"High-Temperature Heating, Tensile Compression, In-Situ Observation" Atmosphere control also / High-Temperature Tensile Compression Observation Device "CATY-T3H" Achieves space-saving with a compact tabletop design.

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

The "CATY-T3H SYSTEM" is a tabletop-sized high-temperature tensile observation device that allows for thermal fatigue testing while observing the state of the sample surface in real-time. It can be used with simple operations and supports high-temperature and high-speed heating. By adopting a dual-swing crosshead, it maintains the sample's position in the center even if the sample piece expands or contracts, thereby minimizing the displacement of the observation position. By combining with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Testing of not only metallic materials but also composite materials of surface-mounted components is possible. ■ Stress measurement, low-cycle fatigue testing, and creep testing can be conducted in gas flow or vacuum conditions. ■ Realization of combined testing for thermal fatigue under stress and real-time observation. * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Strength Testing Equipment

High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

The representative heating observation IR imaging furnace from Mikyo Manufacturing has been equipped with a digital violet laser microscope. It enables clear microscopic observation in ultra-high temperature environments of up to 1800°C. Compared to conventional models, the resolution and brightness have improved by about two times*, allowing for observations with high magnification and high contrast. Please utilize it for research on the behavior of fine structures and material development under high temperatures in steel, non-ferrous metals, ceramics, secondary batteries, and more. *Compared to our conventional model "VL2000DX-SVF17SP" ◆ Key Points ◆ - High-resolution in-situ observation Obtaining high-resolution images under ultra-high temperatures - Realization of diverse observation conditions Rapid heating and rapid cooling up to 1800°C - Excellent operability and controllability High-speed image acquisition accurately linked to temperature By using the optional load mechanism module "SVF12FTC," observations can be conducted under stress loading (up to 5kN) at high temperatures. For more details, please contact us.

• Steel

Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

• Secondary Cells/Batteries
• Lithium-ion battery
• Electric furnace

Dear Sir/Madam, I hope this message finds you well and thriving. I would like to express my sincere gratitude for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period: ■ Summer Vacation Period From Saturday, August 8, 2026, to Sunday, August 16, 2026. We will resume normal operations on Monday, August 17, 2026. Inquiries received during the vacation period will be addressed sequentially after the start of business. We apologize for any inconvenience this may cause and appreciate your understanding.

What is a sealed product air leak test device? It is an air leak test device that inspects the airtightness, sealing performance, and waterproofness of electrical equipment and packaging containers (cosmetics, food). It tests for leaks in products such as smartphones, tablet devices, keyless switches, wristwatches, bottle containers, and cosmetic containers (eyeliner, mascara).

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.