SEMICON Japan 2024 Exhibition

A high-output, high-stability LED light source device capable of mounting multiple modules of the same wavelength. Maximum high-power UV output of 80W, mercury-free.

ALE/2 is an LED ultraviolet irradiation device that achieves high output and high stability, surpassing conventional discharge lamps. It is equipped with up to four built-in LED wavelengths, allowing for multiple wavelength outputs. A significant difference from the ALE/1 in the ALE series is the ability to mount multiple modules of the same wavelength. Therefore, it is possible to output only the i-line or g-line at high intensity, making it suitable for semiconductor applications. The LED modules can be easily replaced, allowing for flexible adaptation to changes in applications.

• Stepper
• Other semiconductor manufacturing equipment

High-output, high-stability LED light source device. High-power UV output up to 15W, mercury-free, with selectable built-in LEDs.

This is a high-output, high-stability LED light source device that replaces conventional discharge lamps. It can accommodate up to five types of LEDs, allowing for output at multiple wavelengths. Additionally, the LED modules can be easily replaced, providing flexibility for changes in applications.

• Stepper
• Other semiconductor manufacturing equipment

Maximum 50W ultra-high output. LED irradiator as a replacement for mercury lamps. Usable for UV curing, semiconductor inspection equipment, and more.

This is a super high-output LED irradiation system that replaces conventional discharge lamps (mercury lamps). The ALE/1C is used by connecting two systems: the control system (CSS) and the exposure system (ESS). By splitting the system into two, we have achieved a compact design that is easy to integrate into equipment while maintaining high output. Additionally, the exposure system can be used in combination with various optical components such as light pipes and light guides. For a comparison of output between 1000W and 500W mercury lamps and the ALE/1Ct, please refer to the catalog.

• Stepper
• Other semiconductor manufacturing equipment

High-output, high-stability LED light source device. High-power UV output up to 30W, mercury-free, with selectable built-in LEDs.

This is a high-output, high-stability LED light source device that replaces conventional discharge lamps. It can accommodate up to five types of LEDs, allowing for output at multiple wavelengths. Additionally, the LED modules can be easily replaced, providing flexibility for changes in applications.

• Stepper
• Other semiconductor manufacturing equipment

LPP-EUV light source that achieves high brightness and low debris.

ISTEQ's TEUS series is an EUV light source that utilizes laser-produced plasma, achieving high brightness and low debris. Unlike conventional droplet targets, it prevents the adhesion of debris generated during plasma formation to the optical system.

• others

Covers UV to NIR from 350 to 1000 nm with a single device. Introduces light field technology. Provides high-resolution imaging data.

The "Hyperspectral Camera ULTRIS X20" is an innovative hyperspectral camera based on light field technology. It is equipped with a 20MP CMOS sensor, allowing for the acquisition of high-resolution data. The "ULTRIS X20" has an expanded measurement wavelength range compared to the conventional model "ULTRIS 20," now covering a wide range of wavelengths from 350 to 1000 nm, from ultraviolet to near-infrared, all in one device. 《 Features of ULTRIS X20 》 - Capable of capturing hyperspectral imaging data in video format - Measurement wavelength range: 350-1000 nm, 164 spectral bands - High resolution - 410×410 pixels - Compact (60 × 60 × 57 mm), lightweight (350 g) (standard model S20) - Robust housing compliant with IP standards - Capable of underwater shooting With its compact and lightweight design, it can be mounted on general drones. The 164 spectral bands and high spatial resolution of 410×410 pixels make it suitable for a wide range of applications, not only in laboratories and fields but also in UAV applications.

• Other inspection equipment and devices

Covers 350~1000nm with a single unit. A high-resolution, snapshot-type hyperspectral camera specifically designed for UAVs.

The "Hyperspectral Camera ULTRIS X20 Plus" is a hyperspectral camera designed specifically for UAVs, which adds a pan-sharpening method to the "ULTRIS X20," a hyperspectral camera based on light field technology. It has a wider measurement wavelength range than conventional models, capable of covering a broad spectrum from ultraviolet to near-infrared, specifically from 350 to 1000 nm, all with a single unit. **Features of ULTRIS X20 Plus:** - Capable of capturing hyperspectral imaging data in video format - Equipped with two imaging sensors - Adds a panchromatic sensor to the "ULTRIS X20" using light field technology - High resolution - Panchromatic resolution: 1880×1880 px, spectral resolution: 410×410 px (168,100 spectra) - Compact and lightweight (630g) The "ULTRIS X20 Plus" is a snapshot-type camera that can obtain a complete spectral data cube in seconds without scanning, making it suitable not only for UAV use but also for use as a video hyperspectral camera in laboratories and field settings.

• Other inspection equipment and devices

【Suitable for OEM】Ultra-compact and low-cost. A hyperspectral camera capable of video recording.

【Minimum Size of Video Hyperspectral Camera UTLRIS】 - Ultra-compact: 29×29×49 mm - Ultra-lightweight (126 g) - Snapshot-type hyperspectral camera based on light field technology. - Capable of video recording - Covers a wavelength range of 450–850 nm (VNIR region) Suitable for OEM with 【Ultra-compact & Lightweight】 × 【Low Price】 - Opens up new markets for hyperspectral imaging in various industrial fields such as food, industry, medical, and recycling. The ultra-compact and lightweight UTLRIS 5 is also suitable for use with UAS.

• Other inspection equipment and devices

Ultra-high sensitivity CCD camera corresponding to VUV, EUV, soft X-ray, and hard X-ray regions.

This is a super high-sensitivity CCD camera suitable for VUV, EUV, soft X-ray, and hard X-ray regions. It achieves a high signal-to-noise ratio (S/N ratio) through high-sensitivity CCD and cooling technology. It is capable of detecting extremely weak signals that cannot be measured with CMOS cameras. ■ Super High Sensitivity The CCD sensor achieves a high quantum efficiency of up to 98%, allowing for the measurement of weak signals. It realizes a high dynamic range with 18-bit digital output, enabling simultaneous measurement of strong and weak signals. The TE cooling system, which cools down to -100°C, achieves an extremely low dark current of 0.00015 e-/pixel/s. ■ High Performance as a Camera It can read out at a maximum frame rate of 5 MHz. It is equipped with multiple interfaces, including GigE and USB 3.0. Software and SDK for the camera are provided. ■ Ideal for Use in Vacuum Equipment It is compatible with CF flanges DN63, DN100, and DN160, making it easy to install in vacuum equipment. The design and materials of the camera provide resistance to 80-degree baking, allowing for use in UHV (Ultra High Vacuum) conditions.

• others

Ultra-high sensitivity CCD camera for VUV, EUV, and X-ray regions for use in vacuum chambers.

This is an ultra-high sensitivity CCD camera compatible with VUV, EUV, and X-ray regions that can be used in a vacuum chamber. Thanks to its high-sensitivity CCD and cooling technology, it achieves ultra-low noise and a high signal-to-noise ratio, enabling the detection of weak signals that cannot be measured with CMOS cameras. It features a stainless steel housing that minimizes outgassing to the extreme, allowing it to be used in UHV (Ultra High Vacuum) environments. The CCD cameras from greateyes possess the overwhelming characteristic of ultra-high sensitivity in the VUV, EUV, and X-ray regions while also exhibiting high performance as a camera, making them ideal for use in vacuum systems.

• others

Wide wavelength range [200nm~2000nm], ultra-high brightness, high stability.

The Hyperchromator is a wavelength-variable light source that uses ISTEQ's laser-excited white light source, the XWS-30, as its light source. A module developed specifically for the ISTEQ XWS-30 efficiently captures light from the XWS-30 and extracts certain wavelengths of that light using a grating-based spectral method. As a result, it serves as a wavelength-variable light source that leverages the strengths of the XWS-30, including a wide wavelength range, extremely small light emission point, ultra-high brightness, and high stability. 【Features】 - Wide wavelength range from UV to NIR (200–2000nm) - High brightness (due to the high brightness of the light source and increased transmittance from reduced slit size in the I/F section) - Portable size (47 x 45 x 25 cm; 16kg) - Selectable grating configurations - High cost performance due to long lifespan - High stability due to the use of a laser-excited white light source

• others

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

More and more companies are trying to address the increasingly serious shortage of human resources through employee development. However, there are some concerns regarding effective training... ✓ We want to improve the skills of new and existing employees. ✓ There are no instructors or training know-how within the company. ✓ The cost of training is high and does not reach all employees. To address these concerns, "Human Resource Development Professionals, PC Assist Co., Ltd." and "Subsidy Professionals, Social Insurance Labor Consultant Corporation Management Center" will respond! We will thoroughly explain ways to secure human resources while keeping costs down. Please feel free to join us.

ES Waternet Co., Ltd. will exhibit at the 12th International Smart Agriculture Expo held at Makuhari Messe. We will showcase various products including the "Valve Remote Monitoring and Control System OMEGA," which allows for the setting, operation, and monitoring of irrigation programs, including various sensor controls, remotely via PC or smartphone through the cloud; the "Micro Fogger Set," ideal for cooling and humidifying with fine mist in greenhouses and livestock barns; and the "ES Nutrient Cultivation System," which packages automatic irrigation timers, solenoid valves, liquid fertilizer injectors, pressure control valves, air valves, and filters necessary for cultivation in greenhouses. We look forward to welcoming you to our booth.

When conducting structural analysis of organic compounds, IR, NMR, and MS can be considered the three sacred treasures. If the analysis is performed correctly, it is possible to elucidate the structure of even quite complex compounds. However, actual spectra are often not of a single compound, as seen in textbooks, which can lead to significant challenges in interpreting results for beginners in analysis. Additionally, while database searches are a useful tool in structural analysis, the ability to read spectra is necessary to select the correct structure from among the candidates, not just pattern matching. In this course, we will lecture on the basic ways to interpret IR, NMR, and MS spectra, including simple explanations of principles, points to be aware of during analysis, and how to proceed with actual analysis, incorporating some exercises as well.

We will be exhibiting at the "Livestock Materials EXPO" held at Makuhari Messe! We plan to showcase examples of our "Fermentation Drying Equipment for Livestock Manure," provide information on our "Composting Equipment and Deodorants," and introduce our "Subsidy Projects." Please feel free to stop by our booth. We will give a small gift to those who fill out our survey or have implemented our composting system! We look forward to meeting everyone. = Exhibition Information = Dates: October 1 (Wednesday) to October 3 (Friday), 2025, for three days from 10:00 to 17:00 Venue: Makuhari Messe, Halls 5-7, 9, and 10 2-1 Nakase, Mihama-ku, Chiba City Booth Number: Hall 9, 35-6