篠原電機 List of Products and Services

A new model has been added to the open/close button cover! Thanks to its hinge design, it's easy to operate buttons and switches! You can choose from two sizes and two colors! 【Features】 1. Installation is done by securing it together with the button or switch, so it won't fall off when opening or closing the cover. 2. It is compatible with buttons and switches with a diameter of approximately φ40 and a projection of about 30mm from the panel. 3. Depending on the intended use, you can differentiate with the cover colors. (Available in two colors: translucent white and translucent red) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "RBS Series" can be used as a bus support for distribution boards, power distribution panels, and other power boards. It is molded from "SPS," one of the lightest resins among engineering plastics, and offers excellent heat resistance and strength. It eliminates the hassle of manually processing insulating materials as in the past. 【Features】 ■ Compatible with 1000V ■ Molded from "SPS," one of the lightest resins ■ Excellent heat resistance and strength ■ Eliminates the hassle of manually processing insulating materials *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Other terminal blocks

【Features】 【Iron Type】 1. We have added an iron type that offers excellent cost performance. This expands the range of options alongside the traditional brass type. 2. It complies with the standards set by the Ministry of Land, Infrastructure, Transport and Tourism. 【Embedded Screw Type】 1. Flat washers and S washers are incorporated into the screws. (P=3 sem type) 2. It is a hex up-set type that can be tightened with a Phillips screwdriver. 3. The BECX-5S-10 has a shorter neck length than the conventional embedded screw type green bolt, making it ideal for wiring such as ground bosses. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Blank Panel" is installed in areas of the rack where servers are not present, improving air conditioning efficiency. Additionally, it can also be used as a heat shutter panel in the gaps on both sides of the 19-inch mount angle. It has notches every 1/2U, making it easy to cut with scissors or a cutter. Furthermore, no tools are required for installation. You simply push in the rivets, allowing for quick setup. We also offer a custom "Air Duct/Door Diffuser" that can be used as a heat exhaust rectifier made from the same material as the blank panel. 【Features】 ■ Easy to cut with scissors or a cutter due to notches every 1/2U ■ No tools required for installation ■ Simply push in the rivets ■ Quick installation possible ■ Lightweight and easy to handle and store *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment

The "Hock Tube" is a wiring bundling material that allows for easy bundling work by wrapping electrical wires and securing them with a hook. 【Features】 1. You can easily bundle wires by wrapping them with the Hock Tube and securing them with a hook. 2. It is highly flexible, making it easy to change wiring, inspect, and maintain. Additionally, branch wires can be accessed from anywhere. 3. It can be cut to any desired length, making it economical and eliminating waste. *For more details, please refer to the catalog or feel free to contact us.*

• Wiring materials

Please use this for measures against equipment corrosion and electrical system troubles due to salt damage at various facilities and factories in coastal areas. 【Features】 1. Low pressure loss. 2. High collection efficiency for sea salt particles. 3. Long lifespan. 4. Even if the collected sea salt particles on the filter media deliquesce, the increase in pressure loss is low. 5. Even if the collected sea salt particles on the filter media deliquesce, the outflow to the downstream and re-dispersion is very minimal. 6. Excellent impact resistance. *For more details, please refer to the catalog or feel free to contact us.

• filter

【Long Lifespan】Approximately five times longer lifespan compared to conventional fluorescent lamps. 【Energy Saving】About half the power consumption compared to conventional fluorescent lamps. 【ECO】A clean lighting solution that does not use mercury. 【Low Heat Generation】Does not get as hot as fluorescent lamps, ensuring safety. 【Insect Repellent】Emits very little ultraviolet light, preventing pests from being attracted to and invading the area around the panel. 【Impact Resistance】Completely free of glass, making it safe from vibrations during transport and shocks during installation. 【Compact】Small and simple design, easy to install in panels, and lightweight. 【Brighter】Achieves about 1.5 times the brightness of a fluorescent lamp (FL10W). (Model CLED-1004) 【Long Size】Long size equivalent to a 20W straight fluorescent lamp, providing even brighter illumination in the panel. (Model CLED-1009) *For more details, please refer to the catalog or feel free to contact us.*

• LED lighting

【Long Lifespan】It has a lifespan about five times longer than conventional fluorescent lamps. 【Energy Saving】It consumes about half the power compared to conventional fluorescent lamps. 【ECO】It is a clean lighting solution that does not use mercury. 【Low Heat Generation】It does not get as hot as fluorescent lamps, making it safe. 【Insect Repellent】It emits very little ultraviolet light, preventing pests from being attracted to the panel and blocking their entry. 【Compact】With a small and simple design, it is easy to install in the panel and is lightweight. 【Low Noise】It is designed to minimize radiated and conducted noise. 【Flexible Installation】Since it can be mounted with a magnetic sheet, it can be illuminated from the top of the panel as well as from the sides or below. *For more details, please refer to the catalog or feel free to contact us.*

• LED lighting

The "Waterproof LED Solar Lantern" handled by Shinohara Electric uses solar cells and lithium-ion batteries, allowing for repeated charging. Charging is as simple as placing it in sunlight on a sunny day! It fully charges in 8 hours of direct sunlight and provides continuous lighting for 6 to 12 hours. Additionally, we have newly added the air-inflatable LED solar light, Empowered + mobile charger, which supports USB fast charging. The lightweight, compact, and waterproof Empowered is also suitable for outdoor activities and disaster preparedness. 【Features】 ■ Inflatable like a beach ball for use ■ Charging is simply done by placing it in direct sunlight on a sunny day ■ Rechargeable lithium-ion battery for repeated use ■ Patent registered (Patent No. 5898386) *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting

【Features】 1. Excellent gas decomposition performance achieved through a uniquely developed photocatalytic filter. 2. The gas decomposition capability of the photocatalytic filter is restored by washing with water and air drying. 3. No need for filter replacement, making it environmentally friendly and gentle on the Earth. 【Applicable Corrosive Gases】 - Hydrogen sulfide (H2S) - Sulfur dioxide (SO2) - Nitrogen oxides (NOx) For more details, please refer to the catalog or feel free to contact us.

• Distribution Board