinc plating and trivalent chromate finish *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

【Features】 ■ There is no need to drill new holes or tap for additions, modifications, or changes inside distribution boards, etc. ■ Taps (AH-4, 5, 6) are installed in two directions, allowing for flexible mounting of parts and equipment. ■ It can also be used for wiring and piping in the steel structure of electrical construction. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

Our "assembly hardware" is designed to fit the dimensions of the "ABC channel," making assembly easy with just a bolt tightening. The material is made of steel plate, finished with trivalent chrome electro-galvanizing. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Spacer" is a structural material suitable for reinforcing the "ABC Channel" or as a color during equipment installation. It is processed from steel pipes and finished with electro-galvanized trivalent chromate treatment. Please use it for reinforcing the space when tightening the "ABC Channel." 【Features】 It is optimal for reinforcing the "ABC Channel" or as a color during equipment installation. 【Material】 Processed from steel pipes, finished with electro-galvanized trivalent chromate treatment. *For more details, please refer to the PDF materials or feel free to contact us.

• Board materials

"FRP Insulating Structural Materials (Angles, Channels, Square Pipes)" are structural materials that use fiberglass as a reinforcing base material, combined with thermosetting resin. They possess insulation and strength that cannot be achieved with ordinary plastics. They can be easily cut, drilled, and processed, making them widely usable as insulating structural materials. [Features] - Fiberglass as the reinforcing base material - Structural material combined with thermosetting resin - Excellent insulation and strength - Easy to cut, drill, and process *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "Channel End Cap" is a terminal protection cap for the "ABC Channel" manufactured by Shinohara Electric. It prevents injuries caused by burrs on cut surfaces, thereby enhancing safety. Additionally, it eliminates the need for processing cut surfaces, improving work efficiency. Furthermore, two new types have been added: a trivalent chromate finish and a gray type that blends well with stainless steel. 【Features】 ■ Prevents injuries in advance ■ No need for processing cut surfaces ■ Improves work efficiency ■ Available in trivalent chromate finish and gray type *For more details, please refer to the PDF document or feel free to contact us.

• Board materials

The "ABC Channel (ZAM manufactured)" is a structural material for panels that possesses excellent scratch resistance and high corrosion resistance against bending and cutting processes. Thanks to the zinc-aluminum-magnesium coating layer, it offers performance that surpasses conventional hot-dip galvanized coatings. Additionally, it is an environmentally friendly chromium-free product (compliant with RoHS). Please use it as a supporting hardware for mounting equipment, ducts, electrical wires, busbars, piping, etc. 【Features】 ■ Performance that exceeds conventional hot-dip galvanizing ■ Excellent scratch resistance ■ High corrosion resistance against bending and cutting processes ■ Environmentally friendly chromium-free product (compliant with RoHS) ■ Made of material "ZAM" that exhibits excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

• Distribution Board

The "ABC Channel (CL)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, you can eliminate the need for a middle plate, thus reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, which can improve efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Distribution Board

The "ABC Channel (CC)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are freely possible ■ Shortening of delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Distribution Board

The "ABC Channel (Flat Bar)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Distribution Board

The "ABC Channel (Channel)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications can be made freely ■ Shortening of delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Distribution Board

"ABC Channel (Angle)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. [Features] - Design changes, expansions, and modifications can be made freely - Shortening of delivery times is achievable - Assembly wiring can be done without waiting for the completion of the enclosure - Easy-to-use ABC parts are available, which can improve efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Distribution Board

【Features】 【Compatibility】Suitable mounting pitch for switching from 10W and 20W fluorescent lamps is 280mm/538mm. 【Lightweight】It is lightweight as it does not use metal or glass, making it safe from transport vibrations and installation shocks. 【Compact】With a compact and simple design, it helps save space within the panel. 【Voltage Resistance】It has a voltage resistance performance of AC2000V/min, suitable for use within panels. 【Energy Saving】The power consumption is about half compared to conventional fluorescent lamps. 【ECO】It is a clean lighting solution that does not use mercury. 【Low Heat Generation】It does not get as hot as fluorescent lamps, ensuring safety. 【Insect Repellent】It emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings, thus blocking their intrusion. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Board materials

This is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base, and it is highly flexible, making inspection and maintenance easy. Additionally, branch lines from cable wiring or changes can be accessed from anywhere. It can be cut to any length for use, making it economical with no waste. 【Features】 1. By wrapping electrical wires with a hook tube and securing the hook, bundling cables and pipes becomes easy. 2. It is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base. 3. Its high flexibility allows for easy inspection and maintenance, and branch lines from cable wiring or changes can be accessed from anywhere. 4. It can be cut to any length for use, making it economical with no waste. 5. Due to its high weather resistance, it can be used outdoors. *Please avoid using it in environments where water can enter from the bundling area, as it is not a sealed structure (such as underwater use or in outdoor orientations where rainwater can enter). *For more details, please refer to the PDF materials or feel free to contact us.

• Wiring materials

It can be used as a relay connector box for data communication with PLCs (programmable logic controllers) housed in control panels and similar equipment. With the front cover closed, it has an IP55 rating, preventing dust and water from entering the panel. Additionally, it employs a locking type outlet to prevent accidental disconnection of the power plug. Trial operation adjustments can be made without opening the doors of the control panel. 【Features】 ■ Compliant with RoHS directive ■ Dustproof and waterproof type IP55 ■ Access to internal mechanisms with miniB terminal connection ■ Uses a locking type outlet ■ Allows trial operation adjustments without opening the doors of the control panel *For more details, please refer to the PDF document or feel free to contact us.

• connector