Reverse bias test of power devices (up to 2000V)

It is possible to set bad standards (current values)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.

At AITES Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, if one device fails during the test, it will not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply of the device deemed faulty at the time of failure judgment. 【Features】 ■ Real-time monitoring of the leakage current during testing allows for understanding the degradation status of the device. ■ The independent power supply ensures that if one device fails during testing, it does not affect other devices. ■ The power supply of the device deemed faulty can be cut off at the time of failure judgment. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

Support for the difficulties in the development and evaluation of components, devices, and materials related to semiconductor products.

【Testing, Evaluation, Analysis】 　●Reliability Testing 　　■Temperature Cycle Testing 　　■Thermal Shock Testing 　　■High-Temperature Storage Testing 　　■Highly Accelerated Life Testing 　　■Preconditioning 　　■Hot Oil Testing 　　■In-situ Continuous Measurement 　　■Ion Migration Testing 　　■Electromigration Testing 　　■Test Consulting 　●Evaluation Testing 　　■Bond Strength Testing: Pull/Shear Testing 　　■Mechanical Strength Testing: Vibration/Shock/Fall Testing/Compression Strength/Shear Strength 　　■ESD/Latch Up/CDM Testing 　　■Electrical Characteristic Measurement 　　■Salt Spray Testing 　●Analysis 　　■X-ray Transmission Observation 　　■Ultrasonic Microscope Observation 　　■Luminescence Analysis (EMS/IR-OBIRCH) 　　■Scanning Electron Microscope (SEM) 　　■Transmission Electron Microscope (TEM) 　　■Surface Contamination Analysis (TOF-SIMS) 　　■Foreign Substance Analysis (FT-IR)

• Other contract services

In-Situ Continuous Measurement Reliability Evaluation Testing Service

In-situ continuous measurement reliability evaluation tests involve applying stress while measuring characteristics to conduct reliability assessments. ● Accurate understanding of failure time is possible In a read-out method where samples are taken from a stress environment at a fixed time, failure can only be understood at the timing of the read-out, making it impossible to know the exact failure occurrence time. In-situ measurement allows for an accurate understanding of failure time. ● Detection of recoverable failures is possible Recoverable failures can cause significant issues in the market. In most cases, the read-out method makes it nearly impossible to detect these recoverable failures, whereas in-situ measurement enables the detection of recoverable failures, allowing for accurate judgment and assessment. ● Monitoring of stress application conditions on samples is possible The stress application status and measurement data can be confirmed in real-time.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Contract Inspection

We thoroughly evaluate and verify power devices from every angle.

■Problem-Solving Ability Consulting that leads to solutions with knowledge and technology Supporting customer schedules with quick responses ■Investigative Ability Skills to pinpoint and visualize malfunctioning areas Deep insight and advanced, delicate sample processing techniques ■Specialized Equipment Liquid tank thermal shock testing at up to 180°C Power cycle testing essential for power semiconductors

• diode
• Transistor

This is a list of devices used for analysis, evaluation, and testing services at AITES.

Aites is a solution-oriented company that sincerely addresses customer challenges in cutting-edge industrial fields. We utilize various owned devices to provide optimal solutions. ■ Product Analysis / Defect Analysis / Failure Analysis Morphological observation, electrical characteristic measurement, defect analysis, failure analysis, sample processing ■ Reliability Evaluation Testing Reliability evaluation testing, ESD/latch-up testing, strength testing, optical characteristics ■ Physical Analysis / Chemical Analysis Physical analysis, surface analysis, chemical analysis

• Contract Analysis

We are publishing an overview of ion migration evaluation and the details of the testing conducted!

One of the reliability evaluation methods, the ion migration evaluation test, has become increasingly important as a pre-evaluation due to the transition of products towards being lighter, shorter, and smaller. This document presents an overview of ion migration evaluation and the details of the test implementation using an example of an evaluation test conducted at our company. We will also introduce the usefulness of the continuous measurement (In-Situ) equipment used in the evaluation tests. [Contents] ■ Introduction ■ Ion Migration ■ Ion Migration Evaluation Test ■ Evaluation Method ■ Evaluation Test Case ■ Conclusion ■ References *For more details, please refer to the PDF document or feel free to contact us.

• others

Contracting power cycle tests using a power cycle testing device! We will cooperate in improving quality along with failure analysis and assessment.

At Aites Co., Ltd., we offer contract power cycle testing using Siemens (Mentor) power cycle testing equipment. We can also handle the creation of various jigs necessary for the tests. Additionally, we accommodate various observations and measurements of power devices. We can capture changes before and after tests such as power cycle testing. 【Features】 ■ We can handle the creation of various jigs necessary for the tests. ■ We accommodate various observations and measurements of power devices. ■ We can capture changes before and after tests such as power cycle testing. *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Contract measurement
• Contract Inspection

Suitable for evaluation of die attach and TIM materials! We support everything from prototyping to evaluation.

At Aites Co., Ltd., we offer "Module Prototyping and Thermal Resistance Evaluation." In the evaluation of power devices and the materials used in power devices, measuring thermal resistance by actually assembling the device is an effective method for understanding performance. We handle everything from prototyping to evaluation. If you are interested, please feel free to consult with us. 【Features】 <Prototyping of Power Modules> ■ We provide a consistent, flexible, and cost-effective service from chip procurement to module assembly. ■ Suitable for evaluating die attach and TIM materials. <Transient Thermal Resistance Measurement> ■ Using T3Ster (power cycle testing device built-in) for power devices, we conduct measurements of transient thermal resistance, obtain structural functions, and perform thermal analysis. ■ Using that data, we can compare materials, calculate thermal resistance, and estimate defective areas. *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Contract measurement
• Contract Inspection

It is possible to apply up to 1000V in high temperature and high humidity environments for power devices! The degradation status of the device can also be monitored.

At AITES Co., Ltd., we offer "HAST testing for power devices." 【Features】 ■ Capable of conducting unsaturated vapor pressure tests with a maximum voltage of 1000V ■ Evaluation of metal wiring corrosion and migration through current flow under high temperature and high humidity conditions ■ Real-time monitoring during testing to assess sample degradation

• Contract Analysis
• Contract measurement
• Contract Inspection

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.