ナセル List of Products and Services

The PMC66-SIO4BXR is a 4-channel serial interface card that provides high-speed, full-duplex, multi-protocol serial functionality for PMC applications. It combines a multi-protocol dual universal serial controller, deep external FIFO, and software-selectable multi-protocol transceivers to offer four completely independent synchronous/asynchronous serial channels. With these features and a high-performance 66MHz PCI interface engine, the PMC66-SIO4BXR delivers exceptional performance as a serial interface card.

• Embedded Board Computers

Brandywine Communications' CPCI-SyncClock32 provides accurate time to the host computer with zero latency via the cPCI bus. The onboard microprocessor automatically synchronizes the clock to the reference signal input. The reference signal input can be 1PPS, IRIG, or NASA time code, with optional GPS or HaveQuick. The clock can run freely and can be set by commands from the host via the cPCI bus. The onboard clock accepts IRIG A, B, or NASA36 inputs and accepts user-input reference signal delay information. An IRIGB code generator is also included.

• Embedded Board Computers

Brandywine Communications' XMC-SyncClock32 is a high-performance switched mezzanine card (XMC) module that provides accurate time to the host computer without delay. The onboard microprocessor automatically synchronizes the clock to the reference signal input. The reference signal inputs processed in the standard PMC configuration include IRIG A and B, NASA 36, and 1 PPS. Additionally, the clock can be set using commands from the host computer, and the onboard oscillator can be freely run using it as a time reference.

• Embedded Board Computers

Brandywine Communications' PMC-SyncClock32 is a high-performance mezzanine card (PMC) module that provides accurate time to the host computer without delay. The onboard microprocessor automatically synchronizes the clock to the reference signal input. The reference signal inputs processed in the standard configuration of the PMC include IRIG A and B, NASA 36, and 1 PPS. Additionally, the clock can be set using commands from the host computer, and the onboard oscillator can be used as a time reference for free-running operation.

• Embedded Board Computers

The VME635091-SYNCCLOCK from Brandywine Communications provides high-precision time and frequency references for host computers and peripheral data acquisition systems. The time is typically obtained from time code signals such as IRIG B and is displayed on the front panel's LED digits (hours, minutes, seconds). At the core of the module's operation is a disciplined 10MHz oscillator and a 100-nanosecond clock. The current time (in days to 100 nanoseconds) is accessible with zero delay via the bus, allowing for very fast time requests. It can be used as a replacement for the TTM635VME-91.

• Embedded Board Computers

Brandywine Communications' VME-SyncClock32 provides zero-delay high-precision time to the host computer via the VME bus. The onboard microprocessor automatically synchronizes the clock to the reference signal input. The reference signal inputs include 1 PPS, IRIG A or B, and NASA 36 time code. GPS and Have Quick inputs are available as options. The clock can free-run and can be set by commands from the host via the VME bus.

• Embedded Board Computers

The AWS EVO is equipped with a high-end 8-core 11th generation Intel Xeon W processor (Tiger Lake) or a powerful Hexa-Core 9th generation Intel Xeon E processor (Coffee Lake Refresh) and 32GB of DDR4 dual-channel memory, providing excellent overall performance. It features three independent video output ports (2x HDMI + 1x VGA), and the input/output ports include audio, 4x Gigabit Ethernet ports, 2x USB 3.0 ports, 4x USB 2.0 ports, PS/2, 4x COM ports, and 2x SATA 6Gb/s ports (with RAID support). Optimized for SWaP-C, it has a fanless design that employs conduction cooling. It is compliant with MIL-STD-810G certification and RTCA/DO-160G. ■ Japanese technical documents on MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• Industrial PCs

The GAP-145P-S8 features a dual-socket 5th generation Intel Xeon / 4th generation Intel Xeon Scalable processor, providing a balanced architecture with built-in AI acceleration and advanced security features. It is certified to MIL-STD-810F for temperature and shock, and MIL-STD-167-1A for vibration, with optional compliance to MIL-STD-461. MIL-GRADE connectors can be equipped for I/O connectors and power input upon request. Specific thermal or mechanical environmental stress tests can be conducted for all server configurations upon request. ■ Japanese technical documentation on MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• server

The GAP-145F-S8 features dual-socket 5th generation Intel Xeon / 4th generation Intel Xeon Scalable processors, providing a balanced architecture with built-in AI acceleration and advanced security features. It is certified to MIL-STD-810F for temperature and shock, and MIL-STD-167-1A for vibration, with optional compliance to MIL-STD-461. MIL-GRADE connectors can be equipped for I/O connectors and power input upon request. Specific thermal or mechanical environmental stress tests can be conducted on all server configurations upon request. ■ Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• server

The GAP-151R-S8 features a dual-socket 5th generation Intel Xeon / 4th generation Intel Xeon Scalable processor, providing a balanced architecture with built-in AI acceleration and advanced security features. It is certified to MIL-STD-810F for temperature and shock, and MIL-STD-167-1A for vibration, with optional compliance to MIL-STD-461. MIL-GRADE connectors can be equipped for I/O connectors and power input upon request. Specific thermal or mechanical environmental stress tests can be conducted on all server configurations upon request. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• server

The GAP-345P-S7 features a balanced architecture equipped with a single-socket and dual-socket 3rd generation Intel Xeon Scalable processors (Ice Lake), built-in AI acceleration, and advanced security features, offering up to 4TB of DDR4-3200 RAM, 64 lanes of PCIe Gen4 per CPU, and 7% higher inter-socket bandwidth. It is certified to MIL-STD-810F for temperature and shock, and MIL-STD-167-1A for vibration, with optional compliance to MIL-STD-461. MIL-GRADE connectors can be equipped for I/O connectors and power input upon request. Specific thermal or mechanical environmental stress tests can be conducted on all server configurations upon request. ■ Japanese technical documents on MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• server

The GAP-351R-S7 is equipped with third-generation Intel Xeon Scalable processors (Ice Lake) in single-socket and dual-socket configurations, featuring a balanced architecture with built-in AI acceleration and advanced security functions, supporting up to 4TB of DDR4-3200 RAM, 64 lanes of PCIe Gen4 per CPU, and providing 7% higher inter-socket bandwidth. It is certified to MIL-STD-810F for temperature and shock resistance, and to MIL-STD-167-1A for vibration resistance, with optional compliance to MIL-STD-461. MIL-GRADE connectors can be equipped for I/O connectors and power input upon request. Specific thermal or mechanical environmental stress tests can be conducted on all server configurations upon request. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• server

The AC/DC adapter AC300 is a new load design based on LLC topology that supports a maximum power of 300W. The LLC resonant topology enables zero-voltage switching of the main switch, significantly reducing switching losses. Additionally, synchronous rectification control on the secondary side improves efficiency. Using an LLC resonant converter, efficiencies of over 98% can be achieved. In addition to the above, this MIL power supply features the best EMC characteristics compliant with MIL-STD-461G and operates within a frequency range of 50Hz, 60Hz, and 400Hz. The hardened and powder-coated aluminum chassis enhances dust resistance, vibration resistance, and water resistance, meeting the environmental requirements of MIL-STD-810H. Connectors on both the AC and DC sides can be freely selected. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• power supply

The DC-DC converter series ROD Modular offers unprecedented versatility as an external vehicle converter. It is available in two power classes, 120W and 200W, both in the same form factor, with a common vehicle battery voltage of 24VDC. The output voltage (VOUT) is factory-set to 12V, 15V, 19V, 24V, 28V, or 48V. Depending on customer requirements, it is also possible to achieve two outputs, such as operating a laptop and a display simultaneously through the converter. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• converter

27-inch, 3840x2160 resolution 4K display! ■ A manufacturer specializing in rugged displays ■ Numerous adoption records in the U.S. Army, Navy, and Air Force ■ Compliant with MIL-STD-810 and MIL-STD-461, high environmental resistance ■ Flexible customization options for connector and button placement ■ Japanese technical documentation on MIL-STD-810 environmental standards and MIL-STD-461/IP overview is available. If you would like to see it, please contact sales@nacelle.co.jp.

• LCD display

IntelliPower's systems utilize specially designed circuit boards, chassis, components, and construction techniques for harsh environments, specifically for applications involving extreme heat, shock, and vibration. The FA00105 is a 2U-sized power conditioner equipped with frequency conversion and power factor correction capabilities. IntelliPower's standard construction methods enable compliance with numerous performance standards for specific models and product families. Since IntelliPower products are designed and manufactured in the United States, they offer a short lead time from design to shipment and provide an unparalleled level of personalized service in the market.

• Power Monitoring Equipment

IntelliPower's systems utilize circuit boards, chassis, components, and construction techniques specifically designed for harsh environments, namely applications involving extreme heat, shock, and vibration. The robust uninterruptible power supply FA10459 employs high-efficiency power switching and galvanic isolation, providing ideal electrical output performance. IntelliPower's standard construction methods enable compliance with numerous performance standards for specific models and product families. Since IntelliPower products are designed and manufactured in the United States, they offer short lead times from design to shipment and provide an unparalleled level of personalized service in the market.

• UPS/Uninterruptible Power Supply

The Mildef 19'/2 series is a military specification that excels in robustness and is a space-saving size that fits two units in a 19-inch rack. The PWR3121 provides one AC input and four DC outputs, delivering a total output of 480W. It is an ideal power distribution unit for small systems connected to the AC input. It features IP65 dust and water resistance. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• power supply
• Other network tools

Haivision Stryke is a tactical video processor designed to enhance video wall solutions deployed in mission-critical and harsh environments. With powerful video processing capabilities and intuitive software, it provides unparalleled situational awareness and decision-making capabilities. The robustness and portability of the Stryke processor make it an ideal solution for teams that need to share common operational images in real-time within robust shelters, tactical command centers, and mobile operation centers.

• Image Processing Equipment

The ARD24 is a 31.5-inch full HD rugged display designed for command and control applications that require a large display area. The extremely small bezel size, flexible mounting configurations, configurable I/O, and universal AC/DC power supply of the ARD24 make it a valuable solution for many mission-critical applications. Customization options are available for MIL connectors, switch and button positions, and more. ■ Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp. ■

• LCD display

The ARD32 is a 31.5-inch full HD rugged display designed for command and control applications that require a large display area. The extremely small bezel size, flexible mounting configurations, configurable I/O, and universal AC/DC power supply of the ARD32 make it a valuable solution for many mission-critical applications. Customization options are available for MIL connectors, switch and button positions, and more. ■ Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp. ■

• LCD display

The ARD43 is a 43-inch UHD rugged display designed for command and control applications that require a large display area. The extremely small bezel size, flexible mounting configurations, configurable I/O, and universal AC/DC power supply of the ARD43 make it a valuable solution for many mission-critical applications. Customization options are available for MIL connectors, switch positions, and button placements. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• LCD display

The CR-7000 is a fully rugged managed Gigabit Ethernet switch specially designed to operate reliably in harsh military environments (altitude, shock, vibration, wide temperature ranges, humidity, exposure to dust and water, noisy EMI, dirty power, etc.). This platform is a switch for military applications constrained by space, weight, power, and cost (SWaP-C) on military vehicles.

• Routers, Switches, and Hubs

The Mildef 19'/2 series is a rugged military-grade IT equipment unit that fits two units in a space-saving size for a 19-inch rack. The RM2139 integrates the Cisco ESS3300 switch and ESR6300 router into a single unit. As a result, it has become an excellent network product that offers high performance levels and a wide range of routing and switching capabilities, all fitting within a 1U half-rack unit. It features IP65 dust and water resistance, and customization options allow for the selection of MIL connectors or commercial connectors. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Routers, Switches, and Hubs

Equipped with Intel Core i9/i7/i5/i3 processors (14th generation, code name: RPL-S Refresh/RPL-S/ADL-S), it achieves excellent flexibility and scalability for AI computing. It can supply power to graphics cards up to 200W, features up to five 2.5G LAN ports (four of which support PoE+), and supports two DDR5 4800MHz memory modules, expandable up to 64GB (ECC memory option available). An optional X-code M12 connector specification is also available, and you can consider equipping it with up to four PCIe expansion slots.

• Industrial PCs

MANTIS is a highly integrated and robust monitoring computer that provides all the hardware necessary for a multi-user mission system in a single unit. MANTIS offers integrators a single line replaceable unit (LRU) that includes dual Intel PCs, a 4-channel Haivision HD network video encoder, and a 5-port gigabit Ethernet switch. All of these components are housed in a rugged and compact single unit. With complete internal connectivity, MANTIS can provide video acquisition and two independent operator workstations without the need for additional hardware. You simply connect the HD-SDI video feed from the camera and the input from the touchscreen monitor. ■ Japanese technical documentation on MIL-STD-810 environmental standards, MIL-STD-461, and IP overview is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• Industrial PCs

U/HDCAM/MIC is a fully integrated airborne video camera with an area microphone, offering Ultra HD (4K) resolution. It is the ideal solution for video/image cockpit needs, providing an area microphone and Full HD or Ultra HD 4K video camera resolution in the same box. The cockpit camera boasts approximately 2 megapixels or 8.51 megapixels, delivering excellent Full HD or Ultra HD image quality. It is built to withstand airborne use and is perfect for the image data recording needs of ED-112/155 AIRS CLASS A, B, C, D, and E.

• Color camera

J-Squared's TRAX series is a highly reliable and versatile computing system designed to handle mission-critical applications. The TRAX computer features a conduction cooling system and allows for customization with either MIL connectors or commercial connectors. The TRAX-25 can accommodate multiple Intel processors such as i3, i7, and XEON with up to six cores. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• Industrial PCs

Using the IP54 keyboard allows you to start working without any hassle. The IP54 keyboard is robust enough for the harshest environments, comes in multiple language versions, and features an integrated trackpoint that eliminates the need for a separate mouse. It is also compatible with any PC and has a backlight that makes it easy to use in dark environments, providing a hassle-free solution that allows you to focus on the situation at hand. ■ Japanese technical documents on MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• keyboard

The KBD1100 series is a military-grade rugged aluminum machined keyboard designed for military environments where reliability and performance are key. It features two USB interfaces that support up to two computer sources, along with a front button to switch between Source 1 and Source 2, optimizing the operator's SWaP and mission management. The KBD1106 is designed for vehicles and includes six mounting holes for surface installation and a sealed 38 mm built-in trackball pointing device. The trackball is equipped with stainless steel left and right click buttons. It has an IP65 dust and water resistance rating, and customization options allow for the selection of MIL connectors or commercial connectors. ■ Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp■

• keyboard

All MID displays are compatible with the MilDefs modular computer (MCS series) through the standard slot on the back of the unit. The computer module can be removed when not in operation for secure storage of classified information, training, upgrades, and software maintenance. Additionally, the modular design allows for mid-life upgrades of the computer without upgrading the display itself. It has an IP67 dust and water resistance rating. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• Industrial PCs

All MCS series units operate as panel PCs when connected to the MilDef MID display. MilDef's MCS series computers reduce lifecycle costs compared to existing systems. By only replacing the CPU unit, system modernization is easily achievable even over a long lifecycle. *No changes to cables, enclosures, or mounts are required. The MCS1101 features a powerful Intel Core i7 processor in a standardized form factor, delivering high performance with a small footprint. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp■

• Industrial PCs

The MSP163 provides gigabit switching on the palm of your hand. It can withstand extreme temperatures and has an IP67 dust and water resistance rating. Its compact and lightweight design allows soldiers to wear it, pack it in a backpack, or attach it to a drone. ■Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp■

• Routers, Switches, and Hubs

Fiber Extender offers high-performance DVI and USB extenders in a custom form factor. The KSW4101 remote extender is designed to work in conjunction with the local KSW4102. It is optimized to keep size, weight, and power (SWaP) low to meet industry requirements without sacrificing reliability, robustness, or performance. With IP65 dust and water resistance, it allows for customization with either MIL connectors or commercial connectors. ■ Japanese technical documents on MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• Industrial PCs

The Mildef 19'/2 series is a rugged military-grade IT equipment unit that fits two units in a space-saving size for a 19-inch rack. The KSW2101 receives one DVI input and transmits it to four DVI outputs. The system controller communicates EDID information, which can be modified by the user via the service port. The unit automatically powers on when connected to a power source. It features IP65 dust and water resistance, and customization options allow for the selection of MIL connectors or commercial connectors. ■ Japanese technical documents for MIL-STD-810, MIL-STD-461, and IP standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• Industrial PCs

The Mildef 19'/2 series is a rugged military-grade IT equipment unit that fits two units in a space-saving size for a 19-inch rack. The CS2291 is a high-performance computer equipped with up to 12 Ethernet ports, making it ideal as a platform for router and switch applications. It is optimized to keep size, weight, and power (SWaP) low to meet industry requirements without sacrificing reliability, ruggedness, or performance. It features IP65 dust and water resistance, and customization options allow for the selection of MIL connectors or commercial connectors. ■ Japanese technical documentation for MIL-STD-810, MIL-STD-461, and IP standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Industrial PCs

The ComEth40xxe line features a highly integrated system-on-chip (SoC) from Marvell equipped with a programmable packet processor, providing complete backward compatibility with previous generation products, as well as a rich number of 10/40 Gigabit Ethernet ports, making it unique compared to other VME Ethernet switch products. The ComEth40xxe matrix, combined with an independent management processor, is controlled by the proven Interface Concept network management application, Switchware. Switchware supports a wide range of Ethernet protocols and features an easy-to-use graphical user interface (GUI). In addition to non-flash devices, the use of removable flash disks allows for the storage of switch configuration files and logs, providing users with flexibility and the ability to sanitize as needed.

• Embedded Board Computers

The ComEth4420e's expansion/data plane PCIe lanes are generated by a high-performance non-blocking switch that provides non-transparent functionality at each port. It supports partitioning, upstream, downstream, and non-transparent port modes, making it an ideal switch for integrators seeking to control high data flow in a centralized architecture that includes multiple NT endpoints.

• Embedded Board Computers

A 6U VPX CPU board equipped with Intel Xeon, suitable for digital signal processing. The IC-INT-VPX6d is the result of Interface Concept's experience and expertise in the field of high-performance embedded computing (HPEC). Leveraging the latest Intel 14nm Xeon extensions and the intercommunication capabilities provided by the OpenVPX standard, the IC-INT-VPX6d is currently the most comprehensive dual Intel processor design for applications requiring the highest processing power and "controlled" power consumption. In the same spirit, IC provides security to users with its own bootloader, ensuring consistent support as expected.

• Embedded Board Computers

The IC-PPC-VMEb is based on one or two QorIQ T2081 (or T1042) processors, providing unparalleled performance for VME legacy applications and delivering a robust and highly secure solution. It replaces the IC-De6-VMEb while ensuring compatibility with existing equipment and enhancing embedded computing capabilities. The IC-PPC-VMEb board offers a flexible combination of interfaces, providing a versatile open platform in a single-slot VME to optimize weight, size, power, and cost.

• Embedded Board Computers

The IC-ARM-VPX3a is a low-power 3U VPX single-board computer that is ideal for applications requiring command and control functions for sensor systems and high multi-threaded performance (target tracking or C4ISR). ■ Japanese technical documents on OpenVPX and SOSA are available. If you would like to see them, please contact sales@nacelle.co.jp. Alternatively, you can also download them from the catalog page.

• Embedded Board Computers

PNT (Position/Navigation/Timing) cards optimized for defense applications. The PR A11/6sd-RCx provides resilient PNT data for sensor-based solutions used in electronic warfare and intelligence, surveillance, and reconnaissance applications. ■ Japanese technical documentation for OpenVPX and SOSA is available. If you would like to see it, please contact sales@nacelle.co.jp. Alternatively, it can also be downloaded from the catalog page.

• Embedded Board Computers

A 3U cPCI CPU board ideal for defense applications. The TP 792/31d-RC is designed for long-life applications in the defense, industrial, and scientific markets. It is designed to be backward compatible with the common TP 702/msd-RC products, allowing for migration to higher performance and longer life deployments. The board support package for Concurrent products is compatible with Windows, Linux, and VxWorks.

• Embedded Board Computers

A 6U VME processor board ideal for defense applications. Rhea is a low-power VME board designed for long-life applications, equipped with a wide range of I/O interfaces. With both 4-core and 2-core processor options, it allows for optimization of both performance and power. The 16GB of DRAM with built-in error correction ensures accurate data storage, enhances reliability, and improves memory integrity. The I/O interfaces, including SATA, USB, Ethernet, graphics, GPIO, audio, and serial, support various legacy connections by default, catering to a wide range of needs. The board support package for Concurrent products is compatible with Windows, Linux, and VxWorks.

• Embedded Board Computers

A 3U VPX graphics/GPGPU card ideal for defense applications. The Condor GR2S-RTX5000 is a robust OpenVPX 3U graphics/GPGPU card based on the NVIDIA Turing architecture and NVIDIA RTX™ platform. With excellent performance in GPGPU computing, AI inference, deep learning, and sensor processing, this card is perfect for data science applications such as ISR (Intelligence, Surveillance, Reconnaissance), EW (Electronic Warfare), DSP (Digital Signal Processing), and DVE (Degraded Visual Environment). ■ Technical documentation in Japanese for OpenVPX and SOSA is available. If you would like to see it, please contact sales@nacelle.co.jp. Alternatively, it can also be downloaded from the catalog page.

• Embedded Board Computers