MONOVATE(旧：日東金属工業) List of Products and Services

- It is made entirely of stainless steel, excelling in shock resistance, heat resistance, and light shielding. - The moderate weight enhances stability, making it less likely to tip over even when empty. - The interior features a straight structure without any bumps, providing excellent discharge and cleaning properties. - The inside of the cap has a PTFE gasket. - It has an easy-to-open screw cap. - The side of the cap is knurled, allowing for a non-slip opening and closing. - Available in three capacities: 20ml, 50ml, and 100ml. - It can be sterilized in an autoclave. - Marking, such as product names, is available as an option. - Custom manufacturing is also available.

• Stainless steel utensils and containers

This is a sight glass that can be connected to flanges of existing equipment. - It is a sight glass (integrated type) based on the 【NMB】 model with a helical connection, designed for flange connection. - By installing it on the flange of existing equipment, you can check the internal condition of the container without opening the lid. - The glass does not fall off when removing the sight glass from the container, ensuring safety. - It is a highly hygienic sight glass that can be fully disassembled, cleaned, and sterilized. - The wetted parts are made of SUS316L, which has excellent corrosion resistance. - The window section uses impact-resistant heat-treated glass, making it suitable for use as a sight glass for Fire Law No. 20 tanks. * When using it for a No. 20 tank, please be sure to check with the fire department of the municipality where the container is installed for approval.

• stainless

A sight glass that can be connected to existing equipment flanges. It comes with a wiper that ensures visibility even if the window fogs up due to steam or splashes of contents. - This sight glass is based on the integrated 【NMBW】 wiper-equipped model with a Heilur connection, modified for flange connection. - By turning the handle, the inner wiper blade rotates, allowing you to wipe away dirt and water droplets. - By installing it on the flange of existing equipment, you can check the internal condition of the container without opening the lid. - The glass does not fall off when removing the sight glass from the container, ensuring safety. - The wetted parts are made of SUS316L, which has excellent corrosion resistance. - There is also a type without a wiper, 【NMB-5K/10K】.

• stainless

- A camera is installed in the peephole, allowing for the internal conditions of the container to be photographed and recorded. - It is suitable for large tanks that cannot be viewed from the inside or when monitoring the interior of a container from a different location. - If there is an internet connection, it can be connected to smartphones, tablets, or computers for real-time monitoring. - Multiple cameras can be registered to a single device (or a single app), enabling remote management of multiple containers. - The peephole is easy to attach and detach due to the helical connection, and can be quickly installed if the container lid has a 4S helical.

• Stainless steel utensils and containers

- You can insert and remove the included clear case (card case) from the top of the holder. - It is ideal for document management such as identifying contents, process management, and manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - It comes with a cover lid to prevent dust and other particles from entering the container. - It features a dual handle type that provides a secure grip. - It is possible to change the position and specifications of the holder or to attach it to custom-made containers. - There are products with different types of lids and handles, so you can choose according to your needs.

• Stainless steel utensils and containers

Product Name: Sealed Container with Card Holder (Clip Type) [CTH-CZ] - The included clear case (card case) can be inserted and removed from the top of the holder. - Ideal for document management such as identifying contents, process management, and manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - Easily sealed with a clip, preventing spillage of contents and the intrusion of dust into the container during transport. - The gasket is made of silicone rubber compliant with food sanitation laws. - Features a sturdy dual-handle design for easy carrying. - Customization options are available, including changes to the holder's position and specifications, gasket material, and attachment to custom containers. - There are products with different types of lids and handles, allowing you to choose based on your needs.

• Stainless steel utensils and containers

Product Name: Sealed Container with Card Holder (Band Type) [CTL-CZ] - The included clear case (card case) can be inserted and removed from the top of the holder. - It is ideal for identifying contents, process management, and managing documents such as manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - The included lever band allows for easy temporary sealing, preventing spillage of contents during transport and entry of dust into the container. - The gasket is made of silicone rubber compliant with food sanitation laws. - It features a dual handle type for a secure grip. - Changes to the position and specifications of the holder, material changes for the gasket, and installation on custom-made containers are possible. - There are products with different types of lids and handles available, allowing you to choose according to your needs.

• Stainless steel utensils and containers

Product Name: Hanging Card Holder with Universal Container [STB-CZ] - The included clear case (card case) can be inserted and removed from the top of the holder. - It is ideal for identifying contents, process management, and managing documents such as manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - It comes with a cover lid to prevent dust and other debris from entering the container. - It features a hanging handle type that can be carried with one hand. - It is possible to change the position and specifications of the holder or attach it to custom-made containers. - There are products with different types of lids and handles, allowing you to choose according to your needs.

• Stainless steel utensils and containers

Product Name: Hanging Card Holder with Sealed Container (Clip Type) [CTB-CZ] - The included clear case (card case) can be inserted and removed from the top of the holder. - Ideal for document management such as identifying contents, process management, and manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - Easily sealed with a clip, preventing spillage of contents and intrusion of dust into the container during transport. - The gasket is made of silicone rubber compliant with food sanitation laws. - It features a hanging handle type that can be carried with one hand. - Customization options are available for changing the position and specifications of the holder, the material of the gasket, and for attaching to custom-made containers. - There are products with different types of lids and handles, allowing you to choose according to your needs.

• Stainless steel utensils and containers

Product Name: Hanging Card Holder with Sealed Container (Band Type) [CTLB-CZ] - The included clear case (card case) can be inserted and removed from the top of the holder. - Ideal for document management such as identifying contents, process management, and manufacturing instructions. - The bottom of the holder has a gap for drainage, making it difficult for cleaning liquids to accumulate. - The included lever band allows for easy temporary sealing, preventing spillage of contents and the intrusion of dust into the container during transport. - The gasket is made of silicone rubber compliant with food sanitation laws. - It features a hanging handle type that can be carried with one hand. - Changes to the position and specifications of the holder, material changes for the gasket, and installation on custom-made containers are possible. - There are also products with different types of lids and handles, allowing you to choose according to your needs.

• Stainless steel utensils and containers

The container adopts a dished head shape that excels in stirring efficiency. Additionally, it comes with a jacket that allows for temperature control. Features: - A selectable capacity lineup ranging from 35 to 150 liters. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents, whether heating or cooling. - The discharge port is equipped with a ball valve with a hygienic connection. - It has caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

The container adopts a dished shape that excels in stirring efficiency. Additionally, it comes with a jacket that allows for temperature control. Features: - A lineup of selectable capacities ranging from 35 to 150 liters. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents, either for heating or cooling. - The discharge outlet features a tank bottom ball valve with minimal dead space, allowing for quick opening and closing. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

The container adopts a dished head shape that excels in mixing efficiency. Additionally, it is equipped with a jacket for temperature control. Features: - A lineup of selectable capacities ranging from 35 to 150 liters. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents or cool them down. - The discharge outlet uses a tank bottom diaphragm valve with minimal dead space, which minimizes liquid residue and enhances cleanability. - Equipped with caster legs for easy mobility. - The mixer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

The container comes with a temperature-controlled jacket. The inner tank features a single taper design for smooth horizontal discharge. Features: - A selection of capacities ranging from 35 to 150 liters. - Water can be circulated in the jacket (outer tank) to maintain the temperature of the contents. - The discharge outlet is equipped with an LPS valve for a helical connection. - It has caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

- It comes with a stainless steel container, heater, stirrer, and valve. - It uses a water bath method to indirectly heat the contents and prevent sticking. - By heating while stirring, the contents can be heated evenly. - It can heat up to a maximum of 80°C. - The stirrer uses a "Bernoulli flow stirrer" that excels in suppressing foaming. - Compared to chillers (constant temperature water circulation devices), it is characterized by being "faster to heat," "cheaper," and "more compact." - The temperature of the contents can be adjusted through the linkage between the thermometer and the heater. - It comes with a level gauge that allows you to check the water level inside the jacket.

• tank

- A lineup of selectable capacities from 30 to 200 liters. - The container is a pressurized vessel that allows for pressurized stirring. - It has a pressure resistance specification of up to 0.18 MPa, making it suitable for stirring that involves pressure, such as degassing. - It features a flange open type that is secured with bolts. - The discharge outlet uses a ball valve with a Heli-connection. - It has caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

- A lineup of selectable capacities from 30 to 80 liters. - The container is a pressurized vessel that allows for pressurized stirring. - It is designed to withstand pressures up to 0.18 MPa, making it suitable for pressure-related stirring such as degassing. - It features a clamp band for securing a Huber open type. - The discharge outlet uses a ball valve connected to a Huber fitting. - Equipped with caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

- A lineup of selectable capacities ranging from 30 to 200 liters. - The container is a pressurized vessel with a jacket that allows for temperature control and pressurized stirring. - The main body of the container is designed to withstand pressures up to 0.18 MPa, making it suitable for pressure-related stirring such as degassing. - It features a flange open type that is secured with bolts. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents or for cooling. - The discharge outlet uses a ball valve with a hygienic connection. - Equipped with caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

- A lineup of selectable capacities ranging from 30 to 80 liters. - The container is a pressurized vessel with a jacket that allows for temperature control and pressurized stirring. - It is designed to withstand pressures up to 0.18 MPa, making it suitable for pressure-related stirring such as degassing. - It features a clamp band for securing the lid in an open type. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents or for cooling. - The discharge outlet uses a ball valve with a hygienic connection. - It has caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

Features - A lineup of selectable capacities ranging from 35 to 150 liters. - The container has a dished shape that excels in stirring efficiency. - The outlet uses a ball valve with a hygienic connection. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

Features - A lineup of selectable capacities from 35 to 150 liters. - The container has a dished shape that excels in stirring efficiency. - The discharge outlet uses a tank bottom ball valve with minimal dead space, allowing for quick opening and closing. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

Features - A lineup of selectable capacities ranging from 35 to 150 liters. - The container has a dished shape that excels in stirring efficiency. - The discharge outlet uses a tank bottom diaphragm valve with minimal liquid pooling. It is characterized by low liquid retention and excellent cleanability. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

Features - A lineup of selectable capacities from 35 to 150 liters. - The container adopts a single taper shape with a slanted bottom plate for smooth lateral discharge. - The discharge port is equipped with an LPS valve for a helical connection. - It has caster legs for easy mobility. - The mixer offers two connection methods and two types of motors (electric motor/air motor) to choose from.

• tank

- The container and mixer are integrated, allowing for easy and safe movement. - The container has a mirror plate shape that excels in mixing efficiency. - The discharge outlet features a tank bottom ball valve that has "minimal dead space inside the container" and "easy opening and closing operation." The tank bottom valve is characterized by a smooth connection between the discharge outlet and the container. Compared to a hygienic connection, it does not create small gaps, allowing the liquid flow to reach every corner during mixing, achieving efficient and uniform mixing. Additionally, it minimizes the retention of contents in the piping, enabling smooth discharge. - It comes with a split lid that is convenient for internal inspection and raw material input.

• tank

- The container and mixer are integrated, allowing for easy and safe movement. - The container has a dished bottom shape that excels in mixing efficiency. - A jacket has been installed for heating and cooling (insulation and refrigeration). - The discharge outlet features a tank bottom ball valve that has "minimal dead space inside the container" and "easy opening and closing operation." The tank bottom valve is characterized by a smooth connection between the discharge outlet and the container. Compared to a ferrule connection, it minimizes gaps, ensuring that liquid flows thoroughly during mixing, achieving efficient and uniform mixing. Additionally, it allows for smooth discharge as the contents are less likely to remain in the piping. - It comes with a split lid that is convenient for internal inspection and raw material loading.

• tank

- It is capable of stirring approximately 30 to 150 liters. - It employs a stirring body that excels in stirring without incorporating air. - It uses an aluminum electric motor that can stir at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a portable type that connects to the base with a clamp. - The stirrer can slide back and forth to adjust the stirring position.

• Mixer/agitator

- It is capable of stirring approximately 30 to 150 liters. - It uses a stirring body that excels in stirring without incorporating air. - An aluminum electric motor is used, capable of stirring at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a vertical type that connects to the lid of the container with a Helaur connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

• Mixer/agitator

- Capable of stirring approximately 30 to 150 liters. - Features a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Portable design with a clamp connection to the base. - The stirrer can slide back and forth to adjust the stirring position.

• Mixer/agitator

- Capable of stirring approximately 30 to 150 liters. - Utilizes a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Vertical type that connects to the container lid with a Heller connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

• Mixer/agitator

- The "Bernoulli Flow Stirrer" that can stir while suppressing foaming. We have received positive feedback from pharmaceutical manufacturers who have adopted it, saying, "We were able to reduce the time required for dissolution by 30%!" The "Bernoulli Flow Stirrer" can be selected according to usage, including models that can be used under sealed conditions, models suitable for explosion-proof areas, and cost-effective models. - Bernoulli Flow Stirring Unit / Temperature Control Unit / Pressure Control Unit [First Publication] The "Stirring Unit" series is a unit that combines basic components such as stainless steel containers, stirrers, and valves into one. The stirrer uses the "Bernoulli Flow Stirrer," making it our original stirring device. The "Bernoulli Flow Stirring Unit" is a simple unit specialized for stirring without temperature control or pressure adjustment. The "Bernoulli Flow Stirring Temperature Control Unit" is a unit with a jacketed container that allows for heating, dissolution, temperature uniformity, and cooling. The "Bernoulli Flow Stirring Pressure Control Unit" is a unit with a pressure-resistant container and stirrer that can be used for stirring that should not be exposed to air or involves defoaming. Other products we handle are also listed. Please take a look!

• tank

A stand that can be installed horizontally for measuring airborne bacteria in indoor environments. It is made of durable, rust-resistant all-stainless steel. - Can be used with standard φ90mm petri dishes. - The lower platform can be used as a lid holder. - Suitable for use in pharmaceutical, food, and cosmetic factories for "airborne bacteria count measurement." - The petri dish can be positioned 800mm above the floor. *Based on the Ministry of Health, Labour and Welfare notification regarding "Hygiene Standards for Bento and Side Dishes." - The height of the petri dish holder can be adjusted within the range of 600 to 800mm.

• Other measurement, recording and measuring instruments

A stand that can hold a HeLure connection type stirrer. It is convenient as a storage place for the stirrer before and after use. ◯ You can immediately place the stirrer removed from the container, reducing the burden of work. It has casters for easy movement. ◯ It comes with a drip tray, so even if liquid drips from the shaft, it won't make a mess around it. ◯ It reduces the risk of shaft bending caused by laying the stirrer flat. ◯ It is also convenient for replacing shafts and stirring bodies, as well as for maintenance work on the stirrer. ◯ A 4.5S HeLure connection stirrer can be installed.

• Mixer/agitator

This is a device that attaches lever band-type CTL-36 and 43 containers and rotates them to mix the contents. It can be used for mixing powders and granules in pharmaceutical manufacturing processes that cannot be done with a stirrer, as well as for seasoning food. Since there are no stirring blades or similar components, mixing can be done without damaging the materials. The containers are rotated and mixed while remaining sealed, eliminating concerns about foreign matter contamination. Because the containers are detachable, you can simply change the container to mix the next material without taking the time to clean and dry it. You can change the container for each type of content (i.e., dedicated containers), which helps prevent cross-contamination. *This product includes the mixing machine body and one lever band-type sealed container [CTL].

• Mixer/agitator

- There is no need to hold the hose during water injection or when pouring liquid materials. - You can perform other tasks while injecting water, which improves work efficiency. - It prevents losses caused by the hose falling or scattering due to the hose flailing. - You can choose the type of bracket according to your application. - We also offer fittings that can be attached to the end of the hose as an option. - If you want to avoid metal contact with the container, please choose the series with pads.

• hose

This is a container designed to quickly filter the solution or other materials introduced into it by creating a reduced pressure inside the container. By sucking out the air from the container through the suction port on the lid, the inside is brought to a reduced pressure state. By creating a vacuum inside the container, the solution introduced into the hopper is quickly sucked in and filtered. The feature is that it can filter much faster due to suction rather than relying on its own weight. Liquid is filtered through a catch net located between the hopper at the top of the container and the container itself. The opening rate of the hopper and catch net can be adjusted according to your preferences. Inside the outer container, which can be easily opened with a catch clip, there is an inner container. The inner container has a hanging handle, and it weighs about 1/2 to 1/3 of the outer container, making it easy to extract liquids and reducing the burden on the operator. Since this product is made entirely of stainless steel, unlike glass filters, there is no concern about breakage of the container, associated injury accidents, or contamination by foreign substances. By removing the hopper and closing the ferrule part to create a reduced pressure, it can also be used for simple vacuum degassing. In addition to the container body (outer container and inner container), a vacuum gauge is included.

• Filtration Equipment

〇 "Bernoulli Flow Stirrer" that can suppress foaming and air incorporation during mixing We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the time required for dissolution by 30%!" The "Bernoulli Flow Stirrer" can be selected according to usage, including models suitable for use under sealed conditions, in explosion-proof areas, and cost-effective models. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and blending without temperature control or pressure adjustments. - Bernoulli Flow Stirring Temperature Control Unit A unit equipped with a jacketed container that can handle heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that must avoid contact with air and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can create from just one unit.

• tank

A unit with a stainless steel container equipped with a weighing function. The frame comes with a base for installing a mixer. Unit contents: Stainless steel container, mobile frame, load cell, control panel. It can be used in various ways linked to "weighing": - Measuring the amount during raw material input - (In combination with an automatic valve) precise input and discharge of raw materials - (In combination with an automatic valve and mixer) precise input of mixing materials, mixing, and precise discharge The weight is measured using the load cell attached to the frame. The measurement results can be checked on the monitor of the control panel. It is designed to minimize measurement errors even when the container is shaking due to mixing, etc. The shape of the container is a dished type that excels in mixing efficiency. The container and frame can be separated, allowing the container to be removed for cleaning. *The photo is for illustration purposes. The actual specifications will be designed according to the customer's usage.

• Weighing Machine

〇 "Bernoulli Flow Stirrer" that can suppress foaming and air incorporation during mixing We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the dissolution time by 30%!" The "Bernoulli Flow Stirrer" can be selected based on usage, including models suitable for use under sealed conditions, in explosion-proof areas, and cost-effective options. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and blending without temperature control or pressure adjustment. - Bernoulli Flow Stirring Temperature Control Unit A unit equipped with a jacketed container that can handle heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that should not come into contact with air and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can create from just one unit.

• tank

〇 "Bernoulli Flow Stirrer" that suppresses foaming and air incorporation while stirring We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the time required for dissolution by 30%!" The "Bernoulli Flow Stirrer" can be selected according to usage, including models that can be used under sealed conditions, models suitable for explosion-proof areas, and cost-effective models. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and mixing without temperature control or pressure adjustment. - Bernoulli Flow Stirring Temperature Control Unit A unit with a jacketed container that can accommodate heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that requires avoiding air exposure and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can manufacture from just one unit.

• Mixer/agitator

A cover lid that can be opened and closed halfway / airtight lid. The lid is divided in half and connected with hinges for easy opening and closing. The opening is wide, making it easy to work with. Available with 1S and 1.5S handles. The size and type of fittings can be changed. *This product is designed to fit stainless steel containers made by Nitto Metal Industry.

• Stainless steel container

A cover lid that can be opened and closed halfway / airtight lid. It has a notch for a stirrer. The lid is divided in half and connected with hinges for easy opening and closing. The opening is wide for easier operation. It comes with a 1S and 1.5S helix. Baffles and temperature sensors can be connected. The size and type of fittings can be changed. *This product is designed to fit stainless steel containers made by Nitto Metal Industry.

• Stainless steel container

A cover lid that can be partially opened and closed / a sealed lid. The opening has no fasteners, allowing it to be opened immediately when needed. It is recommended for high-frequency opening and closing. Joints and notches can be added optionally as desired. *This product is designed to fit stainless steel containers made by Nitto Metal Industry Co., Ltd.

• Stainless steel container

The "Bernoulli Flow Stirrer" excels in agitation while minimizing foaming. It is a MONOVATE original stirrer characterized by "low foaming" and "powerful" stirring. If you are struggling with "foaming" or "insufficient stirring" in processes such as resin dissolution, chemical mixing, or paint stirring, please consider this stirrer. Customers who have adopted the Bernoulli Flow Stirrer have reported, "We were able to reduce the time required for dissolving raw materials by 30% (pharmaceutical manufacturer)." The Bernoulli Flow Stirrer comes in a wide range of options tailored to various applications, including cost-effective types and those with adjustable pressure. We also offer demo experiments for those who wish to confirm specifications before purchasing. As a manufacturer of stainless steel stirring tanks, we will select stirrers considering compatibility with tanks and contents. If you have any questions about which stirrer is suitable, please feel free to consult us.

• Mixer/agitator

◆We solve these problems with stainless steel hoppers! "Poor usability," "Size doesn't fit," "Contents don't flow out smoothly." ◆Here’s what sets our stainless steel hoppers apart "You can specify the height." You can specify the height of the hopper body and the leg height in 10mm increments. This allows you to choose according to the installation location and work content, leading to increased work efficiency. "You can choose the discharge outlet." You can select fittings (such as unions, sockets, nipples, flanges) that match the connection destination. This prevents issues where the "type of fitting differs" or the "size of fitting differs" from the connection destination. "You can choose the hopper angle." You can choose the hopper angle from 45° (eccentric), 60°, or 90°. The hopper angle can affect the flowability of the contents, and selecting the hopper angle according to the contents can lead to improved workability, time savings, and stable quality. For more details, please refer to the PDF.

• Stainless steel utensils and containers

- When introducing lightweight and easily airborne powder, it is installed at the top of the receiving container. - This reduces cleaning time after powder introduction and improves the hygiene environment of the workspace. - A large hood efficiently collects dust. The hood can be connected to a dust collector (sold separately). - By replacing the receiving container, it can accommodate multiple containers. - It is made of stainless steel, which is resistant to rust and hygienic. - It comes with caster legs for smooth movement and setup. The DC-L is designed based on the height of our containers placed on the floor. The DC-LH is designed based on the height of our containers placed on our carts. When using other manufacturers' containers, carts, or drums, please check the inner diameter and height of the hood and use one that fits. *Custom manufacturing is also possible.

• Stainless steel utensils and containers