Heating device for all-solid-state batteries {For secondary batteries and all-solid-state battery research and development!}

Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

• Secondary Cells/Batteries
• Lithium-ion battery
• Electric furnace

Opening up the material behavior under high-temperature stress of MAX1400℃ through in-situ micro-observation [CATY-T3H]

Real-time visualization of tensile and compressive behavior at ultra-high temperatures. In-situ observation enhances the accuracy and speed of high-temperature material development. Using an IR imaging furnace, it is possible to apply tensile or compressive loads while microscopically observing the surface state of the sample at high temperatures. This unique device allows for real-time observation of material behavior under high temperatures and stress. It is compact in size and can be used in various installation locations. 【Features】 - Dual swing crosshead: The specimen can be adjusted to a visible position. - Capable of high-speed heating up to 1400°C (depending on the shape and thermal capacity of the sample). - Flexible atmosphere: Vacuum chamber structure allows for stress measurement, low-cycle fatigue testing, and creep testing in gas flow or vacuum. - Realization of combined testing for thermal fatigue under stress and in-situ observation. 【Strongly supporting research and development of heat-resistant materials】 Experimental examples: Melting and solidification of metals and glass / Microstructural changes in metals / Sintering of ceramics, etc. Target materials: Metals / Semiconductors / Ceramics / Glass / Inorganic materials / Carbon, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Strength Testing Equipment

Utilizing the know-how of custom testing machines, we support testing and research with material testing machines such as [impact/fatigue durability/tensile/torsion testing machines, etc.].

▼Example of Testing Machine Manufacturing▼ The description is just one example. For details, please check individual pages or feel free to contact us. Customization is also available. *Special order testing machines and high-temperature on-site observation furnaces are featured on separate pages. 1. Impact Testing Machines - Charpy (pendulum/instrumented/semi-automatic/manual/automatic specimen replenishment) for metals, non-metals, and plastics - Drop weight impact (drop/falling weight/instrumented) for metals, non-metals, plastics, carbon fibers, textiles, and automotive-related materials 2. Fatigue Endurance Testing Machines - Creep (servo electronic/weight type/multi-station/with constant temperature bath) for metals, ceramics, carbon fibers, plastics, and wires - Pulley fatigue for metals and products - Torsional fatigue for metals and plastics - Friction wear (thrust/reciprocating sliding/rotational) for metals, ceramics, and carbon fibers, and plastics 3. Other Material Testing Machines - Universal testing machine (tensile/compression/bending) for metals, ceramics, carbon fibers, plastics, and wires - Static torsion testing machine for plastics, rubber, etc. ▼Material Testing Machines at Yokokura▼ Since our establishment in 1980, we have been manufacturing testing machines. We consistently handle the design, development, manufacturing, maintenance, inspection, and repair of equipment, and with the accumulated know-how and technology, we have produced testing machines for various customers across different industries.

• Testing Equipment and Devices
• Strength Testing Equipment
• Impact Test

Original testing machines and software creation for fuel, engines, wheels, suspension, spark plugs, etc. Leave it to us! Please let us know your testing requirements!

Our company has a track record of creating testing machines related to the following. If you have any requests regarding other testing machines, please feel free to contact us. [ Fuel-related ] Injector durability device for poor fuel Fuel pump high-temperature durability testing device Fuel pump durability testing device Fuel pump flow measurement device Fuel pump and SIFS performance measurement device Direct injection Malvern bench [ Engine-related ] Valve seat cold and heat testing machine Valve guide sliding testing machine Exhaust system fastening part cold and heat fatigue testing machine Durability testing machine related Mud water durability testing machine Boot durability testing machine CVJ durability testing machine Propeller boot durability testing machine Rack boot high and low temperature durability testing machine [ Wheel and suspension-related ] Wheel rotation bending testing machine (VIA specification) Wheel drop impact testing machine (JIS/ISO) Drum durability testing machine Front fork friction testing machine Wheel lateral destruction measurement testing machine Testing machine for suspension and steering [ Spark plug-related ] SP heating load life testing machine SP dielectric strength testing machine For other achievements, please contact us.

• Testing Equipment and Devices
• Strength Testing Equipment
• Analytical Equipment and Devices

Because we have the know-how for manufacturing test equipment, we can fulfill custom test requests as desired. We receive many production requests mainly for material/product development, research, and testing.

【Examples of Custom Test Equipment】 We manufacture test equipment tailored to the diverse needs of various customers across industries, and here are some examples of the test equipment we have produced. ■ Bearing-related ■ Furniture-related ■ Large-scale synchrotron radiation-related While the items we can showcase are limited, we produce a wide variety of test equipment. Why not consider creating a one-of-a-kind test machine utilizing our expertise in materials testing? [Examples of Materials Testing Equipment] Impact testing machines (Charpy/Dropping weight/Falling drop)/Fatigue endurance testing machines (Creep/Pulley)/Friction and wear (Thrust/Reciprocating sliding/Rotating)/Universal testing machines/Static torsion testing machines 【Custom Test Equipment at Yokokura】 Since 1980, we have been creating original test machines and devices alongside materials testing machines. We produce a variety of equipment for research and testing of unique new materials and products developed by our customers.

• Composite Materials
• Ceramics
• Testing Equipment and Devices

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.